Split the pps-gpio interrupt handler into a primary (hardirq) handler that
captures the PPS timestamp at interrupt entry, and a threaded handler that
processes the event. This produces the same two-part handler structure on
both PREEMPT_RT and non-RT kernels.
On non-RT kernels the threaded portion runs immediately after the primary,
with no behavioral change compared to the previous single-handler
implementation.
On PREEMPT_RT, where interrupt handlers are force-threaded by default, the
previous single-handler implementation captured the timestamp inside the
threaded portion, after IRQ-thread scheduling delay. With the split, the
timestamp is captured in true hardirq context as it is on non-RT kernels,
eliminating a significant source of PPS jitter on RT systems.
Link: https://lore.kernel.org/2e32729029fbf6977ecf04665eb00f2efd3e2c17.1780359378.git.calvin@wbinvd.org
Signed-off-by: Michael Byczkowski <by@by-online.de>
Signed-off-by: Calvin Owens <calvin@wbinvd.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Michael Byczkowski <by@by-online.de>
Tested-by: Calvin Owens <calvin@wbinvd.org>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A crafted OCFS2 image with corrupted orphan-directory extent metadata can
make umount hang.
During unmount, ocfs2_recovery_disable() waits for the
ocfs2_complete_recovery work item to finish. The worker scans the orphan
directory through ocfs2_queue_orphans() and ocfs2_dir_foreach(). If
ocfs2_read_dir_block() fails on a corrupted directory block,
ocfs2_dir_foreach_blk_el() skips the block and continues walking. On a
badly corrupted directory this can keep orphan recovery busy for a long
time, leaving umount blocked while flushing osb->ocfs2_wq.
Return the read error immediately for full directory scans and propagate
the error from ocfs2_dir_foreach(). When ocfs2_empty_dir() receives such
an error, report the directory as non-empty so unlink/rmdir does not
proceed on an unreadable directory.
Link: https://lore.kernel.org/20260702090507.446517-1-r772577952@gmail.com
Closes: https://lore.kernel.org/lkml/CANypQFbWH76Y6LWHEwAvTP7aQL04uMJ=dDyL6YDmxa3fv3Tyjg@mail.gmail.com/
Assisted-by: Codex:gpt-5.5-xhigh
Signed-off-by: Jiaming Zhang <r772577952@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A node receiving a DLM_MIG_LOCKRES message trusts several fields of the
peer-supplied dlm_migratable_lockres without validation. num_locks and
lockname_len are bounded only on the sending side, and the message is
never checked to actually carry num_locks migratable_lock entries. As a
result dlm_process_recovery_data() walks mres->ml[0..num_locks) past the
kmalloc(data_len) copy of the message (an out-of-bounds read that ends in
a BUG_ON panic), and dlm_init_lockres() copies lockname_len bytes into the
fixed 32-byte o2dlm_lockname slab object (a heap out-of-bounds write).
Both are reachable by any node in the domain.
Validate these fields right after dlm_grab(), before anything uses them --
including the not-joined error path, which already prints mres->lockname
with the unbounded lockname_len as a %.*s precision. Reject the message
unless lockname_len <= DLM_LOCKID_NAME_MAX, num_locks <=
DLM_MAX_MIGRATABLE_LOCKS (the bound the sender already asserts), and the
payload is large enough to hold the claimed locks. Conforming recovery
and migration messages are unaffected.
Link: https://lore.kernel.org/20260629-b4-disp-94fb6521-v1-2-6953bcc0421f@proton.me
Fixes: 6714d8e86b ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem")
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Heming Zhao <heming.zhao@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "ocfs2/dlm: bound peer-controlled lengths in the o2dlm".
The o2dlm receive handlers trust u8 length and count fields from the wire
without bounding them, so a node in a DLM domain can corrupt or panic any
other node with a malformed message. Three defects:
- dlm_migrate_request_handler() passes migrate->namelen unchecked to
dlm_init_mle(), which memcpy()s it into the 32-byte mname[] of an
o2dlm_mle slab object: a heap out-of-bounds write of up to ~215
attacker-controlled bytes.
- dlm_mig_lockres_handler() passes mres->lockname_len unchecked to
dlm_init_lockres(), which memcpy()s it into the 32-byte o2dlm_lockname
slab object: a heap out-of-bounds write of up to ~223 bytes.
- the same handler trusts mres->num_locks without checking that the
message is large enough to hold that many entries, so
dlm_process_recovery_data() walks mres->ml[] past the kmalloc(data_len)
copy and trips a BUG_ON (an out-of-bounds read ending in a panic).
The other o2dlm receive handlers already reject an oversized name; the
migration and recovery handlers have omitted it since the DLM was added
(see the Fixes tags). Patch 1 bounds namelen; patch 2 validates
lockname_len, num_locks, and the payload size. Conforming recovery and
migration traffic is unaffected.
o2net authenticates peers only by the DLM domain key, so any node that has
joined the domain -- including a compromised or malicious member -- can
send these messages. There is no local trigger; the attacker must already
be a member of the cluster.
Each sink was confirmed under KASAN with an out-of-tree module mirroring
it exactly -- a kmem_cache/kmalloc of the real destination size, then the
same unclamped memcpy/loop: slab-out-of-bounds Write for the two writes,
Read for the recovery walk, and a panic. A userspace AddressSanitizer
build faults identically under -m32 and -m64. Scrubbed logs are available
on request.
I reported this privately to security@kernel.org and the ocfs2 maintainers
on 2026-06-20; with no response after the standard embargo period I am
posting the fix publicly. I have no embargo requirement.
This patch (of 2):
A node receiving a DLM_MIGRATE_REQUEST message trusts the peer-supplied
name length (migrate->namelen) without bounding it. dlm_init_mle() then
copies that many bytes into the fixed DLM_LOCKID_NAME_MAX-byte mname[]
array of an o2dlm_mle slab object, so a malformed message from a cluster
peer overflows the slab object by up to ~215 bytes: a heap out-of-bounds
write of attacker-controlled data, reachable by any node in the domain.
Reject an oversized name, the way dlm_master_request_handler() and the
other o2dlm receive handlers already do; the migration handler omits the
check entirely. Conforming messages are unaffected.
Link: https://lore.kernel.org/20260629-b4-disp-94fb6521-v1-0-6953bcc0421f@proton.me
Link: https://lore.kernel.org/20260629-b4-disp-94fb6521-v1-1-6953bcc0421f@proton.me
Fixes: 6714d8e86b ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem")
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Heming Zhao <heming.zhao@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
glibc 2.42 added __attribute_const__ to sys/cdefs.h:
# define __attribute_const__ __attribute__ ((__const__))
GCC 15 warns when a macro is redefined to a different replacement list
(-Wbuiltin-macro-redefined). Since host tool Makefiles (resolve_btfids,
objtool) pass -Werror, this conflict becomes fatal.
The warning is suppressed on standard native builds because GCC treats
/usr/include as a system header path (-isystem), and macro-redefinition
warnings from system headers are silently suppressed by GCC. It fires
when glibc headers are on a regular include path (-I) instead, which
is the case in cross-compilation setups such as NixOS, where the
sysroot's glibc is passed explicitly via -I rather than -isystem.
Per (C11 6.10.3), identical replacement lists are accepted silently.
Match the glibc definition exactly, including the space before "((", so
the redefinition is accepted without warning regardless of whether
glibc headers are treated as system or non-system includes.
Link: https://lore.kernel.org/20260701200635.3992767-1-rkr0k0r@gmail.com
Signed-off-by: Joy H.J. Lee <rkr0k0r@gmail.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: David Laight <david.laight.linux@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
send_signal_locked() unconditionally copies siginfo before the namespace
translation to avoid corrupting a shared siginfo.
Not that I think this can actually hurt performance-wise, just it doesn't
look clean to me; the copy is only needed in the unlikely case when the
translation will actually change something.
Defer it to the two cases where si_pid/si_uid are rewritten, and while at
it add #ifdef's just for completeness.
Link: https://lore.kernel.org/akkaAgNfUby5_3nM@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Bradley Morgan <include@grrlz.net>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
prepare_kill_siginfo(PIDTYPE_TGID) fills si_code = SI_USER and sets
si_pid/si_uid in the sender's namespace. Then send_signal_locked()
translates si_pid/si_uid to the target's namespace.
SEND_SIG_NOINFO exists precisely for the case when si_code == SI_USER
and si_pid/si_uid are the sender's ids; this is exactly what sys_kill()
does via prepare_kill_siginfo(PIDTYPE_TGID). Change sys_kill() to use
it directly.
SEND_SIG_NOINFO produces the same result: si_code = SI_USER, and
__send_signal_locked() computes si_pid/si_uid directly in the target's
namespace. The force computation is also the same: both check if the
sender is visible in the target's pid namespace.
This is just a cleanup and microoptimization (especially with [1]),
this skips the has_si_pid_and_uid() block in send_signal_locked() and
offloads the namespace translation logic to
__send_signal_locked(SEND_SIG_NOINFO) which uses the simpler
computations.
NOTE: As a "side effect" this also fixes the kill(pid < 0, sig) case
where send_signal_locked() rewrites si_pid/si_uid in the shared
siginfo, corrupting it for subsequent recipients. But for other group
senders like __kill_pgrp_info() we still need the fix from Bradley
Morgan [1] who found this problem.
TODO: kill prepare_kill_siginfo() and change other users to use
SEND_SIG_NOINFO too. This needs trivial changes in
__send_signal_locked() and TP_STORE_SIGINFO().
Link: https://lore.kernel.org/aj6btAZqYuv59a8w@redhat.com
Link: https://lore.kernel.org/all/20260622164029.11474-1-include@grrlz.net/ [1]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Bradley Morgan <include@grrlz.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Inside parse_one(), the core parameter-parsing engine prints the address
of the parameter-set callback function using %p: pr_debug("handling %s
with %p\n", param, params[i].ops->set);
Since the string value of the parameter being parsed (val) is already
available, print the parameter name and its value instead, and avoid
tainting the kernel by exposing a kernel-ptr.
Link: https://lore.kernel.org/20260618190715.3563047-1-jim.cromie@gmail.com
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
o2nm_node_local_store() handles local=0 by stopping o2net and setting
cl_local_node to O2NM_INVALID_NODE_NUM, but it leaves cl_has_local set.
That stale state makes o2nm_this_node() return 255, blocks a later local=1
attempt with -EBUSY, and can feed 255 to heartbeat users that call
o2nm_this_node() dynamically.
Clearing cl_has_local is required when the local node is reset. But
heartbeat threads can still be running at that point. They pin the local
node config item at startup, yet o2hb_do_disk_heartbeat() and thread
teardown re-read o2nm_this_node() for the local slot and for
o2nm_undepend_this_node(). Once local=0 has cleared the live local-node
state, those dynamic reads return O2NM_MAX_NODES, which is also the
invalid node number 255.
Store the local node number in the heartbeat region when the region
starts. Use that stable node for heartbeat slot writes/checks,
negotiation messages, and the final configfs undepend. Stop the heartbeat
loop when the current local node no longer matches the stored node, and
clear cl_has_local together with cl_local_node in the local=0 path so
nodemanager state matches node removal.
Validation reproduced this kernel report:
KASAN slab-out-of-bounds in o2hb_do_disk_heartbeat+0x372/0xb30
RIP: 0010:memset+0xf/0x20
Read of size 8
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xd0/0x630
o2hb_do_disk_heartbeat+0x372/0xb30 (fs/ocfs2/cluster/heartbeat.c:1079)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x188/0x2f0
kasan_report+0xe4/0x120
o2hb_do_disk_heartbeat+0x5/0xb30 (fs/ocfs2/cluster/heartbeat.c:1079)
o2hb_thread+0x14e/0x770
kthread_affine_node+0x139/0x180
lockdep_hardirqs_on_prepare+0xda/0x190
trace_hardirqs_on+0x18/0x130
kthread+0x19d/0x1e0
ret_from_fork+0x37a/0x4d0
__switch_to+0x2d5/0x6f0
ret_from_fork_asm+0x1a/0x30
Link: https://lore.kernel.org/20260616074931.3774929-1-zzzccc427@gmail.com
Fixes: a7f6a5fb4b ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Suggested-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull misc fixes from Andrew Morton:
"13 hotfixes. All are cc:stable. 11 are for MM. All are singletons -
please see the changelogs for details"
* tag 'mm-hotfixes-stable-2026-07-27-14-18' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
fs/proc/task_mmu: fix PAGEMAP_SCAN written state for PMD holes
mm/hugetlb: fix list corruption in allocate_file_region_entries()
mm: mglru: fix stale batch updates after memcg reparenting
selftest: fix headers in fclog.c
ocfs2: fix boundary check in ocfs2_check_dir_entry() to use buffer offset
mm/percpu-km: fix bitmap overflow and accounting in pcpu_create_chunk()
mm/util: don't read __page_2 for order-1 folios in snapshot_page()
mm/hugetlb: fix swap entry corruption when clearing uffd-wp at fork()
mm: migrate_device: fix pte_pfn/pte_dirty called on non-present PTE
fs/proc/task_mmu: fix PAGEMAP_SCAN written state for unpopulated ptes
userfaultfd: wait on source PMD during UFFDIO_MOVE
lib: test_hmm: use device devt for coherent device range selection
mm/vmstat: fold stranded per-cpu node stats when a node comes online
Pull keys fixes from Jarkko Sakkinen:
- An unprivileged keyring whose keys collide through the
description-chunk path can drive assoc_array node splitting
into an out-of-bounds slot write. Fix it.
- Fix the DCP trusted keys backend
* tag 'for-next-keys-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
assoc_array: trim the final shortcut word using the current chunk end
keys: make keyring key-chunk byte order agree with keyring_diff_objects()
keys: fix out-of-bounds read in keyring_get_key_chunk()
KEYS: trusted: dcp: fix key_len validation and calc_blob_len() return type
Pull erofs fixes from Gao Xiang:
"Fix a regression in page cache sharing which can cause a NULL pointer
dereference, and limit LZMA stream memory usage on systems with many
CPUs.
- Keep a valid f_path for page cache sharing to fix a recent
mincore() NULL pointer dereference
- Limit LZMA stream pool size when too many processors are available
- Sync up with Hongbo Li's latest email address"
* tag 'erofs-for-7.2-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: cap LZMA stream pool size
erofs: ensure valid f_path for page cache sharing
MAINTAINERS: update Hongbo Li's email address
Pull pin control fixes from Linus Walleij:
"The most interesting commit is the S4 fix for AMD, which probably is
helpful to a whole bunch of important machines.
- Wakeup nits on the Qualcomm SC8280XP
- Double-free issues on the device tree parsing error path
- Fixup of the S4 sleep state handling on AMD pin control
- Missing Kconfig select REGMAP_MMIO for the Microchip driver leading
to compile stalls
- Missing Kconfig select GENERIC_PINCONF for the Bitmain BM1880
leading to compile stalls"
* tag 'pinctrl-v7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: bm1880: add missing select GENERIC_PINCONF
pinctrl-amd: Don't clear S4 wake bits at probe
pinctrl: microchip-sgpio: add missing select REGMAP_MMIO
pinctrl: devicetree: don't free uninitialized dev_name on error path
pinctrl: qcom: sc8280xp: Add missing wakeup entries for GPIO143/151
pinctrl: qcom: Unconditionally mark gpio as wakeup enable
fs/erofs/decompressor_lzma.c sizes the module-global MicroLZMA stream
pool from num_possible_cpus() when the lzma_streams module parameter is
unset, then z_erofs_load_lzma_config() preallocates one image-supplied
dictionary per stream, accepting dictionaries up to 8 MiB. On high-CPU
systems, a small EROFS image can pin hundreds of MiB of vmalloc-backed
decoder state until the erofs module is unloaded.
Impact: An EROFS image mounted by the system can pin up to 8 MiB of
vmalloc memory per LZMA stream, either as intended or unexpectedly.
Bound the default stream count by a new
CONFIG_EROFS_FS_ZIP_LZMA_DEFAULT_MAX_STREAMS option, default 16, so the
worst-case default preallocation is 128 MiB if the number of CPUs is no
less than 16 while preserving the existing per-image dictionary limit.
An explicit lzma_streams module parameter is still honoured as-is, so
administrators who deliberately size the pool are not affected.
Fixes: 622ceaddb7 ("erofs: lzma compression support")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Previously, backing files for page cache sharing were set up with
f_path left as NULL (only f_inode was valid). It worked, but a recent
mincore fix relies on f_path.mnt and crashes (found by "erofs/028" on
7.2-rc4):
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP PTI
CPU: 3 UID: 0 PID: 675528 Comm: fincore Not tainted 7.2.0-rc4-00002-g[]-dirty #1 PREEMPT(lazy)
Hardware name: Red Hat KVM, BIOS 1.16.0-4.al8 04/01/2014
RIP: 0010:__do_sys_mincore+0xc0/0x2c0
...
Specify valid paths using valid disconnected dentries together with
erofs_ishare_mnt instead of leaving f_path empty, so they are more
like real backing files in a pseudo filesystem and standard
backing_file_open() can be used directly.
Fixes: e187bc02f8 ("mm: do file ownership checks with the proper mount idmap")
Acked-by: Hongbo Li <hongbohbli@tencent.com>
Signed-off-by: Gao Xiang <xiang@kernel.org>
Pull vfs fixes from Christian Brauner:
- vfs: Preserve the ACL_DONT_CACHE state in forget_cached_acl().
ACL_DONT_CACHE is meant to be a permanent opt-out from ACL caching
which FUSE relies on for servers that don't negotiate FUSE_POSIX_ACL.
The helper replaced it with ACL_NOT_CACHED, silently re-enabling the
cache, and as fuse doesn't invalidate the cache for such servers a
properly timed get_acl() returned stale ACLs. Comes with a fuse
selftest reproducing this.
- pidfs:
- Preserve PIDFD_THREAD when a thread pidfd is reopened via
open_by_handle_at(). PIDFD_THREAD shares the O_EXCL bit which
do_dentry_open() strips after the flags have been validated, so
the reopened pidfd silently became a process pidfd. Comes with a
selftest.
- Add a pidfs_dentry_open() helper so the regular pidfd allocation
path and the file handle path share the code that forces O_RDWR
and reapplies the pidfd flags that do_dentry_open() strips.
- Handle FS_IOC32_GETVERSION in the compat ioctl path.
- Make pidfs_ino_lock static.
- iomap:
- Fix the block range calculation in ifs_clear_range_dirty() so a
partial clear doesn't drop the dirty state of blocks the range
only partially covers.
- Support invalidating partial folios so a partial truncate or hole
punch with blocksize < foliosize doesn't leave stale dirty bits
behind.
- Only set did_zero when iomap_zero_iter() actually zeroed
something.
- Guard ifs_set_range_dirty() and ifs_set_range_uptodate() against
zero-length ranges where the unsigned last-block calculation
underflows and bitmap_set() writes far beyond the ifs->state
allocation.
- Don't merge ioends with different io_private values as the merge
could leak or corrupt the private data of the individual ioends.
- exec:
- Raise bprm->have_execfd only once the binfmt_misc interpreter has
actually been opened. The flag was set as soon as a matching 'O'
or 'C' entry was found. If the interpreter open failed with
ENOEXEC the exec fell through to the next binary format with
have_execfd raised but no executable staged and begin_new_exec()
NULL derefed past the point of no return.
- Fix an unsigned loop counter wrap in transfer_args_to_stack() on
nommu. An overlong argument or environment string pushes bprm->p
below PAGE_SIZE, the stop index becomes zero, and the loop never
terminates, wrapping its counter and copying garbage from in
front of the page array into the new process stack.
- Make binfmt_elf_fdpic only honour the first PT_INTERP like
binfmt_elf does. Each additional PT_INTERP overwrote the previous
interpreter, leaking the name allocation and the interpreter file
reference together with the write denial open_exec() took,
leaving the file unwritable for as long as the system runs.
- overlayfs:
- Compare the full escaped xattr prefix including the trailing dot.
An xattr like "trusted.overlay.overlayfoo" was misclassified as
an escaped overlay xattr.
- Check read access to the copy_file_range() source with the
source's mounter credentials.
- super: Thawing a filesystem whose block device was frozen with
bdev_freeze() deadlocked. Dropping the last block layer freeze
reference from under s_umount ends up in fs_bdev_thaw() which
reacquires s_umount on the same task. Pin the superblock with an
active reference instead and call bdev_thaw() without holding
s_umount.
- procfs: Return EACCES instead of success when the ptrace access check
for namespace links fails.
- afs: Use afs_dir_get_block() rather than afs_dir_find_block() for
block 0 in afs_edit_dir_remove(), matching afs_edit_dir_add().
- Push the memcg gating of ->nr_cached_objects() down into the btrfs
and shmem callbacks instead of skipping every callback during
non-root memcg reclaim. The blanket check short-circuited XFS whose
inode reclaim hook is intentionally driven from per-memcg contexts to
free memcg-charged slab.
- eventpoll: Pin files while checking reverse paths.
Since struct file became SLAB_TYPESAFE_BY_RCU a concurrent close
could free and recycle the file under the check which then took and
dropped the f_lock of whatever live file now occupies that slot.
* tag 'vfs-7.2-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (24 commits)
super: fix emergency thaw deadlock on frozen block devices
pidfs: make pidfs_ino_lock static
eventpoll: pin files while checking reverse paths
fs: push nr_cached_objects memcg gating into individual filesystems
afs: Fix afs_edit_dir_remove() to get, not find, block 0
iomap: prevent ioend merge when io_private differs
iomap: add comments for ifs_clear/set_range_dirty()
iomap: fix out-of-bounds bitmap_set() with zero-length range
iomap: fix incorrect did_zero setting in iomap_zero_iter()
iomap: support invalidating partial folios
iomap: correct the range of a partial dirty clear
fs/super: fix emergency thaw double-unlock of s_umount
pidfs: handle FS_IOC32_GETVERSION in compat ioctl
ovl: check access to copy_file_range source with src mounter creds
proc: Fix broken error paths for namespace links
pidfs: add pidfs_dentry_open() helper
selftests/pidfd: check PIDFD_THREAD survives open_by_handle_at()
pidfs: preserve thread pidfds reopened by file handle
ovl: fix trusted xattr escape prefix matching
selftests/fuse: add ACL_DONT_CACHE regression test
...
Pull spi fixes from Mark Brown:
"Just a couple of small bits for the SpacemiT driver - one small fix,
and a new compatible in the DT binding"
* tag 'spi-fix-v7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dt-bindings: spacemit: add K3 SPI compatible
spi: spacemit: Correct TX FIFO slot calculation
Pull regulator fixes from Mark Brown:
"One driver specific fix where one of the MediaTek drivers duplicated
some core code buggily, and a core fix for an ordering issue on
startup where we could end up configuring a voltage outside of
constraints due to the order in which we applied constraints"
* tag 'regulator-fix-v7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: clamp voltage constraints before applying apply_uV
regulator: mt6358: use regmap helper to read fixed LDO calibration
Pull char/misc driver fixes from Greg KH:
"Here are a number of small char/misc/etc driver fixes for 7.2-rc5 that
resolve a bunch of different reported issues. Included in here are:
- rust_binder error message reporting fix
- stratix10-svc firmware driver fixes
- mei driver fix
- intel_th hardware tracing driver fix
- comedi driver fix
- uio_hv_generic driver fix
- ntsync selftest fix
- nsm misc driver fix
- some MAINTAINER file updates
All of these have been in linux-next for over a week with no reported
issues"
* tag 'char-misc-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
MAINTAINERS: Update wine-devel list address
rust_binder: only print failure if error has source
intel_th: fix MSC output device reference leak
misc: nsm: pin the module while the device is open
mei: bus: access mei_device under device_lock on cleanup
misc: nsm: only unlock nsm_dev on post-lock error paths
selftests: ntsync: correct CONFIG_NTSYNC name
comedi: comedi_parport: deal with premature interrupt
uio_hv_generic: Bind to FCopy device by default
MAINTAINERS: Add Greg Kroah-Hartman to GPIB
firmware: stratix10-svc: fix teardown order in remove to prevent race
firmware: stratix10-svc: handle NO_RESPONSE in async poll
firmware: stratix10-svc: fix FCS SMC call kernel-doc
firmware: stratix10-svc: fix memory leaks and list corruption bugs
Pull staging driver fixes from Greg KH:
"Here are two small staging driver fixes for 7.2-rc5. They both resolve
some reported bugs in the rtl8723bs staging driver and have been in
linux-next for over a week with no reported issues"
* tag 'staging-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: fix OOB reads in rtw_get_wps_ie()
staging: rtl8723bs: fix inverted HT40 secondary channel offset
Pull serial driver fixes from Greg KH:
"Here are two small serial driver fixes for 7.2-rc5. They are:
- sc16is7xx get_direction() callback fix, which resolves a
user-triggerable warning in the driver
- NULL pointer dereference on some platforms using the 8250_mid
serial driver
Both have been in linux-next for over a week with no reported issues"
* tag 'tty-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: sc16is7xx: implement gpio get_direction() callback
serial: 8250_mid: Fix NULL function pointer dereference on DNV/ICX-D/SNR platforms
Pull USB fixes from Greg KH:
"Here are some small USB fixes and new device quirks and ids:
- usb storage quirk added
- new usb serial device ids added
- usb-serial device name leak and other bug fixes
- small xhci driver fixes
- normal batch of typec driver fixes for reported issues
- usb-atm much-reported-by-syzbot fix for firmware download races
- sysfs BOS device removal race fix
- lots of usb gadget driver fixes for reported issues
- other small USB driver fixes for other reported problems
All of these have been in linux-next this past week, many of them much
longer"
* tag 'usb-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (30 commits)
usb: typec: ucsi: Correct teardown ordering in ucsi_init() error path
USB: serial: io_edgeport: cap received transmit credits
USB: serial: option: add TDTECH MT5710-CN
USB: serial: io_ti: reject oversized boot-mode firmware
USB: serial: mxuport: validate firmware header size
usb: atm: ueagle-atm: reject descriptors that confuse probe and disconnect
usb: typec: ucsi: yoga_c630: Remove redundant duplicate altmode handling
usb: typec: ucsi: Add duplicate detection to nvidia registration path
usb: typec: ucsi: Detect and skip duplicate altmodes from buggy firmware
usb: gadget: dummy_hcd: prevent fifo_req reuse during giveback
usb: chipidea: fix usage_count leak when autosuspend_delay is negative
usb: core: sysfs: add lock to bos_descriptors_read()
usb: musb: omap2430: Do not put borrowed of_node in probe
usb: core: port: Deattach Type-C connector on component unbind
USB: storage: add NO_ATA_1X quirk for Longmai USB Key
USB: serial: ftdi_sio: add support for E+H FXA291
USB: serial: keyspan_pda: fix data loss on receive throttling
usb: gadget: printer: fix infinite loop in printer_read()
usb: gadget: f_midi: cancel pending IN work before freeing the midi object
usb: gadget: udc: bdc: free IRQ and drain func_wake_notify before teardown
...
Pull tracing fixes from Steven Rostedt:
- Move rb_desc->nr_page_va before updating dynamic array
The rb_descr->page_va is a dynamic array counted by nr_page_va. But
the updating of the page_va[] is done before the nr_page_va is
incremented causing a build with CONFIG_UBSAN_BOUNDS to flag it as an
overflow.
Move the increment of the counted by value before the array element
is updated.
- Propagate errors from remote event bulk updates
The return value of trace_remote_enable_event() was not being checked
by remote_events_dir_enable_write() where it would silently fail.
Have it check the return value and propagate that back up to user
space.
- Fix resource leak on mmiotrace trace_pipe close
The mmiotrace tracer was created in 2008 before the trace_pipe had a
close callback to allow tracers to do clean up from trace_pipe open.
The trace_pipe close cleanup callback was added in 2009 but the
mmiotrace tracer was not updated. It had a hack to do the cleanup in
the read call, where it may leak if user space did not read the
entire buffer.
Add a callback to mmiotrace trace_pipe close do to the cleanup
properly.
- Fix a possible NULL pointer dereference in the mmiotrace tracer
If the mmio_pipe_open() fails to find a PCI device, it will set the
hiter->dev pointer to NULL. The read function will blindly
dereference that pointer. Fix the read call to check to see if that
pointer is populated before dereferencing it.
- Fix union collision of module and refcnt for dynamic events
In 'struct trace_event_call', the 'module' pointer and the 'refcnt'
atomic variable share the same memory space in a union. The filter on
module logic only checked if the 'module' was set to determine if the
event belonged to the module. As dynamic events are always builtin,
it doesn't need the 'module' field of the structure and used a
refcount. But the module filtering logic would then mistaken these
dynamic events as a module and call module_name(event->module) on it.
Add a check to see if the event is a dynamic event and if so, do not
check it for being part of the given module.
- Reset the top level buffer in selftests before running instances
The ftracetest selftest initializes each instance before executing
the tests. But it does not reset the top level buffer. Dynamic events
are only added and removed by the top level so any left over dynamic
events will not be removed by the reset in the instances.
Left over dynamic events can cause the tests to incorrectly fail.
Reset the top level buffer before running the instances.
- Make the context_switch counter 64 bit
The code to read user space for a system call trace event or for a
trace_marker will disable migration, enable preemption, read user
space into a per CPU buffer, disable preemption and enable migration
again. It checks if the per CPU context switch counter to see if it
changed, and if it did not, it would know that the per CPU buffer was
not touched by another task.
But the save counter was 32 bit and it would compare it to the 64 bit
context_switch variable. A long running system could have the
context_switch variable greater that 1<<32 in which case the compare
will always fail. The compare will promote the 32 bit int saved value
to 64 bit and compare it to the full 64 bit counter. Since the top 32
bits of the saved value was zero, it would never match.
- Fix a use-after-free of the event_enable trigger
The event_enable trigger allows for enabling one event when another
event is triggered. When the trigger is removed, it must go through a
synchronization phase to make sure it is not triggered again. The
trigger itself is delayed by the "bulk delay" logic that was recently
added. But the code that frees the event_enable data used to rely on
the trigger code to do the synchronization. Now that the code uses
the call RCU functions (and a workqueue), that delay no longer is
there.
Add a callback private_data_free() function that allows triggers to
clean up data after the synchronization phase has completed.
- Move the module_ref counter into the delay callback
Since an event of the event_enable trigger can enable an event for a
module, it ups the module ref count for that event's module. This
prevents the event from trying to enable an event that no longer
exists and cause a use-after-free bug.
The ref counter was set back down when the trigger was removed but
not after thy synchronization phase. This could lead to the module
data being accessed after module was unloaded.
Move the module ref decrement into the private_data_free() callback
of the event_enable trigger.
- Add mutex to protect parser in ftrace filtering
The set_ftrace_filter file uses a parsing descriptor that is
allocated at open and modified by writes. If multiple threads were to
write to the descriptor at the same time, it can corrupt the parser.
Add a mutex around the modifications of the parser descriptor.
- Fix possible corruption in perf syscall tracing
The perf system call trace events can now read user space. To do so,
the reads of user space enable preemption and disables it again.
During this time that preemption is enabled, the task can migrate.
The perf event list head is assigned via a per CPU pointer. It is
done before the user space part is called. If the user space reading
migrates the task to another CPU, then the head pointer is no longer
valid.
Re-assign the head pointer after the reading of user space to keep it
using the correct data.
* tag 'trace-v7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: perf: Fix stale head for perf syscall tracing
ftrace: Add global mutex to serialize trace_parser access
tracing: Delay module ref count for "enable_event" trigger
tracing: Fix use-after-free freeing trigger private data
tracing: Fix context switch counter truncation
selftests/ftrace: Reset triggers at top level before instance loop
tracing: Fix union collision of module and refcnt for dynamic events
tracing: Fix mmiotrace possible NULL dereferencing of hiter->dev
tracing: Fix resource leak on mmiotrace trace_pipe close
tracing: Propagate errors from remote event bulk updates
tracing/remotes: Fix page_va[] access before counter update in trace_remote_alloc_buffer()
Pull m68knommu fix from Greg Ungerer:
- fix broken local SoC IO accesses for ColdFire
* tag 'm68knommu-fixes-on-top-off-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: coldfire: fix breakage of missed IO access update
Pull x86 fix from Ingo Molnar:
- Disable jump/lookup tables in the x86 boot decompressor code
a bit more widely, because newer versions of LLVM started
optimizing it a bit better and introduced run-time relocations
in PIE code (Nathan Chancellor)
* tag 'x86-urgent-2026-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/compressed: Disable jump tables
do_thaw_all_callback() calls bdev_thaw() while holding sb->s_umount
exclusively. If the block device was frozen via bdev_freeze() dropping
the last block layer freeze reference calls fs_bdev_thaw() which
reacquires s_umount:
do_thaw_all_callback(sb)
super_lock_excl(sb) # holds sb->s_umount
bdev_thaw(sb->s_bdev)
mutex_lock(&bdev->bd_fsfreeze_mutex)
# bd_fsfreeze_count drops 1 -> 0
bd_holder_ops->thaw == fs_bdev_thaw
get_bdev_super(bdev)
bdev_super_lock(bdev, true)
super_lock(sb, true)
down_write(&sb->s_umount) # same task: deadlock
The emergency thaw worker deadlocks against itself holding both
s_umount and bd_fsfreeze_mutex. That fscks any subsequent unmount,
freeze, or thaw of that filesystem and block device.
[ 81.878470] sysrq: Show Blocked State
[ 81.880140] task:kworker/0:1 state:D stack:0 pid:11 tgid:11 ppid:2 task_flags:0x4208060 flags:0x00080000
[ 81.884876] Workqueue: events do_thaw_all
[ 81.886656] Call Trace:
[ 81.887759] <TASK>
[ 81.888763] __schedule+0x579/0x1420
[ 81.890372] schedule+0x3a/0x100
[ 81.891794] schedule_preempt_disabled+0x15/0x30
[ 81.893848] rwsem_down_write_slowpath+0x1ea/0x900
[ 81.895191] ? __pfx_do_thaw_all_callback+0x10/0x10
[ 81.896528] down_write+0xbd/0xc0
[ 81.897505] super_lock+0x91/0x180
[ 81.898457] ? __mutex_lock+0xa99/0x1140
[ 81.900748] ? __mutex_unlock_slowpath+0x1f/0x400
[ 81.902069] bdev_super_lock+0x5b/0x150
[ 81.903132] get_bdev_super+0x10/0x60
[ 81.904042] fs_bdev_thaw+0x23/0xf0
[ 81.904755] bdev_thaw+0x82/0x100
[ 81.905484] do_thaw_all_callback+0x2c/0x50
[ 81.906298] __iterate_supers+0x5d/0x130
[ 81.907067] do_thaw_all+0x20/0x40
[ 81.907739] process_one_work+0x206/0x5e0
[ 81.908545] worker_thread+0x1e2/0x3c0
[ 81.909339] ? __pfx_worker_thread+0x10/0x10
[ 81.910171] kthread+0xf4/0x130
[ 81.910799] ? __pfx_kthread+0x10/0x10
[ 81.911528] ret_from_fork+0x2e2/0x3b0
[ 81.912259] ? __pfx_kthread+0x10/0x10
[ 81.913010] ret_from_fork_asm+0x1a/0x30
[ 81.913806] </TASK>
bdev_super_lock() even documents the violated requirement with
lockdep_assert_not_held(&sb->s_umount).
Acquiring bd_fsfreeze_mutex under s_umount also inverts the
bd_fsfreeze_mutex vs. s_umount ordering established by
bdev_{freeze,thaw}() and can thus ABBA against a concurrent block-layer
freeze even when the recursive path isn't hit.
Fix this by not holding s_umount around the bdev_thaw() loop at all. Pin
the superblock with an active reference instead as
filesystems_freeze_callback() does. The active reference keeps the
superblock from being shut down and so ->s_bdev stays valid without
holding s_umount. The block-layer-held freeze is dropped by
fs_bdev_thaw() with FREEZE_MAY_NEST | FREEZE_HOLDER_USERSPACE exactly as
a regular unfreeze would and thaw_super_locked() handles
filesystem-level freezes as before.
The emergency thaw path has deadlocked like this in one form or
another for a long long time but the current exclusively-held
shape dates back to commit [1] where thaw_bdev() already ended in
thaw_super() with s_umount held by do_thaw_all_callback().
Fixes: 08fdc8a013 ("buffer.c: call thaw_super during emergency thaw") [1]
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260723-work-super-emergency_thaw-v1-1-7c315c600245@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- 'zerocopy' crates: update to v0.8.54 to fix a modpost error under
'CONFIG_CC_OPTIMIZE_FOR_SIZE=y'.
There are actually two updates in the PR: the one to v0.8.52 is
fairly large and was originally not intended for a fixes PR, but the
actual fix landed in the v0.8.54 one. Thus I included both here.
The v0.8.52 update includes two things upstream added for us:
'--cfg no_fp_fmt_parse' to avoid a local workaround, and the new
'most_traits' feature.
The good news is that, after these updates, the delta with upstream
is now trivial: only an identifier prefix change and the SPDX
parentheses.
- Fix an objtool warning by adding one more 'noreturn' function for
Rust 1.99.0 (expected 2026-10-01).
- Clean up new 'semicolon_in_expressions_from_macros' lint errors for
Rust 1.99.0 (expected 2026-10-01). The lint can be allowed, but it
will be a hard error at some point in the future anyway, so clean it
up now.
- Locally allow new 'suspicious_runtime_symbol_definitions' lint for
Rust 1.98.0 (expected 2026-08-20).
- Globally allow 'clippy::unwrap_or_default' lint since it relies on
optimizations -- under 'CONFIG_CC_OPTIMIZE_FOR_SIZE=y' it does not
work well.
'kernel' crate:
- 'time' module: fix 'Delta::as_micros_ceil()' to round negative values
correctly"
* tag 'rust-fixes-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: time: fix as_micros_ceil() to round correctly for negative Delta
rust: device: avoid trailing ; in printing macros
objtool/rust: add one more `noreturn` Rust function for Rust 1.99.0
rust: zerocopy: update to v0.8.54
rust: zerocopy: update to v0.8.52
rust: allow `clippy::unwrap_or_default` globally
rust: allow `suspicious_runtime_symbol_definitions` lint for Rust >= 1.98
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Update header copies of kernel headers, including const.h, fs.h,
perf_event.h, gfp_types.h, kvm.h, cpufeatures.h, rtnetlink.hp,
msr-index.h, drm.h and socket.h
- Add some build files related to BPF skels to .gitignore
* tag 'perf-tools-fixes-for-v7.2-1-2026-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
tools headers: Sync KVM headers with the kernel sources
tools headers: Sync UAPI linux/fs.h with the kernel sources
perf beauty: Update copy of linux/socket.h with the kernel sources
tools headers: Sync UAPI drm/drm.h with kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers x86 cpufeatures: Sync with the kernel sources
tools headers: Sync linux/gfp_types.h with the kernel sources
tools headers UAPI: Sync linux/rtnetlink.h with the kernel sources
tools headers UAPI: Sync linux/const.h with the kernel sources
perf bench bpf: Add missing .gitignore file
Pull firewire fix from Takashi Sakamoto:
"Fix a bug in unit driver for RFC 2734 IPv4 over IEEE 1394.
The driver failed to reassemble a complete datagram when it was stored
across multiple buffer ranges in the list. Ruoyu Wang reported and
fixed it"
* tag 'firewire-fixes-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: net: Fix fragmented datagram reassembly
Pull LoongArch fixes from Huacai Chen:
- fix build warnings and errors
- move jump_label_init() before parse_early_param()
- retrieve CPU package ID from PPTT when available
- fix some bugs kgdb, BPF JIT and laptop platform driver bugs
* tag 'loongarch-fixes-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
platform/loongarch: laptop: Explicitly reset bl_powered state when suspend
platform/loongarch: laptop: Stop setting acpi_device_class()
LoongArch: BPF: Fix memory leak in bpf_jit_free()
LoongArch: BPF: Zero-extend signed ALU32 div/mod results
LoongArch: Fix oops during single-step debugging
LoongArch: Fix address space mismatch in kexec command line lookup
LoongArch: Retrieve CPU package ID from PPTT when available
LoongArch: Move jump_label_init() before parse_early_param()
LoongArch: Fix build errors due to wrong instructions for 32BIT
LoongArch: Increase TASK_STRUCT_OFFSET up to 2040 for 32BIT
drivers/pinctrl/pinctrl-bm1880.c initialises its pinconf_ops with
.is_generic = true, but that field is only present when
CONFIG_GENERIC_PINCONF is enabled (guarded by #ifdef in pinconf.h).
The Kconfig entry for PINCTRL_BM1880 never selects GENERIC_PINCONF,
so any config that enables CONFIG_PINCTRL_BM1880=y without
CONFIG_GENERIC_PINCONF=y fails to compile:
drivers/pinctrl/pinctrl-bm1880.c:1288:10: error: 'const struct pinconf_ops' has no member named 'is_generic'
Found by randconfig testing on arm64; tinyconfig reproducer below.
Add the missing select to fix the build.
Fixes: 49bd61ebce ("pinctrl: Add pinconf support for BM1880 SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Boortz <bennib@mailbox.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
commit 6bc3462a0f ("pinctrl: amd: Mask wake bits on probe again")
introduced a regression where Wake-on-LAN no longer works after suspend
or shutdown on some AMD platforms.
Firmware-programmed S4 wake bits for devices like PCIe NICs using PCI
PME are cleared at probe, but nothing restores them. Unlike S0i3/S3 wake
sources that use enable_irq_wake() -> amd_gpio_irq_set_wake(), PCIe PME
does not use GPIO IRQ infrastructure and relies on firmware configuration.
The original intent of commit 6bc3462a0f ("pinctrl: amd: Mask wake
bits on probe again") was to clear spurious wake bits left by firmware
to prevent unwanted wakeups. However, S4 wake bits are used for
hardware-level wake sources like WoL that bypass the kernel's IRQ wake
API.
Fix by preserving S4 wake bits at probe and only clearing S0i3/S3 bits:
- Firmware-configured S4 wake sources (WoL) continue working
- Kernel maintains control of S3/S0i3 wake policy via set_wake()
- S3-only wake sources work correctly per commit f31f33dbb3 ("pinctrl:
amd: Take suspend type into consideration which pins are non-wake")
The trade-off is that firmware-programmed spurious S4 wake bits remain
set, but this is less problematic than breaking WoL.
Fixes: 6bc3462a0f ("pinctrl: amd: Mask wake bits on probe again")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The driver calls ocelot_regmap_from_resource() via <linux/mfd/ocelot.h>,
which internally uses devm_regmap_init_mmio() and requires REGMAP_MMIO.
The Kconfig entry does not select REGMAP_MMIO, causing a build failure
when no other driver in the config happens to pull in REGMAP_MMIO:
include/linux/mfd/ocelot.h:34:24: error: implicit declaration of function 'devm_regmap_init_mmio'
Found by randconfig testing on arm64; tinyconfig reproducer below.
Fixes: 2afbbab45c ("pinctrl: microchip-sgpio: update to support regmap")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Boortz <bennib@mailbox.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
dt_remember_or_free_map() duplicates dev_name for each map entry. If
kstrdup_const() fails, dt_free_map() frees dev_name in all num_maps
entries, including entries that have not been initialized.
Some pinctrl drivers, including pinctrl-imx, allocate the map with
kmalloc() and leave dev_name for the core to initialize. The untouched
entries therefore contain uninitialized data which is passed to
kfree_const().
Reproduced on qemu's mcimx6ul-evk (pinctrl-imx) with failslab injection
while binding the pinctrl-consuming device, under KASAN:
BUG: KASAN: double-free in dt_free_map+0x34/0xa4
Free of addr c425a900 by task init/1
kfree from dt_free_map+0x34/0xa4
dt_free_map from dt_remember_or_free_map+0x184/0x198
dt_remember_or_free_map from pinctrl_dt_to_map+0x33c/0x4c8
pinctrl_dt_to_map from create_pinctrl+0x9c/0x5c0
Initialize all dev_name fields to NULL before duplicating the device
name, making the full-map cleanup safe after a partial failure.
Fixes: be4c60b563 ("pinctrl: devicetree: Avoid taking direct reference to device name string")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-fable-5
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Pull block fixes from Jens Axboe:
- Fix a ublk recovery hang, where END_USER_RECOVERY without a
successful START_USER_RECOVERY could be satisfied by a stale
completion latch
- Fix a stack out-of-bounds read in the CDROMVOLCTRL ioctl
- MAINTAINERS email address update for Roger Pau Monne
* tag 'block-7.2-20260724' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
MAINTAINERS: update my email address
cdrom: fix stack out-of-bounds read in CDROMVOLCTRL
ublk: wait on ublk_dev_ready() instead of ub->completion
Pull io_uring fixes from Jens Axboe:
- Fix a missing ERESTARTSYS conversion in the read paths, which got
messed up back when some code consolidation was done for read
multishot support
- zcrx UAPI rename, dropping the abbreviated "notif" naming in favor of
"event" for consistency and to be less ambiguous for users. This was
added for 7.2, so let's rename it while we still can. No functional
or code changes, just a strict rename
* tag 'io_uring-7.2-20260724' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/zcrx: rename notif to event
io_uring/zcrx: rename ZCRX_NOTIF_NO_BUFFERS
io_uring/zcrx: drop "notif" from stats struct names
io_uring/rw: fix missing ERESTARTSYS conversion in read paths
In ftrace, the trace_parser structure is allocated and initialized when
a trace file is opened, and is subsequently used across write and release
handlers to parse user input.
The affected handler paths and their specific functions are:
- Open paths: ftrace_regex_open(), ftrace_graph_open()
- Write paths: ftrace_regex_write(), ftrace_graph_write()
- Release paths: ftrace_regex_release(), ftrace_graph_release()
If userspace opens a trace file descriptor and shares it across multiple
threads, concurrent write calls will race on the parser's internal state,
specifically the 'idx', 'cont', and 'buffer' fields, leading to corrupted
input or undefined behavior.
Fix this by adding a global mutex, parser_lock, to serialize all access
to trace_parser across write and release paths, preventing concurrent
corruption of parser state.
Fixes: e704eff3ff ("ftrace: Have set_graph_function handle multiple functions in one write")
Fixes: 689fd8b65d ("tracing: trace parser support for function and graph")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260725024721.1983675-1-wutengda@huaweicloud.com
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull smb server fixes from Steve French:
"This contains eight ksmbd fixes covering POSIX ACL handling, SMB
signing enforcement, DACL parsing and construction hardening, session
lifetime handling, and validation of malformed transform and
compressed SMB2 requests:
- preserve inherited POSIX ACL mask when creating objects.
- enforce the session signing requirement for plaintext SMB requests.
- harden DACL/ACE processing against size overflows, incomplete ACE
copies, and undersized SIDs.
- defer teardown of a previous session until NTLM authentication
succeeds.
- reject undersized encryption-transform and decompressed SMB2
requests before they can reach normal SMB2 request processing"
* tag 'v7.2-rc4-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: reject undersized decompressed SMB2 requests
ksmbd: validate minimum PDU size for transform requests
ksmbd: defer destroy_previous_session() until after NTLM authentication
ksmbd: validate ACE size against SID sub-authorities
ksmbd: restore DACL size on check_add_overflow() to avoid malformed ACL
ksmbd: bound DACL dedup walk to copied ACEs
ksmbd: enforce signing required by the session
ksmbd: preserve VFS inherited POSIX ACL mask
