As both modules are core part of Skylake driver and none can live
without the other, combine snd_soc_skl_ipc and snd_soc_skl.
It's highly probable IPC module was to be treated as an interface for
platform specific code implementations e.g.: possibility of existence of
BXT specific code without SKL one. However, most funtionalities are
being inherited from one DSP firmware to another, and thus this
assumption fails.
skl-sst, bxt-sst and cnl-sst are not individuals pointing respectively
to SKL (cAVS 1.5), BXT (cAVS 1.5+) & CNL (cAVS 1.8) standalone
implementations. Code found within these is shared among all platforms
whenever necessary to avoid code duplication and reduce development
burden.
Merge also helps in cleaning up internal code in future changes.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190723145854.8527-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Skylake driver is divided into two modules:
- snd_soc_skl
- snd_soc_skl_ipc
and nothing would be wrong if not for the fact that both cannot exist
without one another. IPC module is not some kind of extension, as it is
the case for snd_hda_ext_core which is separated from snd_hda_core -
legacy hda interface. It's as much core Skylake module as snd_soc_skl
is.
Statement backed up by existence of circular dependency between this
two. To eliminate said problem, struct skl_sst has been created. From
that very momment, Skylake has been plagued by header errors (incomplete
structs, unknown references etc.) whenever something new is to be added
or code is cleaned up.
As this design is being corrected, struct skl_sst is no longer needed,
so combine it with struct skl. To avoid ambiguity when searching for skl
stuff (struct skl *skl) it has also been renamed to skl_dev.
No functional changes.
Signed-off-by: Piotr Maziarz <piotrx.maziarz@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190723145854.8527-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ALSA SoC has many snd_soc_dai_xxx() function which is
using dai->driver->ops->xxx.
But, some of them are implemented as snd_soc_dai_xxx(),
but others are directly using dai->driver->ops->xxx.
Because of it, the code is not easy to read.
This patch creats new soc-dai.c and moves snd_soc_dai_xxx()
functions into it.
One exception is snd_soc_dai_is_dummy() which is based on
soc-utils local variable. We need to keep it as-is there.
Others which is directly using dai->driver->ops->xxx will be
implemented at soc-dai.c by incremental patches.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871ryij1r6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch provides the needed infrastructure to support calling hw_free()
at the DAI level. This is for example required to free resources allocated
in hw_params() callback.
The modification of __rsnd_mod_add_hw_params does not have any side
effects because rsnd_mod_ops::hw_params callback is not used by anyone
until now.
Signed-off-by: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Link: https://lore.kernel.org/r/20190722072403.11008-2-jiada_wang@mentor.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For this bug, there are two capture pcm streams active, with one
stream and its related stream tag released before suspend. Later
when system suspend is done, the stream tag for the remaining
active stream is released by SOF driver. After system resume, hda
codec driver restores the stream tag for the active pcm stream,
but SOF goes to assign a new one, which now doesn't match with the
stream tag used by codec driver, and this causes DMA to fail
receiving data, leading to unrecoverable XRUN condition in FW.
For stream tag is stored in both hda codec and SOF driver, it
shouldn't be released only in SOF driver. This patch just keeps the
stream information in dma data and checks whether there is a stored
DMA data for stream resuming from S3 and restores it. And it also
removes DMA data when the stream is released.
Tested on Whiskey Lake platform.
GitHub issue: https://github.com/thesofproject/sof/issues/1594
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In commit 7d4f606c50 ("ALSA: hda - WAKEEN feature enabling for
runtime pm"), legacy HD-A driver sets hda controller in reset mode after
entering runtime-suspend. And when resuming from suspend mode, it checks
hda controller & codec status to detect headphone hotplug event. Now
this patch does the same job in SOF runtime pm functions.
And we need to check all the non-hdmi codecs for some cases like playback
with HDMI or capture with DMIC connected to dsp. In these cases, only
controller is active and codecs are suspended, so codecs can't send
unsolicited event to controller. The jack polling operation will activate
codecs and unsolicited event can work even codecs become suspended later.
Tested on whiskylake with hda codecs.
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
FW encapsulates information about section types (e.g DRAM, IRAM)
inside module block header. This information can be used in order
to correctly load the section to the appropriate place in memory.
SOF Linux driver needs to know for each platform how to map the
section type with the corresponding memory BAR. So, this patch
introduces get_bar_index, a new operation inside snd_sof_dsp_ops.
Intel platforms, usually load all the section in a contiguous memory
area (usually denoted by sdev->mmio_bar) so things are relatively
simple there. Anyhow, on i.MX8 IRAM and DRAM for example are mapped
to distinct BARs.
By default, if no get_bar function is provided the core implementation
will always return sdev->mmio_bar so that there will be no need for
a change to existing Intel code.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When application goes through SUSPEND/STOP->PREPARE->START
cycle, we should always reprogram the SOF device to start
DMA from a known state so that hw_ptr/appl_ptrs remain valid.
This is expected by ALSA core as it resets the buffer
state as part of prepare (see snd_pcm_do_prepare()).
Fix the issue by forcing reconfiguration of the FW with
STREAM_PCM_PARAMS in prepare(). Use combined logic to handle
prepare and the existing flow to reprogram hw-params after
system suspend.
Without the fix, first call to pcm pointer() will return
an invalid hw_ptr and application may immediately observe XRUN
status, unless "start_threshold" SW parameter is set to maximum
value by the application.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
VAG power control is improved to fit the manual [1]. This patch fixes as
minimum one bug: if customer muxes Headphone to Line-In right after boot,
the VAG power remains off that leads to poor sound quality from line-in.
I.e. after boot:
- Connect sound source to Line-In jack;
- Connect headphone to HP jack;
- Run following commands:
$ amixer set 'Headphone' 80%
$ amixer set 'Headphone Mux' LINE_IN
Change VAG power on/off control according to the following algorithm:
- turn VAG power ON on the 1st incoming event.
- keep it ON if there is any active VAG consumer (ADC/DAC/HP/Line-In).
- turn VAG power OFF when there is the latest consumer's pre-down event
come.
- always delay after VAG power OFF to avoid pop.
- delay after VAG power ON if the initiative consumer is Line-In, this
prevents pop during line-in muxing.
According to the data sheet [1], to avoid any pops/clicks,
the outputs should be muted during input/output
routing changes.
[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf
Cc: stable@vger.kernel.org
Fixes: 9b34e6cc3b ("ASoC: Add Freescale SGTL5000 codec support")
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190719100524.23300-3-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
