This adds the needed backend ops for supporting a backend inerfacing
with an high speed dac. The new ops are:
* data_source_set();
* set_sampling_freq();
* extend_chan_spec();
* ext_info_set();
* ext_info_get().
Also to note the new helpers that are meant to be used by the backends
when extending an IIO channel (adding extended info):
* iio_backend_ext_info_set();
* iio_backend_ext_info_get().
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240419-iio-backend-axi-dac-v4-8-5ca45b4de294@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Adding write support to the buffer-dma code is easy - the write()
function basically needs to do the exact same thing as the read()
function: dequeue a block, read or write the data, enqueue the block
when entirely processed.
Therefore, the iio_buffer_dma_read() and the new iio_buffer_dma_write()
now both call a function iio_buffer_dma_io(), which will perform this
task.
Note that we preemptively reset block->bytes_used to the buffer's size
in iio_dma_buffer_request_update(), as in the future the
iio_dma_buffer_enqueue() function won't reset it.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240419-iio-backend-axi-dac-v4-3-5ca45b4de294@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This brings the DMA buffer API more in line with what we have in the
triggered buffer. There's no need of having both
devm_iio_dmaengine_buffer_setup() and devm_iio_dmaengine_buffer_alloc().
Hence we introduce the new iio_dmaengine_buffer_setup() that together
with devm_iio_dmaengine_buffer_setup() should be all we need.
Note that as part of this change iio_dmaengine_buffer_alloc() is again
static and the axi-adc was updated accordingly.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240419-iio-backend-axi-dac-v4-1-5ca45b4de294@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Both functions `dps310_get_pres_precision` and
`dps310_get_temp_precision` provide the oversampling rate by calling the
`BIT()` macro. However, to look up the corresponding scale factor, we
need the register value itself. Currently, this is achieved by undoing
the calculation of the oversampling rate with `ilog2()`.
Simplify the two functions for getting the scale factor and directly
use the register content for the lookup.
Signed-off-by: Thomas Haemmerle <thomas.haemmerle@leica-geosystems.com>
Link: https://lore.kernel.org/r/20240415105030.1161770-5-thomas.haemmerle@leica-geosystems.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Store pointers to chip info (struct ad5755_chip_info) in driver match
data, instead of enum, so every value will be != 0, populate the
of_device_id table and use it in driver. Even though it is one change,
it gives multiple benefits:
1. Allows to use spi_get_device_match_data() dropping local 'type'
variable.
2. Makes both ID tables usable, so kernel can match via any of these
methods.
3. Code is more obvious as both tables are properly filled.
4. Fixes W=1 warning:
ad5755.c:866:34: error: unused variable 'ad5755_of_match' [-Werror,-Wunused-const-variable]
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240413154511.52576-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Since commit 6020ca4de8 ("iio: adc: ad7944: use spi_optimize_message()"),
The helper functions wrapping spi_sync() for 3-wire and 4-wire modes are
virtually identical. Since gpiod_set_value_cansleep() does a NULL check
internally, we can consolidate the two functions into one and avoid
switch statements at the call sites.
The default cases of the removed switch statement were just to make the
compiler happy and are not reachable since the mode is validated in the
probe function. So removing those should be safe.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240412-ad7944-consolidate-msg-v1-1-7fdeff89172f@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Before all supported sensors except for MPU{9150,9250,9255} were not
allowed to use i2c-gate in the bindings which excluded quite a few
supported sensors where this functionality is supported.
Switch the list of sensors to ones where the Linux driver explicitly
disallows support for the auxiliary bus ("inv_mpu_i2c_aux_bus"). Since
the driver is also based on "default: return true" this should scale
better into the future.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240408-mpu6050-i2c-gate-v1-1-621f051ce7de@z3ntu.xyz
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Switching to the _scoped() version removes the need for manual
calling of fwnode_handle_put() in the paths where the code
exits the loop early. In this case that's all in error paths.
A slightly less convincing usecase than many as all the failure paths
are wrapped up in a call to a per fwnode_handle utility function.
The complexity in that function is sufficient that it makes sense to
factor it out even if it this new auto cleanup would enable simpler
returns if the code was inline at the call site. Hence I've left it alone.
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240330185305.1319844-3-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a setup function implementation to the spi module to enable spi-3wire
when specified in the device-tree. If spi-3wire is not specified in the
device-tree, NULL is returned as bus pre-initialization. This behavior
is identical to the i2c initialization, hence the default initialization.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://lore.kernel.org/r/20240401194906.56810-9-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Provide a way for bus specific pre-configuration by adding a function
pointer argument to the driver core's probe() function, and keep
the driver core implementation bus independent.
In case NULL was passed, a regmap_write() shall initialize all bits of
the data_format register, else regmap_update() is used. In this way
spi and i2c are covered.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://lore.kernel.org/r/20240401194906.56810-6-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace write() data_format by regmap_update_bits() to keep bus specific
pre-configuration which might have happened before on the same register.
The bus specific bits in data_format register then need to be masked out,
Remove the data_range field from the struct adxl345_data, because it is
not used anymore.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://lore.kernel.org/r/20240401194906.56810-2-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
