Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
The device pointer is stored in struct soundscape for calling
dev_*().
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-35-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Some functions are changed to receive a device pointer to be passed to
dev_*() calls.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-34-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Some functions are changed to receive snd_card pointer for referring
to the device pointer for dev_*() calls, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-31-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
The card pointer is stored in struct snd_opti9xx and snd_miro to be
referred for dev_*() calls.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-30-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
The card pointer is stored in struct snd_opl3sa2 to be referred for
dev_*() calls.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-29-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Some commented-out debug prints and dead code are dropped as well.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-27-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
For referring to the device, introduce snd_card pointer to struct
snd_es18xx.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-26-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
For referring to the device, introduce snd_card pointer to struct
snd_es1688.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-25-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Use the standard print API instead of open-coded printk().
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-20-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
The commented old debug prints are dropped, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-12-tiwai@suse.de
The vx_core.dev field has never been set but referred incorrectly at
firmware loading. Pass the proper device pointer from card->dev at
request_firmware(), and drop the unused dev field from vx_core, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-11-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
Some debug prints are cleaned up with a macro, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-7-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
The commented-out debug prints got removed, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-6-tiwai@suse.de
Use the standard print API with dev_*() instead of the old house-baked
one. It gives better information and allows dynamically control of
debug prints.
The assignment of mpu->rmidi was moved to an earlier place, so that
dev_*() can access to the proper device pointer.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-5-tiwai@suse.de
The recent extension added a new ALSA sequencer port info flag bit
SNDRV_SEQ_PORT_FLG_IS_MIDI1, but it's not reported back when
inquired. Fix it to report properly.
Fixes: 0079c9d1e5 ("ALSA: ump: Handle MIDI 1.0 Function Block in MIDI 2.0 protocol")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807092303.1935-7-tiwai@suse.de
When a sequencer port assigned to a UMP Group that is specific to MIDI
1.0 among MIDI 2.0 client, mark it explicitly in the proc output, so
that user can see it easily. This is an exceptional case where the
message isn't converted to MIDI 1.0 even if the client is running in
MIDI 2.0 mode.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807092303.1935-6-tiwai@suse.de
When a FB is created from a GTB instead of UMP FB Info inquiry, we
missed the update of the corresponding UMP Group attributes.
Export the call of updater and let it be called from the USB driver.
Fixes: 0642a3c5ca ("ALSA: ump: Update substream name from assigned FB names")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807092303.1935-5-tiwai@suse.de
When a MIDI 1.0 protocol is specified in a GTB entry while others are
set in MIDI 2.0, it should be seen as a legacy MIDI 1.0 port. Since
recently we allow drivers to set a flag SNDRV_UMP_BLOCK_IS_MIDI1 to a
FB for that purpose. This patch tries to set that flag when the
device shows such a configuration.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807092303.1935-4-tiwai@suse.de
It's valid to give different protocols via multiple GTBs; e.g. a MIDI
1.0 port is embedded in a MIDI 2.0 device that talks with MIDI 2.0
protocol. However, the current driver implementation assumes only a
single protocol over the whole Endpoint, and it can't handle such a
scenario.
This patch changes the driver's behavior to parse GTBs to accept
multiple protocols. Instead of switching to the last given protocol,
it adds the protocol capability bits now. Meanwhile, the default
protocol is chosen by the first given protocol in GTBs.
Practically seen, this should be a minor issue, as new devices should
specify the protocols properly via UMP Endpoint Info messages, so this
is rather just covering a corner case.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807092303.1935-3-tiwai@suse.de
For an invalid input value that is out of the given range, currently
USB-audio driver corrects the value silently and accepts without
errors. This is no wrong behavior, per se, but the recent kselftest
rather wants to have an error in such a case, hence a different
behavior is expected now.
This patch adds a sanity check at each control put for the standard
mixer types and returns an error if an invalid value is given.
Note that this covers only the standard mixer types. The mixer quirks
that have own control callbacks would need different coverage.
Link: https://patch.msgid.link/20240806124651.28203-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The UMP v1.1 spec says in the section 6.2.1:
"If a UMP Endpoint declares MIDI 2.0 Protocol but a Function Block
represents a MIDI 1.0 connection, then may optionally be used for
messages to/from that Function Block."
It implies that the driver can (and should) keep MIDI 1.0 CVM
exceptionally for those FBs even if UMP Endpoint is running in MIDI
2.0 protocol, and the current driver lacks of it.
This patch extends the sequencer port info to indicate a MIDI 1.0
port, and tries to send/receive MIDI 1.0 CVM as is when this port is
the source or sink. The sequencer port flag is set by the driver at
parsing FBs and GTBs although application can set it to its own
user-space clients, too.
Link: https://patch.msgid.link/20240806070024.14301-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent changes in IOMMU made the non-contiguous page allocations
as default, hence we can simply use the standard DMA allocation for
the S/G pages as well. In this patch, we simplify the code by trying
the standard DMA allocation at first, instead of
dma_alloc_noncontiguous().
For the case without IOMMU, we still need to manage the S/G pages
manually, so we keep the same fallback routines like before.
The fallback types (SNDRV_DMA_TYPE_DEV_SG_FALLBACK & co) are dropped /
folded into SNDRV_DMA_TYPE_DEV_SG and co now. The allocation via the
standard DMA call overrides the type accordingly, hence we don't have
to have extra fallback types any longer. OTOH, SNDRV_DMA_TYPE_DEV_SG
is no longer an alias but became its own type back again.
Note that this patch requires another prerequisite fix for memmalloc
helper to use the DMA API for WC pages on x86.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219087
Link: https://patch.msgid.link/20240801064808.31205-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The memalloc helper used a house-made code for allocation of WC pages
on x86, since the standard DMA API doesn't cover it well. Meanwhile,
the manually allocated pages won't work together with IOMMU, resulting
in faults, so we should switch to the DMA API in that case, instead.
This patch tries to switch back to DMA API for WC pages on x86, but
with some additional tweaks that are missing.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219087
Link: https://patch.msgid.link/20240801064808.31205-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
