Change idle freq clamping back to the direct method, bypassing PM QoS
requests. The problem with using PM QoS requests is they call
(indirectly) the governors ->get_target_freq() which goes thru a
get_dev_status() cycle. The problem comes when the GPU becomes active
again and we remove the idle-clamp request, we go through another
get_dev_status() cycle for the period that the GPU has been idle, which
triggers the governor to lower the target freq excessively.
This partially reverts commit 7c0ffcd40b ("drm/msm/gpu: Respect PM QoS
constraints"), but preserves the use of boost QoS request, so that it
will continue to play nicely with other QoS requests such as a cooling
device. This also mostly undoes commit 78f815c1cf ("drm/msm: return the
average load over the polling period")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/517785/
Link: https://lore.kernel.org/r/20230110231447.1939101-3-robdclark@gmail.com
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
drm-misc-next for v6.3:
UAPI Changes:
* fourcc: Document Open Source user waiver
Cross-subsystem Changes:
* firmware: fix color-format selection for system framebuffers
Core Changes:
* format-helper: Add conversion from XRGB8888 to various sysfb formats;
Make XRGB8888 the only driver-emulated legacy format
* fb-helper: Avoid blank consoles from selecting an incorrect color format
* probe-helper: Enable/disable HPD on connectors plus driver updates
* Use drm_dbg_ helpers in several places
* docs: Document defaults for CRTC backgrounds; Document use of drm_minor
Driver Changes:
* arm/hdlcd: Use new debugfs helpers
* gud: Use new debugfs helpers
* panel: Support Visionox VTDR6130 AMOLED DSI; Support Himax HX8394; Convert
many drivers to common generic DSI write-sequence helper
* v3d: Do not opencode drm_gem_object_lookup()
* vc4: Various HVS an CRTC fixes
* vkms: Fix SEGFAULT from incorrect GEM-buffer mapping
* Convert various drivers to i2c probe_new()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y8ADeSzZDj+tpibF@linux-uq9g
amd-drm-next-6.3-2023-01-13:
amdgpu:
- Fix possible segfault in failure case
- Rework FW requests to happen in early_init for all IPs so
that we don't lose the sbios console if FW is missing
- PSR fixes
- Misc cleanups
- Unload fix
- SMU13 fixes
amdkfd:
- Fix for cleared VRAM BOs
- Fix cleanup if GPUVM creation fails
- Memory accounting fix
- Use resource_size rather than open codeing it
- GC11 mGPU fix
radeon:
- Fix memory leak on shutdown
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230113225911.7776-1-alexander.deucher@amd.com
[Why]
SDMA0_CNTL and MMHUB system aperture related registers are blocked by L1 Policy.
Therefore, they cannot be accessed by VF and loged in violation.
[How]
For MMHUB registers, they will be programmed by PF. So VF will skip to program them in mmhubv3_0.
For SDMA0_CNTL which is a PF_only register, VF don't need to program it in sdma_v6_0.
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some dead code was introduced as part of utilizing the `amdgpu_ucode_*`
helpers. Adjust the control flow to make sure that firmware is released
in the appropriate error flows.
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1530548 ("Control flow issues")
Fixes: ec787deb2d ("drm/amd: Use `amdgpu_ucode_*` helpers for GFX9")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
1. Move dd_link_ddc functions to link_ddc.
2. Move link ddc functions declaration exposed in dc to link.h
3. Move link ddc functions declaration exposed in dm to dc_link.h
4. Remove i2caux_interface.h file
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
FIFO enable sequence is incomplete as it is currently implemented in FW,
and requires reset to prevent the FIFO to be enabled in an invalid
state. This cannot be done until DIG FE is connected to the BE.
[HOW?]
Add FIFO enable sequence in driver for dcn32 with reset after DIG FE is
connected to BE.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The DPIA link encoder (DIG) was not released when a Display XDR 6K
monitor was disconnected. That's because the DPIA link encoder logic
checked the BW when it removed the link encoder for it. And the timing
BW was less than DP link BW. So, it failed to release the link encoder.
And that caused the DIG was occupied and can't be used. The reason it
checked the BW is it wants to identify whether this link was using DIG
or HPO. It skips if it's not DIG.
[How]
Not to check the BW when it removes the link encoder because it's
already in the assignment table, it must be the DIG.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A previous fix attempted to correct mismatch between DM display
targets and dc panel instancing by only counting connected panels.
This behaviour breaks a feature, thus this is an alternative solution
that allows mapping display targets to dc links during mod_power_create.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A logical evaluation already results in bool. There is no need for using
a ternary operator based evaluation and bool conversion of the outcome.
Issue identified using boolconv.cocci Coccinelle semantic patch.
This was also reported by the Kernel Test Robot. Hence
Fixes: 473683a034 ("drm/amd/display: Create a file dedicated for CRTC")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On DCN314 when resuming from s0i3 an ASSERT is shown indicating that
`VBIOSSMC_MSG_SetHardMinDcfclkByFreq` returned `VBIOSSMC_Result_Failed`.
This isn't a driver bug; it's a BIOS/configuration bug. To make this
easier to triage, add an explicit warning when this issue happens.
This matches the behavior utilized for failures with
`VBIOSSMC_MSG_TransferTableDram2Smu` configuration.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Setting scaling does not correctly update CRTC state. As a result
dc stream state's src (composition area) && dest (addressable area)
was not calculated as expected. This causes set scaling doesn's work.
[How]
Correctly update CRTC state when setting scaling property.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: hongao <hongao@uniontech.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is possible that adev->dm.dc->caps.max_links is greater than
AMDGPU_MAX_CRTCS. So, to not potentially access unallocated memory use
adev->mode_info.num_crtc to do the bounds check instead of
adev->dm.dc->caps.max_links.
Fixes: 1b11ff764a ("drm/amd/display: Implement multiple secure display")
Fixes: b8ff7e08ba ("drm/amd/display: Fix when disabling secure_display")
Reviewed-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Using DEFINE_SIMPLE_ATTRIBUTE macro with the debugfs_create_file()
function adds the overhead of introducing a proxy file operation
functions to wrap the original read/write inside file removal protection
functions. This adds significant overhead in terms of introducing and
managing the proxy factory file operations structure and function
wrapping at runtime.
As a replacement, a combination of DEFINE_DEBUGFS_ATTRIBUTE macro paired
with debugfs_create_file_unsafe() is suggested to be used instead. The
DEFINE_DEBUGFS_ATTRIBUTE utilises debugfs_file_get() and
debugfs_file_put() wrappers to protect the original read and write
function calls for the debug attributes. There is no need for any
runtime proxy file operations to be managed by the debugfs core.
Following coccicheck make command helped identify this change:
make coccicheck M=drivers/gpu/drm/i915/ MODE=patch COCCI=./scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci
Signed-off-by: Deepak R Varma <drv@mailo.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5d26e924ec8dea21925c77fa79a2bf2a34cef705.1673451705.git.drv@mailo.com
Using DEFINE_SIMPLE_ATTRIBUTE macro with the debugfs_create_file()
function adds the overhead of introducing a proxy file operation
functions to wrap the original read/write inside file removal protection
functions. This adds significant overhead in terms of introducing and
managing the proxy factory file operations structure and function
wrapping at runtime.
As a replacement, a combination of DEFINE_DEBUGFS_ATTRIBUTE macro paired
with debugfs_create_file_unsafe() is suggested to be used instead. The
DEFINE_DEBUGFS_ATTRIBUTE utilises debugfs_file_get() and
debugfs_file_put() wrappers to protect the original read and write
function calls for the debug attributes. There is no need for any
runtime proxy file operations to be managed by the debugfs core.
Following coccicheck make command helped identify this change:
make coccicheck M=drivers/gpu/drm/i915/ MODE=patch COCCI=./scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci
Signed-off-by: Deepak R Varma <drv@mailo.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9e08dd1b5fabf3e4f54dda27dd1d6ea1dbe6c542.1673451705.git.drv@mailo.com
The caller should more or less know how many DSB commands it
wants to emit into the command buffer, so allow it to specify
the size of the command buffer rather than having the low level
DSB code guess it.
Technically we can emit as many as 134+1033 (for adl+ degamma +
10bit gamma) register writes but thanks to the DSB indexed register
write command we get significant space savings so the current size
estimate of 8KiB (~1024 DSB commands) is sufficient for now.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216003810.13338-11-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
