Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
If the copier supports a single format on the DAI side we should fixup the BE
dailink to use this single format.
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Rather than keeping a single array of CPU dai link components allocate a
smaller one for each DAI link, this reduces the amount of state that
needs to be passed back and forth in the driver.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
This series implements support for split library loading to comply with the HDA
DMA programming sequence recommendation, which is:
1. DSP side DMA programming and GEN bit set to 1
2. host side DMA programming and RUN bit set to 1
The SOF support for library loading is based on this sequence, backwards
compatibility with older reference firmware is supported (where only the
LOAD_LIBRARY message is supported).
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
These 3 patches update the pm_ops for I2C/SPI so that they are only built
and exported if they are needed.
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Some cleanups from Brent Lu for I2S platforms. And minor additions for
RVPs and Chromebooks.
The code contains a fair amount of state tracking and one part of that
is keeping track of which entry in the large global cpus
snd_soc_dai_link_component array is currently in use. Add a helper
function to allocate a simple DAI link, this simplifies the
code slightly and moves us in the direction of eliminating the need for
the large global cpus array. This does slightly increase the number of
allocations done, but this is probe time and the code already does a
large number of allocations so this increase is small over all.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915075611.1619548-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The compile warning with -Wformat-truncation at
sdw_amd_scan_controller() is false-positive; the max loop size is
AMD_SDW_MAX_MANAGERS (= 2), hence it fits with the given size.
For suppressing the warning, replace snprintf() with scnprintf().
As stated in the above, truncation doesn't matter.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230915082207.26200-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds a control that there are four options to control the digital volume output.
The user could select "immediate" to make volume updates immediately.
In default, the driver selects the volume update with "zero detection + soft inc/dec change".
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20230915020530.83452-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a certain sequence needs to be followed when configuring the HDA
DMA in host and DSP.
The firmware provides a way to handle this two stage sequencing by
splitting the library loading into two stage:
1st stage: LOAD_LIBRARY_PREPARE message
the lib_id is 0, used to configure the DMA on DSP side
2nd stage: LOAD_LIBRARY message
both dma_id and lib_id is valid, used for the actual transfer of
the library
In case a firmware without support for this two stage loading is used then
the second stage message will trigger the loading and the first stage will
return with error, which is ignored by the kernel.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://lore.kernel.org/r/20230915114018.1701-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On Intel platforms there is a strict order requirement for the DMA
programming:
DSP side configures the buffer and sets the GEN bit
Host side sets the RUN bit.
In order to follow this flow, a new global message type has been added to
prepare the DSP side of the DMA:
host sends LOAD_LIBRARY_PREPARE with the dma_id
DSP side sets its buffer and sets the GEN bit
Host sets the RUN bit
Host sends LOAD_LIBRARY with dma_id and lib_id
DSP receives the library data.
It is up to the platform code to use the new prepare stage message and how
to handle the reply to it from the firmware, which can indicate that the
message type is not supported/handled.
In this case the kernel should proceed to the LOAD_LIBRARY stage assuming
a single stage library loading:
host sends LOAD_LIBRARY_PREPARE with the dma_id
DSP replies that the message type is not supported/handled
Host acknowledges the return code and sets the RUN bit
Host sends LOAD_LIBRARY with dma_id and lib_id
DSP receives the library data.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://lore.kernel.org/r/20230915114018.1701-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a copier exposes a single format, we can fixup the BE dailink with
that format. This is helpful when some codec have format restrictions and
e.g. don't support a 32-bit format. In that case, the copier output
formats mirror that restriction in the topology file.
An alternate solution was suggested earlier using a dedicated topology
token. When specified, the token would be used to fix-up the dailink. The
main reason why this solution was chosen is that there is a risk of a
disconnect between token definition and copier format. With a single piece
of information as suggested in this patch, there are fewer risks of a bad
configuration.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230915093507.7242-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
The PCI device registers contain a subsystem ID (SSID), that is
separate from the silicon ID. The PCI specification defines it thus:
"They provide a mechanism for board vendors to distiguish their
boards from one another even thought the boards may have the same
PCI controller on them."
This allows the driver for the silicon part to apply board-speficic
settings based on this SSID.
The CS35L56 driver uses this to select the correct firmware file for
the board. The actual ID is part of the PCI register set of the
host audio interface so this set of patches includes extracting the
SSID from the Intel audio controller and passing it to the machine
driver and then to ASoC components. Other PCI audio controllers
will have the same SSID registers, so can use the same mechanism to
pass the SSID.
There is no need to use temporary strings to construct the kcontrol names,
devm_kasprintf can be used to replace the snprintf + devm_kstrdup pairs.
This change will also fixes the following compiler warning/error (W=1):
sound/soc/codecs/hdac_hdmi.c: In function ‘hdac_hdmi_jack_port_init’:
sound/soc/codecs/hdac_hdmi.c:1793:63: error: ‘ Switch’ directive output may be truncated writing 7 bytes into a region of size between 1 and 32 [-Werror=format-truncation=]
1793 | snprintf(kc_name, sizeof(kc_name), "%s Switch", xname);
| ^~~~~~~
In function ‘create_fill_jack_kcontrols’,
inlined from ‘hdac_hdmi_jack_port_init’ at sound/soc/codecs/hdac_hdmi.c:1871:8:
sound/soc/codecs/hdac_hdmi.c:1793:25: note: ‘snprintf’ output between 8 and 39 bytes into a destination of size 32
1793 | snprintf(kc_name, sizeof(kc_name), "%s Switch", xname);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
The warnings got brought to light by a recent patch upstream:
commit 6d4ab2e97d ("extrawarn: enable format and stringop overflow warnings in W=1")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230913091325.16877-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
