The SRIOV PF/VF Data exchange is extended by 64KB for VF RAS Telemetry data.
Add Host RAS Telemetry enable capabilities bitfields.
Add a new VF msg REQ_RAS_ERROR_COUNT, the host response data will be populated
in the RAS Telemetry region.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
At some point, the IEEE ID identification for the replay check in the
AMD EDID was added. However, this check causes the following
out-of-bounds issues when using KASAN:
[ 27.804016] BUG: KASAN: slab-out-of-bounds in amdgpu_dm_update_freesync_caps+0xefa/0x17a0 [amdgpu]
[ 27.804788] Read of size 1 at addr ffff8881647fdb00 by task systemd-udevd/383
...
[ 27.821207] Memory state around the buggy address:
[ 27.821215] ffff8881647fda00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 27.821224] ffff8881647fda80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 27.821234] >ffff8881647fdb00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 27.821243] ^
[ 27.821250] ffff8881647fdb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 27.821259] ffff8881647fdc00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 27.821268] ==================================================================
This is caused because the ID extraction happens outside of the range of
the edid lenght. This commit addresses this issue by considering the
amd_vsdb_block size.
Cc: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the nominal VBlank is too small, optimizing for stutter can cause
the prefetch bandwidth to increase drasticaly, resulting in higher
clock and power requirements. Only optimize if it is >3x the stutter
latency.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In the case where a dml allocation fails for any reason, the
current state's dml contexts would no longer be valid. Then
subsequent calls dc_state_copy_internal would shallow copy
invalid memory and if the new state was released, a double
free would occur.
[How]
Reset dml pointers in new_state to NULL and avoid invalid
pointer
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If driver allocated region6 size is not same as the size in firmware,
dmcub won't enable region6.
[How]
Use region6 size in dmcub_fw_meta instead of a constant value.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: JinZe Xu <jinze.xu@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Number of taps is incorrectly being set when integer scaling is enabled.
Taps required when src_rect != dst_rect previously not considered.
Perform the calculations when integer scaling is enabled.
Set taps to 1 if the scaling ratio is 1:1.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unconditionally reading DP tunneling support results in extraneous
errors messages on certain devices. Fix this by guarding the DPCD read
for DP tunneling support for USB4 DPIA endpoints.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
HPD error status does not cover Replay desync error status
while executing autotests and CTS tests.
[How]
Refactor the checking flow, reporting the HPD error based on
different eDP feature.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable the cleaner shader for GFX11.0.0/11.0.2 GPUs to provide data
isolation between GPU workloads. The cleaner shader is responsible for
clearing the Local Data Store (LDS), Vector General Purpose Registers
(VGPRs), and Scalar General Purpose Registers (SGPRs), which helps
prevent data leakage and ensures accurate computation results.
This update extends cleaner shader support to GFX11.0.0/11.0.2 GPUs,
previously available for GFX11.0.3. It enhances security by clearing GPU
memory between processes and maintains a consistent GPU state across KGD
and KFD workloads.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In kfd_procfs_show(), the sdma_activity_work_handler is a local variable
and the sdma_activity_work_handler.sdma_activity_work should initialize
with INIT_WORK_ONSTACK() instead of INIT_WORK().
Fixes: 32cb59f313 ("drm/amdkfd: Track SDMA utilization per process")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The coherency flags can only be determined when the BO is locked and that
in turn is only guaranteed when the mapping is validated.
Fix the check, move the resource check into the function and add an assert
that the BO is locked.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: d1a372af1c ("drm/amdgpu: Set MTYPE in PTE based on BO flags")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, the pp_dpm_mclk values are reported in descending order
on SMU IP v14.0.0/1/4. Adjust to ascending order for consistency
with other clock interfaces.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Raise an info message in kernel log if PCIe root complex
determines that a AMD GPU device D<i> cannot have P2P
communication with another AMD GPU device D<j>
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
H264 supports 4096x4096 starting from Polaris.
HEVC also supports 4096x4096, with VCN 3 and newer 8192x4352
is supported.
Signed-off-by: David Rosca <david.rosca@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the sysfs interface for jpeg:
jpeg_reset_mask
The interface is read-only and show the resets supported by the IP.
For example, full adapter reset (mode1/mode2/BACO/etc),
soft reset, queue reset, and pipe reset.
V2: the sysfs node returns a text string instead of some flags (Christian)
v3: add a generic helper which takes the ring as parameter
and print the strings in the order they are applied (Christian)
check amdgpu_gpu_recovery before creating sysfs file itself,
and initialize supported_reset_types in IP version files (Lijo)
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the sysfs interface for vpe:
vpe_reset_mask
The interface is read-only and show the resets supported by the IP.
For example, full adapter reset (mode1/mode2/BACO/etc),
soft reset, queue reset, and pipe reset.
V2: the sysfs node returns a text string instead of some flags (Christian)
v3: add a generic helper which takes the ring as parameter
and print the strings in the order they are applied (Christian)
check amdgpu_gpu_recovery before creating sysfs file itself,
and initialize supported_reset_types in IP version files (Lijo)
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the sysfs interface for sdma:
sdma_reset_mask
The interface is read-only and show the resets supported by the IP.
For example, full adapter reset (mode1/mode2/BACO/etc),
soft reset, queue reset, and pipe reset.
V2: the sysfs node returns a text string instead of some flags (Christian)
v3: add a generic helper which takes the ring as parameter
and print the strings in the order they are applied (Christian)
check amdgpu_gpu_recovery before creating sysfs file itself,
and initialize supported_reset_types in IP version files (Lijo)
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remote access to external AIDs isn't possible with VCN RRMT disabled
and it is disabled on SoCs with GC 9.4.4, so use only local offsets.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reset sequence indicates that hardware already ran into a bad state.
Avoid sending unmap queue request to reset KCQ. This will also cover RAS
error scenarios which need a reset to recover, hence remove the check.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In current logic, it calls ring_alloc followed by a ring_test. ring_test
in turn will call another ring_alloc. This is illegal usage as a
ring_alloc is expected to be closed properly with a ring_commit. Change
to commit the map/unmap queue packet first followed by a ring_test. Add a
comment about the usage of ring_test.
Also, reorder the current pre-condition checks of job hang or kiq ring
scheduler not ready. Without them being met, it is not useful to attempt
ring or memory allocations.
Fixes tag refers to the original patch which introduced this issue which
then got carried over into newer code.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: 6c10b5cc4e ("drm/amdgpu: Remove duplicate code in gfx_v8_0.c")
Add two sysfs interfaces for gfx and compute:
gfx_reset_mask
compute_reset_mask
These interfaces are read-only and show the resets supported by the IP.
For example, full adapter reset (mode1/mode2/BACO/etc),
soft reset, queue reset, and pipe reset.
V2: the sysfs node returns a text string instead of some flags (Christian)
v3: add a generic helper which takes the ring as parameter
and print the strings in the order they are applied (Christian)
check amdgpu_gpu_recovery before creating sysfs file itself,
and initialize supported_reset_types in IP version files (Lijo)
v4: Fixing uninitialized variables (Tim)
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The currect code use the address "adev->mes.read_val_ptr" to
store the value read from register via mes.
So when multiple threads read register,
multiple threads have to share the one address,
and overwrite the value each other.
Assign an address by "amdgpu_device_wb_get" to store register value.
each thread will has an address to store register value.
Signed-off-by: chongli2 <chongli2@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFX 12 does not require a page size cap for the trap handler because
it does not require a CWSR work around like GFX 11 did.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: David Belanger <david.belanger@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add sysfs node to show supported NPS mode for the
partition configuration selected using xcp_config
v2: Hide node if dynamic nps switch not supported
v3: Fix removal of files in case of error
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For DPX mode, the number of memory partitions supported should be less
than or equal to 2.
Fixes: 1589c82a10 ("drm/amdgpu: Check memory ranges for valid xcp mode")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds the cleaner shader microcode for GFX11.0.3 GPUs. The
cleaner shader is a piece of GPU code that is used to clear or
initialize certain GPU resources, such as Local Data Share (LDS), Vector
General Purpose Registers (VGPRs), and Scalar General Purpose Registers
(SGPRs).
Clearing these resources is important for ensuring data isolation
between different workloads running on the GPU. Without the cleaner
shader, residual data from a previous workload could potentially be
accessed by a subsequent workload, leading to data leaks and incorrect
computation results.
The cleaner shader microcode is represented as an array of 32-bit words
(`gfx_11_0_3_cleaner_shader_hex`). This array is the binary
representation of the cleaner shader code, which is written in a
low-level GPU instruction set.
When the cleaner shader feature is enabled, the AMDGPU driver loads this
array into a specific location in the GPU memory. The GPU then reads
this memory location to fetch and execute the cleaner shader
instructions.
The cleaner shader is executed automatically by the GPU at the end of
each workload, before the next workload starts. This ensures that all
GPU resources are in a clean state before the start of each workload.
This addition is part of the cleaner shader feature implementation. The
cleaner shader feature helps resource utilization by cleaning up GPU
resources after they are used. It also enhances security and reliability
by preventing data leaks between workloads.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
