Currently IRQ_EFFECTIVE_AFF_MASK is enabled for ARM_GIC and ARM_GIC3, so it
only allows a single target CPU in the affinity mask to process interrupts
and also interrupt thread, and the performance of using threaded irq is
almost the same as tasklet. But if the config is not enabled, the interrupt
thread will be allowed all the CPUs in the affinity mask. At that situation
it improves the performance (about 20%).
Note: IRQ_EFFECTIVE_AFF_MASK is configured differently for different
architecture chip, and it seems to be better to make it be configured
easily.
Link: https://lore.kernel.org/r/1579522957-4393-2-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch has two major non-functionality changes:
1. Take scanning host if-statement out from ufshcd_probe_hba(), and move
into a new added function ufshcd_add_lus(). In this new function
ufshcd_add_lus(), the main functionalitis include: ICC initialization, add
well-known LUs, devfreq initialization, UFS bsg probe and scsi host
scan. The reason for this change is that these functionalities only being
called during booting stage flow ufshcd_init()->ufshcd_async_scan(). In the
processes of error handling and power management ufshcd_suspend(),
ufshcd_resume(), ufshcd_probe_hba() being called, but these functionalitis
above metioned are not hit.
2. Move context of initialization of parameters associated with the UFS
device to a new added function ufshcd_device_params_init(). The reason of
this change is that all of these parameters are used by driver, but only
need to be initialized once when booting. Combine them into an integral
function, make them easier maintain.
Link: https://lore.kernel.org/r/20200120130820.1737-4-huobean@gmail.com
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
IOCTLs causing firmware fault may end up in failed controller resets and
finally killing the adapter.
This patch fixes this problem as stated below:
In OCR sequence, driver will attempt refiring pended IOCTLs upto two times.
If first two attempts fail, then in third attempt driver will return pended
IOCTLs with EBUSY status to application. These changes are done to ensure
if any of pended IOCTLs is causing firmware fault and resulting into OCR
failure, then in last attempt of OCR driver will refrain firing it to
firmware and saving adapter from being killed due to faulty IOCTL.
Link: https://lore.kernel.org/r/1579000882-20246-10-git-send-email-anand.lodnoor@broadcom.com
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Anand Lodnoor <anand.lodnoor@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If the transport cannot be registered, the session/connection creation
needs to be failed early to let the initiator know. Otherwise, the system
will have an outstanding connection that cannot be used nor removed by
open-iscsi. The result is similar to the error below, triggered by
injecting a failure in the transport's registration path.
openiscsi reports success:
root@debian-vm:~# iscsiadm -m node -T iqn:lun1 -p 127.0.0.1 -l
Logging in to [iface: default, target: iqn:lun1, portal: 127.0.0.1,3260]
Login to [iface: default, target: iqn:lun1, portal:127.0.0.1,3260] successful.
But cannot remove the session afterwards, since the kernel is in an
inconsistent state.
root@debian-vm:~# iscsiadm -m node -T iqn:lun1 -p 127.0.0.1 -u
iscsiadm: No matching sessions found
Link: https://lore.kernel.org/r/20200106185817.640331-4-krisman@collabora.com
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
attribute_container_device_trigger invokes callbacks that may fail for one
or more classdevs, for instance, the transport_add_class_device callback,
called during transport creation, does memory allocation. This
information, though, is not propagated to upper layers, and any driver
using the attribute_container_device_trigger API will not know whether any,
some, or all callbacks succeeded.
This patch implements a safe version of this dispatcher, to either succeed
all the callbacks or revert to the original state.
Link: https://lore.kernel.org/r/20200106185817.640331-2-krisman@collabora.com
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull compat_ioctl cleanup from Arnd. Here's his description:
This series concludes the work I did for linux-5.5 on the compat_ioctl()
cleanup, killing off fs/compat_ioctl.c and block/compat_ioctl.c by moving
everything into drivers.
Overall this would be a reduction both in complexity and line count, but
as I'm also adding documentation the overall number of lines increases
in the end.
My plan was originally to keep the SCSI and block parts separate.
This did not work easily because of interdependencies: I cannot
do the final SCSI cleanup in a good way without first addressing the
CDROM ioctls, so this is one series that I hope could be merged through
either the block or the scsi git trees, or possibly both if you can
pull in the same branch.
The series comes in these steps:
1. clean up the sg v3 interface as suggested by Linus. I have
talked about this with Doug Gilbert as well, and he would
rebase his sg v4 patches on top of "compat: scsi: sg: fix v3
compat read/write interface"
2. Actually moving handlers out of block/compat_ioctl.c and
block/scsi_ioctl.c into drivers, mixed in with cleanup
patches
3. Document how to do this right. I keep getting asked about this,
and it helps to point to some documentation file.
The branch is based on another one that fixes a couple of bugs found
during the creation of this series.
Changes since v3:
https://lore.kernel.org/lkml/20200102145552.1853992-1-arnd@arndb.de/
- Move sr_compat_ioctl fixup to correct patch (Ben Hutchings)
- Add Reviewed-by tags
Changes since v2:
https://lore.kernel.org/lkml/20191217221708.3730997-1-arnd@arndb.de/
- Rebase to v5.5-rc4, which contains the earlier bugfixes
- Fix sr_block_compat_ioctl() error handling bug found by
Ben Hutchings
- Fix idecd_locked_compat_ioctl() compat_ptr() bug
- Don't try to handle HDIO_DRIVE_TASKFILE in drivers/ide
- More documentation improvements
Changes since v1:
https://lore.kernel.org/lkml/20191211204306.1207817-1-arnd@arndb.de/
- move out the bugfixes into a branch for itself
- clean up scsi sg driver further as suggested by Christoph Hellwig
- avoid some ifdefs by moving compat_ptr() out of asm/compat.h
- split out the blkdev_compat_ptr_ioctl function; bug spotted by
Ben Hutchings
- Improve formatting of documentation
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Documentation/process/botching-up-ioctls.rst was orignally written as
a blog post for DRM driver writers, so it it misses some points while
going into a lot of detail on others.
Try to provide a replacement that addresses typical issues across a wider
range of subsystems, and follows the style of the core-api documentation
better.
Many improvements to the document are suggested by Ben Hutchings
<ben.hutchings@codethink.co.uk>, Jonathan Corbet <corbet@lwn.net> and
Geert Uytterhoeven <geert@linux-m68k.org>.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Having separate implementations of blkdev_ioctl() often leads to these
getting out of sync, despite the comment at the top.
Since most of the ioctl commands are compatible, and we try very hard
not to add any new incompatible ones, move all the common bits into a
shared function and leave only the ones that are historically different
in separate functions for native/compat mode.
To deal with the compat_ptr() conversion, pass both the integer
argument and the pointer argument into the new blkdev_common_ioctl()
and make sure to always use the correct one of these.
blkdev_ioctl() is now only kept as a separate exported interfact
for drivers/char/raw.c, which lacks a compat_ioctl variant.
We should probably either move raw.c to staging if there are no
more users, or export blkdev_compat_ioctl() as well.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There is no need to go through a compat_alloc_user_space()
copy any more, just wrap the function in a small helper that
works the same way for native and compat mode.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Having both in the same file allows a number of simplifications
to the compat path, and makes it more likely that changes to
the native path get applied to the compat version as well.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most of the HDIO ioctls are only used by the obsolete drivers/ide
subsystem, these can be handled by changing ide_cmd_ioctl() to be aware
of compat mode and doing the correct transformations in place and using
it as both native and compat handlers for all drivers.
The SCSI drivers implementing the same commands are already doing
this in the drivers, so the compat_blkdev_driver_ioctl() function
is no longer needed now.
The BLKSECTSET and HDIO_GETGEO_BIG ioctls are not implemented
in any driver any more and no longer need any conversion.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
