The thread_global_copy subtest of the live migrate selftest creates a
large number of threads and waits 10ms for them all to start. This is
not enough time to wait for the threaded tasks to start, as some may
need to wait for additional ring space to be granted. Threads that do
so are at risk of getting stopped (signaled) in the middle of waiting
for additional space, which can result in ERESTARTSYS getting reported
erroneously by i915_request_wait.
Instead of waiting a flat 10ms for the threads to start, wait 10ms per
thread. This grants enough of a buffer for each thread to wait for
additional ring space when needed.
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230828192852.2894671-2-jonathan.cavitt@intel.com
References to i915_requests may be trapped by userspace inside a
sync_file or dmabuf (dma-resv) and held indefinitely across different
proceses. To counter-act the memory leaks, we try to not to keep
references from the request past their completion.
On the other side on fence release we need to know if rq->engine
is valid and points to hw engine (true for non-virtual requests).
To make it possible extra bit has been added to rq->execution_mask,
for marking virtual engines.
Fixes: bcb9aa45d5 ("Revert "drm/i915: Hold reference to intel_context over life of i915_request"")
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821153035.3903006-1-andrzej.hajda@intel.com
If GuC hits an internal error (and survives long enough to report it
to the KMD), it is basically toast and will stop until a GT reset and
subsequent GuC reload is performed. Previously, the KMD just printed
an error message and then waited for the heartbeat to eventually kick
in and trigger a reset (assuming the heartbeat had not been disabled).
Instead, force the reset immediately to guarantee that it happens and
to eliminate the very long heartbeat delay. The captured error state
is also more likely to be useful if captured at the time of the error
rather than many seconds later.
Note that it is not possible to trigger a reset from with the G2H
handler itself. The reset prepare process involves flushing
outstanding G2H contents. So a deadlock could result. Instead, the G2H
handler queues a worker thread to do the reset asynchronously.
v2: Flush the worker on suspend and shutdown. Add rate limiting to
prevent spam from a totally dead system (review feedback from Daniele).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230816003957.3572654-1-John.C.Harrison@Intel.com
Many of the IS_METEORLAKE conditions throughout the driver are supposed
to be checks for Xe_LPG and/or Xe_LPM+ IP, not for the MTL platform
specifically. Update those checks to ensure that the code will still
operate properly if/when these IP versions show up on future platforms.
v2:
- Update two more conditions (one for pg_enable, one for MTL HuC
compatibility).
v3:
- Don't change GuC/HuC compatibility check, which sounds like it truly
is specific to the MTL platform. (Gustavo)
- Drop a non-lineage workaround number for the OA timestamp frequency
workaround. (Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-20-matthew.d.roper@intel.com
Now that we properly match the Xe_LPG IP versions associated with
various workarounds, there's no longer any need to define separate MTL
subplatform in the driver. Nothing in the code is conditional on MTL-M
or MTL-P base platforms. Furthermore, I'm not sure the "M" and "P"
designations are even an accurate representation of which specific
platforms would have which IP versions; those were mostly just
placeholders from a long time ago. The reality is that the IP version
present on a platform gets read from a fuse register at driver init; we
shouldn't be trying to guess which IP is present based on PCI ID
anymore.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-18-matthew.d.roper@intel.com
Stepping-specific media behavior shouldn't be tied to MTL as a platform,
but rather specifically to the Xe_LPM+ IP. Future non-MTL platforms may
re-use this IP and will need to follow the exact same logic and apply
the same workarounds. IS_MTL_MEDIA_STEP() is dropped in favor of
IS_MEDIA_GT_IP_STEP, which checks the media IP version associated with a
specific IP and also ensures that we're operating on the media GT, not
the primary GT.
v2:
- Switch to the IS_GT_IP_STEP macro.
v3:
- Switch back to long-form IS_MEDIA_GT_IP_STEP. (Jani)
v4:
- Build IS_MEDIA_GT_IP_STEP on top of IS_MEDIA_GT_IP_RANGE and
IS_MEDIA_STEP building blocks and name the parameters from/until
rather than begin/fixed.. (Jani)
v5:
- Tweak macro comment wording. (Gustavo)
- Add a check to catch NULL gt in IS_MEDIA_GT_IP_RANGE; this allows it
to be used safely on i915->media_gt, which may be NULL on some
platforms. (Gustavo)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-16-matthew.d.roper@intel.com
Several workarounds are guarded by IS_MTL_GRAPHICS_STEP. However none
of these workarounds are actually tied to MTL as a platform; they only
relate to the Xe_LPG graphics IP, regardless of what platform it appears
in. At the moment MTL is the only platform that uses Xe_LPG with IP
versions 12.70 and 12.71, but we can't count on this being true in the
future. Switch these to use a new IS_GFX_GT_IP_STEP() macro instead
that is purely based on IP version. IS_GFX_GT_IP_STEP() is also
GT-based rather than device-based, which will help prevent mistakes
where we accidentally try to apply Xe_LPG graphics workarounds to the
Xe_LPM+ media GT and vice-versa.
v2:
- Switch to a more generic and shorter IS_GT_IP_STEP macro that can be
used for both graphics and media IP (and any other kind of GTs that
show up in the future).
v3:
- Switch back to long-form IS_GFX_GT_IP_STEP macro. (Jani)
- Move macro to intel_gt.h. (Andi)
v4:
- Build IS_GFX_GT_IP_STEP on top of IS_GFX_GT_IP_RANGE and
IS_GRAPHICS_STEP building blocks and name the parameters from/until
rather than begin/fixed. (Jani)
- Fix usage examples in comment.
v5:
- Tweak comment on macro. (Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-15-matthew.d.roper@intel.com
Although some of our Xe_LPG workarounds were already being applied based
on IP version correctly, others were matching on MTL as a base platform,
which is incorrect. Although MTL is the only platform right now that
uses Xe_LPG IP, this may not always be the case. If a future platform
re-uses this graphics IP, the same workarounds should be applied, even
if it isn't a "MTL" platform.
We were also incorrectly applying Xe_LPG workarounds/tuning to the
Xe_LPM+ media IP in one or two places; we should make sure that we don't
try to apply graphics workarounds to the media GT and vice versa where
they don't belong. A new helper macro IS_GT_IP_RANGE() is added to help
ensure this is handled properly -- it checks that the GT matches the IP
type being tested as well as the IP version falling in the proper range.
Note that many of the stepping-based workarounds are still incorrectly
checking for a MTL base platform; that will be remedied in a later
patch.
v2:
- Rework macro into a slightly more generic IS_GT_IP_RANGE() that can
be used for either GFX or MEDIA checks.
v3:
- Switch back to separate macros for gfx and media. (Jani)
- Move macro to intel_gt.h. (Andi)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821180619.650007-14-matthew.d.roper@intel.com
DG2 first production steppings were C0 (for DG2-G10), B1 (for DG2-G11),
and A1 (for DG2-G12). Several workarounds that apply onto to
pre-production hardware can be dropped. Furthermore, several
workarounds that apply to all production steppings can have their
conditions simplified to no longer check the GT stepping.
v2:
- Keep Wa_16011777198 in place for now; it will be removed separately
in a follow-up patch to keep review easier.
Bspec: 44477
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230816214201.534095-10-matthew.d.roper@intel.com
Driver Changes:
- Avoid infinite GPU waits by avoidin premature release of request's
reusable memory (Chris, Janusz)
- Expose RPS thresholds in sysfs (Tvrtko)
- Apply GuC SLPC min frequency softlimit correctly (Vinay)
- Restore SLPC efficient freq earlier (Vinay)
- Consider OA buffer boundary when zeroing out reports (Umesh)
- Extend Wa_14015795083 to TGL, RKL, DG1 and ADL (Matt R)
- Fix context workarounds with non-masked regs on MTL/DG2 (Lucas)
- Enable the CCS_FLUSH bit in the pipe control and in the CS for MTL+ (Andi)
- Update MTL workarounds 14018778641, 22016122933 (Tejas, Zhanjun)
- Ensure memory quiesced before AUX CCS invalidation (Jonathan)
- Add a gsc_info debugfs (Daniele)
- Invalidate the TLBs on each GT on multi-GT device (Chris)
- Fix a VMA UAF for multi-gt platform (Nirmoy)
- Do not use stolen on MTL due to HW bug (Nirmoy)
- Check HuC and GuC version compatibility on MTL (Daniele)
- Dump perf_limit_reasons for slow GuC init debug (Vinay)
- Replace kmap() with kmap_local_page() (Sumitra, Ira)
- Add sentinel to xehp_oa_b_counters for KASAN (Andrzej)
- Add the gen12_needs_ccs_aux_inv helper (Andi)
- Fixes and updates for GSC memory allocation (Daniele)
- Fix one wrong caching mode enum usage (Tvrtko)
- Fixes for GSC wakeref (Alan)
- Static checker fixes (Harshit, Arnd, Dan, Cristophe, David, Andi)
- Rename flags with bit_group_X according to the datasheet (Andi)
- Use direct alias for i915 in requests (Andrzej)
- Replace i915->gt0 with to_gt(i915) (Andi)
- Use the i915_vma_flush_writes helper (Tvrtko)
- Selftest improvements (Alan)
- Remove dead code (Tvrtko)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/i915/gt/uc/intel_gsc_fw.c
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZMy6kDd9npweR4uy@jlahtine-mobl.ger.corp.intel.com
- Removing unused declarations (Arnd, Gustavo)
- ICL+ DSI modeset sequence fixes (Ville)
- Improvements on HDCP (Suraj)
- Fixes and clean up on MTL Display (Mika Kahola, Lee, RK, Nirmoy, Chaitanya)
- Restore HSW/BDW PSR1 (Ville)
- Other PSR Fixes (Jouni)
- Fixes around DC states and other Display Power (Imre)
- Init DDI ports in VBT order (Ville)
- General documentation fixes (Jani)
- General refactor for better organization (Jani)
- Bigjoiner fix (Stanislav)
- VDSC Fixes and improvements (Stanialav, Suraj)
- Hotplug fixes and improvements (Simon, Suraj)
- Start using plane scale factor for relative data rate (Stanislav)
- Use shmem for dpt objects (RK)
- Simplify expression &to_i915(dev)->drm (Uwe)
- Do not access i915_gem_object members from frontbuffer tracking (Jouni)
- Fix uncore race around i915->params.mmio_debug (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZMv4RCzGyCmG/BDe@intel.com
When a symbol is selected that has extra dependencies,
anything that selects it must have the same dependencies.
With the added CONFIG_DRM reference from I2C_HID_CORE,
this broke a couple of drivers that now also depend
on DRM:
WARNING: unmet direct dependencies detected for I2C_HID_CORE
Depends on [m]: HID_SUPPORT [=y] && I2C_HID [=y] && (DRM [=m] || !DRM [=m])
Selected by [y]:
- I2C_HID_OF [=y] && HID_SUPPORT [=y] && I2C_HID [=y]
- I2C_HID_ACPI [=y] && HID_SUPPORT [=y] && I2C_HID [=y] && ACPI [=y]
- I2C_HID_OF_GOODIX [=y] && HID_SUPPORT [=y] && I2C_HID [=y] && OF [=y]
x86_64-linux-ld: vmlinux.o: in function `i2c_hid_core_remove':
(.text+0xfc8826): undefined reference to `drm_panel_remove_follower'
x86_64-linux-ld: vmlinux.o: in function `i2c_hid_core_probe':
(.text+0xfc8da0): undefined reference to `drm_is_panel_follower'
Add the corresponding DRM||!DRM dependencies on each one that
is affected.
Fixes: 96a37bfd23 ("HID: i2c-hid: Support being a panel follower")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230802124947.1355415-1-arnd@kernel.org
Use fb_info() to print status message at the end of the probe function,
which avoids decoding the devices. fb_info() works with or without an
fbdev kernel device. Fixes the following error:
../drivers/video/fbdev/ps3fb.c: In function 'ps3fb_probe':
../drivers/video/fbdev/ps3fb.c:1172:40: error: 'struct fb_info' has no member named 'dev'
1172 | dev_driver_string(info->dev), dev_name(info->dev),
| ^~
../include/linux/dev_printk.h:110:37: note: in definition of macro 'dev_printk_index_wrap'
110 | _p_func(dev, fmt, ##__VA_ARGS__); \
| ^~~~~~~~~~~
../drivers/video/fbdev/ps3fb.c:1171:9: note: in expansion of macro 'dev_info'
1171 | dev_info(info->device, "%s %s, using %u KiB of video memory\n",
| ^~~~~~~~
../drivers/video/fbdev/ps3fb.c:1172:61: error: 'struct fb_info' has no member named 'dev'
1172 | dev_driver_string(info->dev), dev_name(info->dev),
| ^~
../include/linux/dev_printk.h:110:37: note: in definition of macro 'dev_printk_index_wrap'
110 | _p_func(dev, fmt, ##__VA_ARGS__); \
| ^~~~~~~~~~~
../drivers/video/fbdev/ps3fb.c:1171:9: note: in expansion of macro 'dev_info'
1171 | dev_info(info->device, "%s %s, using %u KiB of video memory\n",
| ^~~~~~~~
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/lkml/ccc63065-2976-88ef-1211-731330bf2866@infradead.org/
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 701d2054fa ("fbdev: Make support for userspace interfaces configurable")
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://patchwork.freedesktop.org/patch/msgid/20230731175535.11345-1-tzimmermann@suse.de
This should be done before the soft min/max frequencies are restored.
When we disable the "Ignore efficient frequency" flag, GuC does not
actually bring the requested freq down to RPn.
Specifically, this scenario-
- ignore efficient freq set to true
- reduce min to RPn (from efficient)
- suspend
- resume (includes GuC load, restore soft min/max, restore efficient freq)
- validate min freq has been resored to RPn
This will fail if we didn't first restore(disable, in this case) efficient
freq flag before setting the soft min frequency.
v2: Bring the min freq down to RPn when we disable efficient freq (Rodrigo)
Also made the change to set the min softlimit to RPn at init. Otherwise, we
were storing RPe there.
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8736
Fixes: 55f9720dbf ("drm/i915/guc/slpc: Provide sysfs for efficient freq")
Fixes: 95ccf312a1 ("drm/i915/guc/slpc: Allow SLPC to use efficient frequency")
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230726010044.3280402-1-vinay.belgaumkar@intel.com
