GSC devices perform legal firmware initiated resets due to state transition
that may appear as unexpected to the driver. Lower the log level for those
devices to debug level and save the firmware status registers.
When the device comes out of the reset it is possible to check whether the
resets was due to a firmware error or an exception
and only than produce a warning.
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20231015080540.95922-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xu writes:
FPGA Manager changes for 6.7-rc1
- Rob's change uses device_get_match_data/spi_get_device_match_data() to
get the driver match data for several drivers.
- Nava's change sets 44-bit DMA mask for versal fpga.
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: versal: Add support for 44-bit DMA operations
fpga: altera-ps-spi: Use spi_get_device_match_data()
fpga: Use device_get_match_data()
Use preferred spi_get_device_match_data() instead of of_match_device() and
spi_get_device_id() to get the driver match data. With this, adjust the
includes to explicitly include the correct headers.
Also drop of_match_ptr for of_ef_match, which is not necessary because DT
is always used for this driver.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20231006224624.444857-1-robh@kernel.org
[yilun.xu@intel.com: drop of_match_ptr for of_ef_match]
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
This reverts commit 45e34c8af5, and the
two subsequent fixes to it:
3f874c9b2a ("x86/smp: Don't send INIT to non-present and non-booted CPUs")
b1472a60a5 ("x86/smp: Don't send INIT to boot CPU")
because it seems to result in hung machines at shutdown. Particularly
some Dell machines, but Thomas says
"The rest seems to be Lenovo and Sony with Alderlake/Raptorlake CPUs -
at least that's what I could figure out from the various bug reports.
I don't know which CPUs the DELL machines have, so I can't say it's a
pattern.
I agree with the revert for now"
Ashok Raj chimes in:
"There was a report (probably this same one), and it turns out it was a
bug in the BIOS SMI handler.
The client BIOS's were waiting for the lowest APICID to be the SMI
rendevous master. If this is MeteorLake, the BSP wasn't the one with
the lowest APIC and it triped here.
The BIOS change is also being pushed to others for assimilation :)
Server BIOS's had this correctly for a while now"
and it does look likely to be some bad interaction between SMI and the
non-BSP cores having put into INIT (and thus unresponsive until reset).
Link: https://bbs.archlinux.org/viewtopic.php?pid=2124429
Link: https://www.reddit.com/r/openSUSE/comments/16qq99b/tumbleweed_shutdown_did_not_finish_completely/
Link: https://forum.artixlinux.org/index.php/topic,5997.0.html
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2241279
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 295525e29a ("virtio_net: merge dma operations when filling
mergeable buffers") unmaps the buffer with DMA_ATTR_SKIP_CPU_SYNC when
the dma->ref is zero. We do that with DMA_ATTR_SKIP_CPU_SYNC, because we
do not want to do the sync for the entire page_frag. But that misses the
sync for the current area.
This patch does cpu sync regardless of whether the ref is zero or not.
Fixes: 295525e29a ("virtio_net: merge dma operations when filling mergeable buffers")
Reported-by: Michael Roth <michael.roth@amd.com>
Closes: http://lore.kernel.org/all/20230926130451.axgodaa6tvwqs3ut@amd.com
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some USB and Thunderbolt driver fixes for 6.6-rc6 to resolve
a number of small reported issues. Included in here are:
- thunderbolt driver fixes
- xhci driver fixes
- cdns3 driver fixes
- musb driver fixes
- a number of typec driver fixes
- a few other small driver fixes
All of these have been in linux-next with no reported issues"
* tag 'usb-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
usb: typec: ucsi: Use GET_CAPABILITY attributes data to set power supply scope
usb: typec: ucsi: Fix missing link removal
usb: typec: altmodes/displayport: Signal hpd low when exiting mode
xhci: Preserve RsvdP bits in ERSTBA register correctly
xhci: Clear EHB bit only at end of interrupt handler
xhci: track port suspend state correctly in unsuccessful resume cases
usb: xhci: xhci-ring: Use sysdev for mapping bounce buffer
usb: typec: ucsi: Clear EVENT_PENDING bit if ucsi_send_command fails
usb: misc: onboard_hub: add support for Microchip USB2412 USB 2.0 hub
usb: gadget: udc-xilinx: replace memcpy with memcpy_toio
usb: cdns3: Modify the return value of cdns_set_active () to void when CONFIG_PM_SLEEP is disabled
usb: dwc3: Soft reset phy on probe for host
usb: hub: Guard against accesses to uninitialized BOS descriptors
usb: typec: qcom: Update the logic of regulator enable and disable
usb: gadget: ncm: Handle decoding of multiple NTB's in unwrap call
usb: musb: Get the musb_qh poniter after musb_giveback
usb: musb: Modify the "HWVers" register address
usb: cdnsp: Fixes issue with dequeuing not queued requests
thunderbolt: Restart XDomain discovery handshake after failure
thunderbolt: Correct TMU mode initialization from hardware
...
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty/serial driver fixes for 6.6-rc6 that resolve
some reported issues. Included in here are:
- serial core pm runtime fix for issue reported by many
- 8250_omap driver fix
- rs485 spinlock fix for reported problem
- ams-delta bugfix for previous tty api changes in -rc1 that missed
this driver that never seems to get built in any test systems
All of these have been in linux-next for over a week with no reported
problems"
* tag 'tty-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
ASoC: ti: ams-delta: Fix cx81801_receive() argument types
serial: core: Fix checks for tx runtime PM state
serial: 8250_omap: Fix errors with no_console_suspend
serial: Reduce spinlocked portion of uart_rs485_config()
Pull char/misc driver fixes from Greg KH:
"Here is a small set of char/misc and other smaller driver subsystem
fixes for 6.6-rc6. Included in here are:
- lots of iio driver fixes
- binder memory leak fix
- mcb driver fixes
- counter driver fixes
- firmware loader documentation fix
- documentation update for embargoed hardware issues
All of these have been in linux-next for over a week with no reported
issues"
* tag 'char-misc-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (22 commits)
iio: pressure: ms5611: ms5611_prom_is_valid false negative bug
dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes
iio: adc: ad7192: Correct reference voltage
iio: light: vcnl4000: Don't power on/off chip in config
iio: addac: Kconfig: update ad74413r selections
iio: pressure: dps310: Adjust Timeout Settings
iio: imu: bno055: Fix missing Kconfig dependencies
iio: adc: imx8qxp: Fix address for command buffer registers
iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()
iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handler
dt-bindings: iio: rohm,bu27010: add missing vdd-supply to example
binder: fix memory leaks of spam and pending work
firmware_loader: Update contact emails for ABI docs
Documentation: embargoed-hardware-issues.rst: Clarify prenotifaction
mcb: remove is_added flag from mcb_device struct
coresight: tmc-etr: Disable warnings for allocation failures
coresight: Fix run time warnings while reusing ETR buffer
iio: admv1013: add mixer_vgate corner cases
iio: pressure: bmp280: Fix NULL pointer exception
iio: dac: ad3552r: Correct device IDs
...
Pull overlayfs fixes from Amir Goldstein:
- Various fixes for regressions due to conversion to new mount
api in v6.5
- Disable a new mount option syntax (append lowerdir) that was
added in v6.5 because we plan to add a different lowerdir
append syntax in v6.7
* tag 'ovl-fixes-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: temporarily disable appending lowedirs
ovl: fix regression in showing lowerdir mount option
ovl: fix regression in parsing of mount options with escaped comma
fs: factor out vfs_parse_monolithic_sep() helper
Pull powerpc fixes from Michael Ellerman:
- Fix softlockup/crash when using hcall tracing
- Fix pte_access_permitted() for PAGE_NONE on 8xx
- Fix inverted pte_young() test in __ptep_test_and_clear_young()
on 64-bit BookE
- Fix unhandled math emulation exception on 85xx
- Fix kernel crash on syscall return on 476
Thanks to Athira Rajeev, Christophe Leroy, Eddie James, and Naveen N
Rao.
* tag 'powerpc-6.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/47x: Fix 47x syscall return crash
powerpc/85xx: Fix math emulation exception
powerpc/64e: Fix wrong test in __ptep_test_and_clear_young()
powerpc/8xx: Fix pte_access_permitted() for PAGE_NONE
powerpc/pseries: Remove unused r0 in the hcall tracing code
powerpc/pseries: Fix STK_PARAM access in the hcall tracing code
Pull CPU hotplug fix from Ingo Molnar:
"Fix a Longsoon build warning by harmonizing the
arch_[un]register_cpu() prototypes between architectures"
* tag 'smp-urgent-2023-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu-hotplug: Provide prototypes for arch CPU registration
Pull smb server fixes from Steve French:
- Fix for possible double free in RPC read
- Add additional check to clarify smb2_open path and quiet Coverity
- Fix incorrect error rsp in a compounding path
- Fix to properly fail open of file with pending delete on close
* tag '6.6-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix potential double free on smb2_read_pipe() error path
ksmbd: fix Null pointer dereferences in ksmbd_update_fstate()
ksmbd: fix wrong error response status by using set_smb2_rsp_status()
ksmbd: not allow to open file if delelete on close bit is set
Pull smb client fixes from Steve French:
- fix caching race with open_cached_dir and laundromat cleanup of
cached dirs (addresses a problem spotted with xfstest run with
directory leases enabled)
- reduce excessive resource usage of laundromat threads
* tag '6.6-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: prevent new fids from being removed by laundromat
smb: client: make laundromat a delayed worker
Pull x86 fixes from Ingo Molnar:
"Fix a false-positive KASAN warning, fix an AMD erratum on Zen4 CPUs,
and fix kernel-doc build warnings"
* tag 'x86-urgent-2023-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives: Disable KASAN in apply_alternatives()
x86/cpu: Fix AMD erratum #1485 on Zen4-based CPUs
x86/resctrl: Fix kernel-doc warnings
Pull x86 perf event fix from Ingo Molnar:
"Fix an LBR sampling bug"
* tag 'perf-urgent-2023-10-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/lbr: Filter vsyscall addresses
Kernel v6.5 converted overlayfs to new mount api.
As an added bonus, it also added a feature to allow appending lowerdirs
using lowerdir=:/lower2,lowerdir=::/data3 syntax.
This new syntax has raised some concerns regarding escaping of colons.
We decided to try and disable this syntax, which hasn't been in the wild
for so long and introduce it again in 6.7 using explicit mount options
lowerdir+=/lower2,datadir+=/data3.
Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Link: https://lore.kernel.org/r/CAJfpegsr3A4YgF2YBevWa6n3=AcP7hNndG6EPMu3ncvV-AM71A@mail.gmail.com/
Fixes: b36a5780cb ("ovl: modify layer parameter parsing")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Pull xfs fixes from Chandan Babu:
- Fix calculation of offset of AG's last block and its length
- Update incore AG block count when shrinking an AG
- Process free extents to busy list in FIFO order
- Make XFS report its i_version as the STATX_CHANGE_COOKIE
* tag 'xfs-6.6-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: reinstate the old i_version counter as STATX_CHANGE_COOKIE
xfs: Remove duplicate include
xfs: correct calculation for agend and blockcount
xfs: process free extents to busy list in FIFO order
xfs: adjust the incore perag block_count when shrinking
Before commit b36a5780cb ("ovl: modify layer parameter parsing"),
spaces and commas in lowerdir mount option value used to be escaped using
seq_show_option().
In current upstream, when lowerdir value has a space, it is not escaped
in /proc/mounts, e.g.:
none /mnt overlay rw,relatime,lowerdir=l l,upperdir=u,workdir=w 0 0
which results in broken output of the mount utility:
none on /mnt type overlay (rw,relatime,lowerdir=l)
Store the original lowerdir mount options before unescaping and show
them using the same escaping used for seq_show_option() in addition to
escaping the colon separator character.
Fixes: b36a5780cb ("ovl: modify layer parameter parsing")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Pull input fixes from Dmitry Torokhov:
- a reworked way for handling reset delay on SMBus-connected Synaptics
touchpads (the original one, while being correct, uncovered an old
bug in fallback to PS/2 code that was fixed separately; the new one
however avoids having delay in serio port "fast" resume, and instead
has the wait in the RMI4 code)
- a fix for potential crashes when devices with Elan controllers (and
Synaptics) fall back to PS/2 code. Can't be hit without the original
patch above, but still good to have it fixed
- a couple new device IDs in xpad Xbox driver
- another quirk for Goodix driver to deal with stuff vendors put in
ACPI tables
- a fix for use-after-free on disconnect for powermate driver
- a quirk to not initialize PS/2 mouse port on Fujitsu Lifebook E5411
laptop as it makes keyboard not usable and the device uses
hid-over-i2c touchpad anyways
* tag 'input-for-v6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: powermate - fix use-after-free in powermate_config_complete
Input: xpad - add PXN V900 support
Input: synaptics-rmi4 - handle reset delay when using SMBus trsnsport
Input: psmouse - fix fast_reconnect function for PS/2 mode
Revert "Input: psmouse - add delay when deactivating for SMBus mode"
Input: goodix - ensure int GPIO is in input for gpio_count == 1 && gpio_int_idx == 0 case
Input: i8042 - add Fujitsu Lifebook E5411 to i8042 quirk table
Input: xpad - add HyperX Clutch Gladiate Support
Touch controllers need some time after receiving reset command for the
firmware to finish re-initializing and be ready to respond to commands
from the host. The driver already had handling for the post-reset delay
for I2C and SPI transports, this change adds the handling to
SMBus-connected devices.
SMBus devices are peculiar because they implement legacy PS/2
compatibility mode, so reset is actually issued by psmouse driver on the
associated serio port, after which the control is passed to the RMI4
driver with SMBus companion device.
Note that originally the delay was added to psmouse driver in
92e24e0e57 ("Input: psmouse - add delay when deactivating for SMBus
mode"), but that resulted in an unwanted delay in "fast" reconnect
handler for the serio port, so it was decided to revert the patch and
have the delay being handled in the RMI4 driver, similar to the other
transports.
Tested-by: Jeffery Miller <jefferymiller@google.com>
Link: https://lore.kernel.org/r/ZR1yUFJ8a9Zt606N@penguin
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When the SMBus connection is attempted psmouse_smbus_init() sets
the fast_reconnect pointer to psmouse_smbus_reconnecti(). If SMBus
initialization fails, elantech_setup_ps2() and synaptics_init_ps2() will
fallback to PS/2 mode, replacing the psmouse private data. This can cause
issues on resume, since psmouse_smbus_reconnect() expects to find an
instance of struct psmouse_smbus_dev in psmouse->private.
The issue was uncovered when in 92e24e0e57 ("Input: psmouse - add
delay when deactivating for SMBus mode") psmouse_smbus_reconnect()
started attempting to use more of the data structure. The commit was
since reverted, not because it was at fault, but because there was found
a better way of doing what it was attempting to do.
Fix the problem by resetting the fast_reconnect pointer in psmouse
structure in elantech_setup_ps2() and synaptics_init_ps2() when the PS/2
mode is used.
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Jeffery Miller <jefferymiller@google.com>
Fixes: bf232e460a ("Input: psmouse-smbus - allow to control psmouse_deactivate")
Link: https://lore.kernel.org/r/20231005002249.554877-1-jefferymiller@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull SCSI fix from James Bottomley:
"A single tiny fix in the ufs driver core correcting the reversed logic
in an error message"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Correct clear TM error log
Pull ceph fixes from Ilya Dryomov:
"Fixes for an overreaching WARN_ON, two error paths and a switch to
kernel_connect() which recently grown protection against someone using
BPF to rewrite the address.
All but one marked for stable"
* tag 'ceph-for-6.6-rc6' of https://github.com/ceph/ceph-client:
ceph: fix type promotion bug on 32bit systems
libceph: use kernel_connect()
ceph: remove unnecessary IS_ERR() check in ceph_fname_to_usr()
ceph: fix incorrect revoked caps assert in ceph_fill_file_size()
Pull ACPI fixes from Rafael Wysocki:
"Add an ACPI EC GPE detection quirk for HP Pavilion Gaming 15-dk1xxx
and ACPI IRQ override quirks for TongFang GM6BGEQ, GM6BG5Q and
GM6BG0Q, and for ASUS ExpertBook B1402CBA (Hans de Goede).
* tag 'acpi-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: Add TongFang GM6BGEQ, GM6BG5Q and GM6BG0Q to irq1_edge_low_force_override[]
ACPI: EC: Add quirk for the HP Pavilion Gaming 15-dk1xxx
ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CBA
Pull RISC-V fixes from Palmer Dabbelt:
- A handful of build fixes
- A fix to avoid mixing up user/kernel-mode breakpoints, which can
manifest as a hang when mixing k/uprobes with other breakpoint
sources
- A fix to avoid double-allocting crash kernel memory
- A fix for tracefs syscall name mangling, which was causing syscalls
not to show up in tracefs
- A fix to the perf driver to enable the hw events when selected, which
can trigger a BUG on some userspace access patterns
* tag 'riscv-for-linus-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
drivers: perf: Fix panic in riscv SBI mmap support
riscv: Fix ftrace syscall handling which are now prefixed with __riscv_
RISC-V: Fix wrong use of CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK
riscv: kdump: fix crashkernel reserving problem on RISC-V
riscv: Remove duplicate objcopy flag
riscv: signal: fix sigaltstack frame size checking
riscv: errata: andes: Makefile: Fix randconfig build issue
riscv: Only consider swbp/ss handlers for correct privileged mode
riscv: kselftests: Fix mm build by removing testcases subdirectory
