commit 0935ee6032 ("selftests: netfilter: add test case for recent mismatch bug")
added a regression check for incorrect initial fill of the result map
that was fixed with 791a615b7a ("netfilter: nf_set_pipapo: fix initial map fill").
The test used 'nft get element', i.e., control plane checks for
match/nomatch results.
The control plane however doesn't use avx2 version, so we need to
send+match packets.
As the additional packet match/nomatch is slow, don't do this for
every element added/removed: add and use maybe_send_(no)match
helpers and use them.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The selftest uses following rule:
... @test counter name "test"
Then sends a packet, then checks if the named counter did increment or
not.
This is fine for the 'no-match' test case: If anything matches the
counter increments and the test fails as expected.
But for the 'should match' test cases this isn't optimal.
Consider buggy matching, where the packet matches entry x, but it
should have matched entry y.
In that case the test would erronously pass.
Rework the selftest to use per-element counters to avoid this.
After sending packet that should have matched entry x, query the
relevant element via 'nft reset element' and check that its counter
had incremented.
The 'nomatch' case isn't altered, no entry should match so the named
counter must be 0, changing it to the per-element counter would then
pass if another entry matches.
The downside of this change is a slight increase in test run-time by
a few seconds.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If the first field doesn't cover the entire start map, then we must zero
out the remainder, else we leak those bits into the next match round map.
The early fix was incomplete and did only fix up the generic C
implementation.
A followup patch adds a test case to nft_concat_range.sh.
Fixes: 791a615b7a ("netfilter: nf_set_pipapo: fix initial map fill")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
It's unclear why I originally wrote in the description of
`prepare_to_enable` that "This is not specified in a standard way on
eDP timing diagrams" and then also wrote "It is effectively the time
from HPD going high till you can turn on the backlight." It seems
pretty clear that it's (T4+T5+T6+T8)-min. Either I was confused when I
wrote this or I was looking at some strange panel datasheet that I can
no longer find.
Update the description of the field so it's easier for people to fill
this in. Couch the description with "usually" in case there really was
some weird datasheet where things were specified in a different way.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250521173204.1.Ic0375a9360698592f27afbf1f60f4996d504ed4f@changeid
Timings taken from the datasheet and the display is working in DE mode,
thus the datasheet only specifies the blanking period. sync, back porch
and front porch are arbitrarily chosen.
The datasheet can be found at [1] but for reference these are the
relevant timings:
sym | | min | typ | max | unit |
------|--------------+------+------+------+------+
Tv | V period | 1094 | 1130 | 1836 | Th |
| V active | 1080 | 1080 | 1080 | Th |
| V blanking | 14 | 50 | 756 | Th |
Fv | V frequency | 49 | 60 | 76 | Hz |
Th | H period | 1000 | 1050 | 1678 | Tclk |
| H active | 960 | 960 | 960 | Tclk |
| H blanking | 40 | 90 | 718 | Tclk |
Fh | H frequency | 53.7 | 67.8 | 90.0 | kHz |
Tclk | LVDS clock | 53.7 | 71.2 | 90.0 | MHz |
Keep in mind that this is a dual link LVDS panel and the horizontal
timings are only for one half of the panel.
[1] https://www.fortec-integrated.de/fileadmin/pdf/produkte/TFT-Displays/AUO/P238HAN01.0_Datasheet.pdf
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250520074439.655749-2-mwalle@kernel.org
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- KUnit '#[test]'s:
- Support KUnit-mapped 'assert!' macros.
The support that landed last cycle was very basic, and the
'assert!' macros panicked since they were the standard library
ones. Now, they are mapped to the KUnit ones in a similar way to
how is done for doctests, reusing the infrastructure there.
With this, a failing test like:
#[test]
fn my_first_test() {
assert_eq!(42, 43);
}
will report:
# my_first_test: ASSERTION FAILED at rust/kernel/lib.rs:251
Expected 42 == 43 to be true, but is false
# my_first_test.speed: normal
not ok 1 my_first_test
- Support tests with checked 'Result' return types.
The return value of test functions that return a 'Result' will
be checked, thus one can now easily catch errors when e.g. using
the '?' operator in tests.
With this, a failing test like:
#[test]
fn my_test() -> Result {
f()?;
Ok(())
}
will report:
# my_test: ASSERTION FAILED at rust/kernel/lib.rs:321
Expected is_test_result_ok(my_test()) to be true, but is false
# my_test.speed: normal
not ok 1 my_test
- Add 'kunit_tests' to the prelude.
- Clarify the remaining language unstable features in use.
- Compile 'core' with edition 2024 for Rust >= 1.87.
- Workaround 'bindgen' issue with forward references to 'enum' types.
- objtool: relax slice condition to cover more 'noreturn' functions.
- Use absolute paths in macros referencing 'core' and 'kernel'
crates.
- Skip '-mno-fdpic' flag for bindgen in GCC 32-bit arm builds.
- Clean some 'doc_markdown' lint hits -- we may enable it later on.
'kernel' crate:
- 'alloc' module:
- 'Box': support for type coercion, e.g. 'Box<T>' to 'Box<dyn U>'
if 'T' implements 'U'.
- 'Vec': implement new methods (prerequisites for nova-core and
binder): 'truncate', 'resize', 'clear', 'pop',
'push_within_capacity' (with new error type 'PushError'),
'drain_all', 'retain', 'remove' (with new error type
'RemoveError'), insert_within_capacity' (with new error type
'InsertError').
In addition, simplify 'push' using 'spare_capacity_mut', split
'set_len' into 'inc_len' and 'dec_len', add type invariant 'len
<= capacity' and simplify 'truncate' using 'dec_len'.
- 'time' module:
- Morph the Rust hrtimer subsystem into the Rust timekeeping
subsystem, covering delay, sleep, timekeeping, timers. This new
subsystem has all the relevant timekeeping C maintainers listed
in the entry.
- Replace 'Ktime' with 'Delta' and 'Instant' types to represent a
duration of time and a point in time.
- Temporarily add 'Ktime' to 'hrtimer' module to allow 'hrtimer'
to delay converting to 'Instant' and 'Delta'.
- 'xarray' module:
- Add a Rust abstraction for the 'xarray' data structure. This
abstraction allows Rust code to leverage the 'xarray' to store
types that implement 'ForeignOwnable'. This support is a
dependency for memory backing feature of the Rust null block
driver, which is waiting to be merged.
- Set up an entry in 'MAINTAINERS' for the XArray Rust support.
Patches will go to the new Rust XArray tree and then via the
Rust subsystem tree for now.
- Allow 'ForeignOwnable' to carry information about the pointed-to
type. This helps asserting alignment requirements for the
pointer passed to the foreign language.
- 'container_of!': retain pointer mut-ness and add a compile-time
check of the type of the first parameter ('$field_ptr').
- Support optional message in 'static_assert!'.
- Add C FFI types (e.g. 'c_int') to the prelude.
- 'str' module: simplify KUnit tests 'format!' macro, convert
'rusttest' tests into KUnit, take advantage of the '-> Result'
support in KUnit '#[test]'s.
- 'list' module: add examples for 'List', fix path of
'assert_pinned!' (so far unused macro rule).
- 'workqueue' module: remove 'HasWork::OFFSET'.
- 'page' module: add 'inline' attribute.
'macros' crate:
- 'module' macro: place 'cleanup_module()' in '.exit.text' section.
'pin-init' crate:
- Add 'Wrapper<T>' trait for creating pin-initializers for wrapper
structs with a structurally pinned value such as 'UnsafeCell<T>' or
'MaybeUninit<T>'.
- Add 'MaybeZeroable' derive macro to try to derive 'Zeroable', but
not error if not all fields implement it. This is needed to derive
'Zeroable' for all bindgen-generated structs.
- Add 'unsafe fn cast_[pin_]init()' functions to unsafely change the
initialized type of an initializer. These are utilized by the
'Wrapper<T>' implementations.
- Add support for visibility in 'Zeroable' derive macro.
- Add support for 'union's in 'Zeroable' derive macro.
- Upstream dev news: streamline CI, fix some bugs. Add new workflows
to check if the user-space version and the one in the kernel tree
have diverged. Use the issues tab [1] to track them, which should
help folks report and diagnose issues w.r.t. 'pin-init' better.
[1] https://github.com/rust-for-linux/pin-init/issues
Documentation:
- Testing: add docs on the new KUnit '#[test]' tests.
- Coding guidelines: explain that '///' vs. '//' applies to private
items too. Add section on C FFI types.
- Quick Start guide: update Ubuntu instructions and split them into
"25.04" and "24.04 LTS and older".
And a few other cleanups and improvements"
* tag 'rust-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (78 commits)
rust: list: Fix typo `much` in arc.rs
rust: check type of `$ptr` in `container_of!`
rust: workqueue: remove HasWork::OFFSET
rust: retain pointer mut-ness in `container_of!`
Documentation: rust: testing: add docs on the new KUnit `#[test]` tests
Documentation: rust: rename `#[test]`s to "`rusttest` host tests"
rust: str: take advantage of the `-> Result` support in KUnit `#[test]`'s
rust: str: simplify KUnit tests `format!` macro
rust: str: convert `rusttest` tests into KUnit
rust: add `kunit_tests` to the prelude
rust: kunit: support checked `-> Result`s in KUnit `#[test]`s
rust: kunit: support KUnit-mapped `assert!` macros in `#[test]`s
rust: make section names plural
rust: list: fix path of `assert_pinned!`
rust: compile libcore with edition 2024 for 1.87+
rust: dma: add missing Markdown code span
rust: task: add missing Markdown code spans and intra-doc links
rust: pci: fix docs related to missing Markdown code spans
rust: alloc: add missing Markdown code span
rust: alloc: add missing Markdown code spans
...
Pull smb server updates from Steve French:
"Four smb3 server fixes:
- Fix for special character handling when mounting with "posix"
- Fix for mounts from Mac for fs that don't provide unique inode
numbers
- Two cleanup patches (e.g. for crypto calls)"
* tag '6.16-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: allow a filename to contain special characters on SMB3.1.1 posix extension
ksmbd: provide zero as a unique ID to the Mac client
ksmbd: remove unnecessary softdep on crc32
ksmbd: use SHA-256 library API instead of crypto_shash API
Pull more bcachefs updates from Kent Overstreet:
"More bcachefs updates:
- More stack usage improvements (~600 bytes)
- Define CLASS()es for some commonly used types, and convert most
rcu_read_lock() uses to the new lock guards
- New introspection:
- Superblock error counters are now available in sysfs:
previously, they were only visible with 'show-super', which
doesn't provide a live view
- New tracepoint, error_throw(), which is called any time we
return an error and start to unwind
- Repair
- check_fix_ptrs() can now repair btree node roots
- We can now repair when we've somehow ended up with the journal
using a superblock bucket
- Revert some leftovers from the aborted directory i_size feature,
and add repair code: some userspace programs (e.g. sshfs) were
getting confused
It seems in 6.15 there's a bug where i_nlink on the vfs inode has been
getting incorrectly set to 0, with some unfortunate results;
list_journal analysis showed bch2_inode_rm() being called (by
bch2_evict_inode()) when it clearly should not have been.
- bch2_inode_rm() now runs "should we be deleting this inode?" checks
that were previously only run when deleting unlinked inodes in
recovery
- check_subvol() was treating a dangling subvol (pointing to a
missing root inode) like a dangling dirent, and deleting it. This
was the really unfortunate one: check_subvol() will now recreate
the root inode if necessary
This took longer to debug than it should have, and we lost several
filesystems unnecessarily, because users have been ignoring the
release notes and blindly running 'fsck -y'. Debugging required
reconstructing what happened through analyzing the journal, when
ideally someone would have noticed 'hey, fsck is asking me if I want
to repair this: it usually doesn't, maybe I should run this in dry run
mode and check what's going on?'
As a reminder, fsck errors are being marked as autofix once we've
verified, in real world usage, that they're working correctly; blindly
running 'fsck -y' on an experimental filesystem is playing with fire
Up to this incident we've had an excellent track record of not losing
data, so let's try to learn from this one
This is a community effort, I wouldn't be able to get this done
without the help of all the people QAing and providing excellent bug
reports and feedback based on real world usage. But please don't
ignore advice and expect me to pick up the pieces
If an error isn't marked as autofix, and it /is/ happening in the
wild, that's also something I need to know about so we can check it
out and add it to the autofix list if repair looks good. I haven't
been getting those reports, and I should be; since we don't have any
sort of telemetry yet I am absolutely dependent on user reports
Now I'll be spending the weekend working on new repair code to see if
I can get a filesystem back for a user who didn't have backups"
* tag 'bcachefs-2025-06-04' of git://evilpiepirate.org/bcachefs: (69 commits)
bcachefs: add cond_resched() to handle_overwrites()
bcachefs: Make journal read log message a bit quieter
bcachefs: Fix subvol to missing root repair
bcachefs: Run may_delete_deleted_inode() checks in bch2_inode_rm()
bcachefs: delete dead code from may_delete_deleted_inode()
bcachefs: Add flags to subvolume_to_text()
bcachefs: Fix oops in btree_node_seq_matches()
bcachefs: Fix dirent_casefold_mismatch repair
bcachefs: Fix bch2_fsck_rename_dirent() for casefold
bcachefs: Redo bch2_dirent_init_name()
bcachefs: Fix -Wc23-extensions in bch2_check_dirents()
bcachefs: Run check_dirents second time if required
bcachefs: Run snapshot deletion out of system_long_wq
bcachefs: Make check_key_has_snapshot safer
bcachefs: BCH_RECOVERY_PASS_NO_RATELIMIT
bcachefs: bch2_require_recovery_pass()
bcachefs: bch_err_throw()
bcachefs: Repair code for directory i_size
bcachefs: Kill un-reverted directory i_size code
bcachefs: Delete redundant fsck_err()
...
While misaligned_access_speed was defined in a file compile with
CONFIG_RISCV_MISALIGNED, its definition was under
CONFIG_RISCV_SCALAR_MISALIGNED. This resulted in compilation problems
when using it in a file compiled with CONFIG_RISCV_MISALIGNED.
Move the declaration under CONFIG_RISCV_MISALIGNED so that it can be
used unconditionnally when compiled with that config and remove the check
for that variable in traps_misaligned.c.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20250523101932.1594077-9-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
schedule_on_each_cpu() was used without any good reason while documented
as very slow. This call was in the boot path, so better use
on_each_cpu() for scalar misaligned checking. Vector misaligned check
still needs to use schedule_on_each_cpu() since it requires irqs to be
enabled but that's less of a problem since this code is ran in a kthread.
Add a comment to explicit that.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20250523101932.1594077-8-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Users seem to be assuming that the 'dropped unflushed entries' message
at the end of journal read indicates some sort of problem, when it does
not - we expect there to be entries in the journal that weren't
commited, it's purely informational so that we can correlate journal
sequence numbers elsewhere when debugging.
Shorten the log message a bit to hopefully make this clearer.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We had a bug where the root inode of a subvolume was erronously deleted:
bch2_evict_inode() called bch2_inode_rm(), meaning the VFS inode's
i_nlink was somehow set to 0 when it shouldn't have - the inode in the
btree indicated it clearly was not unlinked.
This has been addressed with additional safety checks in
bch2_inode_rm() - pulling in the safety checks we already were doing
when deleting unlinked inodes in recovery - but the really disastrous
bug was in check_subvols(), which on finding a dangling subvol (subvol
with a missing root inode) would delete the subvolume.
I assume this bug dates from early check_directory_structure() code,
which originally handled subvolumes and normal paths - the idea being
that still live contents of the subvolume would get reattached
somewhere.
But that's incorrect, and disastrously so; deleting a subvolume triggers
deleting the snapshot ID it points to, deleting the entire contents.
The correct way to repair is to recreate the root inode if it's missing;
then any contents will get reattached under that subvolume's lost+found.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We had a bug where bch2_evict_inode() incorrectly called bch2_inode_rm()
- the journal clearly showed the inode was not unlinked.
We've got checks that we use in recovery when cleaning up deleted
inodes, lift them to bch2_inode_rm() as well.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
btree_update_nodes_written() needs to wait on in-flight writes to old
nodes before marking them as freed. But it has no reason to pin those
old nodes in memory, so some trickyness ensues.
The update we're completing deleted references to those nodes from the
btree, so we know if they've been evicted they can't be pulled back in.
We just have to check if the nodes we have pointers to are still those
old nodes, and haven't been reused.
To do that we check the node's "sequence number" (actually a random 64
bit cookie), but that lives in the node's data buffer. 'struct btree'
can't be freed until filesystem shutdown (as they're quite small), but
the data buffers can be freed or swapped around.
Commit 1f88c35674, which was fixing a kmsan warning, assumed that we
could safely do this locklessly with just a READ_ONCE() - if we've got a
non-null ptr it would be safe to read from.
But that's not true if the data buffer is a vmalloc allocation, so we
need to restore the locking that commit deleted (or alternatively RCU
free those data buffers, but there's no other reason for that).
Fixes: 1f88c35674 ("bcachefs: Fix a KMSAN splat in btree_update_nodes_written()")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Instead of simply recreating a mis-casefolded dirent, use the str_hash
repair code, which will rename it if necessary - the dirent might have
been created again with the correct casefolding.
Factor out out bch2_str_hash_repair key() from
__bch2_str_hash_check_key() for the new path to use, and export
bch2_dirent_create_key() as well.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_fsck_renamed_dirent was creating bch_dirent keys open-coded - but
we need to use the appropriate helper, if the directory is casefolded.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Redo (and simplify somewhat) how casefolded and non casefolded dirents
are initialized, and export this to be used by fsck_rename_dirent().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Clang warns (or errors with CONFIG_WERROR=y):
fs/bcachefs/fsck.c:2325:2: error: label followed by a declaration is a C23 extension [-Werror,-Wc23-extensions]
2325 | int ret = bch2_trans_run(c,
| ^
On clang-17 and older, this is an unconditional error:
fs/bcachefs/fsck.c:2325:2: error: expected expression
2325 | int ret = bch2_trans_run(c,
| ^
Move the declaration of ret to the top of the function to resolve both
ways this issue manifests.
Fixes: c72def5237 ("bcachefs: Run check_dirents second time if required")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pull sched_ext fixes from Tejun Heo:
"Two fixes in the built-in idle selection helpers:
- Fix prev_cpu handling to guarantee that idle selection never
returns a CPU that's not allowed
- Skip cross-node search when !NUMA which could lead to infinite
looping due to a bug in NUMA iterator"
* tag 'sched_ext-for-6.16-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: idle: Skip cross-node search with !CONFIG_NUMA
sched_ext: idle: Properly handle invalid prev_cpu during idle selection
A lockdep fix removed two rdt_last_cmd_clear() calls that were used to
clear the last_cmd_status buffer but called without holding the required
rdtgroup_mutex.
The impacted resctrl commands are writing to the cpus or cpus_list files
and creating a new monitor or control group. With stale data in the
last_cmd_status buffer the impacted resctrl commands report the stale error
on success, or append its own failure message to the stale error on
failure.
Consequently, restore the rdt_last_cmd_clear() calls after acquiring
rdtgroup_mutex.
Fixes: c8eafe1495 ("x86/resctrl: Fix potential lockdep warning")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/all/20250603125828.1590067-1-zengheng4@huawei.com
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Print the actual delay time in pci_bridge_wait_for_secondary_bus()
instead of assuming it was 1000ms (Wilfred Mallawa)
- Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
devices', which broke resume from system sleep on AMD platforms and
has been fixed by other commits (Lukas Wunner)
Resource management:
- Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated
and unnecessary (Philipp Stanner)
- Remove pcim_iounmap_regions() and pcim_request_region_exclusive()
and related flags since all uses have been removed (Philipp
Stanner)
- Rework devres 'request' functions so they are no longer 'hybrid',
i.e., their behavior no longer depends on whether
pcim_enable_device or pci_enable_device() was used, and remove
related code (Philipp Stanner)
- Warn (not BUG()) about failure to assign optional resources (Ilpo
Järvinen)
Error handling:
- Log the DPC Error Source ID only when it's actually valid (when
ERR_FATAL or ERR_NONFATAL was received from a downstream device)
and decode into bus/device/function (Bjorn Helgaas)
- Determine AER log level once and save it so all related messages
use the same level (Karolina Stolarek)
- Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable
Errors (Karolina Stolarek)
- Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs
controls on interval and burst count, to avoid flooding logs and
RCU stall warnings (Jon Pan-Doh)
Power management:
- Increment PM usage counter when probing reset methods so we don't
try to read config space of a powered-off device (Alex Williamson)
- Set all devices to D0 during enumeration to ensure ACPI opregion is
connected via _REG (Mario Limonciello)
Power control:
- Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match
the filename paths. Retain old deprecated symbols for
compatibility, except for the pwrctrl slot driver
(PCI_PWRCTRL_SLOT) (Johan Hovold)
- When unregistering pwrctrl, cancel outstanding rescan work before
cleaning up data structures to avoid use-after-free issues (Brian
Norris)
Bandwidth control:
- Simplify link bandwidth controller by replacing the count of Link
Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN
flag (Ilpo Järvinen)
- Update the Link Speed after retraining, since the Link Speed may
have changed (Ilpo Järvinen)
PCIe native device hotplug:
- Ignore Presence Detect Changed caused by DPC.
pciehp already ignores Link Down/Up events caused by DPC, but on
slots using in-band presence detect, DPC causes a spurious Presence
Detect Changed event (Lukas Wunner)
- Ignore Link Down/Up caused by Secondary Bus Reset.
On hotplug ports using in-band presence detect, the reset causes a
Presence Detect Changed event, which mistakenly caused teardown and
re-enumeration of the device. Drivers may need to annotate code
that resets their device (Lukas Wunner)
Virtualization:
- Add an ACS quirk for Loongson Root Ports that don't advertise ACS
but don't allow peer-to-peer transactions between Root Ports; the
quirk allows each Root Port to be in a separate IOMMU group (Huacai
Chen)
Endpoint framework:
- For fixed-size BARs, retain both the actual size and the possibly
larger size allocated to accommodate iATU alignment requirements
(Jerome Brunet)
- Simplify ctrl/SPAD space allocation and avoid allocating more space
than needed (Jerome Brunet)
- Correct MSI-X PBA offset calculations for DesignWare and Cadence
endpoint controllers (Niklas Cassel)
- Align the return value (number of interrupts) encoding for
pci_epc_get_msi()/pci_epc_ops::get_msi() and
pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)
- Align the nr_irqs parameter encoding for
pci_epc_set_msi()/pci_epc_ops::set_msi() and
pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)
Common host controller library:
- Convert pci-host-common to a library so platforms that don't need
native host controller drivers don't need to include these helper
functions (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Extract ECAM bridge creation helper from pci_host_common_probe() to
separate driver-specific things like MSI from PCI things (Marc
Zyngier)
- Dynamically allocate RID-to_SID bitmap to prepare for SoCs with
varying capabilities (Marc Zyngier)
- Skip ports disabled in DT when setting up ports (Janne Grunau)
- Add t6020 compatible string (Alyssa Rosenzweig)
- Add T602x PCIe support (Hector Martin)
- Directly set/clear INTx mask bits because T602x dropped the
accessors that could do this without locking (Marc Zyngier)
- Move port PHY registers to their own reg items to accommodate
T602x, which moves them around; retain default offsets for existing
DTs that lack phy%d entries with the reg offsets (Hector Martin)
- Stop polling for core refclk, which doesn't work on T602x and the
bootloader has already done anyway (Hector Martin)
- Use gpiod_set_value_cansleep() when asserting PERST# in probe
because we're allowed to sleep there (Hector Martin)
Cadence PCIe controller driver:
- Drop a runtime PM 'put' to resolve a runtime atomic count underflow
(Hans Zhang)
- Make the cadence core buildable as a module (Kishon Vijay Abraham I)
- Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by
loadable drivers when they are removed (Siddharth Vadapalli)
Freescale i.MX6 PCIe controller driver:
- Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP
(Richard Zhu)
- Remove redundant dw_pcie_wait_for_link() from
imx_pcie_start_link(); since the DWC core does this, imx6 only
needs it when retraining for a faster link speed (Richard Zhu)
- Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu)
- Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in
some cases, the controller can't exit 'L23 Ready' through Beacon or
PERST# deassertion (Richard Zhu)
- Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum:
controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8
GT/s, causing timeouts in L1 (Richard Zhu)
- Wait for i.MX95 PLL lock before enabling controller (Richard Zhu)
- Save/restore i.MX95 LUT for suspend/resume (Richard Zhu)
Mobiveil PCIe controller driver:
- Return bool (not int) for link-up check in
mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans
Zhang)
NVIDIA Tegra194 PCIe controller driver:
- Create debugfs directory for 'aspm_state_cnt' only when
CONFIG_PCIEASPM is enabled, since there are no other entries (Hans
Zhang)
Qualcomm PCIe controller driver:
- Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
equalization presets (Krishna Chaitanya Chundru)
- Read Maximum Link Width from the Link Capabilities register if DT
lacks 'num-lanes' property (Krishna Chaitanya Chundru)
- Add Physical Layer 64 GT/s Capability ID and register offsets for
8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya
Chundru)
- Add generic dwc support for configuring lane equalization presets
(Krishna Chaitanya Chundru)
- Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)
Renesas R-Car PCIe controller driver:
- Describe endpoint BAR 4 as being fixed size (Jerome Brunet)
- Document how to obtain R-Car V4H (r8a779g0) controller firmware
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Reorder rockchip_pci_core_rsts because
reset_control_bulk_deassert() deasserts in reverse order, to fix a
link training regression (Jensen Huang)
- Mark RK3399 as being capable of raising INTx interrupts (Niklas
Cassel)
Rockchip DesignWare PCIe controller driver:
- Check only PCIE_LINKUP, not LTSSM status, to determine whether the
link is up (Shawn Lin)
- Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s
for Root Complex and Endpoint modes (Shawn Lin)
- Hide the broken ATS Capability in rockchip_pcie_ep_init() instead
of rockchip_pcie_ep_pre_init() so it stays hidden after PERST#
resets non-sticky registers (Shawn Lin)
- Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
(Diederik de Haas)
Synopsys DesignWare PCIe controller driver:
- Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training
more robust; this will not affect the intended link width if all
lanes are functional (Wenbin Yao)
- Return bool (not int) for link-up check in dw_pcie_ops.link_up()
and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay,
keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx,
tegra194, uniphier, visconti (Hans Zhang)
- Add debugfs support for exposing DWC device-specific PTM context
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Make j721e buildable as a loadable and removable module (Siddharth
Vadapalli)
- Fix j721e host/endpoint dependencies that result in link failures
in some configs (Arnd Bergmann)
Device tree bindings:
- Add qcom DT binding for 'global' interrupt (PCIe controller and
link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p,
sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan
Sadhasivam)
- Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074,
ipq8074-gen3, ipq6018 (Manivannan Sadhasivam)
- Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang)
- Correct indentation and style of examples in brcm,stb-pcie,
cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie,
microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm
(Krzysztof Kozlowski)
- Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and
armada8k from text to schema DT bindings (Rob Herring)
- Remove obsolete .txt DT bindings for content that has been moved to
schemas (Rob Herring)
- Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074
and IPQ9574 (Varadarajan Narayanan)
- Convert v3,v360epc-pci from text to DT schema binding (Rob Herring)
- Change microchip,pcie-host DT binding to be 'dma-noncoherent' since
PolarFire may be configured that way (Conor Dooley)
Miscellaneous:
- Drop 'pci' suffix from intel_mid_pci.c filename to match similar
files (Andy Shevchenko)
- All platforms with PCI have an MMU, so add PCI Kconfig dependency
on MMU to simplify build testing and avoid inadvertent build
regressions (Arnd Bergmann)
- Update Krzysztof Wilczyński's email address in MAINTAINERS
(Krzysztof Wilczyński)
- Update Manivannan Sadhasivam's email address in MAINTAINERS
(Manivannan Sadhasivam)"
* tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits)
MAINTAINERS: Update Manivannan Sadhasivam email address
PCI: j721e: Fix host/endpoint dependencies
PCI: j721e: Add support to build as a loadable module
PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup
PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup
PCI: cadence: Add support to build pcie-cadence library as a kernel module
MAINTAINERS: Update Krzysztof Wilczyński email address
PCI: Remove unnecessary linesplit in __pci_setup_bridge()
PCI: WARN (not BUG()) when we fail to assign optional resources
PCI: Remove unused pci_printk()
PCI: qcom: Replace PERST# sleep time with proper macro
PCI: dw-rockchip: Replace PERST# sleep time with proper macro
PCI: host-common: Convert to library for host controller drivers
PCI/ERR: Remove misleading TODO regarding kernel panic
PCI: cadence: Remove duplicate message code definitions
PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
PCI: cadence-ep: Correct PBA offset in .set_msix() callback
...
Inflight marking is used so that do_exit() -> io_uring_files_cancel()
will find requests with files that reference an io_uring instance,
so they can get appropriately canceled before the files go away.
However, it's also called before the mm goes away.
Mark futex/futexv wait requests as being inflight, so that
io_uring_files_cancel() will prune them. This ensures that the mm stays
alive, which is important as an exiting mm will also free the futex
private hash buckets. An io_uring futex request with FUTEX2_PRIVATE
set relies on those being alive until the request has completed. A
recent commit added these futex private hashes, which get killed when
the mm goes away.
Fixes: 80367ad01d ("futex: Add basic infrastructure for local task local hash")
Link: https://lore.kernel.org/io-uring/38053.1749045482@localhost/
Reported-by: Robert Morris <rtm@csail.mit.edu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than use a union of a u32 and struct futex_waitv user address,
consolidate it into a single void __user pointer instead. This also
makes prep easier to use as the store happens to the member that will
be used.
No functional changes in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
