Commit b9401c658d ("MAINTAINERS: add gameport.h, serio.h and uinput.h to
INPUT section") adds further header files in ./include/linux/ and
./include/uapi/linux to the INPUT section, but the file
./include/linux/uinput.h does not exist since commit a11bc476b9 ("Input:
uinput - fold header into the driver proper") removed this header file
in 2017.
Fortunately, ./scripts/get_maintainer.pl --self-test=patterns complains
about a broken reference. Remove the file entry referring to the
non-existing header file in the INPUT section.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Link: https://lore.kernel.org/r/20240903093948.122957-1-lukas.bulwahn@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add i8042.h and libps2.h to "INPUT (KEYBOARD, MOUSE, JOYSTICK,
TOUCHSCREEN) DRIVERS" section so that get_maintainers.pl script
will pick them up and patches affecting them will be sent to the
right place.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add gameport.h, serio.h and uinput.h and complementing them headers
from include/uapi/ to "INPUT (KEYBOARD, MOUSE, JOYSTICK, TOUCHSCREEN)
DRIVERS" section so that get_maintainers.pl script will pick them up
and patches affecting them will be sent to the right place.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Adding software support for enabling the pure gpio capability of the
device - which allows all I/O to be used as GPIO. Previously, I/O
configuration was limited by software to partial GPIO support only.
When working in a pure gpio mode, the device does not require the
certain properties and hence, the following are now made optional:
- interrupts
- keypad,num-rows
- keypad,num-columns
- linux,keymap
However, note that the above are required to be specified when
configuring the device as a keypad, for which dependencies have been added
such that specifying either one requires the remaining as well.
Also, note that interrupts are made optional, but required when the device
has either been configured in keypad mode or as an interrupt controller.
This has been done since they may not necessarily be used when leveraging
the device purely for GPIO.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
Link: https://lore.kernel.org/r/20240826-adp5588_gpio_support-v11-3-3e5ac2bd31b7@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Convert binding doc ads7846.txt to yaml format.
Additional change:
- add ref to touchscreen.yaml and spi-peripheral-props.yaml.
- use common node name touchscreen.
- sort ti properties alphabetically.
- sort common properties alphabetically.
- sort compatible string alphabetically.
- remove vcc-supply from required list.
- deprecated ti,x-min, ti,y-min
Fix below warning: arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dtb: touchscreen@0:
ti,x-min: b'\x00}' is not of type 'object', 'array', 'boolean', 'null'
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240826162302.960732-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Convert binding doc colibri-vf50-ts.txt to yaml.
Additional change:
- add ref touchscreen.yaml.
- remove standard pinctrl properties.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dtb: /touchscreen:
failed to match any schema with compatible: ['toradex,vf50-touchscreen']
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240819142434.311760-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Convert binding doc ad7879.txt to yaml format.
Additional change:
- Add ref to /schemas/spi/spi-peripheral-props.yaml
- Add #gpio-cell
- Remove spi-cpol and spi-cpha in example, the place hold 'spi' can't
correct detect spi-controler.yaml. So these two properties can't
be recongnized.
Fix warning:
arch/arm64/boot/dts/freescale/imx8dx-colibri-aster.dtb:
/bus@5a000000/i2c@5a800000/touchscreen@2c: failed to match any schema with compatible: ['adi,ad7879-1']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240810143840.3615450-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The cyttsp4 touchscreen driver was contributed in 2013 and since then
has seen no updates. The driver uses platform data (no device tree
support) and there are no users of it in the mainline kernel. There were
occasional fixes to it for issues either found by static code analysis
tools or via visual inspection, but otherwise the driver is completely
untested.
Remove the driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/ZrAZ2cUow_z838tp@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver does not try to power down the rails at system suspend or
when touchscreen is not in use, but rather enables regulators at probe
time. Power savings are achieved by requesting the controller to enter
low power mode.
Switch to devm_regulator_bulk_get_enable() instead of separately
requesting regulators, enabling them, and installing a custom
devm-action to disable them on unbind/remove, which simplifies the
code.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/ZrAgj9rG6oVqfdoK@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of setting irq_set_irq_wake() directly in probe(), mark the device
as wakeup-capable, and use enable_irq_wake() and disable_irq_wake() in
suspend/resume path.
This also allows changing the wakeup setting dynamically at runtime using
/sys/devices/.../tsc2005/power/wakeup.
Reviewed-By: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20240711172719.1248373-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When the driver has been converted to use gpiod API it was requesting
and asserting the reset on probe, but never deasserted it. However
because of incorrect annotations in device tree marking reset line as
active high whereas in reality it is active low, the end result was
that the chip was never reset on probe. With polarity of the reset line
now corrected this became a problem.
Fix this by calling tsc200x_reset() from tsc200x_probe() to properly
complete the reset sequence and move requesting the reset GPIO and VIO
supply closer to the point where we need to start talking to the
hardware.
Fixes: d257f2980f ("Input: tsc2005 - convert to gpiod")
Link: https://lore.kernel.org/r/20240711172719.1248373-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The chip needs to be powered up before calling tsc200x_stop_scan() which
communicates with it; move the call to enable the regulator earlier in
tsc200x_probe().
At the same time switch to using devm_regulator_get_enable() to simplify
error handling. This also makes sure that regulator is not shut off too
early when unbinding the driver.
Link: https://lore.kernel.org/r/20240711172719.1248373-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use of_property_present() to test for property presence rather than
of_get_property(). This is part of a larger effort to remove callers
of of_get_property() and similar functions. of_get_property() leaks
the DT property data pointer which is a problem for dynamically
allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240731191312.1710417-14-robh@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
MCS-5000/5080 chips belong to the 1st generation of Melfas chips,
manufactured in 2000-2007.
The driver relies on custom platform data (no DT support) and there
never were any users of this driver in the mainline kernel. It is likely
that the driver was (like mcs5000_ts driver) was tested on S3C6410 NCP
board (with Samsung S3C6410 SoC), but the touchkey device was never
added to the board file. This board was removed in v6.3 in commit
743c8fbb90 ("ARM: s3c: remove most s3c64xx board support").
Remove the driver since there are no users.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240714060029.1528662-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
MCS-5000 belongs to the 1st generation of Melfas chips, manufactured in
2000-2007.
The driver relies on custom platform data (no DT support) and there
never were any users of this driver in the mainline kernel. The commit
adding the driver mentioned that the driver was tested on S3C6410 NCP
board (with Samsung S3C6410 SoC) but the touchscreen device was never
added to the board file. This board was removed in v6.3 in commit
743c8fbb90 ("ARM: s3c: remove most s3c64xx board support").
Remove the driver since there are no users.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240714060029.1528662-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of using a single table containing information about various
touchscreens and enums to match the driver ID table data with chip
information define individual per-protocol instances of
usbtouch_device_info structure and reference them directly from
the usbtouch_devices ID table. This is simpler, safer, and uses less
memory in case some protocols are disabled.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240712051851.3463657-6-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In preparation of splitting big usbtouch_dev_info table into separate
per-protocol structures and constifying them move process_pkt() from the
device info into main drvice structure and set it up in probe().
We can derive if we should use single- or multi-packet handling based
on presence of get_pkt_len() method.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240712051851.3463657-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
