The AMD XGbE driver currently counts the number of interrupts assigned
to the device by inspecting the pdev->resource array. Since commit
a1a2b7125e ("of/platform: Drop static setup of IRQ resource from DT
core") removed IRQs from this array, the driver now attempts to get all
interrupts from 1 to -1U and gives up probing once it reaches an invalid
interrupt index.
Obtain the number of IRQs with platform_irq_count() instead.
Fixes: a1a2b7125e ("of/platform: Drop static setup of IRQ resource from DT core")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20220609161457.69614-1-jean-philippe@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 6e144b47f5 (octeontx2-pf: Add support for adaptive interrupt coalescing)
Added support for VF interfaces as well.
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CONFIG_64BIT is not sufficient for checking for availability of
iowrite64() and friends.
Also, the out_addr helpers need to be inline.
Fixes: b690f8df64 ("net: axienet: Use iowrite64 to write all 64b descriptor pointers")
Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Chiu says:
====================
net: axienet: fix DMA Tx error
We ran into multiple DMA TX errors while writing files over a network
block device running on top of a DMA-connected AXI Ethernet device on
64-bit RISC-V machines. The errors indicated that the DMA had fetched a
null descriptor and we found that the reason for this is that AXI DMA had
unexpectedly processed a partially updated tail descriptor pointer. To
fix it, we suggest that the driver should use one 64-bit write instead
of two 32-bit writes to perform such update if possible. For those
archectures where double-word load/stores are unavailable, e.g. 32-bit
archectures, force a driver probe failure if the driver finds 64-bit
capability on DMA.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
According to commit f735c40ed9 ("net: axienet: Autodetect 64-bit DMA
capability") and AXI-DMA spec (pg021), on 64-bit capable dma, only
writing MSB part of tail descriptor pointer causes DMA engine to start
fetching descriptors. However, we found that it is true only if dma is in
idle state. In other words, dma would use a tailp even if it only has LSB
updated, when the dma is running.
The non-atomicity of this behavior could be problematic if enough
delay were introduced in between the 2 writes. For example, if an
interrupt comes right after the LSB write and the cpu spends long
enough time in the handler for the dma to get back into idle state by
completing descriptors, then the seconcd write to MSB would treat dma
to start fetching descriptors again. Since the descriptor next to the
one pointed by current tail pointer is not filled by the kernel yet,
fetching a null descriptor here causes a dma internal error and halt
the dma engine down.
We suggest that the dma engine should start process a 64-bit MMIO write
to the descriptor pointer only if ONE 32-bit part of it is written on all
states. Or we should restrict the use of 64-bit addressable dma on 32-bit
platforms, since those devices have no instruction to guarantee the write
to LSB and MSB part of tail pointer occurs atomically to the dma.
initial condition:
curp = x-3;
tailp = x-2;
LSB = x;
MSB = 0;
cpu: |dma:
iowrite32(LSB, tailp) | completes #(x-3) desc, curp = x-3
... | tailp updated
=> irq | completes #(x-2) desc, curp = x-2
... | completes #(x-1) desc, curp = x-1
... | ...
... | completes #x desc, curp = tailp = x
<= irqreturn | reaches tailp == curp = x, idle
iowrite32(MSB, tailp + 4) | ...
| tailp updated, starts fetching...
| fetches #(x + 1) desc, sees cntrl = 0
| post Tx error, halt
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reported-by: Max Hsu <max.hsu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently it is not safe to config the IP as 64-bit addressable on 32-bit
archectures, which cannot perform a double-word store on its descriptor
pointers. The pointer is 64-bit wide if the IP is configured as 64-bit,
and the device would process the partially updated pointer on some
states if the pointer was updated via two store-words. To prevent such
condition, we force a probe fail if we discover that the IP has 64-bit
capability but it is not running on a 64-Bit kernel.
This is a series of patch (1/2). The next patch must be applied in order
to make 64b DMA safe on 64b archectures.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reported-by: Max Hsu <max.hsu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang says:
====================
net: hns3: add some fixes for -net
This series adds some fixes for the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently in driver initialization process, driver will set shapping
parameters of tm port to default speed read from firmware. However, the
speed of SFP module may not be default speed, so shapping parameters of
tm port may be incorrect.
To fix this problem, driver sets new shapping parameters for tm port
after getting exact speed of SFP module in this case.
Fixes: 88d10bd6f7 ("net: hns3: add support for multiple media type")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently hns3 driver misuses the VF rss size to initialize the PF rss size
in hclge_tm_vport_tc_info_update. So this patch fix it by checking the
vport id before initialization.
Fixes: 7347255ea3 ("net: hns3: refactor PF rss get APIs with new common rss get APIs")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, settings parameters of schedule mode, dwrr, shaper of tm
priority or qset of one tc are only be set when tc is enabled, they are
not restored to the default settings when tc is disabled. It confuses
users when they cat tm_priority or tm_qset files of debugfs. So this
patch fixes it.
Fixes: 848440544b ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently tx push is also a ring param. So the original ring param print
info in hns3_is_ringparam_changed should be adjusted.
Fixes: 07fdc163ac ("net: hns3: refactor hns3_set_ringparam()")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's unnecessary to push link state to unalive VF, and the VF will
query link state from PF when it being start works.
Fixes: 18b6e31f8b ("net: hns3: PF add support for pushing link status to VFs")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When modify port base vlan, the port base vlan tbl_sta needs to set to
false before removing old vlan, to indicate this operation is not finish.
Fixes: c0f46de30c ("net: hns3: fix port base vlan add fail when concurrent with reset")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long says:
====================
Documentation: add description for a couple of sctp sysctl options
These are a couple of sysctl options I recently added, but missed adding
documents for them. Especially for net.sctp.intl_enable, it's hard for
users to setup stream interleaving, as it also needs to call some socket
options.
This patchset is to add documents for them.
====================
Link: https://lore.kernel.org/r/cover.1654787716.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Describe it in networking/ip-sysctl.rst like other SCTP options.
Fixes: 2f5268a924 ("sctp: allow users to set netns ecn flag with sysctl")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Describe it in networking/ip-sysctl.rst like other SCTP options.
We need to document this especially as when using the feature
of User Message Interleaving, some socket options also needs
to be set.
Fixes: 463118c34a ("sctp: support sysctl to allow users to use stream interleave")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Describe it in networking/ip-sysctl.rst like other SCTP options.
Fixes: c0d8bab6ae ("sctp: add get and set sockopt for reconf_enable")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-06-09
Grzegorz prevents addition of TC flower filters to TC0 and fixes queue
iteration for VF ADQ to number of actual queues for i40e.
Aleksandr prevents running of ethtool tests when device is being reset
for i40e.
Michal resolves an issue where iavf does not report its MAC address
properly.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: Fix issue with MAC address of VF shown as zero
i40e: Fix call trace in setup_tx_descriptors
i40e: Fix calculating the number of queue pairs
i40e: Fix adding ADQ filter to TC0
====================
Link: https://lore.kernel.org/r/20220609162620.2619258-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull power management fixes from Rafael Wysocki:
"These fix an intel_idle issue introduced during the 5.16 development
cycle and two recent regressions in the system reboot/poweroff code.
Specifics:
- Fix CPUIDLE_FLAG_IRQ_ENABLE handling in intel_idle (Peter Zijlstra)
- Allow all platforms to use the global poweroff handler and make
non-syscall poweroff code paths work again (Dmitry Osipenko)"
* tag 'pm-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle,intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE
kernel/reboot: Fix powering off using a non-syscall code paths
kernel/reboot: Use static handler for register_platform_power_off()
As Liviu pointed out, the arm,malidp-arqos-high-level property
mentioned in the original .txt binding was a mistake, and
arm,malidp-arqos-value needs to take its place.
The binding commit ce6eb0253c ("dt/bindings: display: Add optional
property node define for Mali DP500") mentions the right name in the
commit message, but has the wrong name in the diff.
Commit d298e6a27a ("drm/arm/mali-dp: Add display QoS interface
configuration for Mali DP500") uses the property in the driver, but uses
the shorter name.
Remove the wrong property from the binding, and use the proper name in
the example. The actual property was already documented properly.
Fixes: 2c8b082a3a ("dt-bindings: display: convert Arm Mali-DP to DT schema")
Link: https://lore.kernel.org/linux-arm-kernel/YnumGEilUblhBx8E@e110455-lin.cambridge.arm.com/
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reported-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220609162729.1441760-1-andre.przywara@arm.com
Merge fixes for regressions introduced by the recent rework of the
system reboot/poweroff code.
* pm-sysoff:
kernel/reboot: Fix powering off using a non-syscall code paths
kernel/reboot: Use static handler for register_platform_power_off()
Pull documentation fixes from Jonathan Corbet:
"A few documentation fixes for 5.19, including moving the new HTE docs
to a more suitable location, adding loongarch to the features lists,
and a couple of typo fixes"
* tag 'docs-5.19-3' of git://git.lwn.net/linux:
docs: arm: tcm: Fix typo in description of TCM and MMU usage
docs: Move the HTE documentation to driver-api/
docs: usb: fix literal block marker in usbmon verification example
Documentation/features: Update the arch support status files
Pull arm64 fixes from Catalin Marinas:
- SME save/restore for EFI fix - incorrect logic for detecting the need
for saving/restoring the FFR state.
- SME fix for a CPU ID field value.
- Sysreg generation awk script fix (comparison operator).
- Some typos in documentation or comments and silence a sparse warning
(missing prototype).
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Add kasan_hw_tags_enable() prototype to silence sparse
arm64/sme: Fix EFI save/restore
arm64/fpsimd: Fix typo in comment
arm64/sysreg: Fix typo in Enum element regex
arm64/sme: Fix SVE/SME typo in ABI documentation
arm64/sme: Fix tests for 0b1111 value ID registers
Pull zonefs fixes from Damien Le Moal:
- Fix handling of the explicit-open mount option, and in particular the
conditions under which this option can be ignored.
- Fix a problem with zonefs iomap_begin method, causing a hang in
iomap_readahead() when a readahead request reaches the end of a file.
* tag 'zonefs-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: fix zonefs_iomap_begin() for reads
zonefs: Do not ignore explicit_open with active zone limit
zonefs: fix handling of explicit_open option on mount
Pull ATA fixes from Damien Le Moal:
"Several small fixes for rc2:
- Remove unused field in struct ata_port (Hannes)
- Fix a potential (very unlikely) NULL pointer dereference in
ata_host_alloc_pinfo() (Sergey)
- Fix a device reference leak in the pata_octeon_cf driver (Miaoqian)
- Fixes for handling access to the concurrent positioning ranges log
page used with multi-actuator HDDs (Tyler)
- Fix the values shown by the pio_mode and dma_mode sysfs device
attributes (Sergey)
- Update the MAINTAINERS file to add libata sysfs ABI documentation
file (Sergey)"
* tag 'ata-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
MAINTAINERS: add ATA sysfs file documentation to libata entry
ata: libata-transport: fix {dma|pio|xfer}_mode sysfs files
libata: fix translation of concurrent positioning ranges
libata: fix reading concurrent positioning ranges log
ata: pata_octeon_cf: Fix refcount leak in octeon_cf_probe
ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo()
ata: libata: drop 'sas_last_tag'
Pull sound fixes from Takashi Iwai:
"A collection of fixes; almost all changes are device-specific small
fixes over ASoC, HD-audio and USB-audio. No sign of serious breakage,
so far"
* tag 'sound-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: hda/realtek: Add quirk for HP Dev One
ALSA: hda/realtek - Add HW8326 support
ALSA: hda/conexant - Fix loopback issue with CX20632
ALSA: hda: MTL: add HD Audio PCI ID and HDMI codec vendor ID
ALSA: usb-audio: Set up (implicit) sync for Saffire 6
ALSA: usb-audio: Skip generic sync EP parse for secondary EP
ASoC: wm_adsp: Fix event generation for wm_adsp_fw_put()
ASoC: es8328: Fix event generation for deemphasis control
ASoC: wm8962: Fix suspend while playing music
ASoC: SOF: ipc-msg-injector: Fix reversed if statement
ASoC: SOF: ipc-msg-injector: Propagate write errors correctly
ASoC: fsl_sai: Add support for i.MX8MN
ASoC: SOF: Fix potential NULL pointer dereference
ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo Yoga DuetITL 2021
ASoC: cs42l51: Correct minimum value for SX volume control
ASoC: cs42l56: Correct typo in minimum level for SX volume controls
ASoC: cs42l52: Correct TLV for Bypass Volume
ASoC: cs53l30: Correct number of volume levels on SX controls
ASoC: cs35l36: Update digital volume TLV
ASoC: cs42l52: Fix TLV scales for mixer controls
...
Pull drm fixes from Dave Airlie:
"Not a huge amount here, mainly a bunch of scattered amdgpu fixes, and
then some misc panfrost, bridge/panel ones, and one ast fix for
multi-monitors. Probably pick up a bit more next week like rc3 often
does.
amdgpu:
- DCN 3.1 golden settings fix
- eDP fixes
- DMCUB fixes
- GFX11 fixes and cleanups
- VCN fix for yellow carp
- GMC11 fixes
- RAS fixes
- GPUVM TLB flush fixes
- SMU13 fixes
- VCN3 AV1 regression fix
- VCN2 JPEG fix
- Other misc fixes
amdkfd:
- MMU notifier fix
- Support for more GC 10.3.x families
- Pinned BO handling fix
- Partial migration bug fix
panfrost:
- fix a use after free
ti-sn65dsi83:
- fix invalid DT configuration
panel:
- two self refresh fixes
ast:
- multiple output fix"
* tag 'drm-fixes-2022-06-10' of git://anongit.freedesktop.org/drm/drm: (37 commits)
drm/ast: Support multiple outputs
drm/amdgpu/mes: only invalid/prime icache when finish loading both pipe MES FWs.
drm/amdgpu/jpeg2: Add jpeg vmid update under IB submit
drm/amdgpu: always flush the TLB on gfx8
drm/amdgpu: fix limiting AV1 to the first instance on VCN3
drm/amdkfd:Fix fw version for 10.3.6
drm/amdgpu: Add MODE register to wave debug info in gfx11
Revert "drm/amd/display: Pass the new context into disable OTG WA"
Revert "drm/amdgpu: Ensure the DMA engine is deactivated during set ups"
drm/atomic: Force bridge self-refresh-exit on CRTC switch
drm/bridge: analogix_dp: Support PSR-exit to disable transition
drm/amdgpu: suppress the compile warning about 64 bit type
drm/amd/pm: suppress compile warnings about possible unaligned accesses
drm/amdkfd: Fix partial migration bugs
drm/amdkfd: add pinned BOs to kfd_bo_list
drm/amdgpu: Update PDEs flush TLB if PTB/PDB moved
drm/amdgpu: enable tmz by default for GC 10.3.7
drm/amdkfd: Add GC 10.3.6 and 10.3.7 KFD definitions
drm/amdkfd: Use mmget_not_zero in MMU notifier
drm/amdgpu: Resolve RAS GFX error count issue after cold boot on Arcturus
...
Pull networking fixes from Jakub Kicinski:
"Quick follow up, to cleanly fast-forward net again.
Current release - new code bugs:
- Revert "net/mlx5e: Allow relaxed ordering over VFs"
Previous releases - regressions:
- seg6: fix seg6_lookup_any_nexthop() to handle VRFs using
flowi_l3mdev
Misc:
- rename TLS_INFO_ZC_SENDFILE to better express the meaning"
* tag 'net-5.19-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net:
net: seg6: fix seg6_lookup_any_nexthop() to handle VRFs using flowi_l3mdev
nfp: flower: restructure flow-key for gre+vlan combination
nfp: avoid unnecessary check warnings in nfp_app_get_vf_config
tls: Rename TLS_INFO_ZC_SENDFILE to TLS_INFO_ZC_TX
net/mlx5: fs, fail conflicting actions
net/mlx5: Rearm the FW tracer after each tracer event
net/mlx5: E-Switch, pair only capable devices
net/mlx5e: CT: Fix cleanup of CT before cleanup of TC ct rules
Revert "net/mlx5e: Allow relaxed ordering over VFs"
MAINTAINERS: adjust MELLANOX ETHERNET INNOVA DRIVERS to TLS support removal
This function is only called from assembly, no need for a prototype
declaration in a header file. In addition, add #ifdef around the
function since it is only used when CONFIG_KASAN_HW_TAGS.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: kernel test robot <lkp@intel.com>
Pull xen updates from Juergen Gross:
- a small cleanup removing "export" of an __init function
- a small series adding a new infrastructure for platform flags
- a series adding generic virtio support for Xen guests (frontend side)
* tag 'for-linus-5.19a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: unexport __init-annotated xen_xlate_map_ballooned_pages()
arm/xen: Assign xen-grant DMA ops for xen-grant DMA devices
xen/grant-dma-ops: Retrieve the ID of backend's domain for DT devices
xen/grant-dma-iommu: Introduce stub IOMMU driver
dt-bindings: Add xen,grant-dma IOMMU description for xen-grant DMA ops
xen/virtio: Enable restricted memory access using Xen grant mappings
xen/grant-dma-ops: Add option to restrict memory access under Xen
xen/grants: support allocating consecutive grants
arm/xen: Introduce xen_setup_dma_ops()
virtio: replace arch_has_restricted_virtio_memory_access()
kernel: add platform_has() infrastructure
Pull MIPS fix from Thomas Bogendoerfer:
"Build fix for Loongson-3"
* tag 'mips-fixes_5.19_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Loongson-3: fix compile mips cpu_hwmon as module build error.
The EFI save/restore code is confused. When saving the check for saving
FFR is inverted due to confusion with the streaming mode check, and when
restoring we check if we need to restore FFR by checking the percpu
efi_sm_state without the required wrapper rather than based on the
combination of FA64 support and streaming mode.
Fixes: e0838f6373 ("arm64/sme: Save and restore streaming mode over EFI runtime calls")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220602124132.3528951-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Saeed Mahameed says:
====================
mlx5 fixes 2022-06-08
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2022-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: fs, fail conflicting actions
net/mlx5: Rearm the FW tracer after each tracer event
net/mlx5: E-Switch, pair only capable devices
net/mlx5e: CT: Fix cleanup of CT before cleanup of TC ct rules
Revert "net/mlx5e: Allow relaxed ordering over VFs"
MAINTAINERS: adjust MELLANOX ETHERNET INNOVA DRIVERS to TLS support removal
====================
Link: https://lore.kernel.org/r/20220608185855.19818-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 40867d74c3 ("net: Add l3mdev index to flow struct and avoid oif
reset for port devices") adds a new entry (flowi_l3mdev) in the common
flow struct used for indicating the l3mdev index for later rule and
table matching.
The l3mdev_update_flow() has been adapted to properly set the
flowi_l3mdev based on the flowi_oif/flowi_iif. In fact, when a valid
flowi_iif is supplied to the l3mdev_update_flow(), this function can
update the flowi_l3mdev entry only if it has not yet been set (i.e., the
flowi_l3mdev entry is equal to 0).
The SRv6 End.DT6 behavior in VRF mode leverages a VRF device in order to
force the routing lookup into the associated routing table. This routing
operation is performed by seg6_lookup_any_nextop() preparing a flowi6
data structure used by ip6_route_input_lookup() which, in turn,
(indirectly) invokes l3mdev_update_flow().
However, seg6_lookup_any_nexthop() does not initialize the new
flowi_l3mdev entry which is filled with random garbage data. This
prevents l3mdev_update_flow() from properly updating the flowi_l3mdev
with the VRF index, and thus SRv6 End.DT6 (VRF mode)/DT46 behaviors are
broken.
This patch correctly initializes the flowi6 instance allocated and used
by seg6_lookup_any_nexhtop(). Specifically, the entire flowi6 instance
is wiped out: in case new entries are added to flowi/flowi6 (as happened
with the flowi_l3mdev entry), we should no longer have incorrectly
initialized values. As a result of this operation, the value of
flowi_l3mdev is also set to 0.
The proposed fix can be tested easily. Starting from the commit
referenced in the Fixes, selftests [1],[2] indicate that the SRv6
End.DT6 (VRF mode)/DT46 behaviors no longer work correctly. By applying
this patch, those behaviors are back to work properly again.
[1] - tools/testing/selftests/net/srv6_end_dt46_l3vpn_test.sh
[2] - tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh
Fixes: 40867d74c3 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices")
Reported-by: Anton Makarov <am@3a-alliance.com>
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220608091917.20345-1-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon Horman says:
====================
nfp: fixes for v5.19
this short series includes two fixes for the NFP driver.
1. Restructure GRE+VLAN flower offload to address a miss match
between the NIC firmware and driver implementation which
prevented these features from working in combination.
2. Prevent unnecessary warnings regarding rate limiting support.-
It is expected that this feature to not _always_ be present
but this was not taken into account when the code to check
for this feature was added.
====================
Link: https://lore.kernel.org/r/20220608092901.124780-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Swap around the GRE and VLAN parts in the flow-key offloaded by
the driver to fit in with other tunnel types and the firmware.
Without this change used cases with GRE+VLAN on the outer header
does not get offloaded as the flow-key mismatches what the
firmware expect.
Fixes: 0d630f5898 ("nfp: flower: add support to offload QinQ match")
Fixes: 5a2b930416 ("nfp: flower-ct: compile match sections of flow_payload")
Signed-off-by: Etienne van der Linde <etienne.vanderlinde@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nfp_net_sriov_check is added in nfp_app_get_vf_config which intends
to ensure ivi->vlan_proto and ivi->max_tx_rate/min_tx_rate can be
read from VF config table only when firmware supports corresponding
capability.
However, "nfp_app_get_vf_config" can be called by commands like
"ip a", "ip link set $DEV up" and "ip link set $DEV vf $NUM vlan
$param" (with VF). When using commands above, many warnings
"ndo_set_vf_<cap_x> not supported" would appear if firmware doesn't
support VF rate limit and 802.1ad VLAN assingment. If more VFs are
created, things could get worse.
Thus, this patch add an extra bool parameter for nfp_net_sriov_check
to enable/disable the cap check warning report. Unnecessary warnings
in nfp_app_get_vf_config can be avoided. Valid warnings in kinds of
vf setting function can be reserved.
Fixes: e0d0e1fdf1 ("nfp: VF rate limit support")
Fixes: 59359597b0 ("nfp: support 802.1ad VLAN assingment to VF")
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To embrace possible future optimizations of TLS, rename zerocopy
sendfile definitions to more generic ones:
* setsockopt: TLS_TX_ZEROCOPY_SENDFILE- > TLS_TX_ZEROCOPY_RO
* sock_diag: TLS_INFO_ZC_SENDFILE -> TLS_INFO_ZC_RO_TX
RO stands for readonly and emphasizes that the application shouldn't
modify the data being transmitted with zerocopy to avoid potential
disconnection.
Fixes: c1318b39c7 ("tls: Add opt-in zerocopy mode of sendfile()")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Link: https://lore.kernel.org/r/20220608153425.3151146-1-maximmi@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull ext2, writeback, and quota fixes and cleanups from Jan Kara:
"A fix for race in writeback code and two cleanups in quota and ext2"
* tag 'fs_for_v5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: Prevent memory allocation recursion while holding dq_lock
writeback: Fix inode->i_io_list not be protected by inode->i_lock error
fs: Fix syntax errors in comments
Pull powerpc fixes from Michael Ellerman:
- On 32-bit fix overread/overwrite of thread_struct via ptrace
PEEK/POKE.
- Fix softirqs not switching to the softirq stack since we moved
irq_exit().
- Force thread size increase when KASAN is enabled to avoid stack
overflows.
- On Book3s 64 mark more code as not to be instrumented by KASAN to
avoid crashes.
- Exempt __get_wchan() from KASAN checking, as it's inherently racy.
- Fix a recently introduced crash in the papr_scm driver in some
configurations.
- Remove include of <generated/compile.h> which is forbidden.
Thanks to Ariel Miculas, Chen Jingwen, Christophe Leroy, Erhard Furtner,
He Ying, Kees Cook, Masahiro Yamada, Nageswara R Sastry, Paul Mackerras,
Sachin Sant, Vaibhav Jain, and Wanming Hu.
* tag 'powerpc-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32: Fix overread/overwrite of thread_struct via ptrace
powerpc/book3e: get rid of #include <generated/compile.h>
powerpc/kasan: Force thread size increase with KASAN
powerpc/papr_scm: don't requests stats with '0' sized stats buffer
powerpc: Don't select HAVE_IRQ_EXIT_ON_IRQ_STACK
powerpc/kasan: Silence KASAN warnings in __get_wchan()
powerpc/kasan: Mark more real-mode code as not to be instrumented
