There is a spelling mistake (writeable) in function rxe_check_bind_mw.
Fix it.
Signed-off-by: Zhang Jiaming <jiaming@nfschina.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Expose a steering anchor per priority to allow users to re-inject
packets back into default NIC pipeline for additional processing.
MLX5_IB_METHOD_STEERING_ANCHOR_CREATE returns a flow table ID which
a user can use to re-inject packets at a specific priority.
A FTE (flow table entry) can be created and the flow table ID
used as a destination.
When a packet is taken into a RDMA-controlled steering domain (like
software steering) there may be a need to insert the packet back into
the default NIC pipeline. This exposes a flow table ID to the user that can
be used as a destination in a flow table entry.
With this new method priorities that are exposed to users via
MLX5_IB_METHOD_FLOW_MATCHER_CREATE can be reached from a non-zero UID.
As user-created flow tables (via RDMA DEVX) are created with a non-zero UID
thus it's impossible to point to a NIC core flow table (core driver flow tables
are created with UID value of zero) from userspace.
Create flow tables that are exposed to users with the shared UID, this
allows users to point to default NIC flow tables.
Steering loops are prevented at FW level as FW enforces that no flow
table at level X can point to a table at level lower than X.
Link: https://lore.kernel.org/all/20220703205407.110890-6-saeed@kernel.org/
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Mark Bloch Says:
================
Expose steering anchor
Expose a steering anchor per priority to allow users to re-inject
packets back into default NIC pipeline for additional processing.
MLX5_IB_METHOD_STEERING_ANCHOR_CREATE returns a flow table ID which
a user can use to re-inject packets at a specific priority.
A FTE (flow table entry) can be created and the flow table ID
used as a destination.
When a packet is taken into a RDMA-controlled steering domain (like
software steering) there may be a need to insert the packet back into
the default NIC pipeline. This exposes a flow table ID to the user that can
be used as a destination in a flow table entry.
With this new method priorities that are exposed to users via
MLX5_IB_METHOD_FLOW_MATCHER_CREATE can be reached from a non-zero UID.
As user-created flow tables (via RDMA DEVX) are created with a non-zero UID
thus it's impossible to point to a NIC core flow table (core driver flow tables
are created with UID value of zero) from userspace.
Create flow tables that are exposed to users with the shared UID, this
allows users to point to default NIC flow tables.
Steering loops are prevented at FW level as FW enforces that no flow
table at level X can point to a table at level lower than X.
================
Link: https://lore.kernel.org/all/20220703205407.110890-1-saeed@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The function rxe_create_qp calls rxe_qp_from_init. If some error
occurs, the error handler of function rxe_qp_from_init will set
both scq and rcq to NULL.
Then rxe_create_qp calls rxe_put to handle qp. In the end,
rxe_qp_do_cleanup is called by rxe_put. rxe_qp_do_cleanup directly
accesses scq and rcq before checking them. This will cause
null-ptr-deref error.
The call graph is as below:
rxe_create_qp {
...
rxe_qp_from_init {
...
err1:
...
qp->rcq = NULL; <---rcq is set to NULL
qp->scq = NULL; <---scq is set to NULL
...
}
qp_init:
rxe_put{
...
rxe_qp_do_cleanup {
...
atomic_dec(&qp->scq->num_wq); <--- scq is accessed
...
atomic_dec(&qp->rcq->num_wq); <--- rcq is accessed
}
}
Fixes: 4703b4f0d9 ("RDMA/rxe: Enforce IBA C11-17")
Link: https://lore.kernel.org/r/20220705225414.315478-1-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
If siw_recv_mpa_rr returns -EAGAIN, it means that the MPA reply hasn't
been received completely, and should not report IW_CM_EVENT_CONNECT_REPLY
in this case. This may trigger a call trace in iw_cm. A simple way to
trigger this:
server: ib_send_lat
client: ib_send_lat -R <server_ip>
The call trace looks like this:
kernel BUG at drivers/infiniband/core/iwcm.c:894!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
<...>
Workqueue: iw_cm_wq cm_work_handler [iw_cm]
Call Trace:
<TASK>
cm_work_handler+0x1dd/0x370 [iw_cm]
process_one_work+0x1e2/0x3b0
worker_thread+0x49/0x2e0
? rescuer_thread+0x370/0x370
kthread+0xe5/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
Fixes: 6c52fdc244 ("rdma/siw: connection management")
Link: https://lore.kernel.org/r/dae34b5fd5c2ea2bd9744812c1d2653a34a94c67.1657706960.git.chengyou@linux.alibaba.com
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Since ECC memory maintains a memory system immune to single-bit errors,
add support for correcting the 1bit-ECC error, which prevents a 1bit-ECC
error become an uncorrected type error. When a 1bit-ECC error happens in
the internal ram of the ROCE engine, such as the QPC table, as a 1bit-ECC
error caused by reading, the ROCE engine only corrects those 1bit ECC
errors by writing.
Link: https://lore.kernel.org/r/20220714134353.16700-6-liangwenpeng@huawei.com
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
__qedr_alloc_mr() allocates a memory chunk for "mr->info.pbl_table" with
init_mr_info(). When rdma_alloc_tid() and rdma_register_tid() fail, "mr"
is released while "mr->info.pbl_table" is not released, which will lead
to a memory leak.
We should release the "mr->info.pbl_table" with qedr_free_pbl() when error
occurs to fix the memory leak.
Fixes: e0290cce6a ("qedr: Add support for memory registeration verbs")
Link: https://lore.kernel.org/r/20220714061505.2342759-1-niejianglei2021@163.com
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
removes list_next_or_null_rr_rcu macro to fix below warnings.
That macro is used only twice.
CHECK:MACRO_ARG_REUSE: Macro argument reuse 'head' - possible side-effects?
CHECK:MACRO_ARG_REUSE: Macro argument reuse 'ptr' - possible side-effects?
CHECK:MACRO_ARG_REUSE: Macro argument reuse 'memb' - possible side-effects?
Replaces that macro with an inline function.
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Cc: jinpu.wang@ionos.com
Link: https://lore.kernel.org/r/20220712103113.617754-5-haris.iqbal@ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Setting err_rq_idx_valid field in QP context when the AE source of the
AEQE is not associated with an RQ causes the firmware flush to fail.
Set err_rq_idx_valid field in QP context only if it is associated with an
RQ. Additionally, cleanup the redundant setting of this field in
irdma_process_aeq.
Fixes: 44d9e52977 ("RDMA/irdma: Implement device initialization definitions")
Link: https://lore.kernel.org/r/20220705230815.265-8-shiraz.saleem@intel.com
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Adapt the resource distribution algorithm in irdma_cfg_fpm_val to be more
QP oriented. If the configuration is too big for the available memory,
trim the MR and PBLE's first before trimming the QPs. This also avoids
having to double QPs requested as input to algorithm for GEN1 devices.
Link: https://lore.kernel.org/r/20220705230815.265-5-shiraz.saleem@intel.com
Signed-off-by: Nayan Kumar <nayan.kumar@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add UID field to flow table attributes to allow creating flow tables
with a non default (zero) uid.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Expose the flow table ID to users. This will be used by downstream
patches to allow creating steering rules that point to a flow table ID.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Expose shared_object_to_user_object_allowed, this capability
means an object created with shared UID can point to any UID.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
