Pull sound updates from Takashi Iwai:
"We've received a lot of activities in this cycle, mostly about leaf
driver codes rather than the core part, but with a good mixture of
code cleanups and new driver additions. Below are some highlights:
ASoC:
- Support for automatically enumerating DAIs from standards
conforming SoundWire SDCA devices; not much used as of this
writing, rather for future implementations
- Conversion of quite a few drivers to newer GPIO APIs
- Continued cleanups and helper usages in allover places
- Support for a wider range of Intel AVS platforms
- Support for AMD ACP 7.x platforms, Cirrus Logic CS35L63 and CS48L32
Everest Semiconductor ES8375 and ES8389, Longsoon-1 AC'97
controllers, nVidia Tegra264, Richtek ALC203 and RT9123 and
Rockchip SAI controllers
HD-audio:
- Lots of cleanups of TAS2781 codec drivers
- A new HD-audio control bound via ACPI for Nvidia
- Support for Tegra264, Intel WCL, usual new codec quirks
USB-audio:
- Fix a race at removal of MIDI device
- Pioneer DJM-V10 support, Scarlett2 driver cleanups
Misc:
- Cleanups of deprecated PCI functions
- Removal of unused / dead function codes"
* tag 'sound-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (364 commits)
firmware: cs_dsp: Fix OOB memory read access in KUnit test
ASoC: codecs: add support for ES8375
ASoC: dt-bindings: Add Everest ES8375 audio CODEC
ALSA: hda: acpi: Make driver's match data const static
ALSA: hda: acpi: Use SYSTEM_SLEEP_PM_OPS()
ALSA: atmel: Replace deprecated strcpy() with strscpy()
ALSA: core: fix up bus match const issues.
ASoC: wm_adsp: Make cirrus_dir const
ASoC: tegra: Tegra264 support in isomgr_bw
ASoC: tegra: AHUB: Add Tegra264 support
ASoC: tegra: ADX: Add Tegra264 support
ASoC: tegra: AMX: Add Tegra264 support
ASoC: tegra: I2S: Add Tegra264 support
ASoC: tegra: Update PLL rate for Tegra264
ASoC: tegra: ASRC: Update ARAM address
ASoC: tegra: ADMAIF: Add Tegra264 support
ASoC: tegra: CIF: Add Tegra264 support
dt-bindings: ASoC: Document Tegra264 APE support
dt-bindings: ASoC: admaif: Add missing properties
ASoC: dt-bindings: audio-graph-card2: reference audio-graph routing property
...
Stress testing resume from suspend on Valve Steam Deck OLED (Galileo)
revealed that the DSP firmware could enter an unrecoverable faulty
state, where the kernel ring buffer is flooded with IPC related error
messages:
[ +0.017002] snd_sof_amd_vangogh 0000:04:00.5: acp_sof_ipc_send_msg: Failed to acquire HW lock
[ +0.000054] snd_sof_amd_vangogh 0000:04:00.5: ipc3_tx_msg_unlocked: ipc message send for 0x30100000 failed: -22
[ +0.000005] snd_sof_amd_vangogh 0000:04:00.5: Failed to setup widget PIPELINE.6.ACPHS1.IN
[ +0.000004] snd_sof_amd_vangogh 0000:04:00.5: Failed to restore pipeline after resume -22
[ +0.000003] snd_sof_amd_vangogh 0000:04:00.5: PM: dpm_run_callback(): pci_pm_resume returns -22
[ +0.000009] snd_sof_amd_vangogh 0000:04:00.5: PM: failed to resume async: error -22
[...]
[ +0.002582] PM: suspend exit
[ +0.065085] snd_sof_amd_vangogh 0000:04:00.5: ipc tx error for 0x30130000 (msg/reply size: 12/0): -22
[ +0.000499] snd_sof_amd_vangogh 0000:04:00.5: error: failed widget list set up for pcm 1 dir 0
[ +0.000011] snd_sof_amd_vangogh 0000:04:00.5: error: set pcm hw_params after resume
[ +0.000006] snd_sof_amd_vangogh 0000:04:00.5: ASoC: error at snd_soc_pcm_component_prepare on 0000:04:00.5: -22
[...]
A system reboot would be necessary to restore the speakers
functionality.
However, by delaying a bit any host to DSP transmission right after
the firmware boot completed, the issue could not be reproduced anymore
and sound continued to work flawlessly even after performing thousands
of suspend/resume cycles.
Introduce the post_fw_run_delay ACP quirk to allow providing the
aforementioned delay via the snd_sof_dsp_ops->post_fw_run() callback for
the affected devices.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20250207-sof-vangogh-fixes-v1-1-67824c1e4c9a@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull soundwire updates from Vinod Koul:
- structure optimization of few bus structures and header updates
- support for 2.0 disco spec
- amd driver updates for acp revision, refactoring code and support for
acp6.3
- soft reset support for cadence driver
* tag 'soundwire-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (24 commits)
soundwire: Minor formatting fixups in sdw.h header
soundwire: Update the includes on the sdw.h header
soundwire: cadence: clear MCP BLOCK_WAKEUP in init
soundwire: cadence: add soft-reset on startup
soundwire: intel_auxdevice: add kernel parameter for mclk divider
soundwire: mipi-disco: add support for DP0/DPn 'lane-list' property
soundwire: mipi-disco: add new properties from 2.0 spec
soundwire: mipi-disco: add comment on DP0-supported property
soundwire: mipi-disco: add support for peripheral channelprepare timeout
soundwire: mipi_disco: add support for clock-scales property
soundwire: mipi-disco: add error handling for property array read
soundwire: mipi-disco: remove DPn audio-modes
soundwire: optimize sdw_dpn_prop
soundwire: optimize sdw_dp0_prop
soundwire: optimize sdw_slave_prop
soundwire: optimize sdw_bus structure
soundwire: optimize sdw_master_prop
soundwire: optimize sdw_stream_runtime memory layout
soundwire: mipi_disco: add MIPI-specific property_read_bool() helpers
soundwire: Correct some typos in comments
...
When ACP is not powered on by default, acp power on sequence explicitly
invoked by programming pgfsm control mask. The existing implementation
checks the same PGFSM status mask and programs the same PGFSM control mask
in all ACP variants which breaks acp power on sequence for ACP6.0 and
ACP6.3 variants. So to fix this issue, update ACP pgfsm control mask and
status mask based on acp descriptor rev field, which will vary based on
acp variant.
Fixes: 846aef1d7c ("ASoC: SOF: amd: Add Renoir ACP HW support")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20240816070328.610360-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Addition of 'dsp_intr_base' to ACP error register offsets points to
wrong register offsets in irq handler. Correct the acp error register
offsets. ACP error status register offset and acp error reason register
offset got changed from ACP6.0 onwards. Add 'acp_error_stat' and
'acp_sw0_i2s_err_reason' as descriptor fields in sof_amd_acp_desc
structure and update the values based on the ACP variant.
>From Rembrandt platform onwards, errors related to SW1 Soundwire manager
instance/I2S controller connected on P1 power tile is reported with
ACP_SW1_I2S_ERROR_REASON register. Add conditional check for the same.
Fixes: 96eb818510 ("ASoC: SOF: amd: add interrupt handling for SoundWire manager devices")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20240813105944.3126903-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code modifies IRAM and DRAM size after sha dma start for
vangogh platform. The problem with this sequence is that it might cause
sha dma failure when firmware code binary size is greater than the default
IRAM size. To fix this issue, Move the iram-dram fence register sequence
prior to sha dma start.
Fixes: 094d11768f ("ASoC: SOF: amd: Skip IRAM/DRAM size modification for Steam Deck OLED")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20240813105944.3126903-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: Updates for v6.10
This is a very big update, in large part due to extensive work the Intel
people have been doing in their drivers though it's also been busy
elsewhere. There's also a big overhaul of the DAPM documentation from
Luca Ceresoli arising from the work he did putting together his recent
ELC talk, and he also contributed a new tool for visualising the DAPM
state.
- A new tool dapm-graph for visualising the DAPM state.
- Substantial fixes and clarifications for the DAPM documentation.
- Very large updates throughout the Intel audio drivers.
- Cleanups of accessors for driver data, module labelling, and for
constification.
- Modernsation and cleanup work in the Mediatek drivers.
- Several fixes and features for the DaVinci I2S driver.
- New drivers for several AMD and Intel platforms, Nuvoton NAU8325,
Rockchip RK3308 and Texas Instruments PCM6240.
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-25-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
