* kvm-arm64/nv-nv:
: .
: Flick the switch on the NV support by adding the missing piece
: in the form of the VNCR page management. From the cover letter:
:
: "This is probably the most interesting bit of the whole NV adventure.
: So far, everything else has been a walk in the park, but this one is
: where the real fun takes place.
:
: With FEAT_NV2, most of the NV support revolves around tricking a guest
: into accessing memory while it tries to access system registers. The
: hypervisor's job is to handle the context switch of the actual
: registers with the state in memory as needed."
: .
KVM: arm64: nv: Release faulted-in VNCR page from mmu_lock critical section
KVM: arm64: nv: Handle TLBI S1E2 for VNCR invalidation with mmu_lock held
KVM: arm64: nv: Hold mmu_lock when invalidating VNCR SW-TLB before translating
KVM: arm64: Document NV caps and vcpu flags
KVM: arm64: Allow userspace to request KVM_ARM_VCPU_EL2*
KVM: arm64: nv: Remove dead code from ERET handling
KVM: arm64: nv: Plumb TLBI S1E2 into system instruction dispatch
KVM: arm64: nv: Add S1 TLB invalidation primitive for VNCR_EL2
KVM: arm64: nv: Program host's VNCR_EL2 to the fixmap address
KVM: arm64: nv: Handle VNCR_EL2 invalidation from MMU notifiers
KVM: arm64: nv: Handle mapping of VNCR_EL2 at EL2
KVM: arm64: nv: Handle VNCR_EL2-triggered faults
KVM: arm64: nv: Add userspace and guest handling of VNCR_EL2
KVM: arm64: nv: Add pseudo-TLB backing VNCR_EL2
KVM: arm64: nv: Don't adjust PSTATE.M when L2 is nesting
KVM: arm64: nv: Move TLBI range decoding to a helper
KVM: arm64: nv: Snapshot S1 ASID tagging information during walk
KVM: arm64: nv: Extract translation helper from the AT code
KVM: arm64: nv: Allocate VNCR page when required
arm64: sysreg: Add layout for VNCR_EL2
Signed-off-by: Marc Zyngier <maz@kernel.org>
The architecture introduces a trap for PSB CSYNC that fits in
the same EC as LS64. Let's deal with it in a similar way as
LS64.
It's not that we expect this to be useful any time soon anyway.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Bulk addition of all the system registers trapped by HDFG{R,W}TR2_EL2.
The descriptions are extracted from the BSD-licenced JSON file part
of the 2025-03 drop from ARM.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Bulk addition of all the system registers trapped by HFG{R,W}TR2_EL2.
The descriptions are extracted from the BSD-licenced JSON file part
of the 2025-03 drop from ARM.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Treating HFGRTR_EL2 and HFGWTR_EL2 identically was a mistake.
It makes things hard to reason about, has the potential to
introduce bugs by giving a meaning to bits that are really reserved,
and is in general a bad description of the architecture.
Given that #defines are cheap, let's describe both registers as
intended by the architecture, and repaint all the existing uses.
Yes, this is painful.
The registers themselves are generated from the JSON file in
an automated way.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add HCR_EL2 to the sysreg file, more or less directly generated
from the JSON file.
Since the generated names significantly differ from the existing
naming, express the old names in terms of the new one. One day, we'll
fix this mess, but I'm not in any hurry.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Resync the ID_AA64MMFR4_EL1 with the architectue description.
This results in:
- the new PoPS field
- the new NV2P1 value for the NV_frac field
- the new RMEGDI field
- the new SRMASK field
These fields have been generated from the reference JSON file.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The 2024 extensions are adding yet another variant of LS64
(aptly named FEAT_LS64WB) supporting LS64 accesses to write-back
memory, as well as 32 byte single-copy atomic accesses using pairs
of FP registers.
Add the relevant encoding to ID_AA64ISAR1_EL1.LS64.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
stage-1 page tables) to align with the architecture. This avoids
possibly taking an SEA at EL2 on the page table walk or using an
architecturally UNKNOWN fault IPA
- Use acquire/release semantics in the KVM FF-A proxy to avoid
reading a stale value for the FF-A version
- Fix KVM guest driver to match PV CPUID hypercall ABI
- Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
selftests, which is the only memory type for which atomic
instructions are architecturally guaranteed to work
s390:
- Don't use %pK for debug printing and tracepoints
x86:
- Use a separate subclass when acquiring KVM's per-CPU posted
interrupts wakeup lock in the scheduled out path, i.e. when adding
a vCPU on the list of vCPUs to wake, to workaround a false positive
deadlock. The schedule out code runs with a scheduler lock that the
wakeup handler takes in the opposite order; but it does so with
IRQs disabled and cannot run concurrently with a wakeup
- Explicitly zero-initialize on-stack CPUID unions
- Allow building irqbypass.ko as as module when kvm.ko is a module
- Wrap relatively expensive sanity check with KVM_PROVE_MMU
- Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
selftests:
- Add more scenarios to the MONITOR/MWAIT test
- Add option to rseq test to override /dev/cpu_dma_latency
- Bring list of exit reasons up to date
- Cleanup Makefile to list once tests that are valid on all
architectures
Other:
- Documentation fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
KVM: arm64: Use acquire/release to communicate FF-A version negotiation
KVM: arm64: selftests: Explicitly set the page attrs to Inner-Shareable
KVM: arm64: selftests: Introduce and use hardware-definition macros
KVM: VMX: Use separate subclasses for PI wakeup lock to squash false positive
KVM: VMX: Assert that IRQs are disabled when putting vCPU on PI wakeup list
KVM: x86: Explicitly zero-initialize on-stack CPUID unions
KVM: Allow building irqbypass.ko as as module when kvm.ko is a module
KVM: x86/mmu: Wrap sanity check on number of TDP MMU pages with KVM_PROVE_MMU
KVM: selftests: Add option to rseq test to override /dev/cpu_dma_latency
KVM: x86: Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
Documentation: kvm: remove KVM_CAP_MIPS_TE
Documentation: kvm: organize capabilities in the right section
Documentation: kvm: fix some definition lists
Documentation: kvm: drop "Capability" heading from capabilities
Documentation: kvm: give correct name for KVM_CAP_SPAPR_MULTITCE
Documentation: KVM: KVM_GET_SUPPORTED_CPUID now exposes TSC_DEADLINE
selftests: kvm: list once tests that are valid on all architectures
selftests: kvm: bring list of exit reasons up to date
selftests: kvm: revamp MONITOR/MWAIT tests
KVM: arm64: Don't translate FAR if invalid/unsafe
...
Pull kvm updates from Paolo Bonzini:
"ARM:
- Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
- Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
- Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
- Paravirtual interface for discovering the set of CPU
implementations where a VM may run, addressing a longstanding issue
of guest CPU errata awareness in big-little systems and
cross-implementation VM migration
- Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
- pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
- Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
LoongArch:
- Remove unnecessary header include path
- Assume constant PGD during VM context switch
- Add perf events support for guest VM
RISC-V:
- Disable the kernel perf counter during configure
- KVM selftests improvements for PMU
- Fix warning at the time of KVM module removal
x86:
- Add support for aging of SPTEs without holding mmu_lock.
Not taking mmu_lock allows multiple aging actions to run in
parallel, and more importantly avoids stalling vCPUs. This includes
an implementation of per-rmap-entry locking; aging the gfn is done
with only a per-rmap single-bin spinlock taken, whereas locking an
rmap for write requires taking both the per-rmap spinlock and the
mmu_lock.
Note that this decreases slightly the accuracy of accessed-page
information, because changes to the SPTE outside aging might not
use atomic operations even if they could race against a clear of
the Accessed bit.
This is deliberate because KVM and mm/ tolerate false
positives/negatives for accessed information, and testing has shown
that reducing the latency of aging is far more beneficial to
overall system performance than providing "perfect" young/old
information.
- Defer runtime CPUID updates until KVM emulates a CPUID instruction,
to coalesce updates when multiple pieces of vCPU state are
changing, e.g. as part of a nested transition
- Fix a variety of nested emulation bugs, and add VMX support for
synthesizing nested VM-Exit on interception (instead of injecting
#UD into L2)
- Drop "support" for async page faults for protected guests that do
not set SEND_ALWAYS (i.e. that only want async page faults at CPL3)
- Bring a bit of sanity to x86's VM teardown code, which has
accumulated a lot of cruft over the years. Particularly, destroy
vCPUs before the MMU, despite the latter being a VM-wide operation
- Add common secure TSC infrastructure for use within SNP and in the
future TDX
- Block KVM_CAP_SYNC_REGS if guest state is protected. It does not
make sense to use the capability if the relevant registers are not
available for reading or writing
- Don't take kvm->lock when iterating over vCPUs in the suspend
notifier to fix a largely theoretical deadlock
- Use the vCPU's actual Xen PV clock information when starting the
Xen timer, as the cached state in arch.hv_clock can be stale/bogus
- Fix a bug where KVM could bleed PVCLOCK_GUEST_STOPPED across
different PV clocks; restrict PVCLOCK_GUEST_STOPPED to kvmclock, as
KVM's suspend notifier only accounts for kvmclock, and there's no
evidence that the flag is actually supported by Xen guests
- Clean up the per-vCPU "cache" of its reference pvclock, and instead
only track the vCPU's TSC scaling (multipler+shift) metadata (which
is moderately expensive to compute, and rarely changes for modern
setups)
- Don't write to the Xen hypercall page on MSR writes that are
initiated by the host (userspace or KVM) to fix a class of bugs
where KVM can write to guest memory at unexpected times, e.g.
during vCPU creation if userspace has set the Xen hypercall MSR
index to collide with an MSR that KVM emulates
- Restrict the Xen hypercall MSR index to the unofficial synthetic
range to reduce the set of possible collisions with MSRs that are
emulated by KVM (collisions can still happen as KVM emulates
Hyper-V MSRs, which also reside in the synthetic range)
- Clean up and optimize KVM's handling of Xen MSR writes and
xen_hvm_config
- Update Xen TSC leaves during CPUID emulation instead of modifying
the CPUID entries when updating PV clocks; there is no guarantee PV
clocks will be updated between TSC frequency changes and CPUID
emulation, and guest reads of the TSC leaves should be rare, i.e.
are not a hot path
x86 (Intel):
- Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and
thus modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1
- Pass XFD_ERR as the payload when injecting #NM, as a preparatory
step for upcoming FRED virtualization support
- Decouple the EPT entry RWX protection bit macros from the EPT
Violation bits, both as a general cleanup and in anticipation of
adding support for emulating Mode-Based Execution Control (MBEC)
- Reject KVM_RUN if userspace manages to gain control and stuff
invalid guest state while KVM is in the middle of emulating nested
VM-Enter
- Add a macro to handle KVM's sanity checks on entry/exit VMCS
control pairs in anticipation of adding sanity checks for secondary
exit controls (the primary field is out of bits)
x86 (AMD):
- Ensure the PSP driver is initialized when both the PSP and KVM
modules are built-in (the initcall framework doesn't handle
dependencies)
- Use long-term pins when registering encrypted memory regions, so
that the pages are migrated out of MIGRATE_CMA/ZONE_MOVABLE and
don't lead to excessive fragmentation
- Add macros and helpers for setting GHCB return/error codes
- Add support for Idle HLT interception, which elides interception if
the vCPU has a pending, unmasked virtual IRQ when HLT is executed
- Fix a bug in INVPCID emulation where KVM fails to check for a
non-canonical address
- Don't attempt VMRUN for SEV-ES+ guests if the vCPU's VMSA is
invalid, e.g. because the vCPU was "destroyed" via SNP's AP
Creation hypercall
- Reject SNP AP Creation if the requested SEV features for the vCPU
don't match the VM's configured set of features
Selftests:
- Fix again the Intel PMU counters test; add a data load and do
CLFLUSH{OPT} on the data instead of executing code. The theory is
that modern Intel CPUs have learned new code prefetching tricks
that bypass the PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that an
event is counting correctly without actually knowing what the event
counts on the underlying hardware
- Fix a variety of flaws, bugs, and false failures/passes
dirty_log_test, and improve its coverage by collecting all dirty
entries on each iteration
- Fix a few minor bugs related to handling of stats FDs
- Add infrastructure to make vCPU and VM stats FDs available to tests
by default (open the FDs during VM/vCPU creation)
- Relax an assertion on the number of HLT exits in the xAPIC IPI test
when running on a CPU that supports AMD's Idle HLT (which elides
interception of HLT if a virtual IRQ is pending and unmasked)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (216 commits)
RISC-V: KVM: Optimize comments in kvm_riscv_vcpu_isa_disable_allowed
RISC-V: KVM: Teardown riscv specific bits after kvm_exit
LoongArch: KVM: Register perf callbacks for guest
LoongArch: KVM: Implement arch-specific functions for guest perf
LoongArch: KVM: Add stub for kvm_arch_vcpu_preempted_in_kernel()
LoongArch: KVM: Remove PGD saving during VM context switch
LoongArch: KVM: Remove unnecessary header include path
KVM: arm64: Tear down vGIC on failed vCPU creation
KVM: arm64: PMU: Reload when resetting
KVM: arm64: PMU: Reload when user modifies registers
KVM: arm64: PMU: Fix SET_ONE_REG for vPMC regs
KVM: arm64: PMU: Assume PMU presence in pmu-emul.c
KVM: arm64: PMU: Set raw values from user to PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
KVM: arm64: Create each pKVM hyp vcpu after its corresponding host vcpu
KVM: arm64: Factor out pKVM hyp vcpu creation to separate function
KVM: arm64: Initialize HCRX_EL2 traps in pKVM
KVM: arm64: Factor out setting HCRX_EL2 traps into separate function
KVM: x86: block KVM_CAP_SYNC_REGS if guest state is protected
KVM: x86: Add infrastructure for secure TSC
KVM: x86: Push down setting vcpu.arch.user_set_tsc
...
The ICH_VTR_EL2-related macros are missing a number of config
bits that we are about to handle. Take this opportunity to fully
describe the layout of that register as part of the automatic
generation infrastructure.
This results in a bit of churn to repaint constants that are now
generated with a different format.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250225172930.1850838-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Pull KVM/arm64 updates from Will Deacon:
"New features:
- Support for non-protected guest in protected mode, achieving near
feature parity with the non-protected mode
- Support for the EL2 timers as part of the ongoing NV support
- Allow control of hardware tracing for nVHE/hVHE
Improvements, fixes and cleanups:
- Massive cleanup of the debug infrastructure, making it a bit less
awkward and definitely easier to maintain. This should pave the way
for further optimisations
- Complete rewrite of pKVM's fixed-feature infrastructure, aligning
it with the rest of KVM and making the code easier to follow
- Large simplification of pKVM's memory protection infrastructure
- Better handling of RES0/RES1 fields for memory-backed system
registers
- Add a workaround for Qualcomm's Snapdragon X CPUs, which suffer
from a pretty nasty timer bug
- Small collection of cleanups and low-impact fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (87 commits)
arm64/sysreg: Get rid of TRFCR_ELx SysregFields
KVM: arm64: nv: Fix doc header layout for timers
KVM: arm64: nv: Apply RESx settings to sysreg reset values
KVM: arm64: nv: Always evaluate HCR_EL2 using sanitising accessors
KVM: arm64: Fix selftests after sysreg field name update
coresight: Pass guest TRFCR value to KVM
KVM: arm64: Support trace filtering for guests
KVM: arm64: coresight: Give TRBE enabled state to KVM
coresight: trbe: Remove redundant disable call
arm64/sysreg/tools: Move TRFCR definitions to sysreg
tools: arm64: Update sysreg.h header files
KVM: arm64: Drop pkvm_mem_transition for host/hyp donations
KVM: arm64: Drop pkvm_mem_transition for host/hyp sharing
KVM: arm64: Drop pkvm_mem_transition for FF-A
KVM: arm64: Explicitly handle BRBE traps as UNDEFINED
KVM: arm64: vgic: Use str_enabled_disabled() in vgic_v3_probe()
arm64: kvm: Introduce nvhe stack size constants
KVM: arm64: Fix nVHE stacktrace VA bits mask
KVM: arm64: Fix FEAT_MTE in pKVM
Documentation: Update the behaviour of "kvm-arm.mode"
...
* kvm-arm64/coresight-6.14:
: .
: Trace filtering update from James Clark. From the cover letter:
:
: "The guest filtering rules from the Perf session are now honored for both
: nVHE and VHE modes. This is done by either writing to TRFCR_EL12 at the
: start of the Perf session and doing nothing else further, or caching the
: guest value and writing it at guest switch for nVHE. In pKVM, trace is
: now be disabled for both protected and unprotected guests."
: .
KVM: arm64: Fix selftests after sysreg field name update
coresight: Pass guest TRFCR value to KVM
KVM: arm64: Support trace filtering for guests
KVM: arm64: coresight: Give TRBE enabled state to KVM
coresight: trbe: Remove redundant disable call
arm64/sysreg/tools: Move TRFCR definitions to sysreg
tools: arm64: Update sysreg.h header files
Signed-off-by: Marc Zyngier <maz@kernel.org>
Convert TRFCR to automatic generation. Add separate definitions for ELx
and EL2 as TRFCR_EL1 doesn't have CX. This also mirrors the previous
definition so no code change is required.
Also add TRFCR_EL12 which will start to be used in a later commit.
Unfortunately, to avoid breaking the Perf build with duplicate
definition errors, the tools copy of the sysreg.h header needs to be
updated at the same time rather than the usual second commit. This is
because the generated version of sysreg
(arch/arm64/include/generated/asm/sysreg-defs.h), is currently shared
and tools/ does not have its own copy.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250106142446.628923-4-james.clark@linaro.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
TCR2_EL1x is a pretty bizarre construct, as it is shared between
TCR2_EL1 and TCR2_EL12. But the latter is obviously only an
accessor to the former.
In order to make things more consistent, upgrade TCR2_EL1x to
a full-blown sysreg definition for TCR2_EL1, and describe TCR2_EL12
as a mapping to TCR2_EL1.
This results in a couple of minor changes to the actual code.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241219173351.1123087-3-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
*EL02 and *_EL12 system registers are actually only accessors for
EL0 and EL1 registers accessed from EL2 when HCR_EL2.E2H==1. They
do not have fields of their own.
To that effect, introduce a 'Mapping' entry, describing which
system register an _EL12 register maps to.
Implementation wise, this is handled the same was as Fields,
which ls only a comment.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241219173351.1123087-2-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Pull kvm updates from Paolo Bonzini:
"The biggest change here is eliminating the awful idea that KVM had of
essentially guessing which pfns are refcounted pages.
The reason to do so was that KVM needs to map both non-refcounted
pages (for example BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP
VMAs that contain refcounted pages.
However, the result was security issues in the past, and more recently
the inability to map VM_IO and VM_PFNMAP memory that _is_ backed by
struct page but is not refcounted. In particular this broke virtio-gpu
blob resources (which directly map host graphics buffers into the
guest as "vram" for the virtio-gpu device) with the amdgpu driver,
because amdgpu allocates non-compound higher order pages and the tail
pages could not be mapped into KVM.
This requires adjusting all uses of struct page in the
per-architecture code, to always work on the pfn whenever possible.
The large series that did this, from David Stevens and Sean
Christopherson, also cleaned up substantially the set of functions
that provided arch code with the pfn for a host virtual addresses.
The previous maze of twisty little passages, all different, is
replaced by five functions (__gfn_to_page, __kvm_faultin_pfn, the
non-__ versions of these two, and kvm_prefetch_pages) saving almost
200 lines of code.
ARM:
- Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
- Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This
call was introduced in PSCIv1.3 as a mechanism to request
hibernation, similar to the S4 state in ACPI
- Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
- PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
- Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
- Avoid emulated MMIO completion if userspace has requested
synchronous external abort injection
- Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
LoongArch:
- Add iocsr and mmio bus simulation in kernel.
- Add in-kernel interrupt controller emulation.
- Add support for virtualization extensions to the eiointc irqchip.
PPC:
- Drop lingering and utterly obsolete references to PPC970 KVM, which
was removed 10 years ago.
- Fix incorrect documentation references to non-existing ioctls
RISC-V:
- Accelerate KVM RISC-V when running as a guest
- Perf support to collect KVM guest statistics from host side
s390:
- New selftests: more ucontrol selftests and CPU model sanity checks
- Support for the gen17 CPU model
- List registers supported by KVM_GET/SET_ONE_REG in the
documentation
x86:
- Cleanup KVM's handling of Accessed and Dirty bits to dedup code,
improve documentation, harden against unexpected changes.
Even if the hardware A/D tracking is disabled, it is possible to
use the hardware-defined A/D bits to track if a PFN is Accessed
and/or Dirty, and that removes a lot of special cases.
- Elide TLB flushes when aging secondary PTEs, as has been done in
x86's primary MMU for over 10 years.
- Recover huge pages in-place in the TDP MMU when dirty page logging
is toggled off, instead of zapping them and waiting until the page
is re-accessed to create a huge mapping. This reduces vCPU jitter.
- Batch TLB flushes when dirty page logging is toggled off. This
reduces the time it takes to disable dirty logging by ~3x.
- Remove the shrinker that was (poorly) attempting to reclaim shadow
page tables in low-memory situations.
- Clean up and optimize KVM's handling of writes to
MSR_IA32_APICBASE.
- Advertise CPUIDs for new instructions in Clearwater Forest
- Quirk KVM's misguided behavior of initialized certain feature MSRs
to their maximum supported feature set, which can result in KVM
creating invalid vCPU state. E.g. initializing PERF_CAPABILITIES to
a non-zero value results in the vCPU having invalid state if
userspace hides PDCM from the guest, which in turn can lead to
save/restore failures.
- Fix KVM's handling of non-canonical checks for vCPUs that support
LA57 to better follow the "architecture", in quotes because the
actual behavior is poorly documented. E.g. most MSR writes and
descriptor table loads ignore CR4.LA57 and operate purely on
whether the CPU supports LA57.
- Bypass the register cache when querying CPL from kvm_sched_out(),
as filling the cache from IRQ context is generally unsafe; harden
the cache accessors to try to prevent similar issues from occuring
in the future. The issue that triggered this change was already
fixed in 6.12, but was still kinda latent.
- Advertise AMD_IBPB_RET to userspace, and fix a related bug where
KVM over-advertises SPEC_CTRL when trying to support cross-vendor
VMs.
- Minor cleanups
- Switch hugepage recovery thread to use vhost_task.
These kthreads can consume significant amounts of CPU time on
behalf of a VM or in response to how the VM behaves (for example
how it accesses its memory); therefore KVM tried to place the
thread in the VM's cgroups and charge the CPU time consumed by that
work to the VM's container.
However the kthreads did not process SIGSTOP/SIGCONT, and therefore
cgroups which had KVM instances inside could not complete freezing.
Fix this by replacing the kthread with a PF_USER_WORKER thread, via
the vhost_task abstraction. Another 100+ lines removed, with
generally better behavior too like having these threads properly
parented in the process tree.
- Revert a workaround for an old CPU erratum (Nehalem/Westmere) that
didn't really work; there was really nothing to work around anyway:
the broken patch was meant to fix nested virtualization, but the
PERF_GLOBAL_CTRL MSR is virtualized and therefore unaffected by the
erratum.
- Fix 6.12 regression where CONFIG_KVM will be built as a module even
if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is
'y'.
x86 selftests:
- x86 selftests can now use AVX.
Documentation:
- Use rST internal links
- Reorganize the introduction to the API document
Generic:
- Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock
instead of RCU, so that running a vCPU on a different task doesn't
encounter long due to having to wait for all CPUs become quiescent.
In general both reads and writes are rare, but userspace that
supports confidential computing is introducing the use of "helper"
vCPUs that may jump from one host processor to another. Those will
be very happy to trigger a synchronize_rcu(), and the effect on
performance is quite the disaster"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (298 commits)
KVM: x86: Break CONFIG_KVM_X86's direct dependency on KVM_INTEL || KVM_AMD
KVM: x86: add back X86_LOCAL_APIC dependency
Revert "KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config()"
KVM: x86: switch hugepage recovery thread to vhost_task
KVM: x86: expose MSR_PLATFORM_INFO as a feature MSR
x86: KVM: Advertise CPUIDs for new instructions in Clearwater Forest
Documentation: KVM: fix malformed table
irqchip/loongson-eiointc: Add virt extension support
LoongArch: KVM: Add irqfd support
LoongArch: KVM: Add PCHPIC user mode read and write functions
LoongArch: KVM: Add PCHPIC read and write functions
LoongArch: KVM: Add PCHPIC device support
LoongArch: KVM: Add EIOINTC user mode read and write functions
LoongArch: KVM: Add EIOINTC read and write functions
LoongArch: KVM: Add EIOINTC device support
LoongArch: KVM: Add IPI user mode read and write function
LoongArch: KVM: Add IPI read and write function
LoongArch: KVM: Add IPI device support
LoongArch: KVM: Add iocsr and mmio bus simulation in kernel
KVM: arm64: Pass on SVE mapping failures
...
* arm64/for-next/perf:
perf: Switch back to struct platform_driver::remove()
perf: arm_pmuv3: Add support for Samsung Mongoose PMU
dt-bindings: arm: pmu: Add Samsung Mongoose core compatible
perf/dwc_pcie: Fix typos in event names
perf/dwc_pcie: Add support for Ampere SoCs
ARM: pmuv3: Add missing write_pmuacr()
perf/marvell: Marvell PEM performance monitor support
perf/arm_pmuv3: Add PMUv3.9 per counter EL0 access control
perf/dwc_pcie: Convert the events with mixed case to lowercase
perf/cxlpmu: Support missing events in 3.1 spec
perf: imx_perf: add support for i.MX91 platform
dt-bindings: perf: fsl-imx-ddr: Add i.MX91 compatible
drivers perf: remove unused field pmu_node
* for-next/gcs: (42 commits)
: arm64 Guarded Control Stack user-space support
kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c
arm64/gcs: Fix outdated ptrace documentation
kselftest/arm64: Ensure stable names for GCS stress test results
kselftest/arm64: Validate that GCS push and write permissions work
kselftest/arm64: Enable GCS for the FP stress tests
kselftest/arm64: Add a GCS stress test
kselftest/arm64: Add GCS signal tests
kselftest/arm64: Add test coverage for GCS mode locking
kselftest/arm64: Add a GCS test program built with the system libc
kselftest/arm64: Add very basic GCS test program
kselftest/arm64: Always run signals tests with GCS enabled
kselftest/arm64: Allow signals tests to specify an expected si_code
kselftest/arm64: Add framework support for GCS to signal handling tests
kselftest/arm64: Add GCS as a detected feature in the signal tests
kselftest/arm64: Verify the GCS hwcap
arm64: Add Kconfig for Guarded Control Stack (GCS)
arm64/ptrace: Expose GCS via ptrace and core files
arm64/signal: Expose GCS state in signal frames
arm64/signal: Set up and restore the GCS context for signal handlers
arm64/mm: Implement map_shadow_stack()
...
* for-next/probes:
: Various arm64 uprobes/kprobes cleanups
arm64: insn: Simulate nop instruction for better uprobe performance
arm64: probes: Remove probe_opcode_t
arm64: probes: Cleanup kprobes endianness conversions
arm64: probes: Move kprobes-specific fields
arm64: probes: Fix uprobes for big-endian kernels
arm64: probes: Fix simulate_ldr*_literal()
arm64: probes: Remove broken LDR (literal) uprobe support
* for-next/asm-offsets:
: arm64 asm-offsets.c cleanup (remove unused offsets)
arm64: asm-offsets: remove PREEMPT_DISABLE_OFFSET
arm64: asm-offsets: remove DMA_{TO,FROM}_DEVICE
arm64: asm-offsets: remove VM_EXEC and PAGE_SZ
arm64: asm-offsets: remove MM_CONTEXT_ID
arm64: asm-offsets: remove COMPAT_{RT_,SIGFRAME_REGS_OFFSET
arm64: asm-offsets: remove VMA_VM_*
arm64: asm-offsets: remove TSK_ACTIVE_MM
* for-next/tlb:
: TLB flushing optimisations
arm64: optimize flush tlb kernel range
arm64: tlbflush: add __flush_tlb_range_limit_excess()
* for-next/misc:
: Miscellaneous patches
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
arm64/ptrace: Clarify documentation of VL configuration via ptrace
acpi/arm64: remove unnecessary cast
arm64/mm: Change protval as 'pteval_t' in map_range()
arm64: uprobes: Optimize cache flushes for xol slot
acpi/arm64: Adjust error handling procedure in gtdt_parse_timer_block()
arm64: fix .data.rel.ro size assertion when CONFIG_LTO_CLANG
arm64/ptdump: Test both PTE_TABLE_BIT and PTE_VALID for block mappings
arm64/mm: Sanity check PTE address before runtime P4D/PUD folding
arm64/mm: Drop setting PTE_TYPE_PAGE in pte_mkcont()
ACPI: GTDT: Tighten the check for the array of platform timer structures
arm64/fpsimd: Fix a typo
arm64: Expose ID_AA64ISAR1_EL1.XS to sanitised feature consumers
arm64: Return early when break handler is found on linked-list
arm64/mm: Re-organize arch_make_huge_pte()
arm64/mm: Drop _PROT_SECT_DEFAULT
arm64: Add command-line override for ID_AA64MMFR0_EL1.ECV
arm64: head: Drop SWAPPER_TABLE_SHIFT
arm64: cpufeature: add POE to cpucap_is_possible()
arm64/mm: Change pgattr_change_is_safe() arguments as pteval_t
* for-next/mte:
: Various MTE improvements
selftests: arm64: add hugetlb mte tests
hugetlb: arm64: add mte support
* for-next/sysreg:
: arm64 sysreg updates
arm64/sysreg: Update ID_AA64MMFR1_EL1 to DDI0601 2024-09
* for-next/stacktrace:
: arm64 stacktrace improvements
arm64: preserve pt_regs::stackframe during exec*()
arm64: stacktrace: unwind exception boundaries
arm64: stacktrace: split unwind_consume_stack()
arm64: stacktrace: report recovered PCs
arm64: stacktrace: report source of unwind data
arm64: stacktrace: move dump_backtrace() to kunwind_stack_walk()
arm64: use a common struct frame_record
arm64: pt_regs: swap 'unused' and 'pmr' fields
arm64: pt_regs: rename "pmr_save" -> "pmr"
arm64: pt_regs: remove stale big-endian layout
arm64: pt_regs: assert pt_regs is a multiple of 16 bytes
* for-next/hwcap3:
: Add AT_HWCAP3 support for arm64 (also wire up AT_HWCAP4)
arm64: Support AT_HWCAP3
binfmt_elf: Wire up AT_HWCAP3 at AT_HWCAP4
* for-next/kselftest: (30 commits)
: arm64 kselftest fixes/cleanups
kselftest/arm64: Try harder to generate different keys during PAC tests
kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()
kselftest/arm64: Corrupt P0 in the irritator when testing SSVE
kselftest/arm64: Add FPMR coverage to fp-ptrace
kselftest/arm64: Expand the set of ZA writes fp-ptrace does
kselftets/arm64: Use flag bits for features in fp-ptrace assembler code
kselftest/arm64: Enable build of PAC tests with LLVM=1
kselftest/arm64: Check that SVCR is 0 in signal handlers
kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests
kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test
kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests
kselftest/arm64: Fix build with stricter assemblers
kselftest/arm64: Test signal handler state modification in fp-stress
kselftest/arm64: Provide a SIGUSR1 handler in the kernel mode FP stress test
kselftest/arm64: Implement irritators for ZA and ZT
kselftest/arm64: Remove unused ADRs from irritator handlers
kselftest/arm64: Correct misleading comments on fp-stress irritators
kselftest/arm64: Poll less often while waiting for fp-stress children
kselftest/arm64: Increase frequency of signal delivery in fp-stress
kselftest/arm64: Fix encoding for SVE B16B16 test
...
* for-next/crc32:
: Optimise CRC32 using PMULL instructions
arm64/crc32: Implement 4-way interleave using PMULL
arm64/crc32: Reorganize bit/byte ordering macros
arm64/lib: Handle CRC-32 alternative in C code
* for-next/guest-cca:
: Support for running Linux as a guest in Arm CCA
arm64: Document Arm Confidential Compute
virt: arm-cca-guest: TSM_REPORT support for realms
arm64: Enable memory encrypt for Realms
arm64: mm: Avoid TLBI when marking pages as valid
arm64: Enforce bounce buffers for realm DMA
efi: arm64: Map Device with Prot Shared
arm64: rsi: Map unprotected MMIO as decrypted
arm64: rsi: Add support for checking whether an MMIO is protected
arm64: realm: Query IPA size from the RMM
arm64: Detect if in a realm and set RIPAS RAM
arm64: rsi: Add RSI definitions
* for-next/haft:
: Support for arm64 FEAT_HAFT
arm64: pgtable: Warn unexpected pmdp_test_and_clear_young()
arm64: Enable ARCH_HAS_NONLEAF_PMD_YOUNG
arm64: Add support for FEAT_HAFT
arm64: setup: name 'tcr2' register
arm64/sysreg: Update ID_AA64MMFR1_EL1 register
* for-next/scs:
: Dynamic shadow call stack fixes
arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux()
arm64/scs: Deal with 64-bit relative offsets in FDE frames
arm64/scs: Fix handling of DWARF augmentation data in CIE/FDE frames
* kvm-arm64/nv-pmu:
: Support for vEL2 PMU controls
:
: Align the vEL2 PMU support with the current state of non-nested KVM,
: including:
:
: - Trap routing, with the annoying complication of EL2 traps that apply
: in Host EL0
:
: - PMU emulation, using the correct configuration bits depending on
: whether a counter falls in the hypervisor or guest range of PMCs
:
: - Perf event swizzling across nested boundaries, as the event filtering
: needs to be remapped to cope with vEL2
KVM: arm64: nv: Reprogram PMU events affected by nested transition
KVM: arm64: nv: Apply EL2 event filtering when in hyp context
KVM: arm64: nv: Honor MDCR_EL2.HLP
KVM: arm64: nv: Honor MDCR_EL2.HPME
KVM: arm64: Add helpers to determine if PMC counts at a given EL
KVM: arm64: nv: Adjust range of accessible PMCs according to HPMN
KVM: arm64: Rename kvm_pmu_valid_counter_mask()
KVM: arm64: nv: Advertise support for FEAT_HPMN0
KVM: arm64: nv: Describe trap behaviour of MDCR_EL2.HPMN
KVM: arm64: nv: Honor MDCR_EL2.{TPM, TPMCR} in Host EL0
KVM: arm64: nv: Reinject traps that take effect in Host EL0
KVM: arm64: nv: Rename BEHAVE_FORWARD_ANY
KVM: arm64: nv: Allow coarse-grained trap combos to use complex traps
KVM: arm64: Describe RES0/RES1 bits of MDCR_EL2
arm64: sysreg: Add new definitions for ID_AA64DFR0_EL1
arm64: sysreg: Migrate MDCR_EL2 definition to table
arm64: sysreg: Describe ID_AA64DFR2_EL1 fields
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/mpam-ni:
: Hiding FEAT_MPAM from KVM guests, courtesy of James Morse + Joey Gouly
:
: Fix a longstanding bug where FEAT_MPAM was accidentally exposed to KVM
: guests + the EL2 trap configuration was not explicitly configured. As
: part of this, bring in skeletal support for initialising the MPAM CPU
: context so KVM can actually set traps for its guests.
:
: Be warned -- if this series leads to boot failures on your system,
: you're running on turd firmware.
:
: As an added bonus (that builds upon the infrastructure added by the MPAM
: series), allow userspace to configure CTR_EL0.L1Ip, courtesy of Shameer
: Kolothum.
KVM: arm64: Make L1Ip feature in CTR_EL0 writable from userspace
KVM: arm64: selftests: Test ID_AA64PFR0.MPAM isn't completely ignored
KVM: arm64: Disable MPAM visibility by default and ignore VMM writes
KVM: arm64: Add a macro for creating filtered sys_reg_descs entries
KVM: arm64: Fix missing traps of guest accesses to the MPAM registers
arm64: cpufeature: discover CPU support for MPAM
arm64: head.S: Initialise MPAM EL2 registers and disable traps
arm64/sysreg: Convert existing MPAM sysregs and add the remaining entries
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
