Doing misaligned access to userspace memory would make a trap on
platform where it is emulated. Latest fixes removed the kernel
capability to do unaligned accesses to userspace memory safely since
interrupts are kept disabled at all time during that. Thus doing so
would crash the kernel.
Such behavior was detected with GET_UNALIGN_CTL() that was doing
a put_user() with an unsigned long* address that should have been an
unsigned int*. Reenabling kernel misaligned access emulation is a bit
risky and it would also degrade performances. Rather than doing that,
we will try to avoid any misaligned accessed by using copy_from/to_user()
which does not do any misaligned accesses. This can be done only for
!CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS and thus allows to only generate
a bit more code for this config.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250602193918.868962-4-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Pull arm64 fixes from Will Deacon:
"We've got a couple of build fixes when using LLD, a missing TLB
invalidation and a workaround for broken firmware on SoCs with CPUs
that implement MPAM:
- Disable problematic linker assertions for broken versions of LLD
- Work around sporadic link failure with LLD and various randconfig
builds
- Fix missing invalidation in the TLB batching code when reclaim
races with mprotect() and friends
- Add a command-line override for MPAM to allow booting on systems
with broken firmware"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Add override for MPAM
arm64/mm: Close theoretical race where stale TLB entry remains valid
arm64: Work around convergence issue with LLD linker
arm64: Disable LLD linker ASSERT()s for the time being
Pull ARM fixes from Russell King:
- Fix arch_memremap_can_ram_remap() which incorrectly passed a PFN to
memblock_is_map_memory rather than the actual address.
- Disallow kernel mode NEON when IRQs are disabled
Explanation:
"To avoid having to preserve/restore kernel mode NEON state when
such a softirq is taken softirqs are now disabled when using the
NEON from task context."
should explain that it's nested kernel mode.
In other words, softirqs from user mode are fine, because the context
will be preserved. softirqs from kernel mode may be from a context
that has already saved the user NEON state, and thus we would need to
preserve the NEON state for the parent kernel mode context, and this
we don't allow.
The problem occurs when the kernel context disables hard IRQs, and
then uses NEON. When it's finished, and restores the userspace NEON
state, we call local_bh_enable() with hard IRQs disabled, which
causes a warning.
This commit addresses that by disallowing the use of NEON with hard
IRQs disabled.
https://lore.kernel.org/all/20250516231858.27899-4-ebiggers@kernel.org/T/#m104841b6e9346b1814c8b0fb9f2340551b0cd3e8
has some further context
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9446/1: Disallow kernel mode NEON when IRQs are disabled
ARM: 9447/1: arm/memremap: fix arch_memremap_can_ram_remap()
Björn Töpel <bjorn@kernel.org> says:
From: Björn Töpel <bjorn@rivosinc.com>
Hi!
For over a year ago, Daniel and I was testing the V2 of Song's series.
I also promised to take the V2, that had been sitting on the lists for
too long, to rebase it on a new kernel, and re-test it.
One year later, here's the V3! ;-)
There are no changes from V2 other, than some simple checkpatch
cleanups.
Song's original cover:
| This series makes the kexec_file_load() syscall support to load
| Image binary file. At the same time, corresponding support for
| kexec-tools had been pushed to my repo[2].
|
| Now, we can leverage that kexec-tools and this series to use the
| kexec_load() or kexec_file_load() syscall to boot both vmlinux and
| Image file, as seen in these combo tests:
|
| ```
| 1. kexec -l vmlinux
| 2. kexec -l Image
| 3. kexec -s -l vmlinux
| 4. kexec -s -l Image
| ```
Notably, kexec-tools has still not made it upstream. I've prepared a
branch on my GH [3], that I indend to post ASAP. That branch is a
collection of fixes/features, including Song's userland Image loading.
The V2 is here [2], and V1 [1].
I've tested the kexec-file/Image on qemu-rv64, with following
combinations:
* ACPI/UEFI
* DT/UEFI
* DT
both "regular" kexec (-s + -e), and crashkernels (-p).
Note that there are two purgatory patches that has to be present (part
of -rc1, so all good):
commit 28093cfef5 ("riscv/kexec_file: Handle R_RISCV_64 in purgatory relocator")
commit 3f7023171d ("riscv/purgatory: 4B align purgatory_start")
[1] https://lore.kernel.org/linux-riscv/20230914020044.1397356-1-songshuaishuai@tinylab.org/
[2] https://lore.kernel.org/linux-riscv/20231016092006.3347632-1-songshuaishuai@tinylab.org/
[3] https://github.com/bjoto/kexec-tools/tree/rv-on-master
* patches from https://lore.kernel.org/r/20250409193004.643839-1-bjorn@kernel.org:
riscv: kexec_file: Support loading Image binary file
riscv: kexec_file: Split the loading of kernel and others
Link: https://lore.kernel.org/r/20250409193004.643839-1-bjorn@kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
perf reports that 99.63% of the cycles from `modprobe amdgpu` are spent
inside module_frob_arch_sections(). This is because amdgpu.ko contains
about 300000 relocations in its .rela.text section, and the algorithm in
count_max_entries() takes quadratic time.
Apply two optimizations from the arm64 code, which together reduce the
total execution time by 99.58%. First, sort the relocations so duplicate
entries are adjacent. Second, reduce the number of relocations that must
be sorted by filtering to only relocations that need PLT/GOT entries, as
done in commit d4e0340919 ("arm64/module: Optimize module load time by
optimizing PLT counting").
Unlike the arm64 code, here the filtering and sorting is done in a
scratch buffer, because the HI20 relocation search optimization in
apply_relocate_add() depends on the original order of the relocations.
This allows accumulating PLT/GOT relocations across sections so sorting
and counting is only done once per module.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20250409171526.862481-3-samuel.holland@sifive.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Andy Chiu <andybnac@gmail.com> says:
This series makes atomic code patching in ftrace possible and eliminates
the need of the stop_machine dance. The major difference of this version
is that we merge the CALL_OPS support from Puranjay [1] and make direct
calls available for practical uses such as BPF. Thanks for the time
reviewing the series and suggestions, we hope this version gets a step
closer to happening in the upstream.
Please reference the link to v3 below for more introductory view of the
implementation [2]
Added patch: 2, 4, 10, 11, 12
Modified patch: 5, 6
Unchanged patch: 1, 3, 7, 8, 9
(1, 8 has commit msg modified)
Special thanks to Björn for his efforts on testing and guiding the
series!
[1]: https://lore.kernel.org/lkml/20240306165904.108141-1-puranjay12@gmail.com/
[2]: https://lore.kernel.org/linux-riscv/20241127172908.17149-1-andybnac@gmail.com/
* patches from https://lore.kernel.org/r/20250407180838.42877-1-andybnac@gmail.com:
riscv: Documentation: add a description about dynamic ftrace
riscv: ftrace: support direct call using call_ops
riscv: Implement HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS
riscv: ftrace: support PREEMPT
riscv: add a data fence for CMODX in the kernel mode
riscv: vector: Support calling schedule() for preemptible Vector
riscv: ftrace: do not use stop_machine to update code
riscv: ftrace: prepare ftrace for atomic code patching
kernel: ftrace: export ftrace_sync_ipi
riscv: ftrace: align patchable functions to 4 Byte boundary
riscv: ftrace factor out code defined by !WITH_ARG
riscv: ftrace: support fastcc in Clang for WITH_ARGS
Link: https://lore.kernel.org/r/20250407180838.42877-1-andybnac@gmail.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Apparently sec_base doesn't mean relocated symbol value, which seems a
copy-pasting error in the comment. Assigned with the address of section
indexed by sym->st_shndx, it should represent base address of the
relevant section. Let's fix the comment to avoid possible confusion.
Fixes: 838b3e2848 ("RISC-V: Load purgatory in kexec_file")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20250326073450.57648-2-ziyao@disroot.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
This is the preparative patch for kexec_file_load Image support.
It separates the elf_kexec_load() as two parts:
- the first part loads the vmlinux (or Image)
- the second part loads other segments (e.g. initrd,fdt,purgatory)
And the second part is exported as the load_extra_segments() function
which would be used in both kexec-elf.c and kexec-image.c.
No functional change intended.
Signed-off-by: Song Shuai <songshuaishuai@tinylab.org>
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20250409193004.643839-2-bjorn@kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
This patch enables support for DYNAMIC_FTRACE_WITH_CALL_OPS on RISC-V.
This allows each ftrace callsite to provide an ftrace_ops to the common
ftrace trampoline, allowing each callsite to invoke distinct tracer
functions without the need to fall back to list processing or to
allocate custom trampolines for each callsite. This significantly speeds
up cases where multiple distinct trace functions are used and callsites
are mostly traced by a single tracer.
The idea and most of the implementation is taken from the ARM64's
implementation of the same feature. The idea is to place a pointer to
the ftrace_ops as a literal at a fixed offset from the function entry
point, which can be recovered by the common ftrace trampoline.
We use -fpatchable-function-entry to reserve 8 bytes above the function
entry by emitting 2 4 byte or 4 2 byte nops depending on the presence of
CONFIG_RISCV_ISA_C. These 8 bytes are patched at runtime with a pointer
to the associated ftrace_ops for that callsite. Functions are aligned to
8 bytes to make sure that the accesses to this literal are atomic.
This approach allows for directly invoking ftrace_ops::func even for
ftrace_ops which are dynamically-allocated (or part of a module),
without going via ftrace_ops_list_func.
We've benchamrked this with the ftrace_ops sample module on Spacemit K1
Jupiter:
Without this patch:
baseline (Linux rivos 6.14.0-09584-g7d06015d936c #3 SMP Sat Mar 29
+-----------------------+-----------------+----------------------------+
| Number of tracers | Total time (ns) | Per-call average time |
|-----------------------+-----------------+----------------------------|
| Relevant | Irrelevant | 100000 calls | Total (ns) | Overhead (ns) |
|----------+------------+-----------------+------------+---------------|
| 0 | 0 | 1357958 | 13 | - |
| 0 | 1 | 1302375 | 13 | - |
| 0 | 2 | 1302375 | 13 | - |
| 0 | 10 | 1379084 | 13 | - |
| 0 | 100 | 1302458 | 13 | - |
| 0 | 200 | 1302333 | 13 | - |
|----------+------------+-----------------+------------+---------------|
| 1 | 0 | 13677833 | 136 | 123 |
| 1 | 1 | 18500916 | 185 | 172 |
| 1 | 2 | 22856459 | 228 | 215 |
| 1 | 10 | 58824709 | 588 | 575 |
| 1 | 100 | 505141584 | 5051 | 5038 |
| 1 | 200 | 1580473126 | 15804 | 15791 |
|----------+------------+-----------------+------------+---------------|
| 1 | 0 | 13561000 | 135 | 122 |
| 2 | 0 | 19707292 | 197 | 184 |
| 10 | 0 | 67774750 | 677 | 664 |
| 100 | 0 | 714123125 | 7141 | 7128 |
| 200 | 0 | 1918065668 | 19180 | 19167 |
+----------+------------+-----------------+------------+---------------+
Note: per-call overhead is estimated relative to the baseline case with
0 relevant tracers and 0 irrelevant tracers.
With this patch:
v4-rc4 (Linux rivos 6.14.0-09598-gd75747611c93 #4 SMP Sat Mar 29
+-----------------------+-----------------+----------------------------+
| Number of tracers | Total time (ns) | Per-call average time |
|-----------------------+-----------------+----------------------------|
| Relevant | Irrelevant | 100000 calls | Total (ns) | Overhead (ns) |
|----------+------------+-----------------+------------+---------------|
| 0 | 0 | 1459917 | 14 | - |
| 0 | 1 | 1408000 | 14 | - |
| 0 | 2 | 1383792 | 13 | - |
| 0 | 10 | 1430709 | 14 | - |
| 0 | 100 | 1383791 | 13 | - |
| 0 | 200 | 1383750 | 13 | - |
|----------+------------+-----------------+------------+---------------|
| 1 | 0 | 5238041 | 52 | 38 |
| 1 | 1 | 5228542 | 52 | 38 |
| 1 | 2 | 5325917 | 53 | 40 |
| 1 | 10 | 5299667 | 52 | 38 |
| 1 | 100 | 5245250 | 52 | 39 |
| 1 | 200 | 5238459 | 52 | 39 |
|----------+------------+-----------------+------------+---------------|
| 1 | 0 | 5239083 | 52 | 38 |
| 2 | 0 | 19449417 | 194 | 181 |
| 10 | 0 | 67718584 | 677 | 663 |
| 100 | 0 | 709840708 | 7098 | 7085 |
| 200 | 0 | 2203580626 | 22035 | 22022 |
+----------+------------+-----------------+------------+---------------+
Note: per-call overhead is estimated relative to the baseline case with
0 relevant tracers and 0 irrelevant tracers.
As can be seen from the above:
a) Whenever there is a single relevant tracer function associated with a
tracee, the overhead of invoking the tracer is constant, and does not
scale with the number of tracers which are *not* associated with that
tracee.
b) The overhead for a single relevant tracer has dropped to ~1/3 of the
overhead prior to this series (from 122ns to 38ns). This is largely
due to permitting calls to dynamically-allocated ftrace_ops without
going through ftrace_ops_list_func.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
[update kconfig, asm, refactor]
Signed-off-by: Andy Chiu <andybnac@gmail.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20250407180838.42877-10-andybnac@gmail.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
RISC-V spec explicitly calls out that a local fence.i is not enough for
the code modification to be visble from a remote hart. In fact, it
states:
To make a store to instruction memory visible to all RISC-V harts, the
writing hart also has to execute a data FENCE before requesting that all
remote RISC-V harts execute a FENCE.I.
Although current riscv drivers for IPI use ordered MMIO when sending IPIs
in order to synchronize the action between previous csd writes, riscv
does not restrict itself to any particular flavor of IPI. Any driver or
firmware implementation that does not order data writes before the IPI
may pose a risk for code-modifying race.
Thus, add a fence here to order data writes before making the IPI.
Signed-off-by: Andy Chiu <andybnac@gmail.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20250407180838.42877-8-andybnac@gmail.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Each function entry implies a call to ftrace infrastructure. And it may
call into schedule in some cases. So, it is possible for preemptible
kernel-mode Vector to implicitly call into schedule. Since all V-regs
are caller-saved, it is possible to drop all V context when a thread
voluntarily call schedule(). Besides, we currently don't pass argument
through vector register, so we don't have to save/restore V-regs in
ftrace trampoline.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Link: https://lore.kernel.org/r/20250407180838.42877-7-andybnac@gmail.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
We use an AUIPC+JALR pair to jump into a ftrace trampoline. Since
instruction fetch can break down to 4 byte at a time, it is impossible
to update two instructions without a race. In order to mitigate it, we
initialize the patchable entry to AUIPC + NOP4. Then, the run-time code
patching can change NOP4 to JALR to eable/disable ftrcae from a
function. This limits the reach of each ftrace entry to +-2KB displacing
from ftrace_caller.
Starting from the trampoline, we add a level of indirection for it to
reach ftrace caller target. Now, it loads the target address from a
memory location, then perform the jump. This enable the kernel to update
the target atomically.
The new don't-stop-the-world text patching on change only one RISC-V
instruction:
| -8: &ftrace_ops of the associated tracer function.
| <ftrace enable>:
| 0: auipc t0, hi(ftrace_caller)
| 4: jalr t0, lo(ftrace_caller)
|
| -8: &ftrace_nop_ops
| <ftrace disable>:
| 0: auipc t0, hi(ftrace_caller)
| 4: nop
This means that f+0x0 is fixed, and should not be claimed by ftrace,
e.g. kprobe should be able to put a probe in f+0x0. Thus, we adjust the
offset and MCOUNT_INSN_SIZE accordingly.
[ alex: Fix build errors with !CONFIG_DYNAMIC_FTRACE ]
Co-developed-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Link: https://lore.kernel.org/r/20250407180838.42877-5-andybnac@gmail.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
The following ftrace patch for riscv uses a data store to update ftrace
function. Therefore, a romote fence is required to order it against
function_trace_op updates. The mechanism is similar to the fence between
function_trace_op and update_ftrace_func in the generic ftrace, so we
leverage the same ftrace_sync_ipi function.
[ alex: Fix build warning when !CONFIG_DYNAMIC_FTRACE ]
Signed-off-by: Andy Chiu <andybnac@gmail.com>
Link: https://lore.kernel.org/r/20250407180838.42877-4-andybnac@gmail.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
We are changing ftrace code patching in order to remove dependency from
stop_machine() and enable kernel preemption. This requires us to align
functions entry at a 4-B align address.
However, -falign-functions on older versions of GCC alone was not strong
enoungh to align all functions. In fact, cold functions are not aligned
after turning on optimizations. We consider this is a bug in GCC and
turn off guess-branch-probility as a workaround to align all functions.
GCC bug id: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88345
The option -fmin-function-alignment is able to align all functions
properly on newer versions of gcc. So, we add a cc-option to test if
the toolchain supports it.
Suggested-by: Evgenii Shatokhin <e.shatokhin@yadro.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20250407180838.42877-3-andybnac@gmail.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
The expected flow of operations when using PXP is to query the PXP
status and wait for it to transition to "ready" before attempting to
create an exec_queue. This flow is followed by the Mesa driver, but
there is no guarantee that an incorrectly coded (or malicious) app
will not attempt to create the queue first without querying the status.
Therefore, we need to clarify what the expected behavior of the queue
creation ioctl is in this scenario.
Currently, the ioctl always fails with an -EBUSY code no matter the
error, but for consistency it is better to distinguish between "failed
to init" (-EIO) and "not ready" (-EBUSY), the same way the query ioctl
does. Note that, while this is a change in the return code of an ioctl,
the behavior of the ioctl in this particular corner case was not clearly
spec'd, so no one should have been relying on it (and we know that Mesa,
which is the only known userspace for this, didn't).
v2: Minor rework of the doc (Rodrigo)
Fixes: 72d479601d ("drm/xe/pxp/uapi: Add userspace and LRC support for PXP-using queues")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250522225401.3953243-7-daniele.ceraolospurio@intel.com
(cherry picked from commit 21784ca960)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Customer is reporting a really subtle issue where we get random DMAR
faults, hangs and other nasties for kernel migration jobs when stressing
stuff like s2idle/s3/s4. The explosions seems to happen somewhere
after resuming the system with splats looking something like:
PM: suspend exit
rfkill: input handler disabled
xe 0000:00:02.0: [drm] GT0: Engine reset: engine_class=bcs, logical_mask: 0x2, guc_id=0
xe 0000:00:02.0: [drm] GT0: Timedout job: seqno=24496, lrc_seqno=24496, guc_id=0, flags=0x13 in no process [-1]
xe 0000:00:02.0: [drm] GT0: Kernel-submitted job timed out
The likely cause appears to be a race between suspend cancelling the
worker that processes the free_job()'s, such that we still have pending
jobs to be freed after the cancel. Following from this, on resume the
pending_list will now contain at least one already complete job, but it
looks like we call drm_sched_resubmit_jobs(), which will then call
run_job() on everything still on the pending_list. But if the job was
already complete, then all the resources tied to the job, like the bb
itself, any memory that is being accessed, the iommu mappings etc. might
be long gone since those are usually tied to the fence signalling.
This scenario can be seen in ftrace when running a slightly modified
xe_pm IGT (kernel was only modified to inject artificial latency into
free_job to make the race easier to hit):
xe_sched_job_run: dev=0000:00:02.0, fence=0xffff888276cc8540, seqno=0, lrc_seqno=0, gt=0, guc_id=0, batch_addr=0x000000146910 ...
xe_exec_queue_stop: dev=0000:00:02.0, 3:0x2, gt=0, width=1, guc_id=0, guc_state=0x0, flags=0x13
xe_exec_queue_stop: dev=0000:00:02.0, 3:0x2, gt=0, width=1, guc_id=1, guc_state=0x0, flags=0x4
xe_exec_queue_stop: dev=0000:00:02.0, 4:0x1, gt=1, width=1, guc_id=0, guc_state=0x0, flags=0x3
xe_exec_queue_stop: dev=0000:00:02.0, 1:0x1, gt=1, width=1, guc_id=1, guc_state=0x0, flags=0x3
xe_exec_queue_stop: dev=0000:00:02.0, 4:0x1, gt=1, width=1, guc_id=2, guc_state=0x0, flags=0x3
xe_exec_queue_resubmit: dev=0000:00:02.0, 3:0x2, gt=0, width=1, guc_id=0, guc_state=0x0, flags=0x13
xe_sched_job_run: dev=0000:00:02.0, fence=0xffff888276cc8540, seqno=0, lrc_seqno=0, gt=0, guc_id=0, batch_addr=0x000000146910 ...
.....
xe_exec_queue_memory_cat_error: dev=0000:00:02.0, 3:0x2, gt=0, width=1, guc_id=0, guc_state=0x3, flags=0x13
So the job_run() is clearly triggered twice for the same job, even
though the first must have already signalled to completion during
suspend. We can also see a CAT error after the re-submit.
To prevent this only resubmit jobs on the pending_list that have not yet
signalled.
v2:
- Make sure to re-arm the fence callbacks with sched_start().
v3 (Matt B):
- Stop using drm_sched_resubmit_jobs(), which appears to be deprecated
and just open-code a simple loop such that we skip calling run_job()
on anything already signalled.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4856
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: William Tseng <william.tseng@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://lore.kernel.org/r/20250528113328.289392-2-matthew.auld@intel.com
(cherry picked from commit 38fafa9f39)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
For preempt_fence mode VM's we're rejecting eviction of
shared bos during VM_BIND. However, since we do this in the
move() callback, we're getting an eviction failure warning from
TTM. The TTM callback intended for these things is
eviction_valuable().
However, the latter doesn't pass in the struct ttm_operation_ctx
needed to determine whether the caller needs this.
Instead, attach the needed information to the vm under the
vm->resv, until we've been able to update TTM to provide the
needed information. And add sufficient lockdep checks to prevent
misuse and races.
v2:
- Fix a copy-paste error in xe_vm_clear_validating()
v3:
- Fix kerneldoc errors.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: 0af944f0e3 ("drm/xe: Reject BO eviction if BO is bound to current VM")
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250528164105.234718-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 9d5558649f)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The XE driver can be built with or without VSEC support, but fails to link as
built-in if vsec is in a loadable module:
x86_64-linux-ld: vmlinux.o: in function `xe_vsec_init':
(.text+0x1e83e16): undefined reference to `intel_vsec_register'
The normal fix for this is to add a 'depends on INTEL_VSEC || !INTEL_VSEC',
forcing XE to be a loadable module as well, but that causes a circular
dependency:
symbol DRM_XE depends on INTEL_VSEC
symbol INTEL_VSEC depends on X86_PLATFORM_DEVICES
symbol X86_PLATFORM_DEVICES is selected by DRM_XE
The problem here is selecting a symbol from another subsystem, so change
that as well and rephrase the 'select' into the corresponding dependency.
Since X86_PLATFORM_DEVICES is 'default y', there is no change to
defconfig builds here.
Fixes: 0c45e76fcc ("drm/xe/vsec: Support BMG devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250529172355.2395634-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit e4931f8be3)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Add support to manage power limits using pcode mailbox commands
for supported platforms.
v2:
- Address review comments. (Badal)
- Use mailbox commands instead of registers to manage power limits
for BMG.
- Clamp the maximum power limit to GPU firmware default value.
v3:
- Clamp power limit in write also for platforms with mailbox support.
v4:
- Remove unnecessary debug prints. (Badal)
v5:
- Update description of variable pl1_on_boot to fix kernel-doc error.
v6:
- Improve commit message, refer to BIOS as GPU firmware.
- Change macro READ_PL_FROM_BIOS to READ_PL_FROM_FW.
- Rectify drm_warn to drm_info.
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Fixes: e90f7a58e6 ("drm/xe/hwmon: Add HWMON support for BMG")
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://lore.kernel.org/r/20250529163458.2354509-2-karthik.poosa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 7596d839f6)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Pull RTC updates from Alexandre Belloni:
"There are two new drivers this cycle. There is also support for a
negative offset for RTCs that have been shipped with a date set using
an epoch that is before 1970. This unfortunately happens with some
products that ship with a vendor kernel and an out of tree driver.
Core:
- support negative offsets for RTCs that have shipped with an epoch
earlier than 1970
New drivers:
- NXP S32G2/S32G3
- Sophgo CV1800
Drivers:
- loongson: fix missing alarm notifications for ACPI
- m41t80: kickstart ocillator upon failure
- mt6359: mt6357 support
- pcf8563: fix wrong alarm register
- sh: cleanups"
* tag 'rtc-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (39 commits)
rtc: mt6359: Add mt6357 support
rtc: test: Test date conversion for dates starting in 1900
rtc: test: Also test time and wday outcome of rtc_time64_to_tm()
rtc: test: Emit the seconds-since-1970 value instead of days-since-1970
rtc: Fix offset calculation for .start_secs < 0
rtc: Make rtc_time64_to_tm() support dates before 1970
rtc: pcf8563: fix wrong alarm register
rtc: rzn1: support input frequencies other than 32768Hz
rtc: rzn1: Disable controller before initialization
dt-bindings: rtc: rzn1: add optional second clock
rtc: m41t80: reduce verbosity
rtc: m41t80: kickstart ocillator upon failure
rtc: s32g: add NXP S32G2/S32G3 SoC support
dt-bindings: rtc: add schema for NXP S32G2/S32G3 SoCs
dt-bindings: at91rm9260-rtt: add microchip,sama7d65-rtt
dt-bindings: rtc: at91rm9200: add microchip,sama7d65-rtc
rtc: loongson: Add missing alarm notifications for ACPI RTC events
rtc: sophgo: add rtc support for Sophgo CV1800 SoC
rtc: stm32: drop unused module alias
rtc: s3c: drop unused module alias
...
Use the helper screen_info_video_type() to get the framebuffer
type from struct screen_info. Handle supported values in sorted
switch statement.
Reading orig_video_isVGA is unreliable. On most systems it is a
VIDEO_TYPE_ constant. On some systems with VGA it is simply set
to 1 to signal the presence of a VGA output. See vga_probe() for
an example. Retrieving the screen_info type with the helper
screen_info_video_type() detects these cases and returns the
appropriate VIDEO_TYPE_ constant. For VGA, sysfb creates a device
named "vga-framebuffer".
The sysfb code has been taken from vga16fb, where it likely didn't
work correctly either. With this bugfix applied, vga16fb loads for
compatible vga-framebuffer devices.
Fixes: 0db5b61e0d ("fbdev/vga16fb: Create EGA/VGA devices in sysfb code")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: "Uwe Kleine-König" <u.kleine-koenig@baylibre.com>
Cc: Zsolt Kajtar <soci@c64.rulez.org>
Cc: <stable@vger.kernel.org> # v6.1+
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250603154838.401882-1-tzimmermann@suse.de
Apply PCI host-bridge window offsets to screen_info framebuffers. Fixes
invalid access to I/O memory.
Resources behind a PCI host bridge can be relocated by a certain offset
in the kernel's CPU address range used for I/O. The framebuffer memory
range stored in screen_info refers to the CPU addresses as seen during
boot (where the offset is 0). During boot up, firmware may assign a
different memory offset to the PCI host bridge and thereby relocating
the framebuffer address of the PCI graphics device as seen by the kernel.
The information in screen_info must be updated as well.
The helper pcibios_bus_to_resource() performs the relocation of the
screen_info's framebuffer resource (given in PCI bus addresses). The
result matches the I/O-memory resource of the PCI graphics device (given
in CPU addresses). As before, we store away the information necessary to
later update the information in screen_info itself.
Commit 78aa89d1df ("firmware/sysfb: Update screen_info for relocated
EFI framebuffers") added the code for updating screen_info. It is based
on similar functionality that pre-existed in efifb. Efifb uses a pointer
to the PCI resource, while the newer code does a memcpy of the region.
Hence efifb sees any updates to the PCI resource and avoids the issue.
v3:
- Only use struct pci_bus_region for PCI bus addresses (Bjorn)
- Clarify address semantics in commit messages and comments (Bjorn)
v2:
- Fixed tags (Takashi, Ivan)
- Updated information on efifb
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reported-by: "Ivan T. Ivanov" <iivanov@suse.de>
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1240696
Tested-by: "Ivan T. Ivanov" <iivanov@suse.de>
Fixes: 78aa89d1df ("firmware/sysfb: Update screen_info for relocated EFI framebuffers")
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.9+
Link: https://lore.kernel.org/r/20250528080234.7380-1-tzimmermann@suse.de
Pull dmaengine updates from Vinod Koul:
"A fairly small update for the dmaengine subsystem. This has a new ARM
dmaengine driver and couple of new device support and few driver
changes:
New support:
- Renesas RZ/V2H(P) dma support for r9a09g057
- Arm DMA-350 driver
- Tegra Tegra264 ADMA support
Updates:
- AMD ptdma driver code removal and optimizations
- Freescale edma error interrupt handler support"
* tag 'dmaengine-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (27 commits)
dmaengine: idxd: Remove unused pointer and macro
arm64: dts: renesas: r9a09g057: Add DMAC nodes
dmaengine: sh: rz-dmac: Add RZ/V2H(P) support
dmaengine: sh: rz-dmac: Allow for multiple DMACs
irqchip/renesas-rzv2h: Add rzv2h_icu_register_dma_req()
dt-bindings: dma: rz-dmac: Document RZ/V2H(P) family of SoCs
dt-bindings: dma: rz-dmac: Restrict properties for RZ/A1H
dmaengine: idxd: Narrow the restriction on BATCH to ver. 1 only
dmaengine: ti: Add NULL check in udma_probe()
fsldma: Set correct dma_mask based on hw capability
dmaengine: idxd: Check availability of workqueue allocated by idxd wq driver before using
dmaengine: xilinx_dma: Set dma_device directions
dmaengine: tegra210-adma: Add Tegra264 support
dt-bindings: Document Tegra264 ADMA support
dmaengine: dw-edma: Add HDMA NATIVE map check
dmaegnine: fsl-edma: add edma error interrupt handler
dt-bindings: dma: fsl-edma: increase maxItems of interrupts and interrupt-names
dmaengine: ARM_DMA350 should depend on ARM/ARM64
dt-bindings: dma: qcom,bam: Document dma-coherent property
dmaengine: Add Arm DMA-350 driver
...
