CT action is a special case different from other actions, CT clear action
is not required when get ct action, but this case is not considered.
If CT clear action in the flow rule, skip the CT clear action when get ct
action, return the first ct action that is not a CT clear action
Signed-off-by: Wentao Jia <wentao.jia@corigine.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Saeed Mahameed says:
====================
mlx5-updates-2023-03-13
1) Trivial cleanup patches
2) By Sandipan Patra: Implement thermal zone to report NIC temperature
3) Adham Faris, Improves devlink health diagnostics for netdev objects
4) From Maor, Enable TC offload for egress and engress MACVLAN over bond
5) From Gal, add devlink hairpin queues parameters to replace debugfs
as was discussed in [1]:
[1] https://lore.kernel.org/all/20230111194608.7f15b9a1@kernel.org/
====================
Link: https://lore.kernel.org/all/20230314054234.267365-1-saeed@kernel.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently RQ health diagnostics doesn't inform the user whether an RQ
is an XSK RQ or not.
Address this, by adding XSK state flag to RQ SW state enum in core/en.h.
XSK will be '1' if current RQ is an XSK RQ, and it will be '0' if it's
not.
In this example below, it can be seen that XSK field value is '1' since
xdpsock program have been attached to channel 0 before issuing the
devlink query command:
$ devlink health diagnose auxiliary/mlx5_core.eth.0/65535 reporter rx
Output:
=======================================================================
Common config:
RQ:
type: 2 stride size: 4096 size: 16 ts_format: FRC
CQ:
stride size: 64 size: 1024
RQs:
channel ix: 0 rqn: 4236 HW state: 1 WQE counter: 15 posted WQEs: 15 cc: 15
SW State:
enabled: 1 recovering: 0 am: 1 no_csum_complete: 1 csum_full: 0 mini_cqe_hw_stridx: 1 shampo: 0 mini_cqe_enhanced: 0 xsk: 1
CQ:
cqn: 1085 HW status: 0 ci: 0 size: 1024
EQ:
eqn: 7 irqn: 32 vecidx: 0 ci: 5 size: 2048
ICOSQ:
sqn: 4229 HW state: 1 cc: 158 pc: 158 WQE size: 2048
CQ:
cqn: 1080 cc: 1 size: 2048
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230314054234.267365-10-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dynamic interrupt moderation RQ and SQ feature represented by
MLX5E_RQ_STATE_AM and MLX5E_SQ_STATE_AM enums respectively, is not
consistent with the feature naming in the driver, and with the formal
feature and library names.
Hence, change MLX5E_RQ_STATE_AM and MLX5E_SQ_STATE_AM enum type names in
core/en.h to MLX5E_RQ_STATE_DIM and MLX5E_SQ_STATE_DIM respectively.
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230314054234.267365-7-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If driver teardown is called while PCI is turned off, there is a race
between health recovery and teardown. If health recovery already started
it will wait 60 sec trying to see if PCI gets back and it can recover,
but actually there is no need to wait anymore once teardown was called.
Use the MLX5_BREAK_FW_WAIT flag which is set on driver teardown to break
waiting for PCI up.
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230314054234.267365-3-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When shutdown or remove callbacks are called the driver sets the flag
MLX5_BREAK_FW_WAIT, to stop waiting for FW as teardown was called. There
is no need to clear the bit as once shutdown or remove were called as
there is no way back, the driver is going down. Furthermore, if not
cleared the flag can be used also in other loops where we may wait while
teardown was already called.
Use test_bit() instead of test_and_clear_bit() as there is no need to
clear the flag.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230314054234.267365-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
ice: refactor mailbox overflow detection
Jake Keller says:
The primary motivation of this series is to cleanup and refactor the mailbox
overflow detection logic such that it will work with Scalable IOV. In
addition a few other minor cleanups are done while I was working on the
code in the area.
First, the mailbox overflow functions in ice_vf_mbx.c are refactored to
store the data per-VF as an embedded structure in struct ice_vf, rather than
stored separately as a fixed-size array which only works with Single Root
IOV. This reduces the overall memory footprint when only a handful of VFs
are used.
The overflow detection functions are also cleaned up to reduce the need for
multiple separate calls to determine when to report a VF as potentially
malicious.
Finally, the ice_is_malicious_vf function is cleaned up and moved into
ice_virtchnl.c since it is not Single Root IOV specific, and thus does not
belong in ice_sriov.c
I could probably have done this in fewer patches, but I split pieces out to
hopefully aid in reviewing the overall sequence of changes. This does cause
some additional thrash as it results in intermediate versions of the
refactor, but I think its worth it for making each step easier to
understand.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: call ice_is_malicious_vf() from ice_vc_process_vf_msg()
ice: move ice_is_malicious_vf() to ice_virtchnl.c
ice: print message if ice_mbx_vf_state_handler returns an error
ice: pass mbxdata to ice_is_malicious_vf()
ice: remove unnecessary &array[0] and just use array
ice: always report VF overflowing mailbox even without PF VSI
ice: declare ice_vc_process_vf_msg in ice_virtchnl.h
ice: initialize mailbox snapshot earlier in PF init
ice: merge ice_mbx_report_malvf with ice_mbx_vf_state_handler
ice: remove ice_mbx_deinit_snapshot
ice: move VF overflow message count into struct ice_mbx_vf_info
ice: track malicious VFs in new ice_mbx_vf_info structure
ice: convert ice_mbx_clear_malvf to void and use WARN
ice: re-order ice_mbx_reset_snapshot function
====================
Link: https://lore.kernel.org/r/20230313182123.483057-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, kernel would set MSG_CTRUNC flag if msg_control buffer
wasn't provided and SO_PASSCRED was set or if there was pending SCM_RIGHTS.
For some reason we have no corresponding check for SO_PASSSEC.
In the recvmsg(2) doc we have:
MSG_CTRUNC
indicates that some control data was discarded due to lack
of space in the buffer for ancillary data.
So, we need to set MSG_CTRUNC flag for all types of SCM.
This change can break applications those don't check MSG_CTRUNC flag.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Leon Romanovsky <leon@kernel.org>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
v2:
- commit message was rewritten according to Eric's suggestion
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wenjia Zhang says:
====================
smc: Updates 2023-03-01
The 1st patch is to make implements later do not need to adhere to a
specific SEID format. The 2nd patch does some cleanup.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously, v2 support was derived from a very specific format of the SEID
as part of the SMC-D codebase. Make this part of the SMC-D device API, so
implementers do not need to adhere to a specific SEID format.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The GENEVE tunnel used with IFLA_GENEVE_INNER_PROTO_INHERIT is
point-to-point, so set IFF_POINTOPOINT to reflect that.
Signed-off-by: Josef Miegl <josef@miegl.cz>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).
drivers/net/ieee802154/ca8210.c:3174:34: error: ‘ca8210_of_ids’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver will match mostly by DT table (even thought there is regular
ID table) so there is little benefit in of_match_ptr (this also allows
ACPI matching via PRP0001, even though it might not be relevant here).
drivers/net/ieee802154/at86rf230.c:1644:34: error: ‘at86rf230_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver will match mostly by DT table (even thought there is regular
ID table) so there is little benefit in of_match_ptr (this also allows
ACPI matching via PRP0001, even though it might not be relevant here).
drivers/net/ieee802154/mcr20a.c:1340:34: error: ‘mcr20a_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver will match mostly by DT table (even thought there is regular
ID table) so there is little benefit in of_match_ptr (this also allows
ACPI matching via PRP0001, even though it might not be relevant here).
drivers/net/ieee802154/adf7242.c:1322:34: error: ‘adf7242_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver will match mostly by DT table (even thought there is regular
ID table) so there is little benefit in of_match_ptr (this also allows
ACPI matching via PRP0001, even though it might not be relevant here).
drivers/net/phy/spi_ks8995.c:156:34: error: ‘ks8895_spi_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).
drivers/net/dsa/ocelot/ocelot_ext.c:143:34: error: ‘ocelot_ext_switch_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver will match mostly by DT table (even thought there is regular
ID table) so there is little benefit in of_match_ptr (this also allows
ACPI matching via PRP0001, even though it might not be relevant here).
drivers/net/dsa/microchip/ksz9477_i2c.c:84:34: error: ‘ksz9477_dt_ids’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).
drivers/net/dsa/ocelot/seville_vsc9953.c:1070:34: error: ‘seville_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver will match mostly or only by DT table (even thought there is
regular ID table) so there is little benefit in of_match_ptr (this also
allows ACPI matching via PRP0001, even though it might not be relevant
here).
drivers/net/dsa/lan9303_i2c.c:97:34: error: ‘lan9303_i2c_of_match’ defined but not used [-Werror=unused-const-variable=]
drivers/net/dsa/lan9303_mdio.c:157:34: error: ‘lan9303_mdio_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver can be compile tested with !CONFIG_OF making certain data
unused:
drivers/net/dsa/lantiq_gswip.c:1888:34: error: ‘xway_gphy_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver can be compile tested with !CONFIG_OF making certain data
unused:
drivers/nfc/trf7970a.c:2232:34: error: ‘trf7970a_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it is not relevant here).
drivers/net/ethernet/ni/nixge.c:1253:34: error: ‘nixge_dt_ids’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it is not relevant here).
drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c:220:34: error: ‘sxgbe_dt_ids’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it is not relevant here).
drivers/net/ethernet/marvell/pxa168_eth.c:1575:34: error: ‘pxa168_eth_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it is not relevant here).
drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c:72:34: error: ‘dwmac_generic_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver is specific to ARCH_QCOM which depends on OF thus the driver
is OF-only. Its of_device_id table is built unconditionally, thus
of_match_ptr() for ID table does not make sense.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Oleksij Rempel says:
====================
net: dsa: microchip: tc-ets support
changes v3:
- add tc_ets_supported to match supported devices
- dynamically regenerated default TC to queue map.
- add Acked-by to the first patch
changes v2:
- run egress limit configuration on all queue separately. Otherwise
configuration may not apply correctly.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add ETS Qdisc support for KSZ9477 of switches. Current implementation is
limited to strict priority mode.
Tested on KSZ8563R with following configuration:
tc qdisc replace dev lan2 root handle 1: ets strict 4 \
priomap 3 3 2 2 1 1 0 0
ip link add link lan2 name v1 type vlan id 1 \
egress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7
and patched iperf3 version:
https://github.com/esnet/iperf/pull/1476
iperf3 -c 172.17.0.1 -b100M -l1472 -t100 -u -R --sock-prio 2
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet says:
====================
ipv6: optimize rt6_score_route()
This patch series remove an expensive rwlock acquisition
in rt6_check_neigh()/rt6_score_route().
First patch adds missing annotations, and second patch implements
the optimization.
====================
Link: https://lore.kernel.org/r/20230313201732.887488-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rt6_check_neigh() uses read_lock() to protect n->nud_state reading.
This seems overkill and causes false sharing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have many lockless accesses to n->nud_state.
Before adding another one in the following patch,
add annotations to readers and writers.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
