Replace the manual cpufreq_cpu_put() with __free(put_cpufreq_policy)
annotation for policy references. This reduces the risk of reference
counting mistakes and aligns the code with the latest kernel style.
No functional change intended.
Signed-off-by: Zihuan Zhang <zhangzihuan@kylinos.cn>
[ Viresh: Minor changes ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Replace the manual cpufreq_cpu_put() with __free(put_cpufreq_policy)
annotation for policy references. This reduces the risk of reference
counting mistakes and aligns the code with the latest kernel style.
No functional change intended.
Signed-off-by: Zihuan Zhang <zhangzihuan@kylinos.cn>
[ Viresh: Minor changes ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Replace the manual cpufreq_cpu_put() with __free(put_cpufreq_policy)
annotation for policy references. This reduces the risk of reference
counting mistakes and aligns the code with the latest kernel style.
No functional change intended.
Signed-off-by: Zihuan Zhang <zhangzihuan@kylinos.cn>
[ Viresh: Minor changes to commit log ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The information present in this file is outdated and doesn't serve any
purpose with the current design of the driver.
Remove the outdated file.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[ Viresh: Rewrite commit log ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The 1GHz OPP is supported on speed grade "O" as well according to the
device datasheet [0], so fix the opp-supported-hw property to support
this speed grade for 1GHz OPP.
[0] https://www.ti.com/lit/gpn/am62p
Fixes: 76d855f058 ("arm64: dts: ti: k3-am62p: add opp frequencies")
Cc: stable@vger.kernel.org
Signed-off-by: Judith Mendez <jm@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
More silicon revisions are being defined for AM62x, AM62Px, and AM62ax
SoCs. These silicon may also support currently establishes OPPs, so remove
the revision limitation in ti-cpufreq and thus determine if an OPP applies
with speed grade efuse parsing.
Signed-off-by: Judith Mendez <jm@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
As the AM62Px SoC family matures more speed grades are being defined.
Add support for speed grades U and T which both support all currently
established OPPs.
Signed-off-by: Judith Mendez <jm@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add support for TI K3 AM62D2 SoC to read speed and revision values
from hardware and pass to OPP layer. AM62D shares the same configuations
as AM62A so use existing am62a7_soc_data.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add ti,am62d2 SoC to the blacklist as the ti-cpufreq driver will handle
creating the cpufreq-dt platform device after it completes and ensure
it is not created twice.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The IS_ERR_OR_NULL check for priv->fdvfs is inappropriate, and should be
an IS_ERR check instead, as a NULL value here would propagate it to
PTR_ERR.
In practice, there is no problem here, as devm_of_iomap cannot return
NULL in any circumstance. However, it causes a Smatch static checker
warning.
Fix the warning by changing the check from IS_ERR_OR_NULL to IS_ERR.
Fixes: 32e0d669f3 ("cpufreq: mediatek-hw: Add support for MT8196")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-pm/aKQubSEXH1TXQpnR@stanley.mountain/
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Broadcom STB platforms were early adopters (2017) of the SCMI framework and as
a result, not all deployed systems have a Device Tree entry where SCMI
protocol 0x13 (PERFORMANCE) is declared as a clock provider, nor are the
CPU Device Tree node(s) referencing protocol 0x13 as their clock
provider. This was clarified in commit e11c480b6d ("dt-bindings:
firmware: arm,scmi: Extend bindings for protocol@13") in 2023.
For those platforms, we allow the checks done by scmi_dev_used_by_cpus()
to continue, and in the event of not having done an early return, we key
off the documented compatible string and give them a pass to continue to
use scmi-cpufreq.
Fixes: 6c9bb86922 ("cpufreq: scmi: Skip SCMI devices that aren't used by the CPUs")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Unsafe code in CpumaskVar's methods assumes that the type has the same
layout as `bindings::cpumask_var_t`. This is not guaranteed by
the default struct representation in Rust, but requires specifying the
`transparent` representation.
Fixes: 8961b8cb30 ("rust: cpumask: Add initial abstractions")
Signed-off-by: Baptiste Lepers <baptiste.lepers@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The prefix as_* shouldn't be used for constructors. For further
motivation, see commit 2f5606afa4 ("device: rust: rename
Device::as_ref() to Device::from_raw()").
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Forgot to update the MAINTAINERS file in the initial patch that landed
the driver. Add myself as the maintainer for this driver.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
IPQ5424 have different OPPs available for the CPU based on
SoC variant. This can be determined through use of an eFuse
register present in the silicon.
Added support for ipq5424 on nvmem driver which helps to
determine OPPs at runtime based on the eFuse register which
has the CPU frequency limits. opp-supported-hw dt binding
can be used to indicate the available OPPs for each limit.
nvmem driver also creates the "cpufreq-dt" platform_device after
passing the version matching data to the OPP framework so that the
cpufreq-dt handles the actual cpufreq implementation.
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
[ Changed '!=' based check to '==' based check ]
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
New Airoha AN7583 SoC use the same exact logic to control the CPU
frequency. Add the Device compatible to the block list for
cpufreq-dt-plat and to the Airoha CPUFreq driver compatible list.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The MT8196 SoC uses DVFS to set a desired target frequency for each CPU
core. It also uses slightly different register offsets.
Add support for it, which necessitates reworking how the mmio regs are
acquired, as mt8196 has the fdvfs register before the performance domain
registers.
I've verified with both `sysbench cpu run` and `head -c 10G \
/dev/urandom | pigz -p 8 -c - | pv -ba > /dev/null` that we don't just
get a higher reported clock frequency, but that the observed performance
also increases, by a factor of 2.64 in an 8 thread sysbench test.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogiaocchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
As it stood, the mediatek cpufreq driver could get away with never
really having a private driver instance struct. This is because all data
was stored in the per-domain structs.
However, this complicates matters when actual per-instance data like the
variant struct is introduced. Instead of having a pointer to it for
every domain, have a pointer to a global "priv" struct that can be
extended over time, and rename the "data" struct to "domain" to
distinguish its purpose better.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
While the driver could get away with having the per-compatible match
data just be an array of the reg offsets, the only thing it used it for
right now, this doesn't really allow it to be extended in any meaningful
way if some other per-variant information needs to be communicated.
In preparation of adding support for hybrid "FDVFS" for MT8196, refactor
the code to make the DT match data a struct, which currently only
contains a single member: the reg offsets. This will allow this struct
to be extended with other members for other hardware variants.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The MediaTek MT8196 SoC has new cpufreq hardware, with added memory
register ranges to control Dynamic-Voltage-Frequency-Scaling.
The DVFS hardware is controlled through a set of registers referred to
as "FDVFS". They set the target frequency the DVFS hardware should aim
for for each performance domain.
Instead of working around the old binding and its already established
meanings for the reg items, add a new binding. The FDVFS register memory
region is at the beginning, which allows us to easily expand this
binding for future SoCs which may have more than 3 performance domains.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Pull turbostat updates from Len Brown:
"tools/power turbostat: version 2025.09.09
- Probe and display L3 Cache topology
- Add ability to average an added counter (useful for pre-integrated
"counters", such as Watts)
- Break the limit of 64 built-in counters
- Assorted bug fixes and minor feature tweaks"
* tag 'turbostat-2025.09.09' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2025.09.09
tools/power turbostat: Handle non-root legacy-uncore sysfs permissions
tools/power turbostat: standardize PER_THREAD_PARAMS
tools/power turbostat: Fix DMR support
tools/power turbostat: add format "average" for external attributes
tools/power turbostat: delete GET_PKG()
tools/power turbostat: probe and display L3 cache topology
tools/power turbostat: Support more than 64 built-in-counters
tools/power turbostat.8: Document Totl%C0, Any%C0, GFX%C0, CPUGFX% columns
tools/power turbostat: Fix bogus SysWatt for forked program
tools/power turbostat: Handle cap_get_proc() ENOSYS
tools/power turbostat: Fix build with musl
tools/power turbostat: verify arguments to params --show and --hide
tools/power turbostat: regression fix: --show C1E%
Pull smp fixes from Borislav Petkov:
- Remove an obsolete comment and fix spelling
* tag 'smp_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Remove obsolete comment from takedown_cpu()
smp: Fix spelling in on_each_cpu_cond_mask()'s doc-comment
Pull irq fixes from Borislav Petkov:
- Fix a wrong ioremap size in mvebu-gicp
- Remove yet another compile-test case for a driver which needs an
additional dependency
- Fix a lock inversion scenario in the IRQ unit test suite
- Remove an impossible flag situation in gic-v5
- Do not iounmap resources in gic-v5 which are managed by devm
- Make sure stale, left-over interrupts in mvebu-gicp are cleared on
driver init
- Fix a reference counting mishap in msi-lib
- Fix a dereference-before-null-ptr-check case in the riscv-imsic
irqchip driver
* tag 'irq_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mvebu-gicp: Use resource_size() for ioremap()
irqchip: Build IMX_MU_MSI only on ARM
genirq/test: Resolve irq lock inversion warnings
irqchip/gic-v5: Remove IRQD_RESEND_WHEN_IN_PROGRESS for ITS IRQs
irqchip/gic-v5: iwb: Fix iounmap probe failure path
irqchip/mvebu-gicp: Clear pending interrupts on init
irqchip/msi-lib: Fix fwnode refcount in msi_lib_irq_domain_select()
irqchip/riscv-imsic: Don't dereference before NULL pointer check
Pull x86 fixes from Borislav Petkov:
- Fix an interrupt vector setup race which leads to a non-functioning
device
- Add new Intel CPU models *and* a family: 0x12. Finally. Yippie! :-)
* tag 'x86_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Plug vector setup race
x86/cpu: Add new Intel CPU model numbers for Wildcatlake and Novalake
Pull locking fix from Borislav Petkov:
- Prevent a futex hash leak due to different mm lifetimes
* tag 'locking_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Move futex cleanup to __mmdrop()
Probe and display L3 Cache topology
Add ability to average an added counter
(useful for pre-integrated "counters", such as Watts)
Break the limit of 64 built-in counters.
Assorted bug fixes and minor feature tweaks
Signed-off-by: Len Brown <len.brown@intel.com>
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/
may be readable by all, but
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/current_freq_khz
may be readable only by root.
Non-root turbostat users see complaints in this scenario.
Fail probe of the interface if we can't read current_freq_khz.
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Original-patch-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Together with the RAPL MSRs, there are more MSRs gone on DMR, including
PLR (Perf Limit Reasons), and IRTL (Package cstate Interrupt Response
Time Limit) MSRs. The configurable TDP info should also be retrieved
from TPMI based Intel Speed Select Technology feature.
Remove the access of these MSRs for DMR. Improve the DMR platform
feature table to make it more readable at the same time.
Fixes: 83075bd59d ("tools/power turbostat: Add initial support for DMR")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
External atributes with format "raw" are not printed in summary lines
for nodes/packages (or with option -S). The new format "average"
behaves like "raw" but also adds the summary data
Signed-off-by: Michael Hebenstreit <michael.hebenstreit@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
We have out-grown the ability to use a 64-bit memory location
to inventory every possible built-in counter.
Leverage the the CPU_SET(3) macros to break this barrier.
Also, break the Joules & Watts counters into two,
since we can no longer 'or' them together...
Signed-off-by: Len Brown <len.brown@intel.com>
Pull TTY fix from Greg KH:
"Here is a single revert of one of the previous patches that went in
the last tty/serial merge that is breaking userspace on some platforms
(specifically powerpc, probably a few others.)
It accidentially changed the ioctl values of some tty ioctls, which
breaks xorg.
The revert has been in linux-next all this week with no reported
issues"
* tag 'tty-6.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "tty: vt: use _IO() to define ioctl numbers"
Pull EFI updates from Ard Biesheuvel:
- Expose the OVMF firmware debug log via sysfs
- Lower the default log level for the EFI stub to avoid corrupting any
splash screens with unimportant diagnostic output
* tag 'efi-next-for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: add API doc entry for ovmf_debug_log
efistub: Lower default log level
efi: add ovmf debug log driver
Pull bpf fixes from Alexei Starovoitov:
- Fix memory leak of bpf_scc_info objects (Eduard Zingerman)
- Fix a regression in the 'perf' tool caused by moving UID filtering to
BPF (Ilya Leoshkevich)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
perf bpf-filter: Enable events manually
libbpf: Add the ability to suppress perf event enablement
bpf: Fix memory leak of bpf_scc_info objects
Pull more block updates from Jens Axboe:
- MD pull request via Yu:
- mddev null-ptr-dereference fix, by Erkun
- md-cluster fail to remove the faulty disk regression fix, by
Heming
- minor cleanup, by Li Nan and Jinchao
- mdadm lifetime regression fix reported by syzkaller, by Yu Kuai
- MD pull request via Christoph
- add support for getting the FDP featuee in fabrics passthru path
(Nitesh Shetty)
- add capability to connect to an administrative controller
(Kamaljit Singh)
- fix a leak on sgl setup error (Keith Busch)
- initialize discovery subsys after debugfs is initialized
(Mohamed Khalfella)
- fix various comment typos (Bjorn Helgaas)
- remove unneeded semicolons (Jiapeng Chong)
- nvmet debugfs ordering issue fix
- Fix UAF in the tag_set in zloop
- Ensure sbitmap shallow depth covers entire set
- Reduce lock roundtrips in io context lookup
- Move scheduler tags alloc/free out of elevator and freeze lock, to
fix some lockdep found issues
- Improve robustness of queue limits checking
- Fix a regression with IO priorities, if no io context exists
* tag 'block-6.17-20250808' of git://git.kernel.dk/linux: (26 commits)
lib/sbitmap: make sbitmap_get_shallow() internal
lib/sbitmap: convert shallow_depth from one word to the whole sbitmap
nvmet: exit debugfs after discovery subsystem exits
block, bfq: Reorder struct bfq_iocq_bfqq_data
md: make rdev_addable usable for rcu mode
md/raid1: remove struct pool_info and related code
md/raid1: change r1conf->r1bio_pool to a pointer type
block: ensure discard_granularity is zero when discard is not supported
zloop: fix KASAN use-after-free of tag set
block: Fix default IO priority if there is no IO context
nvme: fix various comment typos
nvme-auth: remove unneeded semicolon
nvme-pci: fix leak on sgl setup error
nvmet: initialize discovery subsys after debugfs is initialized
nvme: add capability to connect to an administrative controller
nvmet: add support for FDP in fabrics passthru path
md: rename recovery_cp to resync_offset
md/md-cluster: handle REMOVE message earlier
md: fix create on open mddev lifetime regression
block: fix potential deadlock while running nr_hw_queue update
...
Pull io_uring fixes from Jens Axboe:
- Allow vectorized payloads for send/send-zc - like sendmsg, but
without the hassle of a msghdr.
- Fix for an integer wrap that should go to stable, spotted by syzbot.
Nothing alarming here, as you need to be root to hit this.
Nevertheless, it should get fixed.
FWIW, kudos to the syzbot crew for having much nicer reproducers now,
and with nicely annotated source code as well. This is particularly
useful as syzbot uses the raw interface rather than liburing,
historically it's been difficult to turn a syzbot reproducer into a
meaningful test case. With the recent changes, not true anymore!
* tag 'io_uring-6.17-20250808' of git://git.kernel.dk/linux:
io_uring/memmap: cast nr_pages to size_t before shifting
io_uring/net: Allow to do vectorized send
Pull spi fixes from Mark Brown:
"There's one fix here for an issue with the CS42L43 where we were
allocating a single property for client devices as just that property
rather than a terminated array of properties like we are supposed to.
We also have an update to the MAINTAINERS file for some Renesas
devices"
* tag 'spi-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cs42l43: Property entry should be a null-terminated array
MAINTAINERS: Add entries for the RZ/V2H(P) RSPI
Pull regulator fix from Mark Brown:
"This fixes an issue with the newly added code for handling large
voltage changes on regulators which require that individual voltage
changes cover a limited range, the check for convergence was broken"
* tag 'regulator-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: correct convergence check in regulator_set_voltage()
Pull regmap fixes from Mark Brown:
"These patches fix a lockdep issue Russell King reported with nested
regmap-irqs (unusual since regmap is generally for devices on slow
buses so devices don't get nested), plus add a missing mutex free
which I noticed while implementing a fix for that issue"
* tag 'regmap-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: irq: Avoid lockdep warnings with nested regmap-irq chips
regmap: irq: Free the regmap-irq mutex
Pull pci fix from Bjorn Helgaas:
- Fix vmd MSI interrupt domain restructure that caused crash early in
boot (Nam Cao)
* tag 'pci-v6.17-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: vmd: Fix wrong kfree() in vmd_msi_free()
Pull mailbox updates from Jassi Brar:
- aspeed: add driver and bindings for ast2700
- broadcom: add driver and bindings for bcm74110
- mediatek: fix RPM api usage
- qcom: use dev_fwnode
- pcc: support shared buffer
- misc dt-bindings cleanup
* tag 'mailbox-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox/pcc: support mailbox management of the shared buffer
mailbox: bcm74110: Fix spelling mistake
mailbox: bcm74110: remove unneeded semicolon
mailbox: aspeed: add mailbox driver for AST27XX series SoC
dt-bindings: mailbox: Add ASPEED AST2700 series SoC
dt-bindings: mailbox: Drop consumers example DTS
dt-bindings: mailbox: nvidia,tegra186-hsp: Use generic node name
dt-bindings: mailbox: Correct example indentation
dt-bindings: mailbox: ti,secure-proxy: Add missing reg maxItems
dt-bindings: mailbox: amlogic,meson-gxbb-mhu: Add missing interrupts maxItems
dt-bindings: mailbox: qcom-ipcc: document the Milos Inter-Processor Communication Controller
mailbox: Add support for bcm74110
dt-bindings: mailbox: Add support for bcm74110
mailbox: Use dev_fwnode()
mailbox: mtk-cmdq: Switch to pm_runtime_put_autosuspend()
Pull gpio updates from Bartosz Golaszewski:
"As discussed: there's a small commit that removes the legacy GPIO line
value setter callbacks as they're no longer used and a big, treewide
commit that renames the new ones to the old names across all GPIO
drivers at once.
While at it: there are also two fixes that I picked up over the course
of the merge window:
- remove unused, legacy GPIO line value setters from struct gpio_chip
- rename the new set callbacks back to the original names treewide
- fix interrupt handling in gpio-mlxbf2
- revert a buggy immutable irqchip conversion"
* tag 'gpio-updates-for-v6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
treewide: rename GPIO set callbacks back to their original names
gpio: remove legacy GPIO line value setter callbacks
gpio: mlxbf2: use platform_get_irq_optional()
Revert "gpio: pxa: Make irq_chip immutable"
