Pull dmaengine updates from Vinod Koul:
"A fairly small update for the dmaengine subsystem. This has a new ARM
dmaengine driver and couple of new device support and few driver
changes:
New support:
- Renesas RZ/V2H(P) dma support for r9a09g057
- Arm DMA-350 driver
- Tegra Tegra264 ADMA support
Updates:
- AMD ptdma driver code removal and optimizations
- Freescale edma error interrupt handler support"
* tag 'dmaengine-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (27 commits)
dmaengine: idxd: Remove unused pointer and macro
arm64: dts: renesas: r9a09g057: Add DMAC nodes
dmaengine: sh: rz-dmac: Add RZ/V2H(P) support
dmaengine: sh: rz-dmac: Allow for multiple DMACs
irqchip/renesas-rzv2h: Add rzv2h_icu_register_dma_req()
dt-bindings: dma: rz-dmac: Document RZ/V2H(P) family of SoCs
dt-bindings: dma: rz-dmac: Restrict properties for RZ/A1H
dmaengine: idxd: Narrow the restriction on BATCH to ver. 1 only
dmaengine: ti: Add NULL check in udma_probe()
fsldma: Set correct dma_mask based on hw capability
dmaengine: idxd: Check availability of workqueue allocated by idxd wq driver before using
dmaengine: xilinx_dma: Set dma_device directions
dmaengine: tegra210-adma: Add Tegra264 support
dt-bindings: Document Tegra264 ADMA support
dmaengine: dw-edma: Add HDMA NATIVE map check
dmaegnine: fsl-edma: add edma error interrupt handler
dt-bindings: dma: fsl-edma: increase maxItems of interrupts and interrupt-names
dmaengine: ARM_DMA350 should depend on ARM/ARM64
dt-bindings: dma: qcom,bam: Document dma-coherent property
dmaengine: Add Arm DMA-350 driver
...
Pull non-MM updates from Andrew Morton:
- "hung_task: extend blocking task stacktrace dump to semaphore" from
Lance Yang enhances the hung task detector.
The detector presently dumps the blocking tasks's stack when it is
blocked on a mutex. Lance's series extends this to semaphores
- "nilfs2: improve sanity checks in dirty state propagation" from
Wentao Liang addresses a couple of minor flaws in nilfs2
- "scripts/gdb: Fixes related to lx_per_cpu()" from Illia Ostapyshyn
fixes a couple of issues in the gdb scripts
- "Support kdump with LUKS encryption by reusing LUKS volume keys" from
Coiby Xu addresses a usability problem with kdump.
When the dump device is LUKS-encrypted, the kdump kernel may not have
the keys to the encrypted filesystem. A full writeup of this is in
the series [0/N] cover letter
- "sysfs: add counters for lockups and stalls" from Max Kellermann adds
/sys/kernel/hardlockup_count and /sys/kernel/hardlockup_count and
/sys/kernel/rcu_stall_count
- "fork: Page operation cleanups in the fork code" from Pasha Tatashin
implements a number of code cleanups in fork.c
- "scripts/gdb/symbols: determine KASLR offset on s390 during early
boot" from Ilya Leoshkevich fixes some s390 issues in the gdb
scripts
* tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (67 commits)
llist: make llist_add_batch() a static inline
delayacct: remove redundant code and adjust indentation
squashfs: add optional full compressed block caching
crash_dump, nvme: select CONFIGFS_FS as built-in
scripts/gdb/symbols: determine KASLR offset on s390 during early boot
scripts/gdb/symbols: factor out pagination_off()
scripts/gdb/symbols: factor out get_vmlinux()
kernel/panic.c: format kernel-doc comments
mailmap: update and consolidate Casey Connolly's name and email
nilfs2: remove wbc->for_reclaim handling
fork: define a local GFP_VMAP_STACK
fork: check charging success before zeroing stack
fork: clean-up naming of vm_stack/vm_struct variables in vmap stacks code
fork: clean-up ifdef logic around stack allocation
kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count
kernel/watchdog: add /sys/kernel/{hard,soft}lockup_count
x86/crash: make the page that stores the dm crypt keys inaccessible
x86/crash: pass dm crypt keys to kdump kernel
Revert "x86/mm: Remove unused __set_memory_prot()"
crash_dump: retrieve dm crypt keys in kdump kernel
...
Pull SoC devicetree updates from Arnd Bergmann:
"There are 11 newly supported SoCs, but these are all either new
variants of existing designs, or straight reuses of the existing chip
in a new package:
- RK3562 is a new chip based on the old Cortex-A53 core, apparently a
low-cost version of the Cortex-A55 based RK3568/RK3566.
- NXP i.MX94 is a minor variation of i.MX93/i.MX95 with a different
set of on-chip peripherals.
- Renesas RZ/V2N (R9A09G056) is a new member of the larger RZ/V2
family
- Amlogic S6/S7/S7D
- Samsung Exynos7870 is an older chip similar to Exynos7885
- WonderMedia wm8950 is a minor variation on the wm8850 chip
- Amlogic s805y is almost idential to s805x
- Allwinner A523 is similar to A527 and T527
- Qualcomm MSM8926 is a variant of MSM8226
- Qualcomm Snapdragon X1P42100 is related to R1E80100
There are also 65 boards, including reference designs for the chips
above, this includes
- 12 new boards based on TI K3 series chips, most of them from
Toradex
- 10 devices using Rockchips RK35xx and PX30 chips
- 2 phones and 2 laptops based on Qualcomm Snapdragon designs
- 10 NXP i.MX8/i.MX9 boards, mostly for embedded/industrial uses
- 3 Samsung Galaxy phones based on Exynos7870
- 5 Allwinner based boards using a variety of ARMv8 chips
- 9 32-bit machines, each based on a different SoC family
Aside from the new hardware, there is the usual set of cleanups and
newly added hardware support on existing machines, for a total of 965
devicetree changesets"
* tag 'soc-dt-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (956 commits)
MAINTAINERS, mailmap: update Sven Peter's email address
arm64: dts: renesas: rzg3e-smarc-som: Reduce I2C2 clock frequency
arm64: dts: nuvoton: Add pinctrl
ARM: dts: samsung: sp5v210-aries: Align wifi node name with bindings
arm64: dts: blaize-blzp1600: Enable GPIO support
dt-bindings: clock: socfpga: convert to yaml
arm64: dts: rockchip: move rk3562 pinctrl node outside the soc node
arm64: dts: rockchip: fix rk3562 pcie unit addresses
arm64: dts: rockchip: move rk3528 pinctrl node outside the soc node
arm64: dts: rockchip: remove a double-empty line from rk3576 core dtsi
arm64: dts: rockchip: move rk3576 pinctrl node outside the soc node
arm64: dts: rockchip: fix rk3576 pcie unit addresses
arm64: dts: rockchip: Drop assigned-clock* from cpu nodes on rk3588
arm64: dts: rockchip: Add missing SFC power-domains to rk3576
Revert "arm64: dts: mediatek: mt8390-genio-common: Add firmware-name for scp0"
arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes
arm64: dts: mt6359: Rename RTC node to match binding expectations
arm64: dts: mt8365-evk: Add goodix touchscreen support
arm64: dts: mediatek: mt8188: Add missing #reset-cells property
arm64: dts: airoha: en7581: Add PCIe nodes to EN7581 SoC evaluation board
...
Pull drm updates from Dave Airlie:
"As part of building up nova-core/nova-drm pieces we've brought in some
rust abstractions through this tree, aux bus being the main one, with
devres changes also in the driver-core tree. Along with the drm core
abstractions and enough nova-core/nova-drm to use them. This is still
all stub work under construction, to build the nova driver upstream.
The other big NVIDIA related one is nouveau adds support for
Hopper/Blackwell GPUs, this required a new GSP firmware update to
570.144, and a bunch of rework in order to support multiple fw
interfaces.
There is also the introduction of an asahi uapi header file as a
precursor to getting the real driver in later, but to unblock
userspace mesa packages while the driver is trapped behind rust
enablement.
Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe,
and msm being the main ones, and some changes to vsprintf.
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
* tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits)
drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr()
drm/xe: Default auto_link_downgrade status to false
drm/xe/guc: Make creation of SLPC debugfs files conditional
drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue()
drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read
drm/i915/ptl: Use everywhere the correct DDI port clock select mask
drm/nouveau/kms: add support for GB20x
drm/dp: add option to disable zero sized address only transactions.
drm/nouveau: add support for GB20x
drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle
drm/nouveau: add support for GB10x
drm/nouveau/gf100-: track chan progress with non-WFI semaphore release
drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA
drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos
drm/nouveau: add support for GH100
drm/nouveau: improve handling of 64-bit BARs
drm/nouveau/gv100-: switch to volta semaphore methods
drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES
drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY
drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM
...
Armv8 Juno/FVP updates for v6.16
Few updates to the Arm FVP(Fixed Virtual Platform) device tree, enhancing
support for system tracing, power management, and firmware coexistence:
1. ETE and TRBE support
Adds CoreSight ETE and TRBE nodes for the FVP Rev C model. These are
disabled by default as they need to be enabled explicitly via model
parameters.
2. CPU idle states and system timer for idle broadcast
Introduces CPU idle state definitions but disabled by default due to
potential performance impact on the model. Also adds a system-level
broadcast timer for use when CPUs enter deep idle states where local
timers stop.
3. Firmware memory reservation
Reserves 64MB at the end of the first DRAM bank to prevent conflicts
with FF-A firmware or similar configurations that rely on this region.
4. Drop the unnecessary clock-frequency property in the timer nodes
The boot/secure firmware must configure the timer clock frequency and
the non-secure OS must be able to read the same. The clock-frequency is
generally used when the firmware is broken which is not the case on
most of the fast models and Juno platform.
As noted above some of the changes are disabled by default where applicable
to ensure backward compatibility and avoid unintended performance impact
on platforms using default model parameters.
* tag 'juno-updates-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: fvp: Add ETE and TRBE nodes for Rev C model
arm64: dts: arm: Drop the clock-frequency property from timer nodes
arm64: dts: fvp: Reserve 64MB for the FF-A firmware in memory map
arm64: dts: fvp: Add CPU idle states for Rev C model
arm64: dts: fvp: Add system timer for broadcast during CPU idle
Link: https://lore.kernel.org/r/20250513143827.3606686-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
More Qualcomm Arm64 DeviceTree updates for v6.16
Support for CPU frequency scaling is enabled on the X Elite platform.
Also on X Elite, support for the HP EliteBook Ultra G1q is introduced.
Support for the QCS6490 RB3gen2 Industrial Mezzanine is also added.
PCIe controllers and PHYs are described and enabled across IPQ5018,
IPQ5332, and IPQ5424. On IPQ9474 the missing MHI register range is
added. The TCSR block is described and used to enable download mode
flags on IPQ5018.
The venus video encoder/decoder is enabled on the MSM8998-based Lenovo
Miix 630 laptop.
The crypto engine is enabled on QCM2290 and QCS615. Bluetooth is enabled
on the QCM2210-based RB1 board.
The Fairphone FP5 gains Displayport sound support.
SAR2130P display nodes are added.
On 8cx Gen3 the sensor remoteproc (SLPI) is introduced and this is
enabled on Lenovo Thinkpad X13s and the CRD.
The SDM845-based Samsung Galaxy S9 gains graphics, modem and initial
sound support.
On SDX75 the QPIC BAM and NAND support is added, and these are enabled
on the IDP board.
LLCC is added for SM8750. SM8550 gains Iris video decoder support.
For X Elite, Lenovo ThinkPad T14s support for the SDX62 modem, as well
as audio headset, is added. ASUS Vivobook S 15 gains Bluetooth support,
Microsoft Surface Laptop 7 models gets support for DP over USB Type-C,
HP Omnibook X 14 gains audio support. The devkit gets the USB multiport
controller and the two USB Type-A ports described.
Additionally a variety of Devicetree fixes are introduced, primarily
identified through binding validation.
* tag 'qcom-arm64-for-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (58 commits)
arm64: dts: qcom: sm4450: Add RPMh power domains support
arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: add retimers, dp altmode support
arm64: dts: qcom: ipq5424: Enable PCIe PHYs and controllers
arm64: dts: qcom: ipq5424: Add PCIe PHYs and controller nodes
arm64: dts: qcom: sc7280: Mark FastRPC context banks as dma-coherent
arm64: dts: qcom: sdx75-idp: Enable QPIC BAM & QPIC NAND support
arm64: dts: qcom: sdx75: Add QPIC NAND support
arm64: dts: qcom: sdx75: Add QPIC BAM support
arm64: dts: qcom: qcm2290: Add crypto engine
arm64: dts: qcom: x1e80100-vivobook-s15: Add bluetooth
arm64: dts: qcom: x1e80100: Add PCIe lane equalization preset properties
arm64: dts: qcom: qcs615: Fix up UFS clocks
arm64: dts: qcom: sa8775p: Clean up the PSCI PDs
arm64: dts: qcom: msm8996-oneplus: Add SLPI VDD_PX
arm64: dts: qcom: sm6350-pdx213: Wire up USB regulators
arm64: dts: qcom: msm8998-yoshino: Add QUSB2PHY VDD supply
arm64: dts: qcom: msm8998-mtp: Add QUSB2PHY VDD supply
arm64: dts: qcom: msm8998-fxtec: Add QUSB2PHY VDD supply
arm64: dts: qcom: qcs615: Remove disallowed property from AOSS_QMP node
arm64: dts: qcom: msm8998: Remove mdss_hdmi_phy phandle argument
...
Link: https://lore.kernel.org/r/20250520024248.38904-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New SoC the RK3562 (4xA53, Mali-G52) with one evaluation board.
New boards:
- Cobra and PP1516 from Theobroma-Systems (build around the PX30)
- Radxa Rock 5B+ (rk3588)
- Rockchip RK3399 industrial eval board
New peripherals:
- GMAC + SDMMC/SDIO on rk3528
- SAI + HDMI-audio on rk3576
Interesting general updates:
- move rk3528 i2c + uart aliases as requested
- rk3568 PCIe3 MSI to use GIC ITS
- update deprecated dwmac reset properties on some px30 boards
- updates for cypress usb hubs on some Theobroma boards
Binding taken with Greg's blessing
https://lore.kernel.org/all/2025051550-polish-prude-ed56@gregkh/
* tag 'v6.16-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (35 commits)
arm64: dts: rockchip: Improve LED config for NanoPi R5S
arm64: dts: rockchip: add px30-pp1516 base dtsi and board variants
dt-bindings: arm: rockchip: add PX30-PP1516 boards from Theobroma Systems
arm64: dts: rockchip: add px30-cobra base dtsi and board variants
dt-bindings: arm: rockchip: add PX30-Cobra boards from Theobroma Systems
arm64: dts: rockchip: move reset to dedicated eth-phy node on ringneck
arm64: dts: rockchip: add basic mdio node to px30
arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma with Haikou
arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma
arm64: dts: rockchip: fix internal USB hub instability on RK3399 Puma
dt-bindings: usb: cypress,hx3: Add support for all variants
arm64: dts: rockchip: move rk3528 i2c+uart aliases to board files
arm64: dts: rockchip: drop wrong spdif clock from edp1 on rk3588
arm64: dts: rockchip: Add RK3562 evb2 devicetree
arm64: dts: rockchip: add core dtsi for RK3562 SoC
dt-bindings: arm: rockchip: Add rk3562 evb2 board
dt-bindings: soc: rockchip: Add rk3562 syscon compatibles
dt-bindings: rockchip: pmu: Add rk3562 compatible
arm64: dts: rockchip: Enable Ethernet controller on Radxa E20C
arm64: dts: rockchip: Add GMAC nodes for RK3528
...
Link: https://lore.kernel.org/r/3998939.iIbC2pHGDl@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Allwinner device tree changes for 6.16
Introduce Allwinner A523 / A527 / T527 SoC family w/ three new devices:
- Radxa Cubie A5E
- X96Q-Pro+
- Avaota-A1
Also enable EMAC0 ethernet MAC on A523 family for Cubie A5E & Avaota-A1.
Note: the SoC has two different ethernet controllers.
Changes to existing SoCs:
- Enable GPU on H616 with all boards enabled
- Set maximum MMC frequency for the A100
Changes to existing boards:
- Add WiFi/BT header on PINE64 A64 boards
- Add hp-det-gpios for Anbernic RG35XX
- Add support for PHY LEDs on Bananapi (the original one)
Add new devices for existing SoCs:
- YuzukiHD Chameleon based on H6
- Liontron H-A133L based on A133 (compatible with A100)
Tree wide cleanups:
- Use preferred node names for cooling maps
- Align wifi node name with bindings
- Drop spurious 'clock-latency-ns' properties for H5 & H6
* tag 'sunxi-dt-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (27 commits)
arm64: dts: allwinner: a100: add Liontron H-A133L board support
dt-bindings: arm: sunxi: Add Liontron H-A133L board name
dt-bindings: vendor-prefixes: Add Liontron name
ARM: dts: bananapi: add support for PHY LEDs
arm64: dts: allwinner: a100: set maximum MMC frequency
arm64: dts: allwinner: t527: add EMAC0 to Avaota-A1 board
arm64: dts: allwinner: a527: add EMAC0 to Radxa A5E board
arm64: dts: allwinner: a523: Add EMAC0 ethernet MAC
dt-bindings: sram: sunxi-sram: Add A523 compatible
arm64: dts: allwinner: a64: Add WiFi/BT header on SOPINE Baseboard
arm64: dts: allwinner: a64: Add WiFi/BT header on PINE A64
arm64: dts: allwinner: correct the model name for Radxa Cubie A5E
ARM: dts: allwinner: Align wifi node name with bindings
arm64: dts: allwinner: Align wifi node name with bindings
arm64: dts: allwinner: h616: enable Mali GPU for all boards
arm64: dts: allwinner: h616: Add Mali GPU node
arm64: dts: allwinner: h700: Add hp-det-gpios for Anbernic RG35XX
arm64: dts: allwinner: h5/h6: Drop spurious 'clock-latency-ns' properties
arm/arm64: dts: allwinner: Use preferred node names for cooling maps
arm64: dts: allwinner: h616: add YuzukiHD Chameleon support
...
Link: https://lore.kernel.org/r/aCaeZJ2t4S_xhgjp@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
STM32 DT for v6.16, round 1
Highlights:
----------
- MCU:
- Add low power timer on STM32F746
- Add STM32H747 High end MCU support. It embeds:
- dual-core (Cortex-M7 + Cortex-M4)
- up to 2 Mbytes flash
- 1 Mbyte of internal RAM
- Add STM32H747i-disco board support. Detailed information can be
found at:
https://www.st.com/en/evaluation-tools/stm32h747i-disco.html
- MPU:
- STM32MP13:
- Add VREFINT calibration support based on ADC.
- STMP32MP15:
- Add new Ultratronik Fly board support:
- based on STM32MP157C SoC
- 1GB of DDR3
- Several connections are available on this boards:
2*USB2.0, 1*USB2.0 MiniUSB, Debug UART, 1*UART, 1*USART,
SDcard, RJ45, ...
- STM32MP25:
- Add OCTOSPI support on STM32MP25 SoCs
- Add SPI NOR flash support on STM32MP257F-EV1 connected to OSPI1
- Add Low power timer TIMER (LPTIM) on STM32MP25 SoCs and use
LPTIM3 as low power broadcast timer on STM32MP257F-EV1.
* tag 'stm32-dt-for-v6.16-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (22 commits)
ARM: dts: stm32: add initial support for stm32mp157-ultra-fly-sbc board
MAINTAINERS: Add entry for ULTRATRONIK BOARD SUPPORT
dt-bindings: arm: stm32: Document Ultratronik's Fly board DT binding
dt-bindings: vendor-prefixes: Add Ultratronik
arm64: dts: st: use lptimer3 as tick broadcast source on stm32mp257f-ev1
arm64: dts: st: add low-power timer nodes on stm32mp251
arm64: defconfig: enable STM32 LP timer clockevent driver
arm64: dts: st: Add SPI NOR flash support on stm32mp257f-ev1 board
arm64: dts: st: Add ospi port1 pinctrl entries in stm32mp25-pinctrl.dtsi
arm64: dts: st: Add OMM node on stm32mp251
ARM: dts: stm32: support STM32h747i-disco board
ARM: dts: stm32: add an extra pin map for USART1 on stm32h743
ARM: dts: stm32: add pin map for UART8 controller on stm32h743
ARM: dts: stm32: add uart8 node for stm32h743 MCU
dt-bindings: clock: stm32h7: rename USART{7,8}_CK to UART{7,8}_CK
ARM: stm32: add a new SoC - STM32H747
dt-bindings: arm: stm32: add compatible for stm32h747i-disco board
ARM: dts: stm32h7-pinctrl: add _a suffix to u[s]art_pins phandles
ARM: dts: st: stm32: Align wifi node name with bindings
ARM: dts: stm32: add low power timer on STM32F746
...
Link: https://lore.kernel.org/r/2f101efb-6d58-48d8-983a-57e30a34827c@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm Arm64 DeviceTree updates for v6.16
The Snapdragon X Plus platform and related reference device is
introduced. Devicetree for the Xiaomi Redmi Note 8 is added.
Tsens and thermal zones are added for IPQ5332 and IPQ5424. IPQ6018 gains
1.2GHz and 1.5GHz CPU frequencies. The IPQ5424 gains MMC, LEDs and
buttons, while the IPQ9574 gains NSS clock controller and SPI NAND
support.
IPQ6018 SMEM is transitioned to be described directly in the
reserved-memory node.
Display and GPU are enabled in the QCM6490-based Fairphone FP5. On
QCS6490 Rb3Gen2 ADC channels for thermal profiling are added and
Bluetooth is enabled. The USB Type-C orientation GPIO is added on the
QCS6490 Rb3Gen2 and the vision mezzanine is described.
The Fairphone FP5 gains touchscreen and USB Type-C display support, and
the QCM6490 IDP board gains a required listed of protected clocks.
The camera subsystem in SC7280 is described and UFS is transitioned to
use operating points.
On MSM8916, MSM8919 and MSM8939, and devices on these platforms, the
UART pinctrl state is cleaned up.
The MSM8953 platform gains another UART and interconnects.
On SA8775P CTCU and ETR nodes are added, and the CPUfreq throttling
interrupts are added.
Samsung Galaxy S9 SM-G9600 gains a description of the MAX77705 used for
charging, fuel gauge, haptic, and LED, as well as the PMIC used for
display and touchscreen, which then is used to enable the touchscreen.
The LPG/PWM node is added to PM8937 and Xiaomi Redmi 5A gains display
backlight control.
Display and GPU are enabled for the Nothing Phone (1).
QCS615 platform gains command DB definition.
The QCS8300 platform gains description of more QUP instances, CPUfreq,
PCIe SMMU and the SPMI controller.
On SAR2130P PCIe EP device nodes are added.
On SDM630 missing resets are added for SDCC. Then on Fairphone FP3 modem
is enabled, and firmware-path are defined on ADSP and WCNSS.
The SDM845 RB3/DragonBoard845c and the QRB5165 RB5 has the sensors DSP
enabled, and the vision mezzanine on both gets their CMA configuration
cleaned up. Xiaomi Pocophone F1 gains touchscreen support.
On the SM7325 Nothing Phone (1), display, GPU, and camera EEPROMs are
described.
On SM8450 the PCIe endpoint controller is described.
For SM8550 OPP tables are described for PCIe and QUP. SM8750 gains RPMh
sleep stats.
SM8650 gians OSM L3 scaling and variety of OPP tables and missing
interconnect definitions. The thermal trip points for CPU cores and GPU
are raised in reliance on hardware throttling.
SM8650 is also transitioned to per-CPU interrupt partitions, in order to
properly describe the PMU interrupts. Missing Coresight ETE instances
are added.
On SM8750 the cluster idle states are corrected, then audio and compute
DSPs are introduced, together with the crypto and rng blocks. Modem
support is added and enabled on MTP and QRD devices.
On SC8280XP overlays are introduced for those running Linux at EL2 on
these devices. A few more temp-alarm instances are added for the PMICs.
On the X Elite platform GPU cooling and watchdog is introduced, together
with a number of smaller fixes. Dell XPS13 gains support for USB Type-C
display, the QCP gains WiFi/BT power sequence, and a few devices learns
about HBR3. The RTC support is enabled and regulators that are feeding
resources that should be always on is marked as such on a variety of
boards.
The Lenovo Thinkpad T14s DeviceTree is split in two, in order to
describe the LCD and OLED variants.
Missing properties for the crypto BAM is introduced on a variety of
platforms, taking care of a long standing error message in the kernel
log during boot.
DSI phy clock ids are transitioned to use identifiers from the PHY
header file and VBIF region size is corrected, across a large number of
platforms.
A couple of DWC3 quirks are added across a lot of platforms.
The arm32-for-6.15 pull request was accidentally merged into the
arm64-for-6.16 branch and this wasn't discovered until a significant
number of commits would have to be rebased. As such this is kept here as
well.
* tag 'qcom-arm64-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (308 commits)
arm64: dts: qcom: sdm845-xiaomi-beryllium-ebbg: introduce touchscreen support
arm64: dts: qcom: sdm845-xiaomi-beryllium-tianma: introduce touchscreen support
arm64: dts: qcom: sdm845-xiaomi-beryllium-common: add touchscreen related nodes
arm64: dts: qcom: qcs8300: add the pcie smmu node
arm64: dts: qcom: x1e80100-*: Drop useless DP3 compatible override
arm64: dts: qcom: msm8953: Add interconnects
arm64: dts: qcom: msm8953: Add uart_5
arm64: dts: qcom: sm8350: Use q6asm defines for reg
arm64: dts: qcom: sm7325-nothing-spacewar: Use q6asm defines for reg
arm64: dts: qcom: sdm850*: Use q6asm defines for reg
arm64: dts: qcom: sdm845*: Use q6asm defines for reg
arm64: dts: qcom: sc7280: Use q6asm defines for reg
arm64: dts: qcom: sc7180-acer-aspire1: Use q6asm defines for reg
arm64: dts: qcom: qrb5165-rb5: Use q6asm defines for reg
arm64: dts: qcom: msm8996*: Use q6asm defines for reg
arm64: dts: qcom: msm8953: Use q6asm defines for reg
arm64: dts: qcom: msm8916-modem-qdsp6: Use q6asm defines for reg
arm64: dts: qcom: apq8096-db820c: Use q6asm defines for reg
arm64: dts: qcom: qcm6490-fairphone-fp5: Hook up DisplayPort over USB-C
arm64: dts: qcom: qcm6490-fairphone-fp5: Add OCP96011 audio switch
...
Link: https://lore.kernel.org/r/20250511235241.15192-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
TI K3 device tree updates for v6.16
Generic Fixups/Cleanups:
* am62*: emmc - drop disable-wp, Add bootphase tags to support MMC boot
SoC Specific features and Fixes:
AM62Ax:
* C7x and R5F support added
* Bug fix for emmc clock to point to default
* CPUFreq thermal throttling on thermal alert
AM62P5:
* Add RNG Node (common to J722s)
* Bug fix for emmc clock to point to default (common to J722S)
AM625:
* Wakeup R5 node
* Bug fix for emmc clock to point to default
* PRUSS-M support
* New GPU bindings
AM64:
* Switch to 64-bit address space for PCIe0
* Add PCIe control nodes for main_conf region
* Reserve timer nodes used by MCU F/w.
AM65:
* MMC: Add missing delay timing values for SDR and legacy modes
* Add compatible for AM65x syscon and PCIe control properties
(dtbs_check fixes)
J7200:
* PCIe control node to scm_conf, switch to 64-bit address space for PCIe1.
J721E:
* PCIe control node to scm_conf, switch to 64-bit address space for PCIe0,1.
J721S2:
* GPU node for Imagination Tech Rouge BXS GPU.
* PCIe control node to scm_conf, switch to 64-bit address space for PCIe1.
J722s/AM67A:
* Switch serdes status to be enabled by board file than at SoC level.
* Switch to 64-bit address space for PCIe0.
J784S4/J742S2/AM69:
* Add ASPCIE0 and enable output for PCIe1
* Fix length of serdes_ln_ctrl.
* Switch to 64-bit address space for PCIe0,1.
Board Specific:
AM62Ax:
* SK: co-processors C7x, R5, PWM support added
* phycore-som: co-processors C7x, R5
AM62P5:
* Add Toradex Verdin AM62P boards with Dahlia, Ivy, Mallow and Yavia support.
* SK: Add remote processor support, PWM
AM625:
* Add BeagleBoard.org PocketBeagle-2 support
* phycore-som: Enable R5F support
* Verdin: Add eeprom compatible fallback
* SK: Enable PWM, voltage supplies, clock, i2cmux rename for camera overlays
(dtbs_check fixes)
* BeaglePlay: Add voltage supplies for camera overlays (dtbs_check fixes)
* phyboard-lyra: Add cooling maps for fan
* emmc bug fixes: add non-removable flag for eMMC.
AM65:
* EVM: Add missing power supply description ofr Rocktech panel
(dtbs_check fixes)
J721E:
* EVM: Enable OSPI1
* EVM/SK: Dt nodes description for mandatory power suplpies for panel and
sensors (dtbs_check fixes)
J721S2/AM68:
* Add phyBOARD-Izar-AM68x
* am68-SK: Fix regulator hierarchy
J722s/AM67A:
* EVM: Add mux controls for CSI2, power regulator nodes and add overlays for
quad IMX219 and TEVI OV5640.
* BeagleY-AI: Add bootph for main_gpio1
J784S4/J742S2/AM69:
* usxgmii expansion board: Drop un-necessary pinctrl-names
* evm: Add overlay for USB0 Type-A option
* tag 'ti-k3-dt-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (86 commits)
arm64: dts: ti: k3-j722s-evm: Add overlay for TEVI OV5640
arm64: dts: ti: k3-j722s-evm: Add overlay for quad IMX219
arm64: dts: ti: j722s-evm: Add MUX to control CSI2RX
arm64: dts: ti: j722s-evm: Add DT nodes for power regulators
arm64: dts: ti: k3-am62a-phycore-som: Reserve main_timer2 for C7x DSP
arm64: dts: ti: k3-am62a-phycore-som: Reserve main_rti4 for C7x DSP
arm64: dts: ti: k3-am62a-phycore-som: Enable Co-processors
arm64: dts: ti: k3-am62-phycore-som: Enable Co-processors
arm64: dts: ti: k3-am62x-phyboard-lyra-gpio-fan: Update cooling maps
arm64: dts: ti: k3-am62a: Enable CPU freq throttling on thermal alert
arm64: dts: ti: k3-j721e-common-proc-board: Enable OSPI1 on J721E
arm64: dts: ti: k3-j721s2: Add GPU node
arm64: dts: ti: k3-am62: New GPU binding details
arm64: dts: ti: k3-am62-main: Add PRUSS-M node
arm64: dts: ti: k3-am64: Reserve timers used by MCU FW
arm64: dts: ti: k3-am62a7-sk: Reserve main_rti4 for C7x DSP
arm64: dts: ti: k3-am62a7-sk: Reserve main_timer2 for C7x DSP
arm64: dts: ti: k3-am62x-sk-common: Enable IPC with remote processors
arm64: dts: ti: k3-am62p5-sk: Enable IPC with remote processors
arm64: dts: ti: k3-am62a7-sk: Enable IPC with remote processors
...
Link: https://lore.kernel.org/r/20250512144807.yn64klchtmjjl6ac@protrude
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The non-mmio pinctrl node is not supposed to be inside the soc simple-bus
as dtc points out:
../arch/arm64/boot/dts/rockchip/rk3562.dtsi:1115.20-1181.5: Warning (simple_bus_reg): /soc/pinctrl: missing or empty reg/ranges property
Move the pinctrl node outside and adapt the indentation.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250518220449.2722673-7-heiko@sntech.de
The rk3562 pcie node currently uses the apb register as its unit address
which is the second reg area defined in the binding.
As can be seen by the dtc warnings like
../arch/arm64/boot/dts/rockchip/rk3562.dtsi:624.26-675.5: Warning (simple_bus_reg): /soc/pcie@ff500000: simple-bus unit address format error, expected "fe000000"
using the first reg area as the unit address seems to be preferred.
This is the dbi area per the binding, so adapt the unit address accordingly
and move the nodes to their new position.
With the move also move the reg + reg-names below the compatible, as is the
preferred position.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250518220449.2722673-6-heiko@sntech.de
The non-mmio pinctrl node is not supposed to be inside the soc simple-bus
as dtc points out:
../arch/arm64/boot/dts/rockchip/rk3528.dtsi:870.20-936.5: Warning (simple_bus_reg): /soc/pinctrl: missing or empty reg/ranges property
Move the pinctrl node outside and adapt the indentation.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250518220449.2722673-5-heiko@sntech.de
The rk3576 pcie nodes currently use the apb register as their unit address
which is the second reg area defined in the binding.
As can be seen by the dtc warnings like
../arch/arm64/boot/dts/rockchip/rk3576.dtsi:1346.24-1398.5: Warning (simple_bus_reg): /soc/pcie@2a200000: simple-bus unit address format error, expected "22000000"
../arch/arm64/boot/dts/rockchip/rk3576.dtsi:1400.24-1452.5: Warning (simple_bus_reg): /soc/pcie@2a210000: simple-bus unit address format error, expected "22400000"
using the first reg area as the unit address seems to be preferred.
This is the dbi area per the binding, so adapt the unit address accordingly
and move the nodes to their new position.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505150745.PQT9TLYX-lkp@intel.com/
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250518220449.2722673-2-heiko@sntech.de
The assigned-clocks and assigned-clock-rates properties were moved from
the scmi_clk node onto cpu nodes in commit
87810bda8a ("arm64: dts: rockchip: Fix SCMI assigned clocks on rk3588s")
During review of v1 of that patch set, the following comment was made:
why aren't you using OPP tables to define CPU frequencies.
Assigned-clocks looks like a temporary hack because you haven't
done proper OPP tables.
Some time later, proper OPP tables for rk3588 were added in commit
276856db91 ("arm64: dts: rockchip: Add OPP data for CPU cores on RK3588")
So this 'temporary hack' is no longer needed.
Dropping it fixes the following dtb validation issues:
cpu@0: Unevaluated properties are not allowed
('assigned-clock-rates', 'assigned-clocks' were unexpected)
cpu@400: Unevaluated properties are not allowed
('assigned-clock-rates', 'assigned-clocks' were unexpected)
cpu@600: Unevaluated properties are not allowed
('assigned-clock-rates', 'assigned-clocks' were unexpected)
Link: https://lore.kernel.org/linux-rockchip/CAL_JsqL_EogoKOQ1xwU75=rJSC4o7yV3Jej4vadtacX2Pt3-hw@mail.gmail.com/
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250519101909.62754-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
As clearly seen on other non-MediaTek platforms, this is known to
eventually produce regressions in the future, as drivers may break
ABI and stop working with older firmware versions.
Although the firmware-name property was used in multiple MediaTek
devicetrees for the System Companion Processor (SCP) node, avoid
doing the same on MT8390 to lessen eventual ABI breakages that may
happen with a driver update to change the firmware retrieval logic
for the SCP.
This reverts commit 2f0066dae6.
Link: https://lore.kernel.org/r/20250520111002.282841-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
