Tony Nguyen says:
====================
ixgbe: bypass devlink phys_port_name generation
Jedrzej adds option to skip phys_port_name generation and opts
ixgbe into it as some configurations rely on pre-devlink naming
which could end up broken as a result.
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ixgbe: prevent from unwanted interface name changes
devlink: let driver opt out of automatic phys_port_name generation
====================
Link: https://patch.msgid.link/20250812205226.1984369-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The data page pool always fills the HW rx ring with pages. On arm64 with
64K pages, this will waste _at least_ 32K of memory per entry in the rx
ring.
Fix by fragmenting the pages if PAGE_SIZE > BNXT_RX_PAGE_SIZE. This
makes the data page pool the same as the header pool.
Tested with iperf3 with a small (64 entries) rx ring to encourage buffer
circulation.
Fixes: cd1fafe7da ("eth: bnxt: add support rx side device memory TCP")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250812182907.1540755-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for *net*:
1) I managed to add a null dereference crash in nft_set_pipapo
in the current development cycle, was not caught by CI
because the avx2 implementation is fine, but selftest
splats when run on non-avx2 host.
2) Fix the ipvs estimater kthread affinity, was incorrect
since 6.14. From Frederic Weisbecker.
3) nf_tables should not allow to add a device to a flowtable
or netdev chain more than once -- reject this.
From Pablo Neira Ayuso. This has been broken for long time,
blamed commit dates from v5.8.
* tag 'nf-25-08-13' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: reject duplicate device on updates
ipvs: Fix estimator kthreads preferred affinity
netfilter: nft_set_pipapo: fix null deref for empty set
====================
Link: https://patch.msgid.link/20250813113800.20775-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A chain/flowtable update with duplicated devices in the same batch is
possible. Unfortunately, netdev event path only removes the first
device that is found, leaving unregistered the hook of the duplicated
device.
Check if a duplicated device exists in the transaction batch, bail out
with EEXIST in such case.
WARNING is hit when unregistering the hook:
[49042.221275] WARNING: CPU: 4 PID: 8425 at net/netfilter/core.c:340 nf_hook_entry_head+0xaa/0x150
[49042.221375] CPU: 4 UID: 0 PID: 8425 Comm: nft Tainted: G S 6.16.0+ #170 PREEMPT(full)
[...]
[49042.221382] RIP: 0010:nf_hook_entry_head+0xaa/0x150
Fixes: 78d9f48f7f ("netfilter: nf_tables: add devices to existing flowtable")
Fixes: b9703ed44f ("netfilter: nf_tables: support for adding new devices to an existing netdev chain")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
The estimator kthreads' affinity are defined by sysctl overwritten
preferences and applied through a plain call to the scheduler's affinity
API.
However since the introduction of managed kthreads preferred affinity,
such a practice shortcuts the kthreads core code which eventually
overwrites the target to the default unbound affinity.
Fix this with using the appropriate kthread's API.
Fixes: d1a8919758 ("kthread: Default affine kthread to its preferred NUMA node")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Blamed commit broke the check for a null scratch map:
- if (unlikely(!m || !*raw_cpu_ptr(m->scratch)))
+ if (unlikely(!raw_cpu_ptr(m->scratch)))
This should have been "if (!*raw_ ...)".
Use the pattern of the avx2 version which is more readable.
This can only be reproduced if avx2 support isn't available.
Fixes: d8d871a35c ("netfilter: nft_set_pipapo: merge pipapo_get/lookup")
Signed-off-by: Florian Westphal <fw@strlen.de>
TLS expects that it owns the receive queue of the TCP socket.
This cannot be guaranteed in case the reader of the TCP socket
entered before the TLS ULP was installed, or uses some non-standard
read API (eg. zerocopy ones). Replace the WARN_ON() and a buggy
early exit (which leaves anchor pointing to a freed skb) with real
error handling. Wipe the parsing state and tell the reader to retry.
We already reload the anchor every time we (re)acquire the socket lock,
so the only condition we need to avoid is an out of bounds read
(not having enough bytes in the socket for previously parsed record len).
If some data was read from under TLS but there's enough in the queue
we'll reload and decrypt what is most likely not a valid TLS record.
Leading to some undefined behavior from TLS perspective (corrupting
a stream? missing an alert? missing an attack?) but no kernel crash
should take place.
Reported-by: William Liu <will@willsroot.io>
Reported-by: Savino Dicanosa <savy@syst3mfailure.io>
Link: https://lore.kernel.org/tFjq_kf7sWIG3A7CrCg_egb8CVsT_gsmHAK0_wxDPJXfIzxFAMxqmLwp3MlU5EHiet0AwwJldaaFdgyHpeIUCS-3m3llsmRzp9xIOBR4lAI=@syst3mfailure.io
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250807232907.600366-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported the following ABBA deadlock:
CPU0 CPU1
---- ----
n_vclocks_store()
lock(&ptp->n_vclocks_mux) [1]
(physical clock)
pc_clock_adjtime()
lock(&clk->rwsem) [2]
(physical clock)
...
ptp_clock_freerun()
ptp_vclock_in_use()
lock(&ptp->n_vclocks_mux) [3]
(physical clock)
ptp_clock_unregister()
posix_clock_unregister()
lock(&clk->rwsem) [4]
(virtual clock)
Since ptp virtual clock is registered only under ptp physical clock, both
ptp_clock and posix_clock must be physical clocks for ptp_vclock_in_use()
to lock &ptp->n_vclocks_mux and check ptp->n_vclocks.
However, when unregistering vclocks in n_vclocks_store(), the locking
ptp->n_vclocks_mux is a physical clock lock, but clk->rwsem of
ptp_clock_unregister() called through device_for_each_child_reverse()
is a virtual clock lock.
Therefore, clk->rwsem used in CPU0 and clk->rwsem used in CPU1 are
different locks, but in lockdep, a false positive occurs because the
possibility of deadlock is determined through lock-class.
To solve this, lock subclass annotation must be added to the posix_clock
rwsem of the vclock.
Reported-by: syzbot+7cfb66a237c4a5fb22ad@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7cfb66a237c4a5fb22ad
Fixes: 73f37068d5 ("ptp: support ptp physical/virtual clocks conversion")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250728062649.469882-1-aha310510@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently when adding devlink port, phys_port_name is automatically
generated within devlink port initialization flow. As a result adding
devlink port support to driver may result in forced changes of interface
names, which breaks already existing network configs.
This is an expected behavior but in some scenarios it would not be
preferable to provide such limitation for legacy driver not being able to
keep 'pre-devlink' interface name.
Add flag no_phys_port_name to devlink_port_attrs struct which indicates
if devlink should not alter name of interface.
Suggested-by: Jiri Pirko <jiri@resnulli.us>
Link: https://lore.kernel.org/all/nbwrfnjhvrcduqzjl4a2jafnvvud6qsbxlvxaxilnryglf4j7r@btuqrimnfuly/
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Steffen Klassert says:
====================
pull request (net): ipsec 2025-08-11
1) Fix flushing of all states in xfrm_state_fini.
From Sabrina Dubroca.
2) Fix some IPsec software offload features. These
got lost with some recent HW offload changes.
From Sabrina Dubroca.
Please pull or let me know if there are problems.
* tag 'ipsec-2025-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
udp: also consider secpath when evaluating ipsec use for checksumming
xfrm: bring back device check in validate_xmit_xfrm
xfrm: restore GSO for SW crypto
xfrm: flush all states in xfrm_state_fini
====================
Link: https://patch.msgid.link/20250811092008.731573-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski says:
====================
net: prevent deadlocks and mis-configuration with per-NAPI threaded config
Running the test added with a recent fix on a driver with persistent
NAPI config leads to a deadlock. The deadlock is fixed by patch 3,
patch 2 is I think a more fundamental problem with the way we
implemented the config.
I hope the fix makes sense, my own thinking is definitely colored
by my preference (IOW how the per-queue config RFC was implemented).
v1: https://lore.kernel.org/20250808014952.724762-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250809001205.1147153-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The following order of calls currently deadlocks if:
- device has threaded=1; and
- NAPI has persistent config with threaded=0.
netif_napi_add_weight_config()
dev->threaded == 1
napi_kthread_create()
napi_enable()
napi_restore_config()
napi_set_threaded(0)
napi_stop_kthread()
while (NAPIF_STATE_SCHED)
msleep(20)
We deadlock because disabled NAPI has STATE_SCHED set.
Creating a thread in netif_napi_add() just to destroy it in
napi_disable() is fairly ugly in the first place. Let's read
both the device config and the NAPI config in netif_napi_add().
Fixes: e6d7626881 ("net: Update threaded state in napi config in netif_set_threaded")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250809001205.1147153-4-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We have to make sure that all future NAPIs will have the right threaded
state when the state is configured on the device level.
We chose not to have an "unset" state for threaded, and not to wipe
the NAPI config clean when channels are explicitly disabled.
This means the persistent config structs "exist" even when their NAPIs
are not instantiated.
Differently put - the NAPI persistent state lives in the net_device
(ncfg == struct napi_config):
,--- [napi 0] - [napi 1]
[dev] | |
`--- [ncfg 0] - [ncfg 1]
so say we a device with 2 queues but only 1 enabled:
,--- [napi 0]
[dev] |
`--- [ncfg 0] - [ncfg 1]
now we set the device to threaded=1:
,---------- [napi 0 (thr:1)]
[dev(thr:1)] |
`---------- [ncfg 0 (thr:1)] - [ncfg 1 (thr:?)]
Since [ncfg 1] was not attached to a NAPI during configuration we
skipped it. If we create a NAPI for it later it will have the old
setting (presumably disabled). One could argue if this is right
or not "in principle", but it's definitely not how things worked
before per-NAPI config..
Fixes: 2677010e77 ("Add support to set NAPI threaded for individual NAPI")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250809001205.1147153-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The test is implicitly assuming the device only has 2 queues.
A real device will likely have more. The exact problem is that
because NAPIs get added to the list from the head, the netlink
dump reports them in reverse order. So the naive napis[0] will
actually likely give us the _last_ NAPI, not the first one.
Re-enable all the NAPIs instead of hard-coding 2 in the test.
This way the NAPIs we operated on will always reappear,
doesn't matter where they were in the registration order.
Fixes: e6d7626881 ("net: Update threaded state in napi config in netif_set_threaded")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250809001205.1147153-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Yao Zi says:
====================
Fix broken link with TH1520 GMAC when linkspeed changes
It's noted that on TH1520 SoC, the GMAC's link becomes broken after
the link speed is changed (for example, running ethtool -s eth0 speed
100 on the peer when negotiated to 1Gbps), but the GMAC could function
normally if the speed is brought back to the initial.
Just like many other SoCs utilizing STMMAC IP, we need to adjust the TX
clock supplying TH1520's GMAC through some SoC-specific glue registers
when linkspeed changes. But it's found that after the full kernel
startup, reading from them results in garbage and writing to them makes
no effect, which is the cause of broken link.
Further testing shows perisys-apb4-hclk must be ungated for normal
access to Th1520 GMAC APB glue registers, which is neither described in
dt-binding nor acquired by the driver.
This series expands the dt-binding of TH1520's GMAC to allow an extra
"APB glue registers interface clock", instructs the driver to acquire
and enable the clock, and finally supplies CLK_PERISYS_APB4_HCLK for
TH1520's GMACs in SoC devicetree.
v2: https://lore.kernel.org/netdev/20250801091240.46114-1-ziyao@disroot.org/
v1: https://lore.kernel.org/all/20250729093734.40132-1-ziyao@disroot.org/
====================
Link: https://patch.msgid.link/20250808093655.48074-2-ziyao@disroot.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It's necessary to adjust the MAC TX clock when the linkspeed changes,
but it's noted such adjustment always fails on TH1520 SoC, and reading
back from APB glue registers that control clock generation results in
garbage, causing broken link.
With some testing, it's found a clock must be ungated for access to APB
glue registers. Without any consumer, the clock is automatically
disabled during late kernel startup. Let's get and enable it if it's
described in devicetree.
For backward compatibility with older devicetrees, probing won't fail if
the APB clock isn't found. In this case, we emit a warning since the
link will break if the speed changes.
Fixes: 33a1a01e3a ("net: stmmac: Add glue layer for T-HEAD TH1520 SoC")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Tested-by: Drew Fustini <fustini@kernel.org>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Link: https://patch.msgid.link/20250808093655.48074-4-ziyao@disroot.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
reset_gpio is claimed in mdiobus_register_device(), but it is not
released in mdiobus_unregister_device(). It is instead only
released when the whole MDIO bus is unregistered.
When a device uses the reset_gpio property, it becomes impossible
to unregister it and register it again, because the GPIO remains
claimed.
This patch resolves that issue.
Fixes: bafbdd527d ("phylib: Add device reset GPIO support") # see notes
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Cc: Csókás Bence <csokas.bence@prolan.hu>
[ csokas.bence: Resolve rebase conflict and clarify msg ]
Signed-off-by: Buday Csaba <buday.csaba@prolan.hu>
Link: https://patch.msgid.link/20250807135449.254254-2-csokas.bence@prolan.hu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
TJA1103/04/20/21 support both C22 and C45 accessing methods.
The TJA11xx driver has implemented the match_phy_device() API.
However, it does not handle the C45 ID. If C45 was used to access
TJA11xx, match_phy_device() would always return false due to
phydev->phy_id only used by C22 being empty, resulting in the
generic phy driver being used for TJA11xx PHYs.
Therefore, check phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] when
using C45.
Fixes: 1b76b2497a ("net: phy: nxp-c45-tja11xx: simplify .match_phy_device OP")
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Link: https://patch.msgid.link/20250807040832.2455306-1-xiaoning.wang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
dwc_eth_dwmac_probe() gets bulk clocks, and then prepares and enables
them. Unfortunately, if dwc_eth_dwmac_config_dt() or stmmac_dvr_probe()
fail, we leave the clocks prepared and enabled. Fix this by using
devm_clk_bulk_get_all_enabled() to combine the steps and provide devm
based release of the prepare and enable state.
This also fixes a similar leakin dwc_eth_dwmac_remove() which wasn't
correctly retrieving the struct plat_stmmacenet_data. This becomes
unnecessary.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: a045e40645 ("net: stmmac: refactor clock management in EQoS driver")
Link: https://patch.msgid.link/E1ukM1X-0086qu-Td@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ksz8873_valid_regs[] was added for register access for KSZ8863/KSZ8873
switches, but the reset register is not in the list so
ksz8_reset_switch() does not take any effect.
Replace regmap_update_bits() using ksz_regmap_8 with ksz_rmw8() so that
an error message will be given if the register is not defined.
A side effect of not resetting the switch is the static MAC table is not
cleared. Further additions to the table will show write error as there
are only 8 entries in the table.
Fixes: d0dec33330 ("net: dsa: microchip: Add register access control for KSZ8873 chip")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250807005453.8306-1-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is possible for a vsock to autobind to VMADDR_PORT_ANY. This can
cause a use-after-free when a connection is made to the bound socket.
The socket returned by accept() also has port VMADDR_PORT_ANY but is not
on the list of unbound sockets. Binding it will result in an extra
refcount decrement similar to the one fixed in fcdd2242c0 (vsock: Keep
the binding until socket destruction).
Modify the check in __vsock_bind_connectible() to also prevent binding
to VMADDR_PORT_ANY.
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Reported-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Budimir Markovic <markovicbudimir@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250807041811.678-1-markovicbudimir@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The variable ret in icss_iep_extts_enable() was incorrectly declared
as u32, while the function returns int and may return negative error
codes. This will cause sign extension issues and incorrect error
propagation. Update ret to be int to fix error handling.
This change corrects the declaration to avoid potential type mismatch.
Fixes: c1e0230eea ("net: ti: icss-iep: Add IEP driver")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250805142323.1949406-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Page pool can have pages "directly" (locklessly) recycled to it,
if the NAPI that owns the page pool is scheduled to run on the same CPU.
To make this safe we check that the NAPI is disabled while we destroy
the page pool. In most cases NAPI and page pool lifetimes are tied
together so this happens naturally.
The queue API expects the following order of calls:
-> mem_alloc
alloc new pp
-> stop
napi_disable
-> start
napi_enable
-> mem_free
free old pp
Here we allocate the page pool in ->mem_alloc and free in ->mem_free.
But the NAPIs are only stopped between ->stop and ->start. We created
page_pool_disable_direct_recycling() to safely shut down the recycling
in ->stop. This way the page_pool_destroy() call in ->mem_free doesn't
have to worry about recycling any more.
Unfortunately, the page_pool_disable_direct_recycling() is not enough
to deal with failures which necessitate freeing the _new_ page pool.
If we hit a failure in ->mem_alloc or ->stop the new page pool has
to be freed while the NAPI is active (assuming driver attaches the
page pool to an existing NAPI instance and doesn't reallocate NAPIs).
Freeing the new page pool is technically safe because it hasn't been
used for any packets, yet, so there can be no recycling. But the check
in napi_assert_will_not_race() has no way of knowing that. We could
check if page pool is empty but that'd make the check much less likely
to trigger during development.
Add page_pool_enable_direct_recycling(), pairing with
page_pool_disable_direct_recycling(). It will allow us to create the new
page pools in "disabled" state and only enable recycling when we know
the reconfig operation will not fail.
Coincidentally it will also let us re-enable the recycling for the old
pool, if the reconfig failed:
-> mem_alloc (new)
-> stop (old)
# disables direct recycling for old
-> start (new)
# fail!!
-> start (old)
# go back to old pp but direct recycling is lost :(
-> mem_free (new)
The new helper is idempotent to make the life easier for drivers,
which can operate in HDS mode and support zero-copy Rx.
The driver can call the helper twice whether there are two pools
or it has multiple references to a single pool.
Fixes: 40eca00ae6 ("bnxt_en: unlink page pool when stopping Rx queue")
Tested-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250805003654.2944974-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When link settings are changed emac->speed is populated by
emac_adjust_link(). The link speed and other settings are then written into
the DRAM. However if both ports are brought down after this and brought up
again or if the operating mode is changed and a firmware reload is needed,
the DRAM is cleared by icssg_config(). As a result the link settings are
lost.
Fix this by calling emac_adjust_link() after icssg_config(). This re
populates the settings in the DRAM after a new firmware load.
Fixes: 9facce84f4 ("net: ti: icssg-prueth: Fix firmware load sequence.")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Message-ID: <20250805173812.2183161-1-danishanwar@ti.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, after modifying device port mode, the np_link_ok state
is immediately checked. At this point, the device may not yet ready,
leading to the querying of an intermediate state.
This patch will poll to check if np_link is ok after
modifying device port mode, and only report np_link_fail upon timeout.
Fixes: e0306637e8 ("net: hibmcge: Add support for mac link exception handling feature")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the network port is down, the queue is released, and ring->len is 0.
In debugfs, hbg_get_queue_used_num() will be called,
which may lead to a division by zero issue.
This patch adds a check, if ring->len is 0,
hbg_get_queue_used_num() directly returns 0.
Fixes: 40735e7543 ("net: hibmcge: Implement .ndo_start_xmit function")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the hibmcge netdev acquires the rtnl_lock in
pci_error_handlers.reset_prepare() and releases it in
pci_error_handlers.reset_done().
However, in the PCI framework:
pci_reset_bus - __pci_reset_slot - pci_slot_save_and_disable_locked -
pci_dev_save_and_disable - err_handler->reset_prepare(dev);
In pci_slot_save_and_disable_locked():
list_for_each_entry(dev, &slot->bus->devices, bus_list) {
if (!dev->slot || dev->slot!= slot)
continue;
pci_dev_save_and_disable(dev);
if (dev->subordinate)
pci_bus_save_and_disable_locked(dev->subordinate);
}
This will iterate through all devices under the current bus and execute
err_handler->reset_prepare(), causing two devices of the hibmcge driver
to sequentially request the rtnl_lock, leading to a deadlock.
Since the driver now executes netif_device_detach()
before the reset process, it will not concurrently with
other netdev APIs, so there is no need to hold the rtnl_lock now.
Therefore, this patch removes the rtnl_lock during the reset process and
adjusts the position of HBG_NIC_STATE_RESETTING to ensure
that multiple resets are not executed concurrently.
Fixes: 3f5a61f6d5 ("net: hibmcge: Add reset supported in this module")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Reinstantiate Florian Westphal as a Netfilter maintainer.
2) Depend on both NETFILTER_XTABLES and NETFILTER_XTABLES_LEGACY,
from Arnd Bergmann.
3) Use id to annotate last conntrack/expectation visited to resume
netlink dump, patches from Florian Westphal.
4) Fix bogus element in nft_pipapo avx2 lookup, introduced in
the last nf-next batch of updates, also from Florian.
5) Return 0 instead of recycling ret variable in
nf_conntrack_log_invalid_sysctl(), introduced in the last
nf-next batch of updates, from Dan Carpenter.
6) Fix WARN_ON_ONCE triggered by syzbot with larger cgroup level
in nft_socket.
* tag 'nf-25-08-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_socket: remove WARN_ON_ONCE with huge level value
netfilter: conntrack: clean up returns in nf_conntrack_log_invalid_sysctl()
netfilter: nft_set_pipapo: don't return bogus extension pointer
netfilter: ctnetlink: remove refcounting in expectation dumpers
netfilter: ctnetlink: fix refcount leak on table dump
netfilter: add back NETFILTER_XTABLES dependencies
MAINTAINERS: resurrect my netfilter maintainer entry
====================
Link: https://patch.msgid.link/20250807112948.1400523-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sabrina Dubroca says:
====================
This series fixes a few issues with GSO. Some recent patches made the
incorrect assumption that GSO is only used by offload. The first two
patches in this series restore the old behavior.
The final patch is in the UDP GSO code, but fixes an issue with IPsec
that is currently masked by the lack of GSO for SW crypto. With GSO,
VXLAN over IPsec doesn't get checksummed.
====================
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Pull networking fixes from Jakub Kicinski:
Previous releases - regressions:
- netlink: avoid infinite retry looping in netlink_unicast()
Previous releases - always broken:
- packet: fix a race in packet_set_ring() and packet_notifier()
- ipv6: reject malicious packets in ipv6_gso_segment()
- sched: mqprio: fix stack out-of-bounds write in tc entry parsing
- net: drop UFO packets (injected via virtio) in udp_rcv_segment()
- eth: mlx5: correctly set gso_segs when LRO is used, avoid false
positive checksum validation errors
- netpoll: prevent hanging NAPI when netcons gets enabled
- phy: mscc: fix parsing of unicast frames for PTP timestamping
- a number of device tree / OF reference leak fixes"
* tag 'net-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
pptp: fix pptp_xmit() error path
net: ti: icssg-prueth: Fix skb handling for XDP_PASS
net: Update threaded state in napi config in netif_set_threaded
selftests: netdevsim: Xfail nexthop test on slow machines
eth: fbnic: Lock the tx_dropped update
eth: fbnic: Fix tx_dropped reporting
eth: fbnic: remove the debugging trick of super high page bias
net: ftgmac100: fix potential NULL pointer access in ftgmac100_phy_disconnect
dt-bindings: net: Replace bouncing Alexandru Tachici emails
dpll: zl3073x: ZL3073X_I2C and ZL3073X_SPI should depend on NET
net/sched: mqprio: fix stack out-of-bounds write in tc entry parsing
Revert "net: mdio_bus: Use devm for getting reset GPIO"
selftests: net: packetdrill: xfail all problems on slow machines
net/packet: fix a race in packet_set_ring() and packet_notifier()
benet: fix BUG when creating VFs
net: airoha: npu: Add missing MODULE_FIRMWARE macros
net: devmem: fix DMA direction on unmapping
ipa: fix compile-testing with qcom-mdt=m
eth: fbnic: unlink NAPIs from queues on error to open
net: Add locking to protect skb->dev access in ip_output
...
Pull more s390 updates from Alexander Gordeev:
- Support MMIO read/write tracing
- Enable THP swapping and THP migration
- Unmask SLCF bit ("stateless command filtering") introduced with CEX8
cards, so that user space applications like lszcrypt could evaluate
and list this feature
- Fix the value of high_memory variable, so it considers possible
tailing offline memory blocks
- Make vmem_pte_alloc() consistent and always allocate memory of
PAGE_SIZE for page tables. This ensures a page table occupies the
whole page, as the rest of the code assumes
- Fix kernel image end address in the decompressor debug output
- Fix a typo in debug_sprintf_format_fn() comment
* tag 's390-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/debug: Fix typo in debug_sprintf_format_fn() comment
s390/boot: Fix startup debugging log
s390/mm: Allocate page table with PAGE_SIZE granularity
s390/mm: Enable THP_SWAP and THP_MIGRATION
s390: Support CONFIG_TRACE_MMIO_ACCESS
s390/mm: Set high_memory at the end of the identity mapping
s390/ap: Unmask SLCF bit in card and queue ap functions sysfs
