refcount_t complains about 0->1 transitions, which isn't *quite* what we
wanted. So use dirtyfb==1 to mean that the fb is not connected to any
output that requires dirtyfb flushing, so that we can keep the underflow
and overflow checking.
Fixes: 9e4dde28e9 ("drm/msm: Avoid dirtyfb stalls on video mode displays (v2)")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220304202146.845566-1-robdclark@gmail.com
Add a way for userspace to specify the sequence number fence used to
track completion of the submit. As the seqno fence is simply an
incrementing counter which is local to the submitqueue, it is easy for
userspace to know the next value.
This is useful for native userspace drivers in a vm guest, as the guest
to host roundtrip can have high latency. Assigning the fence seqno in
the guest userspace allows the guest to continue without waiting for
response from the host.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220224222321.60653-1-robdclark@gmail.com
Add a SYSPROF param for system profiling tools like Mesa's pps-producer
(perfetto) to control behavior related to system-wide performance
counter collection. In particular, for profiling, one wants to ensure
that GPU context switches do not effect perfcounter state, and might
want to suppress suspend (which would cause counters to lose state).
v2: Swap the order in msm_file_private_set_sysprof() [sboyd] and
initialize the sysprof_active refcount to one (because the under/
overflow checking in refcount_t doesn't expect a 0->1 transition)
meaning that values greater than 1 means sysprof is active.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220304005317.776110-4-robdclark@gmail.com
Someone on IRC once asked an innocent enough sounding question: Why
with xf86-video-modesetting is es2gears limited at 120fps.
So I broke out the perfetto tracing mesa MR and took a look. It turns
out the problem was drm_atomic_helper_dirtyfb(), which would end up
waiting for vblank.. es2gears would rapidly push two frames to Xorg,
which would blit them to screen and in idle hook (I assume) call the
DIRTYFB ioctl. Which in turn would do an atomic update to flush the
dirty rects, which would stall until the next vblank. And then the
whole process would repeat.
But this is a bit silly, we only need dirtyfb for command mode DSI
panels. So track in plane state whether dirtyfb is required, and
track in the fb how many attached planes require dirtyfb so that we
can skip it when not required. (Note, mdp4 does not actually have
cmd mode support.)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220223191118.881321-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Other processes don't need to know about faults that they are isolated
from by virtue of address space isolation. They are only interested in
whether some of their state might have been corrupted.
But to be safe, also track unattributed faults. This case should really
never happen unless there is a kernel bug (and that would never happen,
right?)
v2: Instead of adding a new param, just change the behavior of the
existing param to match what userspace actually wants [anholt]
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5934
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220201161618.778455-3-robdclark@gmail.com
Reviewed-by: Emma Anholt <emma@anholt.net>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Currently DP driver will allocate panel bridge for eDP panels. This
supports only the following topology:
- eDP encoder ⇒ eDP panel (wrapped using panel-bridge)
Simplify this code to just check if there is any next bridge in the
chain (be it a panel bridge or regular bridge). Rename panel_bridge
field to next_bridge accordingly.
This allows one to use e.g. one of the following display topologies:
- eDP encoder ⇒ ptn3460 ⇒ fixed LVDS panel
- eDP encoder ⇒ ptn3460 ⇒ LVDS connector with EDID lines for panel autodetect
- eDP encoder ⇒ ptn3460 ⇒ THC63LVD1024 ⇒ DPI panel.
- eDP encoder ⇒ LT8912 ⇒ DSI panel
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220211224006.1797846-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In commit 8a3b4c17f8 ("drm/msm/dp: employ bridge mechanism for display
enable and disable") the DP driver received a drm_bridge instance, which
is always attached to the encoder as a root bridge. However it conflicts
with the panel_bridge support for eDP panels. The panel bridge attaches
to the encoder before the "dp" bridge (DP driver's drm_bridge instance
created in msm_dp_bridge_init()) has a chance to do so. Change
panel bridge attachment to come after the "dp" bridge attachment (and to
use it as a previous bridge).
Fixes: 8a3b4c17f8 ("drm/msm/dp: employ bridge mechanism for display enable and disable")
Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220211224006.1797846-2-dmitry.baryshkov@linaro.org
[db: fixed commit message according to Stephen's suggestions]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In function dpu_encoder_phys_cmd_wait_for_commit_done we are always
checking if the relative CTL is started by waiting for an interrupt
to fire: it is fine to do that, but then sometimes we call this
function while the CTL is up and has never been put down, but that
interrupt gets raised only when the CTL gets a state change from
0 to 1 (disabled to enabled), so we're going to wait for something
that will never happen on its own.
Solving this while avoiding to restart the CTL is actually possible
and can be done by just checking if it is already up and running
when the wait_for_commit_done function is called: in this case, so,
if the CTL was already running, we can say that the commit is done
if the command transmission is complete (in other terms, if the
interface has been flushed).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210911163919.47173-2-angelogioacchino.delregno@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
DPU driver contains code to parse clock items from device tree into
special data struct and then enable/disable/set rate for the clocks
using that data struct. However the DPU driver itself uses only parsing
and enabling/disabling part (the rate setting is used by DP driver).
Move this implementation to the DP driver (which actually uses rate
setting) and replace hand-coded enable/disable/get loops in the DPU
with the respective clk_bulk operations. Put operation is removed
completely because, it is handled using devres instead.
DP implementation is unchanged for now.
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # RB3 (sdm845) and RB5 (qrb5165)
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220217055529.499829-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
dpu_kms_debugfs_init() is invoked for each minor being registered. Most
of the files created are unrelated to the minor, so there's no reason to
present them per minor.
The exception to this is the DisplayPort code, which ends up invoking
dp_debug_get() for each minor, each time associate the allocated object
with dp->debug.
As such dp_debug will create debugfs files in both the PRIMARY and the
RENDER minor's debugfs directory, but only the last reference will be
remembered.
The only use of this reference today is in the cleanup path in
dp_display_deinit_sub_modules() and the dp_debug_private object does
outlive the debugfs entries in either case, so there doesn't seem to be
any adverse effects of this, but per the code the current behavior is
unexpected, so change it to only create debugfs files for the PRIMARY
minor.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[DB: slightly change description and in-patch comment]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20220212003811.1818774-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add SC8180x to the hardware catalog, for initial support for the
platform. Due to limitations in the DP driver only one of the four DP
interfaces is left enabled.
The SC8180x platform supports the newly added DPU_INTF_WIDEBUS flag and
the Windows-on-Snapdragon bootloader leaves the widebus bit set, so this
is flagged appropriately to ensure widebus is disabled - for now.
Signed-off-by: Rob Clark <robdclark@chromium.org>
[bjorn: Reworked intf and irq definitions]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
intf_audio_select() callback function use to configure
HDMI_DP_CORE_SELECT to decide audio output routes to HDMI or DP
interface. HDMI is obsoleted at newer chipset. To keep supporting
legacy hdmi application, intf_audio_select call back function have
to be populated base on hardware chip capability where legacy
chipsets have has_audio_select flag set to true.
Changes in V2:
-- remove has_audio_select flag
-- add BIT(DPU_MDP_AUDIO_SELECT) into dpu_mdp_cfg
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1644875214-12944-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
dpu_core_irq_callback_handler() function comments seem to have become
stale and emit a warning:
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c:147:
warning: Function parameter or member 'dpu_kms' not described in 'dpu_core_irq_callback_handler'
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c:147:
warning: Excess function parameter 'arg' description in 'dpu_core_irq_callback_handler'
Fix by updating the documentation
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20220210114106.290669-3-vkoul@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
We get warning:
In function ‘dpu_encoder_virt_enable’: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1145:33:
warning: variable ‘priv’ set but not used [-Wunused-but-set-variable]
1145 | struct msm_drm_private *priv;
In function ‘dpu_encoder_virt_disable’: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1182:33:
warning: variable ‘priv’ set but not used [-Wunused-but-set-variable]
1182 | struct msm_drm_private *priv;
Remove these unused but set variables
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20220210114106.290669-1-vkoul@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
