Pull xen fixes from Juergen Gross:
"Two fixes for issues introduced in this merge window:
- fix enhanced debugging in the Xen multicall handling
- two patches fixing a boot failure when running as dom0 in PVH mode"
* tag 'for-linus-6.11-rc1a-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: fix memblock_reserve() usage on PVH
x86/xen: move xen_reserve_extra_memory()
xen: fix multicall debug data referencing
The current usage of memblock_reserve() in init_pvh_bootparams() is done before
the .bss is zeroed, and that used to be fine when
memblock_reserved_init_regions implicitly ended up in the .meminit.data
section. However after commit 73db3abdca memblock_reserved_init_regions
ends up in the .bss section, thus breaking it's usage before the .bss is
cleared.
Move and rename the call to xen_reserve_extra_memory() so it's done in the
x86_init.oem.arch_setup hook, which gets executed after the .bss has been
zeroed, but before calling e820__memory_setup().
Fixes: 73db3abdca ("init/modpost: conditionally check section mismatch to __meminit*")
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20240725073116.14626-3-roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Pull random number generator updates from Jason Donenfeld:
"This adds getrandom() support to the vDSO.
First, it adds a new kind of mapping to mmap(2), MAP_DROPPABLE, which
lets the kernel zero out pages anytime under memory pressure, which
enables allocating memory that never gets swapped to disk but also
doesn't count as being mlocked.
Then, the vDSO implementation of getrandom() is introduced in a
generic manner and hooked into random.c.
Next, this is implemented on x86. (Also, though it's not ready for
this pull, somebody has begun an arm64 implementation already)
Finally, two vDSO selftests are added.
There are also two housekeeping cleanup commits"
* tag 'random-6.11-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
MAINTAINERS: add random.h headers to RNG subsection
random: note that RNDGETPOOL was removed in 2.6.9-rc2
selftests/vDSO: add tests for vgetrandom
x86: vdso: Wire up getrandom() vDSO implementation
random: introduce generic vDSO getrandom() implementation
mm: add MAP_DROPPABLE for designating always lazily freeable mappings
Pull kvm updates from Paolo Bonzini:
"ARM:
- Initial infrastructure for shadow stage-2 MMUs, as part of nested
virtualization enablement
- Support for userspace changes to the guest CTR_EL0 value, enabling
(in part) migration of VMs between heterogenous hardware
- Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1
of the protocol
- FPSIMD/SVE support for nested, including merged trap configuration
and exception routing
- New command-line parameter to control the WFx trap behavior under
KVM
- Introduce kCFI hardening in the EL2 hypervisor
- Fixes + cleanups for handling presence/absence of FEAT_TCRX
- Miscellaneous fixes + documentation updates
LoongArch:
- Add paravirt steal time support
- Add support for KVM_DIRTY_LOG_INITIALLY_SET
- Add perf kvm-stat support for loongarch
RISC-V:
- Redirect AMO load/store access fault traps to guest
- perf kvm stat support
- Use guest files for IMSIC virtualization, when available
s390:
- Assortment of tiny fixes which are not time critical
x86:
- Fixes for Xen emulation
- Add a global struct to consolidate tracking of host values, e.g.
EFER
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the
effective APIC bus frequency, because TDX
- Print the name of the APICv/AVIC inhibits in the relevant
tracepoint
- Clean up KVM's handling of vendor specific emulation to
consistently act on "compatible with Intel/AMD", versus checking
for a specific vendor
- Drop MTRR virtualization, and instead always honor guest PAT on
CPUs that support self-snoop
- Update to the newfangled Intel CPU FMS infrastructure
- Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as
it reads '0' and writes from userspace are ignored
- Misc cleanups
x86 - MMU:
- Small cleanups, renames and refactoring extracted from the upcoming
Intel TDX support
- Don't allocate kvm_mmu_page.shadowed_translation for shadow pages
that can't hold leafs SPTEs
- Unconditionally drop mmu_lock when allocating TDP MMU page tables
for eager page splitting, to avoid stalling vCPUs when splitting
huge pages
- Bug the VM instead of simply warning if KVM tries to split a SPTE
that is non-present or not-huge. KVM is guaranteed to end up in a
broken state because the callers fully expect a valid SPTE, it's
all but dangerous to let more MMU changes happen afterwards
x86 - AMD:
- Make per-CPU save_area allocations NUMA-aware
- Force sev_es_host_save_area() to be inlined to avoid calling into
an instrumentable function from noinstr code
- Base support for running SEV-SNP guests. API-wise, this includes a
new KVM_X86_SNP_VM type, encrypting/measure the initial image into
guest memory, and finalizing it before launching it. Internally,
there are some gmem/mmu hooks needed to prepare gmem-allocated
pages before mapping them into guest private memory ranges
This includes basic support for attestation guest requests, enough
to say that KVM supports the GHCB 2.0 specification
There is no support yet for loading into the firmware those signing
keys to be used for attestation requests, and therefore no need yet
for the host to provide certificate data for those keys.
To support fetching certificate data from userspace, a new KVM exit
type will be needed to handle fetching the certificate from
userspace.
An attempt to define a new KVM_EXIT_COCO / KVM_EXIT_COCO_REQ_CERTS
exit type to handle this was introduced in v1 of this patchset, but
is still being discussed by community, so for now this patchset
only implements a stub version of SNP Extended Guest Requests that
does not provide certificate data
x86 - Intel:
- Remove an unnecessary EPT TLB flush when enabling hardware
- Fix a series of bugs that cause KVM to fail to detect nested
pending posted interrupts as valid wake eents for a vCPU executing
HLT in L2 (with HLT-exiting disable by L1)
- KVM: x86: Suppress MMIO that is triggered during task switch
emulation
Explicitly suppress userspace emulated MMIO exits that are
triggered when emulating a task switch as KVM doesn't support
userspace MMIO during complex (multi-step) emulation
Silently ignoring the exit request can result in the
WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to userspace
for some other reason prior to purging mmio_needed
See commit 0dc902267c ("KVM: x86: Suppress pending MMIO write
exits if emulator detects exception") for more details on KVM's
limitations with respect to emulated MMIO during complex emulator
flows
Generic:
- Rename the AS_UNMOVABLE flag that was introduced for KVM to
AS_INACCESSIBLE, because the special casing needed by these pages
is not due to just unmovability (and in fact they are only
unmovable because the CPU cannot access them)
- New ioctl to populate the KVM page tables in advance, which is
useful to mitigate KVM page faults during guest boot or after live
migration. The code will also be used by TDX, but (probably) not
through the ioctl
- Enable halt poll shrinking by default, as Intel found it to be a
clear win
- Setup empty IRQ routing when creating a VM to avoid having to
synchronize SRCU when creating a split IRQCHIP on x86
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with
a flag that arch code can use for hooking both sched_in() and
sched_out()
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace
detect bugs
- Mark a vCPU as preempted if and only if it's scheduled out while in
the KVM_RUN loop, e.g. to avoid marking it preempted and thus
writing guest memory when retrieving guest state during live
migration blackout
Selftests:
- Remove dead code in the memslot modification stress test
- Treat "branch instructions retired" as supported on all AMD Family
17h+ CPUs
- Print the guest pseudo-RNG seed only when it changes, to avoid
spamming the log for tests that create lots of VMs
- Make the PMU counters test less flaky when counting LLC cache
misses by doing CLFLUSH{OPT} in every loop iteration"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
crypto: ccp: Add the SNP_VLEK_LOAD command
KVM: x86/pmu: Add kvm_pmu_call() to simplify static calls of kvm_pmu_ops
KVM: x86: Introduce kvm_x86_call() to simplify static calls of kvm_x86_ops
KVM: x86: Replace static_call_cond() with static_call()
KVM: SEV: Provide support for SNP_EXTENDED_GUEST_REQUEST NAE event
x86/sev: Move sev_guest.h into common SEV header
KVM: SEV: Provide support for SNP_GUEST_REQUEST NAE event
KVM: x86: Suppress MMIO that is triggered during task switch emulation
KVM: x86/mmu: Clean up make_huge_page_split_spte() definition and intro
KVM: x86/mmu: Bug the VM if KVM tries to split a !hugepage SPTE
KVM: selftests: x86: Add test for KVM_PRE_FAULT_MEMORY
KVM: x86: Implement kvm_arch_vcpu_pre_fault_memory()
KVM: x86/mmu: Make kvm_mmu_do_page_fault() return mapped level
KVM: x86/mmu: Account pf_{fixed,emulate,spurious} in callers of "do page fault"
KVM: x86/mmu: Bump pf_taken stat only in the "real" page fault handler
KVM: Add KVM_PRE_FAULT_MEMORY vcpu ioctl to pre-populate guest memory
KVM: Document KVM_PRE_FAULT_MEMORY ioctl
mm, virt: merge AS_UNMOVABLE and AS_INACCESSIBLE
perf kvm: Add kvm-stat for loongarch64
LoongArch: KVM: Add PV steal time support in guest side
...
Hook up the generic vDSO implementation to the x86 vDSO data page. Since
the existing vDSO infrastructure is heavily based on the timekeeping
functionality, which works over arrays of bases, a new macro is
introduced for vvars that are not arrays.
The vDSO function requires a ChaCha20 implementation that does not write
to the stack, yet can still do an entire ChaCha20 permutation, so
provide this using SSE2, since this is userland code that must work on
all x86-64 processors.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Samuel Neves <sneves@dei.uc.pt> # for vgetrandom-chacha.S
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Pull x86 percpu updates from Ingo Molnar:
- Enable the named address spaces based percpu accessors optimization
on all GCC versions that contain this feature, detected through a
build-time testcase.
This effectively enables the feature on GCC 6, GCC 7 and GCC 8
versions.
- Fix operand constraint modifier in __raw_cpu_write()
- Reorganize the per-CPU headers for better readability
- Misc cleanups and fixes
* tag 'x86-percpu-2024-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/percpu: Enable named address spaces for all capable GCC versions
x86/percpu: Clean up <asm/percpu.h> vertical alignment details
x86/percpu: Clean up <asm/percpu.h> a bit
x86/percpu: Move some percpu accessors around to reduce ifdeffery
x86/percpu: Rename percpu_stable_op() to __raw_cpu_read_stable()
x86/percpu: Fix operand constraint modifier in __raw_cpu_write()
x86/percpu: Introduce the __raw_cpu_read_const() macro
x86/percpu: Unify percpu read-write accessors
x86/percpu: Move some percpu macros around for readability
x86/percpu: Introduce the pcpu_binary_op() macro
Pull ftrace updates from Steven Rostedt:
"Rewrite of function graph tracer to allow multiple users
Up until now, the function graph tracer could only have a single user
attached to it. If another user tried to attach to the function graph
tracer while one was already attached, it would fail. Allowing
function graph tracer to have more than one user has been asked for
since 2009, but it required a rewrite to the logic to pull it off so
it never happened. Until now!
There's three systems that trace the return of a function. That is
kretprobes, function graph tracer, and BPF. kretprobes and function
graph tracing both do it similarly. The difference is that kretprobes
uses a shadow stack per callback and function graph tracer creates a
shadow stack for all tasks. The function graph tracer method makes it
possible to trace the return of all functions. As kretprobes now needs
that feature too, allowing it to use function graph tracer was needed.
BPF also wants to trace the return of many probes and its method
doesn't scale either. Having it use function graph tracer would
improve that.
By allowing function graph tracer to have multiple users allows both
kretprobes and BPF to use function graph tracer in these cases. This
will allow kretprobes code to be removed in the future as it's version
will no longer be needed.
Note, function graph tracer is only limited to 16 simultaneous users,
due to shadow stack size and allocated slots"
* tag 'ftrace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (49 commits)
fgraph: Use str_plural() in test_graph_storage_single()
function_graph: Add READ_ONCE() when accessing fgraph_array[]
ftrace: Add missing kerneldoc parameters to unregister_ftrace_direct()
function_graph: Everyone uses HAVE_FUNCTION_GRAPH_RET_ADDR_PTR, remove it
function_graph: Fix up ftrace_graph_ret_addr()
function_graph: Make fgraph_update_pid_func() a stub for !DYNAMIC_FTRACE
function_graph: Rename BYTE_NUMBER to CHAR_NUMBER in selftests
fgraph: Remove some unused functions
ftrace: Hide one more entry in stack trace when ftrace_pid is enabled
function_graph: Do not update pid func if CONFIG_DYNAMIC_FTRACE not enabled
function_graph: Make fgraph_do_direct static key static
ftrace: Fix prototypes for ftrace_startup/shutdown_subops()
ftrace: Assign RCU list variable with rcu_assign_ptr()
ftrace: Assign ftrace_list_end to ftrace_ops_list type cast to RCU
ftrace: Declare function_trace_op in header to quiet sparse warning
ftrace: Add comments to ftrace_hash_move() and friends
ftrace: Convert "inc" parameter to bool in ftrace_hash_rec_update_modify()
ftrace: Add comments to ftrace_hash_rec_disable/enable()
ftrace: Remove "filter_hash" parameter from __ftrace_hash_rec_update()
ftrace: Rename dup_hash() and comment it
...
Pull probes updates from Masami Hiramatsu:
"Uprobes:
- x86/shstk: Make return uprobe work with shadow stack
- Add uretprobe syscall which speeds up the uretprobe 10-30% faster.
This syscall is automatically used from user-space trampolines
which are generated by the uretprobe. If this syscall is used by
normal user program, it will cause SIGILL. Note that this is
currently only implemented on x86_64.
(This also has two fixes for adjusting the syscall number to avoid
conflict with new *attrat syscalls.)
- uprobes/perf: fix user stack traces in the presence of pending
uretprobe. This corrects the uretprobe's trampoline address in the
stacktrace with correct return address
- selftests/x86: Add a return uprobe with shadow stack test
- selftests/bpf: Add uretprobe syscall related tests.
- test case for register integrity check
- test case with register changing case
- test case for uretprobe syscall without uprobes (expected to fail)
- test case for uretprobe with shadow stack
- selftests/bpf: add test validating uprobe/uretprobe stack traces
- MAINTAINERS: Add uprobes entry. This does not specify the tree but
to clarify who maintains and reviews the uprobes
Kprobes:
- tracing/kprobes: Test case cleanups.
Replace redundant WARN_ON_ONCE() + pr_warn() with WARN_ONCE() and
remove unnecessary code from selftest
- tracing/kprobes: Add symbol counting check when module loads.
This checks the uniqueness of the probed symbol on modules. The
same check has already done for kernel symbols
(This also has a fix for build error with CONFIG_MODULES=n)
Cleanup:
- Add MODULE_DESCRIPTION() macros for fprobe and kprobe examples"
* tag 'probes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
MAINTAINERS: Add uprobes entry
selftests/bpf: Change uretprobe syscall number in uprobe_syscall test
uprobe: Change uretprobe syscall scope and number
tracing/kprobes: Fix build error when find_module() is not available
tracing/kprobes: Add symbol counting check when module loads
selftests/bpf: add test validating uprobe/uretprobe stack traces
perf,uprobes: fix user stack traces in the presence of pending uretprobes
tracing/kprobe: Remove cleanup code unrelated to selftest
tracing/kprobe: Integrate test warnings into WARN_ONCE
selftests/bpf: Add uretprobe shadow stack test
selftests/bpf: Add uretprobe syscall call from user space test
selftests/bpf: Add uretprobe syscall test for regs changes
selftests/bpf: Add uretprobe syscall test for regs integrity
selftests/x86: Add return uprobe shadow stack test
uprobe: Add uretprobe syscall to speed up return probe
uprobe: Wire up uretprobe system call
x86/shstk: Make return uprobe work with shadow stack
samples: kprobes: add missing MODULE_DESCRIPTION() macros
fprobe: add missing MODULE_DESCRIPTION() macro
Pull performance events updates from Ingo Molnar:
- Intel PT support enhancements & fixes
- Fix leaked SIGTRAP events
- Improve and fix the Intel uncore driver
- Add support for Intel HBM and CXL uncore counters
- Add Intel Lake and Arrow Lake support
- AMD uncore driver fixes
- Make SIGTRAP and __perf_pending_irq() work on RT
- Micro-optimizations
- Misc cleanups and fixes
* tag 'perf-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
perf/x86/intel: Add a distinct name for Granite Rapids
perf/x86/intel/ds: Fix non 0 retire latency on Raptorlake
perf/x86/intel: Hide Topdown metrics events if the feature is not enumerated
perf/x86/intel/uncore: Fix the bits of the CHA extended umask for SPR
perf: Split __perf_pending_irq() out of perf_pending_irq()
perf: Don't disable preemption in perf_pending_task().
perf: Move swevent_htable::recursion into task_struct.
perf: Shrink the size of the recursion counter.
perf: Enqueue SIGTRAP always via task_work.
task_work: Add TWA_NMI_CURRENT as an additional notify mode.
perf: Move irq_work_queue() where the event is prepared.
perf: Fix event leak upon exec and file release
perf: Fix event leak upon exit
task_work: Introduce task_work_cancel() again
task_work: s/task_work_cancel()/task_work_cancel_func()/
perf/x86/amd/uncore: Fix DF and UMC domain identification
perf/x86/amd/uncore: Avoid PMU registration if counters are unavailable
perf/x86/intel: Support Perfmon MSRs aliasing
perf/x86/intel: Support PERFEVTSEL extension
perf/x86: Add config_mask to represent EVENTSEL bitmask
...
Pull power management updates from Rafael Wysocki:
"These add a new cpufreq driver for Loongson-3, add support for new
features in the intel_pstate (Lunar Lake and Arrow Lake platforms, OOB
mode for Emerald Rapids, highest performance change interrupt),
amd-pstate (fast CPPC) and sun50i (Allwinner H700 speed bin) cpufreq
drivers, simplify the cpufreq driver interface, simplify the teo
cpuidle governor, adjust the pm-graph utility for a new version of
Python, address issues and clean up code.
Specifics:
- Add Loongson-3 CPUFreq driver support (Huacai Chen)
- Add support for the Arrow Lake and Lunar Lake platforms and the
out-of-band (OOB) mode on Emerald Rapids to the intel_pstate
cpufreq driver, make it support the highest performance change
interrupt and clean it up (Srinivas Pandruvada)
- Switch cpufreq to new Intel CPU model defines (Tony Luck)
- Simplify the cpufreq driver interface by switching the .exit()
driver callback to the void return data type (Lizhe, Viresh Kumar)
- Make cpufreq_boost_enabled() return bool (Dhruva Gole)
- Add fast CPPC support to the amd-pstate cpufreq driver, address
multiple assorted issues in it and clean it up (Perry Yuan, Mario
Limonciello, Dhananjay Ugwekar, Meng Li, Xiaojian Du)
- Add Allwinner H700 speed bin to the sun50i cpufreq driver (Ryan
Walklin)
- Fix memory leaks and of_node_put() usage in the sun50i and
qcom-nvmem cpufreq drivers (Javier Carrasco)
- Clean up the sti and dt-platdev cpufreq drivers (Jeff Johnson,
Raphael Gallais-Pou)
- Fix deferred probe handling in the TI cpufreq driver and wrong
return values of ti_opp_supply_probe(), and add OPP tables for the
AM62Ax and AM62Px SoCs to it (Bryan Brattlof, Primoz Fiser)
- Avoid overflow of target_freq in .fast_switch() in the SCMI cpufreq
driver (Jagadeesh Kona)
- Use dev_err_probe() in every error path in probe in the Mediatek
cpufreq driver (Nícolas Prado)
- Fix kernel-doc param for longhaul_setstate in the longhaul cpufreq
driver (Yang Li)
- Fix system resume handling in the CPPC cpufreq driver (Riwen Lu)
- Improve the teo cpuidle governor and clean up leftover comments
from the menu cpuidle governor (Christian Loehle)
- Clean up a comment typo in the teo cpuidle governor (Atul Kumar
Pant)
- Add missing MODULE_DESCRIPTION() macro to cpuidle haltpoll (Jeff
Johnson)
- Switch the intel_idle driver to new Intel CPU model defines (Tony
Luck)
- Switch the Intel RAPL driver new Intel CPU model defines (Tony
Luck)
- Simplify if condition in the idle_inject driver (Thorsten Blum)
- Fix missing cleanup on error in _opp_attach_genpd() (Viresh Kumar)
- Introduce an OF helper function to inform if required-opps is used
and drop a redundant in-parameter to _set_opp_level() (Ulf Hansson)
- Update pm-graph to v5.12 which includes fixes and major code revamp
for python3.12 (Todd Brandt)
- Address several assorted issues in the cpupower utility (Roman
Storozhenko)"
* tag 'pm-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (77 commits)
cpufreq: sti: fix build warning
cpufreq: mediatek: Use dev_err_probe in every error path in probe
cpufreq: Add Loongson-3 CPUFreq driver support
cpufreq: Make cpufreq_driver->exit() return void
cpufreq/amd-pstate: Fix the scaling_max_freq setting on shared memory CPPC systems
cpufreq/amd-pstate-ut: Convert nominal_freq to khz during comparisons
cpufreq: pcc: Remove empty exit() callback
cpufreq: loongson2: Remove empty exit() callback
cpufreq: nforce2: Remove empty exit() callback
cpupower: fix lib default installation path
cpufreq: docs: Add missing scaling_available_frequencies description
cpuidle: teo: Don't count non-existent intercepts
cpupower: Disable direct build of the 'bench' subproject
cpuidle: teo: Remove recent intercepts metric
Revert: "cpuidle: teo: Introduce util-awareness"
cpufreq: make cpufreq_boost_enabled() return bool
cpufreq: intel_pstate: Support highest performance change interrupt
x86/cpufeatures: Add HWP highest perf change feature flag
Documentation: cpufreq: amd-pstate: update doc for Per CPU boost control method
cpufreq: amd-pstate: Cap the CPPC.max_perf to nominal_perf if CPB is off
...
Pull EFI updates from Ard Biesheuvel:
"Note the removal of the EFI fake memory map support - this is believed
to be unused and no longer worth supporting. However, we could easily
bring it back if needed.
With recent developments regarding confidential VMs and unaccepted
memory, combined with kexec, creating a known inaccurate view of the
firmware's memory map and handing it to the OS is a feature we can
live without, hence the removal. Alternatively, I could imagine making
this feature mutually exclusive with those confidential VM related
features, but let's try simply removing it first.
Summary:
- Drop support for the 'fake' EFI memory map on x86
- Add an SMBIOS based tweak to the EFI stub instructing the firmware
on x86 Macbook Pros to keep both GPUs enabled
- Replace 0-sized array with flexible array in EFI memory attributes
table handling
- Drop redundant BSS clearing when booting via the native PE
entrypoint on x86
- Avoid returning EFI_SUCCESS when aborting on an out-of-memory
condition
- Cosmetic tweak for arm64 KASLR loading logic"
* tag 'efi-next-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Replace efi_memory_attributes_table_t 0-sized array with flexible array
efi: Rename efi_early_memdesc_ptr() to efi_memdesc_ptr()
arm64/efistub: Clean up KASLR logic
x86/efistub: Drop redundant clearing of BSS
x86/efistub: Avoid returning EFI_SUCCESS on error
x86/efistub: Call Apple set_os protocol on dual GPU Intel Macs
x86/efistub: Enable SMBIOS protocol handling for x86
efistub/smbios: Simplify SMBIOS enumeration API
x86/efi: Drop support for fake EFI memory maps
Pull asm-generic updates from Arnd Bergmann:
"Most of this is part of my ongoing work to clean up the system call
tables. In this bit, all of the newer architectures are converted to
use the machine readable syscall.tbl format instead in place of
complex macros in include/uapi/asm-generic/unistd.h.
This follows an earlier series that fixed various API mismatches and
in turn is used as the base for planned simplifications.
The other two patches are dead code removal and a warning fix"
* tag 'asm-generic-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
vmlinux.lds.h: catch .bss..L* sections into BSS")
fixmap: Remove unused set_fixmap_offset_io()
riscv: convert to generic syscall table
openrisc: convert to generic syscall table
nios2: convert to generic syscall table
loongarch: convert to generic syscall table
hexagon: use new system call table
csky: convert to generic syscall table
arm64: rework compat syscall macros
arm64: generate 64-bit syscall.tbl
arm64: convert unistd_32.h to syscall.tbl format
arc: convert to generic syscall table
clone3: drop __ARCH_WANT_SYS_CLONE3 macro
kbuild: add syscall table generation to scripts/Makefile.asm-headers
kbuild: verify asm-generic header list
loongarch: avoid generating extra header files
um: don't generate asm/bpf_perf_event.h
csky: drop asm/gpio.h wrapper
syscalls: add generic scripts/syscall.tbl
Pull x86 SEV updates from Borislav Petkov:
- Add support for running the kernel in a SEV-SNP guest, over a Secure
VM Service Module (SVSM).
When running over a SVSM, different services can run at different
protection levels, apart from the guest OS but still within the
secure SNP environment. They can provide services to the guest, like
a vTPM, for example.
This series adds the required facilities to interface with such a
SVSM module.
- The usual fixlets, refactoring and cleanups
[ And as always: "SEV" is AMD's "Secure Encrypted Virtualization".
I can't be the only one who gets all the newer x86 TLA's confused,
can I?
- Linus ]
* tag 'x86_sev_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/ABI/configfs-tsm: Fix an unexpected indentation silly
x86/sev: Do RMP memory coverage check after max_pfn has been set
x86/sev: Move SEV compilation units
virt: sev-guest: Mark driver struct with __refdata to prevent section mismatch
x86/sev: Allow non-VMPL0 execution when an SVSM is present
x86/sev: Extend the config-fs attestation support for an SVSM
x86/sev: Take advantage of configfs visibility support in TSM
fs/configfs: Add a callback to determine attribute visibility
sev-guest: configfs-tsm: Allow the privlevel_floor attribute to be updated
virt: sev-guest: Choose the VMPCK key based on executing VMPL
x86/sev: Provide guest VMPL level to userspace
x86/sev: Provide SVSM discovery support
x86/sev: Use the SVSM to create a vCPU when not in VMPL0
x86/sev: Perform PVALIDATE using the SVSM when not at VMPL0
x86/sev: Use kernel provided SVSM Calling Areas
x86/sev: Check for the presence of an SVSM in the SNP secrets page
x86/irqflags: Provide native versions of the local_irq_save()/restore()
Pull x86 resource control updates from Borislav Petkov:
- Enable Sub-NUMA clustering to work with resource control on Intel by
teaching resctrl to handle scopes due to the clustering which
partitions the L3 cache into sets. Modify and extend the subsystem to
handle such scopes properly
* tag 'x86_cache_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Update documentation with Sub-NUMA cluster changes
x86/resctrl: Detect Sub-NUMA Cluster (SNC) mode
x86/resctrl: Enable shared RMID mode on Sub-NUMA Cluster (SNC) systems
x86/resctrl: Make __mon_event_count() handle sum domains
x86/resctrl: Fill out rmid_read structure for smp_call*() to read a counter
x86/resctrl: Handle removing directories in Sub-NUMA Cluster (SNC) mode
x86/resctrl: Create Sub-NUMA Cluster (SNC) monitor files
x86/resctrl: Allocate a new field in union mon_data_bits
x86/resctrl: Refactor mkdir_mondata_subdir() with a helper function
x86/resctrl: Initialize on-stack struct rmid_read instances
x86/resctrl: Add a new field to struct rmid_read for summation of domains
x86/resctrl: Prepare for new Sub-NUMA Cluster (SNC) monitor files
x86/resctrl: Block use of mba_MBps mount option on Sub-NUMA Cluster (SNC) systems
x86/resctrl: Introduce snc_nodes_per_l3_cache
x86/resctrl: Add node-scope to the options for feature scope
x86/resctrl: Split the rdt_domain and rdt_hw_domain structures
x86/resctrl: Prepare for different scope for control/monitor operations
x86/resctrl: Prepare to split rdt_domain structure
x86/resctrl: Prepare for new domain scope
Introduces kvm_x86_call(), to streamline the usage of static calls of
kvm_x86_ops. The current implementation of these calls is verbose and
could lead to alignment challenges. This makes the code susceptible to
exceeding the "80 columns per single line of code" limit as defined in
the coding-style document. Another issue with the existing implementation
is that the addition of kvm_x86_ prefix to hooks at the static_call sites
hinders code readability and navigation. kvm_x86_call() is added to
improve code readability and maintainability, while adhering to the coding
style guidelines.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Link: https://lore.kernel.org/r/20240507133103.15052-3-wei.w.wang@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The GHCB 2.0 specification defines 2 GHCB request types to allow SNP guests
to send encrypted messages/requests to firmware: SNP Guest Requests and SNP
Extended Guest Requests. These encrypted messages are used for things like
servicing attestation requests issued by the guest. Implementing support for
these is required to be fully GHCB-compliant.
For the most part, KVM only needs to handle forwarding these requests to
firmware (to be issued via the SNP_GUEST_REQUEST firmware command defined
in the SEV-SNP Firmware ABI), and then forwarding the encrypted response to
the guest.
However, in the case of SNP Extended Guest Requests, the host is also
able to provide the certificate data corresponding to the endorsement key
used by firmware to sign attestation report requests. This certificate data
is provided by userspace because:
1) It allows for different keys/key types to be used for each particular
guest with requiring any sort of KVM API to configure the certificate
table in advance on a per-guest basis.
2) It provides additional flexibility with how attestation requests might
be handled during live migration where the certificate data for
source/dest might be different.
3) It allows all synchronization between certificates and firmware/signing
key updates to be handled purely by userspace rather than requiring
some in-kernel mechanism to facilitate it. [1]
To support fetching certificate data from userspace, a new KVM exit type will
be needed to handle fetching the certificate from userspace. An attempt to
define a new KVM_EXIT_COCO/KVM_EXIT_COCO_REQ_CERTS exit type to handle this
was introduced in v1 of this patchset, but is still being discussed by
community, so for now this patchset only implements a stub version of SNP
Extended Guest Requests that does not provide certificate data, but is still
enough to provide compliance with the GHCB 2.0 spec.
sev_guest.h currently contains various definitions relating to the
format of SNP_GUEST_REQUEST commands to SNP firmware. Currently only the
sev-guest driver makes use of them, but when the KVM side of this is
implemented there's a need to parse the SNP_GUEST_REQUEST header to
determine whether additional information needs to be provided to the
guest. Prepare for this by moving those definitions to a common header
that's shared by host/guest code so that KVM can also make use of them.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240701223148.3798365-3-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM VMX changes for 6.11
- Remove an unnecessary EPT TLB flush when enabling hardware.
- Fix a series of bugs that cause KVM to fail to detect nested pending posted
interrupts as valid wake eents for a vCPU executing HLT in L2 (with
HLT-exiting disable by L1).
- Misc cleanups
KVM x86/pmu changes for 6.11
- Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as it reads
'0' and writes from userspace are ignored.
- Update to the newfangled Intel CPU FMS infrastructure.
- Use macros instead of open-coded literals to clean up KVM's manipulation of
FIXED_CTR_CTRL MSRs.
KVM x86 MTRR virtualization removal
Remove support for virtualizing MTRRs on Intel CPUs, along with a nasty CR0.CD
hack, and instead always honor guest PAT on CPUs that support self-snoop.
KVM x86 misc changes for 6.11
- Add a global struct to consolidate tracking of host values, e.g. EFER, and
move "shadow_phys_bits" into the structure as "maxphyaddr".
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC
bus frequency, because TDX.
- Print the name of the APICv/AVIC inhibits in the relevant tracepoint.
- Clean up KVM's handling of vendor specific emulation to consistently act on
"compatible with Intel/AMD", versus checking for a specific vendor.
- Misc cleanups
KVM generic changes for 6.11
- Enable halt poll shrinking by default, as Intel found it to be a clear win.
- Setup empty IRQ routing when creating a VM to avoid having to synchronize
SRCU when creating a split IRQCHIP on x86.
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag
that arch code can use for hooking both sched_in() and sched_out().
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace detect bugs.
- Mark a vCPU as preempted if and only if it's scheduled out while in the
KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest
memory when retrieving guest state during live migration blackout.
- A few minor cleanups
Pull x86 cpu model updates from Borislav Petkov:
- Flip the logic to add feature names to /proc/cpuinfo to having to
explicitly specify the flag if there's a valid reason to show it in
/proc/cpuinfo
- Switch a bunch of Intel x86 model checking code to the new CPU model
defines
- Fixes and cleanups
* tag 'x86_cpu_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/intel: Drop stray FAM6 check with new Intel CPU model defines
x86/cpufeatures: Flip the /proc/cpuinfo appearance logic
x86/CPU/AMD: Always inline amd_clear_divider()
x86/mce/inject: Add missing MODULE_DESCRIPTION() line
perf/x86/rapl: Switch to new Intel CPU model defines
x86/boot: Switch to new Intel CPU model defines
x86/cpu: Switch to new Intel CPU model defines
perf/x86/intel: Switch to new Intel CPU model defines
x86/virt/tdx: Switch to new Intel CPU model defines
x86/PCI: Switch to new Intel CPU model defines
x86/cpu/intel: Switch to new Intel CPU model defines
x86/platform/intel-mid: Switch to new Intel CPU model defines
x86/pconfig: Remove unused MKTME pconfig code
x86/cpu: Remove useless work in detect_tme_early()
Pull x86 vmware updates from Borislav Petkov:
- Add a unified VMware hypercall API layer which should be used by all
callers instead of them doing homegrown solutions. This will provide
for adding API support for confidential computing solutions like TDX
* tag 'x86_vmware_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vmware: Add TDX hypercall support
x86/vmware: Remove legacy VMWARE_HYPERCALL* macros
x86/vmware: Correct macro names
x86/vmware: Use VMware hypercall API
drm/vmwgfx: Use VMware hypercall API
input/vmmouse: Use VMware hypercall API
ptp/vmware: Use VMware hypercall API
x86/vmware: Introduce VMware hypercall API
Pull misc x86 updates from Borislav Petkov:
- Make error checking of AMD SMN accesses more robust in the callers as
they're the only ones who can interpret the results properly
- The usual cleanups and fixes, left and right
* tag 'x86_misc_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kmsan: Fix hook for unaligned accesses
x86/platform/iosf_mbi: Convert PCIBIOS_* return codes to errnos
x86/pci/xen: Fix PCIBIOS_* return code handling
x86/pci/intel_mid_pci: Fix PCIBIOS_* return code handling
x86/of: Return consistent error type from x86_of_pci_irq_enable()
hwmon: (k10temp) Rename _data variable
hwmon: (k10temp) Remove unused HAVE_TDIE() macro
hwmon: (k10temp) Reduce k10temp_get_ccd_support() parameters
hwmon: (k10temp) Define a helper function to read CCD temperature
x86/amd_nb: Enhance SMN access error checking
hwmon: (k10temp) Check return value of amd_smn_read()
EDAC/amd64: Check return value of amd_smn_read()
EDAC/amd64: Remove unused register accesses
tools/x86/kcpuid: Add missing dir via Makefile
x86, arm: Add missing license tag to syscall tables files
Pull x86 confidential computing updates from Borislav Petkov:
"Unrelated x86/cc changes queued here to avoid ugly cross-merges and
conflicts:
- Carve out CPU hotplug function declarations into a separate header
with the goal to be able to use the lockdep assertions in a more
flexible manner
- As a result, refactor cacheinfo code after carving out a function
to return the cache ID associated with a given cache level
- Cleanups
Add support to be able to kexec TDX guests:
- Expand ACPI MADT CPU offlining support
- Add machinery to prepare CoCo guests memory before kexec-ing into a
new kernel
- Cleanup, readjust and massage related code"
* tag 'x86_cc_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
ACPI: tables: Print MULTIPROC_WAKEUP when MADT is parsed
x86/acpi: Add support for CPU offlining for ACPI MADT wakeup method
x86/mm: Introduce kernel_ident_mapping_free()
x86/smp: Add smp_ops.stop_this_cpu() callback
x86/acpi: Do not attempt to bring up secondary CPUs in the kexec case
x86/acpi: Rename fields in the acpi_madt_multiproc_wakeup structure
x86/mm: Do not zap page table entries mapping unaccepted memory table during kdump
x86/mm: Make e820__end_ram_pfn() cover E820_TYPE_ACPI ranges
x86/tdx: Convert shared memory back to private on kexec
x86/mm: Add callbacks to prepare encrypted memory for kexec
x86/tdx: Account shared memory
x86/mm: Return correct level from lookup_address() if pte is none
x86/mm: Make x86_platform.guest.enc_status_change_*() return an error
x86/kexec: Keep CR4.MCE set during kexec for TDX guest
x86/relocate_kernel: Use named labels for less confusion
cpu/hotplug, x86/acpi: Disable CPU offlining for ACPI MADT wakeup
cpu/hotplug: Add support for declaring CPU offlining not supported
x86/apic: Mark acpi_mp_wake_* variables as __ro_after_init
x86/acpi: Extract ACPI MADT wakeup code into a separate file
x86/kexec: Remove spurious unconditional JMP from from identity_mapped()
...
Pull x86 boot updates from Borislav Petkov:
- Add a check to warn when cmdline parsing happens before the final
cmdline string has been built and thus arguments can get lost
- Code cleanups and simplifications
* tag 'x86_boot_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/setup: Warn when option parsing is done too early
x86/boot: Clean up the arch/x86/boot/main.c code a bit
x86/boot: Use current_stack_pointer to avoid asm() in init_heap()
Pull x86 alternatives updates from Borislav Petkov:
"This is basically PeterZ's idea to nest the alternative macros to
avoid the need to "spell out" the number of alternates in an
ALTERNATIVE_n() macro and thus have an ever-increasing complexity in
those definitions.
For ease of bisection, the old macros are converted to the new, nested
variants in a step-by-step manner so that in case an issue is
encountered during testing, one can pinpoint the place where it fails
easier.
Because debugging alternatives is a serious pain"
* tag 'x86_alternatives_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives, kvm: Fix a couple of CALLs without a frame pointer
x86/alternative: Replace the old macros
x86/alternative: Convert the asm ALTERNATIVE_3() macro
x86/alternative: Convert the asm ALTERNATIVE_2() macro
x86/alternative: Convert the asm ALTERNATIVE() macro
x86/alternative: Convert ALTERNATIVE_3()
x86/alternative: Convert ALTERNATIVE_TERNARY()
x86/alternative: Convert alternative_call_2()
x86/alternative: Convert alternative_call()
x86/alternative: Convert alternative_io()
x86/alternative: Convert alternative_input()
x86/alternative: Convert alternative_2()
x86/alternative: Convert alternative()
x86/alternatives: Add nested alternatives macros
x86/alternative: Zap alternative_ternary()
Pull RAS updates from Borislav Petkov:
- A cleanup and a correction to the error injection driver to inject a
MCA_MISC value only when one has actually been supplied by the user
* tag 'ras_core_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Remove unused variable and return value in machine_check_poll()
x86/mce/inject: Only write MCA_MISC when a value has been supplied
Pull timer updates from Thomas Gleixner:
"Updates for timers, timekeeping and related functionality:
Core:
- Make the takeover of a hrtimer based broadcast timer reliable
during CPU hot-unplug. The current implementation suffers from a
race which can lead to broadcast timer starvation in the worst
case.
- VDSO related cleanups and simplifications
- Small cleanups and enhancements all over the place
PTP:
- Replace the architecture specific base clock to clocksource, e.g.
ART to TSC, conversion function with generic functionality to avoid
exposing such internals to drivers and convert all existing drivers
over. This also allows to provide functionality which converts the
other way round in the core code based on the same parameter set.
- Provide a function to convert CLOCK_REALTIME to the base clock to
support the upcoming PPS output driver on Intel platforms.
Drivers:
- A set of Device Tree bindings for new hardware
- Cleanups and enhancements all over the place"
* tag 'timers-core-2024-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
clocksource/drivers/realtek: Add timer driver for rtl-otto platforms
dt-bindings: timer: Add schema for realtek,otto-timer
dt-bindings: timer: Add SOPHGO SG2002 clint
dt-bindings: timer: renesas,tmu: Add R-Car Gen2 support
dt-bindings: timer: renesas,tmu: Add RZ/G1 support
dt-bindings: timer: renesas,tmu: Add R-Mobile APE6 support
clocksource/drivers/mips-gic-timer: Correct sched_clock width
clocksource/drivers/mips-gic-timer: Refine rating computation
clocksource/drivers/sh_cmt: Address race condition for clock events
clocksource/driver/arm_global_timer: Remove unnecessary ‘0’ values from err
clocksource/drivers/arm_arch_timer: Remove unnecessary ‘0’ values from irq
tick/broadcast: Make takeover of broadcast hrtimer reliable
tick/sched: Combine WARN_ON_ONCE and print_once
x86/vdso: Remove unused include
x86/vgtod: Remove unused typedef gtod_long_t
x86/vdso: Fix function reference in comment
vdso: Add comment about reason for vdso struct ordering
vdso/gettimeofday: Clarify comment about open coded function
timekeeping: Add missing kernel-doc function comments
tick: Remove unnused tick_nohz_get_idle_calls()
...
Merge minor word-at-a-time instruction choice improvements for x86 and
arm64.
This is the second of four branches that came out of me looking at the
code generation for path lookup on arm64.
The word-at-a-time infrastructure is used to do string operations in
chunks of one word both when copying the pathname from user space (in
strncpy_from_user()), and when parsing and hashing the individual path
components (in link_path_walk()).
In particular, the "find the first zero byte" uses various bit tricks to
figure out the end of the string or path component, and get the length
without having to do things one byte at a time. Both x86-64 and arm64
had less than optimal code choices for that.
The commit message for the arm64 change in particular tries to explain
the exact code flow for the zero byte finding for people who care. It's
made a bit more complicated by the fact that we support big-endian
hardware too, and so we have some extra abstraction layers to allow
different models for finding the zero byte, quite apart from the issue
of picking specialized instructions.
* word-at-a-time:
arm64: word-at-a-time: improve byte count calculations for LE
x86-64: word-at-a-time: improve byte count calculations
Merge runtime constants infrastructure with implementations for x86 and
arm64.
This is one of four branches that came out of me looking at profiles of
my kernel build filesystem load on my 128-core Altra arm64 system, where
pathname walking and the user copies (particularly strncpy_from_user()
for fetching the pathname from user space) is very hot.
This is a very specialized "instruction alternatives" model where the
dentry hash pointer and hash count will be constants for the lifetime of
the kernel, but the allocation are not static but done early during the
kernel boot. In order to avoid the pointer load and dynamic shift, we
just rewrite the constants in the instructions in place.
We can't use the "generic" alternative instructions infrastructure,
because different architectures do it very differently, and it's
actually simpler to just have very specific helpers, with a fallback to
the generic ("old") model of just using variables for architectures that
do not implement the runtime constant patching infrastructure.
Link: https://lore.kernel.org/all/CAHk-=widPe38fUNjUOmX11ByDckaeEo9tN4Eiyke9u1SAtu9sA@mail.gmail.com/
* runtime-constants:
arm64: add 'runtime constant' support
runtime constants: add x86 architecture support
runtime constants: add default dummy infrastructure
vfs: dcache: move hashlen_hash() from callers into d_hash()
Pull clocksource/event driver updates from Daniel Lezcano:
- Remove unnecessary local variables initialization as they will be
initialized in the code path anyway right after on the ARM arch
timer and the ARM global timer (Li kunyu)
- Fix a race condition in the interrupt leading to a deadlock on the
SH CMT driver. Note that this fix was not tested on the platform
using this timer but the fix seems reasonable enough to be picked
confidently (Niklas Söderlund)
- Increase the rating of the gic-timer and use the configured width
clocksource register on the MIPS architecture (Jiaxun Yang)
- Add the DT bindings for the TMU on the Renesas platforms (Geert
Uytterhoeven)
- Add the DT bindings for the SOPHGO SG2002 clint on RiscV (Thomas
Bonnefille)
- Add the rtl-otto timer driver along with the DT bindings for the
Realtek platform (Chris Packham)
Link: https://lore.kernel.org/all/91cd05de-4c5d-4242-a381-3b8a4fe6a2a2@linaro.org
When clone3() was introduced, it was not obvious how each architecture
deals with setting up the stack and keeping the register contents in
a fork()-like system call, so this was left for the architecture
maintainers to implement, with __ARCH_WANT_SYS_CLONE3 defined by those
that already implement it.
Five years later, we still have a few architectures left that are missing
clone3(), and the macro keeps getting in the way as it's fundamentally
different from all the other __ARCH_WANT_SYS_* macros that are meant
to provide backwards-compatibility with applications using older
syscalls that are no longer provided by default.
Address this by reversing the polarity of the macro, adding an
__ARCH_BROKEN_SYS_CLONE3 macro to all architectures that don't
already provide the syscall, and remove __ARCH_WANT_SYS_CLONE3
from all the other ones.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The smbios.c source file is not currently included in the x86 build, and
before we can do so, it needs some tweaks to build correctly in
combination with the EFI mixed mode support.
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The architectural performance monitoring V6 supports a new range of
counters' MSRs in the 19xxH address range. They include all the GP
counter MSRs, the GP control MSRs, and the fixed counter MSRs.
The step between each sibling counter is 4. Add intel_pmu_addr_offset()
to calculate the correct offset.
Add fixedctr in struct x86_pmu to store the address of the fixed counter
0. It can be used to calculate the rest of the fixed counters.
The MSR address of the fixed counter control is not changed.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-9-kan.liang@linux.intel.com
Two new fields (the unit mask2, and the equal flag) are added in the
IA32_PERFEVTSELx MSRs. They can be enumerated by the CPUID.23H.0.EBX.
Update the config_mask in x86_pmu and x86_hybrid_pmu for the true layout
of the PERFEVTSEL.
Expose the new formats into sysfs if they are available. The umask
extension reuses the same format attr name "umask" as the previous
umask. Add umask2_show to determine/display the correct format
for the current machine.
Co-developed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-8-kan.liang@linux.intel.com
From PMU's perspective, Lunar Lake and Arrow Lake are similar to the
previous generation Meteor Lake. Both are hybrid platforms, with e-core
and p-core.
The key differences include:
- The e-core supports 3 new fixed counters
- The p-core supports an updated PEBS Data Source format
- More GP counters (Updated event constraint table)
- New Architectural performance monitoring V6
(New Perfmon MSRs aliasing, umask2, eq).
- New PEBS format V6 (Counters Snapshotting group)
- New RDPMC metrics clear mode
The legacy features, the 3 new fixed counters and updated event
constraint table are enabled in this patch.
The new PEBS data source format, the architectural performance
monitoring V6, the PEBS format V6, and the new RDPMC metrics clear mode
are supported in the following patches.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-4-kan.liang@linux.intel.com
The current perf assumes that the counters that support PEBS are
contiguous. But it's not guaranteed with the new leaf 0x23 introduced.
The counters are enumerated with a counter mask. There may be holes in
the counter mask for future platforms or in a virtualization
environment.
Store the PEBS event mask rather than the maximum number of PEBS
counters in the x86 PMU structures.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-2-kan.liang@linux.intel.com
Hardware has two RMID configuration options for SNC systems. The default
mode divides RMID counters between SNC nodes. E.g. with 200 RMIDs and
two SNC nodes per L3 cache RMIDs 0..99 are used on node 0, and 100..199
on node 1. This isn't compatible with Linux resctrl usage. On this
example system a process using RMID 5 would only update monitor counters
while running on SNC node 0.
The other mode is "RMID Sharing Mode". This is enabled by clearing bit
0 of the RMID_SNC_CONFIG (0xCA0) model specific register. In this mode
the number of logical RMIDs is the number of physical RMIDs (from CPUID
leaf 0xF) divided by the number of SNC nodes per L3 cache instance. A
process can use the same RMID across different SNC nodes.
See the "Intel Resource Director Technology Architecture Specification"
for additional details.
When SNC is enabled, update the MSR when a monitor domain is marked
online. Technically this is overkill. It only needs to be done once
per L3 cache instance rather than per SNC domain. But there is no harm
in doing it more than once, and this is not in a critical path.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20240702173820.90368-3-tony.luck@intel.com
Between kexec and confidential VM support, handling the EFI memory maps
correctly on x86 is already proving to be rather difficult (as opposed
to other EFI architectures which manage to never modify the EFI memory
map to begin with)
EFI fake memory map support is essentially a development hack (for
testing new support for the 'special purpose' and 'more reliable' EFI
memory attributes) that leaked into production code. The regions marked
in this manner are not actually recognized as such by the firmware
itself or the EFI stub (and never have), and marking memory as 'more
reliable' seems rather futile if the underlying memory is just ordinary
RAM.
Marking memory as 'special purpose' in this way is also dubious, but may
be in use in production code nonetheless. However, the same should be
achievable by using the memmap= command line option with the ! operator.
EFI fake memmap support is not enabled by any of the major distros
(Debian, Fedora, SUSE, Ubuntu) and does not exist on other
architectures, so let's drop support for it.
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
objtool complains:
arch/x86/kvm/kvm.o: warning: objtool: .altinstr_replacement+0xc5: call without frame pointer save/setup
vmlinux.o: warning: objtool: .altinstr_replacement+0x2eb: call without frame pointer save/setup
Make sure %rSP is an output operand to the respective asm() statements.
The test_cc() hunk and ALT_OUTPUT_SP() courtesy of peterz. Also from him
add some helpful debugging info to the documentation.
Now on to the explanations:
tl;dr: The alternatives macros are pretty fragile.
If I do ALT_OUTPUT_SP(output) in order to be able to package in a %rsp
reference for objtool so that a stack frame gets properly generated, the
inline asm input operand with positional argument 0 in clear_page():
"0" (page)
gets "renumbered" due to the added
: "+r" (current_stack_pointer), "=D" (page)
and then gcc says:
./arch/x86/include/asm/page_64.h:53:9: error: inconsistent operand constraints in an ‘asm’
The fix is to use an explicit "D" constraint which points to a singleton
register class (gcc terminology) which ends up doing what is expected
here: the page pointer - input and output - should be in the same %rdi
register.
Other register classes have more than one register in them - example:
"r" and "=r" or "A":
‘A’
The ‘a’ and ‘d’ registers. This class is used for
instructions that return double word results in the ‘ax:dx’
register pair. Single word values will be allocated either in
‘ax’ or ‘dx’.
so using "D" and "=D" just works in this particular case.
And yes, one would say, sure, why don't you do "+D" but then:
: "+r" (current_stack_pointer), "+D" (page)
: [old] "i" (clear_page_orig), [new1] "i" (clear_page_rep), [new2] "i" (clear_page_erms),
: "cc", "memory", "rax", "rcx")
now find the Waldo^Wcomma which throws a wrench into all this.
Because that silly macro has an "input..." consume-all last macro arg
and in it, one is supposed to supply input *and* clobbers, leading to
silly syntax snafus.
Yap, they need to be cleaned up, one fine day...
Closes: https://lore.kernel.org/oe-kbuild-all/202406141648.jO9qNGLa-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Sean Christopherson <seanjc@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240625112056.GDZnqoGDXgYuWBDUwu@fat_crate.local
