Some servers (including Samba), support the SMB3.1.1 POSIX Extensions (which use reparse
points for handling special files) but do not properly advertise file system attribute
FILE_SUPPORTS_REPARSE_POINTS. Although we don't check for this attribute flag when
querying special file information, we do check it when creating special files which
causes them to fail unnecessarily. If we have negotiated SMB3.1.1 POSIX Extensions
with the server we can expect the server to support creating special files via
reparse points, and even if the server fails the operation due to really forbidding
creating special files, then it should be no problem and is more likely to return a
more accurate rc in any case (e.g. EACCES instead of EOPNOTSUPP).
Allow creating special files as long as the server supports either reparse points
or the SMB3.1.1 POSIX Extensions (note that if the "sfu" mount option is specified
it uses a different way of storing special files that does not rely on reparse points).
Cc: <stable@vger.kernel.org>
Fixes: 6c06be908c ("cifs: Check if server supports reparse points before using them")
Acked-by: Ralph Boehme <slow@samba.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When a parent lease key is passed to the server during a create operation
while holding a directory lease, the server may not send a lease break to
the client. In such cases, it becomes the client’s responsibility to
ensure cache consistency.
This led to a problem where directory listings (e.g., `ls` or `readdir`)
could return stale results after a new file is created.
eg:
ls /mnt/share/
touch /mnt/share/file1
ls /mnt/share/
In this scenario, the final `ls` may not show `file1` due to the stale
directory cache.
For now, fix this by marking the cached directory as invalid if using
the parent lease key during create, and explicitly closing the cached
directory after successful file creation.
Fixes: 037e1bae58 ("smb: client: use ParentLeaseKey in cifs_do_create")
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The CVE-2024-50047 fix removed asynchronous crypto handling from
crypt_message(), assuming all crypto operations are synchronous.
However, when hardware crypto accelerators are used, this can cause
use-after-free crashes:
crypt_message()
// Allocate the creq buffer containing the req
creq = smb2_get_aead_req(..., &req);
// Async encryption returns -EINPROGRESS immediately
rc = enc ? crypto_aead_encrypt(req) : crypto_aead_decrypt(req);
// Free creq while async operation is still in progress
kvfree_sensitive(creq, ...);
Hardware crypto modules often implement async AEAD operations for
performance. When crypto_aead_encrypt/decrypt() returns -EINPROGRESS,
the operation completes asynchronously. Without crypto_wait_req(),
the function immediately frees the request buffer, leading to crashes
when the driver later accesses the freed memory.
This results in a use-after-free condition when the hardware crypto
driver later accesses the freed request structure, leading to kernel
crashes with NULL pointer dereferences.
The issue occurs because crypto_alloc_aead() with mask=0 doesn't
guarantee synchronous operation. Even without CRYPTO_ALG_ASYNC in
the mask, async implementations can be selected.
Fix by restoring the async crypto handling:
- DECLARE_CRYPTO_WAIT(wait) for completion tracking
- aead_request_set_callback() for async completion notification
- crypto_wait_req() to wait for operation completion
This ensures the request buffer isn't freed until the crypto operation
completes, whether synchronous or asynchronous, while preserving the
CVE-2024-50047 fix.
Fixes: b0abcd65ec ("smb: client: fix UAF in async decryption")
Link: https://lore.kernel.org/all/8b784a13-87b0-4131-9ff9-7a8993538749@huaweicloud.com/
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
A race condition can occur in cifs_oplock_break() leading to a
use-after-free of the cinode structure when unmounting:
cifs_oplock_break()
_cifsFileInfo_put(cfile)
cifsFileInfo_put_final()
cifs_sb_deactive()
[last ref, start releasing sb]
kill_sb()
kill_anon_super()
generic_shutdown_super()
evict_inodes()
dispose_list()
evict()
destroy_inode()
call_rcu(&inode->i_rcu, i_callback)
spin_lock(&cinode->open_file_lock) <- OK
[later] i_callback()
cifs_free_inode()
kmem_cache_free(cinode)
spin_unlock(&cinode->open_file_lock) <- UAF
cifs_done_oplock_break(cinode) <- UAF
The issue occurs when umount has already released its reference to the
superblock. When _cifsFileInfo_put() calls cifs_sb_deactive(), this
releases the last reference, triggering the immediate cleanup of all
inodes under RCU. However, cifs_oplock_break() continues to access the
cinode after this point, resulting in use-after-free.
Fix this by holding an extra reference to the superblock during the
entire oplock break operation. This ensures that the superblock and
its inodes remain valid until the oplock break completes.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220309
Fixes: b98749cac4 ("CIFS: keep FileInfo handle live during oplock break")
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fixes for a few clk drivers and bindings:
- Add a missing property to the Mediatek MT8188 clk binding to
keep binding checks happy
- Avoid an OOB by setting the correct number of parents in
dispmix_csr_clk_dev_data
- Allocate clk_hw structs early in probe to avoid an ordering
issue where clk_parent_data points to an unallocated clk_hw
when the child clk is registered before the parent clk in the
SCMI clk driver
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
dt-bindings: clock: mediatek: Add #reset-cells property for MT8188
clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data
clk: scmi: Handle case where child clocks are initialized before their parents
Pull x86 fixes from Borislav Petkov:
- Update Kirill's email address
- Allow hugetlb PMD sharing only on 64-bit as it doesn't make a whole
lotta sense on 32-bit
- Add fixes for a misconfigured AMD Zen2 client which wasn't even
supposed to run Linux
* tag 'x86_urgent_for_v6.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Update Kirill Shutemov's email address for TDX
x86/mm: Disable hugetlb page table sharing on 32-bit
x86/CPU/AMD: Disable INVLPGB on Zen2
x86/rdrand: Disable RDSEED on AMD Cyan Skillfish
Pull irq fixes from Borislav Petkov:
- Fix a case of recursive locking in the MSI code
- Fix a randconfig build failure in armada-370-xp irqchip
* tag 'irq_urgent_for_v6.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-msi-lib: Fix build with PCI disabled
PCI/MSI: Prevent recursive locking in pci_msix_write_tph_tag()
Pull perf fix from Borislav Petkov:
- Prevent perf_sigtrap() from observing an exiting task and warning
about it
* tag 'perf_urgent_for_v6.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix WARN in perf_sigtrap()
Pull misc fixes from Andrew Morton:
"19 hotfixes. A whopping 16 are cc:stable and the remainder address
post-6.15 issues or aren't considered necessary for -stable kernels.
14 are for MM. Three gdb-script fixes and a kallsyms build fix"
* tag 'mm-hotfixes-stable-2025-07-11-16-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
Revert "sched/numa: add statistics of numa balance task"
mm: fix the inaccurate memory statistics issue for users
mm/damon: fix divide by zero in damon_get_intervals_score()
samples/damon: fix damon sample mtier for start failure
samples/damon: fix damon sample wsse for start failure
samples/damon: fix damon sample prcl for start failure
kasan: remove kasan_find_vm_area() to prevent possible deadlock
scripts: gdb: vfs: support external dentry names
mm/migrate: fix do_pages_stat in compat mode
mm/damon/core: handle damon_call_control as normal under kdmond deactivation
mm/rmap: fix potential out-of-bounds page table access during batched unmap
mm/hugetlb: don't crash when allocating a folio if there are no resv
scripts/gdb: de-reference per-CPU MCE interrupts
scripts/gdb: fix interrupts.py after maple tree conversion
maple_tree: fix mt_destroy_walk() on root leaf node
mm/vmalloc: leave lazy MMU mode on PTE mapping error
scripts/gdb: fix interrupts display after MCP on x86
lib/alloc_tag: do not acquire non-existent lock in alloc_tag_top_users()
kallsyms: fix build without execinfo
Pull erofs fixes from Gao Xiang:
"Fix for a cache aliasing issue by adding missing flush_dcache_folio(),
which causes execution failures on some arm32 setups.
Fix for large compressed fragments, which could be generated by
-Eall-fragments option (but should be rare) and was rejected by
mistake due to an on-disk hardening commit.
The remaining ones are small fixes. Summary:
- Address cache aliasing for mappable page cache folios
- Allow readdir() to be interrupted
- Fix large fragment handling which was errored out by mistake
- Add missing tracepoints
- Use memcpy_to_folio() to replace copy_to_iter() for inline data"
* tag 'erofs-for-6.16-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix large fragment handling
erofs: allow readdir() to be interrupted
erofs: address D-cache aliasing
erofs: use memcpy_to_folio() to replace copy_to_iter()
erofs: fix to add missing tracepoint in erofs_read_folio()
erofs: fix to add missing tracepoint in erofs_readahead()
Pull bcachefs fixes from Kent Overstreet.
* tag 'bcachefs-2025-07-11' of git://evilpiepirate.org/bcachefs:
bcachefs: Don't set BCH_FS_error on transaction restart
bcachefs: Fix additional misalignment in journal space calculations
bcachefs: Don't schedule non persistent passes persistently
bcachefs: Fix bch2_btree_transactions_read() synchronization
bcachefs: btree read retry fixes
bcachefs: btree node scan no longer uses btree cache
bcachefs: Tweak btree cache helpers for use by btree node scan
bcachefs: Fix btree for nonexistent tree depth
bcachefs: Fix bch2_io_failures_to_text()
bcachefs: bch2_fpunch_snapshot()
Pull smb server fixes from Steve French:
- fix use after free in lease break
- small fix for freeing rdma transport (fixes missing logging of
cm_qp_destroy)
- fix write count leak
* tag 'v6.16-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix potential use-after-free in oplock/lease break ack
ksmbd: fix a mount write count leak in ksmbd_vfs_kern_path_locked()
smb: server: make use of rdma_destroy_qp()
Pull PCI fixes from Bjorn Helgaas:
- Track apple Root Ports explicitly and look up the driver data from
the struct device instead of using dev->driver_data, which is used by
pci_host_common_init() for the generic host bridge pointer (Marc
Zyngier)
- Set dev->driver_data before pci_host_common_init() calls
gen_pci_init() because some drivers need it to set up ECAM mappings;
this fixes a regression on MicroChip MPFS Icicle (Geert Uytterhoeven)
- Revert the now-unnecessary use of ECAM pci_config_window.priv to
store a copy of dev->driver_data (Marc Zyngier)
* tag 'pci-v6.16-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
Revert "PCI: ecam: Allow cfg->priv to be pre-populated from the root port device"
PCI: host-generic: Set driver_data before calling gen_pci_init()
PCI: apple: Add tracking of probed root ports
This reverts commit 8c44dac8ad.
I haven't figured out what the actual bug in this commit is, but I did
spend a lot of time chasing it down and eventually succeeded in
bisecting it down to this.
For some reason, this eventpoll commit ends up causing delays and stuck
user space processes, but it only happens on one of my machines, and
only during early boot or during the flurry of initial activity when
logging in.
I must be triggering some very subtle timing issue, but once I figured
out the behavior pattern that made it reasonably reliable to trigger, it
did bisect right to this, and reverting the commit fixes the problem.
Of course, that was only after I had failed at bisecting it several
times, and had flailed around blaming both the drm people and the
netlink people for the odd problems. The most obvious of which happened
at the time of the first graphical login (the most common symptom being
that some gnome app aborted due to a 30s timeout, often leading to the
whole session then failing if it was some critical component like
gnome-shell or similar).
Acked-by: Nam Cao <namcao@linutronix.de>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fragments aren't limited by Z_EROFS_PCLUSTER_MAX_DSIZE. However, if
a fragment's logical length is larger than Z_EROFS_PCLUSTER_MAX_DSIZE
but the fragment is not the whole inode, it currently returns
-EOPNOTSUPP because m_flags has the wrong EROFS_MAP_ENCODED flag set.
It is not intended by design but should be rare, as it can only be
reproduced by mkfs with `-Eall-fragments` in a specific case.
Let's normalize fragment m_flags using the new EROFS_MAP_FRAGMENT.
Reported-by: Axel Fontaine <axel@axelfontaine.com>
Closes: https://github.com/erofs/erofs-utils/issues/23
Fixes: 7c3ca1838a ("erofs: restrict pcluster size limitations")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250711195826.3601157-1-hsiangkao@linux.alibaba.com
Pull block fixes from Jens Axboe:
- MD changes via Yu:
- fix UAF due to stack memory used for bio mempool (Jinchao)
- fix raid10/raid1 nowait IO error path (Nigel and Qixing)
- fix kernel crash from reading bitmap sysfs entry (Håkon)
- Fix for a UAF in the nbd connect error path
- Fix for blocksize being bigger than pagesize, if THP isn't enabled
* tag 'block-6.16-20250710' of git://git.kernel.dk/linux:
block: reject bs > ps block devices when THP is disabled
nbd: fix uaf in nbd_genl_connect() error path
md/md-bitmap: fix GPF in bitmap_get_stats()
md/raid1,raid10: strip REQ_NOWAIT from member bios
raid10: cleanup memleak at raid10_make_request
md/raid1: Fix stack memory use after return in raid1_reshape
Pull io_uring fixes from Jens Axboe:
- Remove a pointless warning in the zcrx code
- Fix for MSG_RING commands, where the allocated io_kiocb
needs to be freed under RCU as well
- Revert the work-around we had in place for the anon inodes
pretending to be regular files. Since that got reworked
upstream, the work-around is no longer needed
* tag 'io_uring-6.16-20250710' of git://git.kernel.dk/linux:
Revert "io_uring: gate REQ_F_ISREG on !S_ANON_INODE as well"
io_uring/msg_ring: ensure io_kiocb freeing is deferred for RCU
io_uring/zcrx: fix pp destruction warnings
Pull more networking fixes from Jakub Kicinski
"Big chunk of fixes for WiFi, Johannes says probably the last for the
release.
The Netlink fixes (on top of the tree) restore operation of iw (WiFi
CLI) which uses sillily small recv buffer, and is the reason for this
'emergency PR'.
The GRE multicast fix also stands out among the user-visible
regressions.
Current release - fix to a fix:
- netlink: make sure we always allow at least one skb to be queued,
even if the recvbuf is (mis)configured to be tiny
Previous releases - regressions:
- gre: fix IPv6 multicast route creation
Previous releases - always broken:
- wifi: prevent A-MSDU attacks in mesh networks
- wifi: cfg80211: fix S1G beacon head validation and detection
- wifi: mac80211:
- always clear frame buffer to prevent stack leak in cases which
hit a WARN()
- fix monitor interface in device restart
- wifi: mwifiex: discard erroneous disassoc frames on STA interface
- wifi: mt76:
- prevent null-deref in mt7925_sta_set_decap_offload()
- add missing RCU annotations, and fix sleep in atomic
- fix decapsulation offload
- fixes for scanning
- phy: microchip: improve link establishment and reset handling
- eth: mlx5e: fix race between DIM disable and net_dim()
- bnxt_en: correct DMA unmap len for XDP_REDIRECT"
* tag 'net-6.16-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
netlink: make sure we allow at least one dump skb
netlink: Fix rmem check in netlink_broadcast_deliver().
bnxt_en: Set DMA unmap len correctly for XDP_REDIRECT
bnxt_en: Flush FW trace before copying to the coredump
bnxt_en: Fix DCB ETS validation
net: ll_temac: Fix missing tx_pending check in ethtools_set_ringparam()
net/mlx5e: Add new prio for promiscuous mode
net/mlx5e: Fix race between DIM disable and net_dim()
net/mlx5: Reset bw_share field when changing a node's parent
can: m_can: m_can_handle_lost_msg(): downgrade msg lost in rx message to debug level
selftests: net: lib: fix shift count out of range
selftests: Add IPv6 multicast route generation tests for GRE devices.
gre: Fix IPv6 multicast route creation.
net: phy: microchip: limit 100M workaround to link-down events on LAN88xx
net: phy: microchip: Use genphy_soft_reset() to purge stale LPA bits
ibmvnic: Fix hardcoded NUM_RX_STATS/NUM_TX_STATS with dynamic sizeof
net: appletalk: Fix device refcount leak in atrtr_create()
netfilter: flowtable: account for Ethernet header in nf_flow_pppoe_proto()
wifi: mac80211: add the virtual monitor after reconfig complete
wifi: mac80211: always initialize sdata::key_list
...
Pull gpio fixes from Bartosz Golaszewski:
- fix performance regression when setting values of multiple GPIO lines
at once
- make sure the GPIO OF xlate code doesn't end up passing an
uninitialized local variable to GPIO core
- update MAINTAINERS
* tag 'gpio-fixes-for-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: remove bouncing address for Nandor Han
gpio: of: initialize local variable passed to the .of_xlate() callback
gpiolib: fix performance regression when using gpio_chip_get_multiple()
Pull power management fix from Rafael Wysocki:
"Fix a coding mistake in a previous fix related to system suspend and
hibernation merged recently"
* tag 'pm-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: Call pm_restore_gfp_mask() after dpm_resume()
Pull dma-mapping fix from Marek Szyprowski:
- small fix relevant to arm64 server and custom CMA configuration (Feng
Tang)
* tag 'dma-mapping-6.16-2025-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-contiguous: hornor the cma address limit setup by user
Commit under Fixes tightened up the memory accounting for Netlink
sockets. Looks like the accounting is too strict for some existing
use cases, Marek reported issues with nl80211 / WiFi iw CLI.
To reduce number of iterations Netlink dumps try to allocate
messages based on the size of the buffer passed to previous
recvmsg() calls. If user space uses a larger buffer in recvmsg()
than sk_rcvbuf we will allocate an skb we won't be able to queue.
Make sure we always allow at least one skb to be queued.
Same workaround is already present in netlink_attachskb().
Alternative would be to cap the allocation size to
rcvbuf - rmem_alloc
but as I said, the workaround is already present in other places.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/9794af18-4905-46c6-b12c-365ea2f05858@samsung.com
Fixes: ae8f160e7e ("netlink: Fix wraparounds of sk->sk_rmem_alloc.")
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711001121.3649033-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We need to allow queuing at least one skb even when skb is
larger than sk->sk_rcvbuf.
The cited commit made a mistake while converting a condition
in netlink_broadcast_deliver().
Let's correct the rmem check for the allow-one-skb rule.
Fixes: ae8f160e7e ("netlink: Fix wraparounds of sk->sk_rmem_alloc.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250711053208.2965945-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Chan says:
====================
bnxt_en: 3 bug fixes
The first one fixes a possible failure when setting DCB ETS.
The second one fixes the ethtool coredump (-W 2) not containing
all the FW traces. The third one fixes the DMA unmap length when
transmitting XDP_REDIRECT packets.
====================
Link: https://patch.msgid.link/20250710213938.1959625-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In bnxt_ets_validate(), the code incorrectly loops over all possible
traffic classes to check and add the ETS settings. Fix it to loop
over the configured traffic classes only.
The unconfigured traffic classes will default to TSA_ETS with 0
bandwidth. Looping over these unconfigured traffic classes may
cause the validation to fail and trigger this error message:
"rejecting ETS config starving a TC\n"
The .ieee_setets() will then fail.
Fixes: 7df4ae9fe8 ("bnxt_en: Implement DCBNL to support host-based DCBX.")
Reviewed-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Shravya KN <shravya.k-n@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250710213938.1959625-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function ll_temac_ethtools_set_ringparam() incorrectly checked
rx_pending twice, once correctly for RX and once mistakenly in place
of tx_pending. This caused tx_pending to be left unchecked against
TX_BD_NUM_MAX.
As a result, invalid TX ring sizes may have been accepted or valid
ones wrongly rejected based on the RX limit, leading to potential
misconfiguration or unexpected results.
This patch corrects the condition to properly validate tx_pending.
Fixes: f7b261bfc3 ("net: ll_temac: Make RX/TX ring sizes configurable")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250710180621.2383000-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
An optimization for promiscuous mode adds a high-priority steering
table with a single catch-all rule to steer all traffic directly to
the TTC table.
However, a gap exists between the creation of this table and the
insertion of the catch-all rule. Packets arriving in this brief window
would miss as no rule was inserted yet, unnecessarily incrementing the
'rx_steer_missed_packets' counter and dropped.
This patch resolves the issue by introducing a new prio for this
table, placing it between MLX5E_TC_PRIO and MLX5E_NIC_PRIO. By doing
so, packets arriving during the window now fall through to the next
prio (at MLX5E_NIC_PRIO) instead of being dropped.
Fixes: 1c46d7409f ("net/mlx5e: Optimize promiscuous mode")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/1752155624-24095-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's a race between disabling DIM and NAPI callbacks using the dim
pointer on the RQ or SQ.
If NAPI checks the DIM state bit and sees it still set, it assumes
`rq->dim` or `sq->dim` is valid. But if DIM gets disabled right after
that check, the pointer might already be set to NULL, leading to a NULL
pointer dereference in net_dim().
Fix this by calling `synchronize_net()` before freeing the DIM context.
This ensures all in-progress NAPI callbacks are finished before the
pointer is cleared.
Kernel log:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
RIP: 0010:net_dim+0x23/0x190
...
Call Trace:
<TASK>
? __die+0x20/0x60
? page_fault_oops+0x150/0x3e0
? common_interrupt+0xf/0xa0
? sysvec_call_function_single+0xb/0x90
? exc_page_fault+0x74/0x130
? asm_exc_page_fault+0x22/0x30
? net_dim+0x23/0x190
? mlx5e_poll_ico_cq+0x41/0x6f0 [mlx5_core]
? sysvec_apic_timer_interrupt+0xb/0x90
mlx5e_handle_rx_dim+0x92/0xd0 [mlx5_core]
mlx5e_napi_poll+0x2cd/0xac0 [mlx5_core]
? mlx5e_poll_ico_cq+0xe5/0x6f0 [mlx5_core]
busy_poll_stop+0xa2/0x200
? mlx5e_napi_poll+0x1d9/0xac0 [mlx5_core]
? mlx5e_trigger_irq+0x130/0x130 [mlx5_core]
__napi_busy_loop+0x345/0x3b0
? sysvec_call_function_single+0xb/0x90
? asm_sysvec_call_function_single+0x16/0x20
? sysvec_apic_timer_interrupt+0xb/0x90
? pcpu_free_area+0x1e4/0x2e0
napi_busy_loop+0x11/0x20
xsk_recvmsg+0x10c/0x130
sock_recvmsg+0x44/0x70
__sys_recvfrom+0xbc/0x130
? __schedule+0x398/0x890
__x64_sys_recvfrom+0x20/0x30
do_syscall_64+0x4c/0x100
entry_SYSCALL_64_after_hwframe+0x4b/0x53
...
---[ end trace 0000000000000000 ]---
...
---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
Fixes: 445a25f6e1 ("net/mlx5e: Support updating coalescing configuration without resetting channels")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/1752155624-24095-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marc Kleine-Budde says:
====================
pull-request: can 2025-07-11
Sean Nyekjaer's patch targets the m_can driver and demotes the "msg
lost in rx" message to debug level to prevent flooding the kernel log
with error messages.
* tag 'linux-can-fixes-for-6.16-20250711' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: m_can: m_can_handle_lost_msg(): downgrade msg lost in rx message to debug level
====================
Link: https://patch.msgid.link/20250711102451.2828802-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
drm-misc-fixes for v6.16-rc6 or final:
- Fix nouveau fail on debugfs errors.
- Magic 50 ms to fix nouveau suspend.
- Call rust destructor on drm device release.
- Fix DMA api error handling in tegra/nvdec.
- Fix PVR device reset.
- Habanalabs maintainer update.
- Small memory leak fix when nouveau acpi init fails.
- Do not attempt to bind to any PCI device with AGP capability.
- Make FB's acquire handles on backing object, same as i915/xe already does.
- Fix race in drm_gem_handle_create_tail.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e522cdc7-1787-48f2-97e5-0f94783970ab@linux.intel.com
Driver Changes:
- Clear LMTT page to avoid leaking data from one VF to another
- Align PF queue size to power of 2
- Disable Indirect Ring State to avoid intermittent issues on context
switch: feature is not currently needed, so can be disabled for now.
- Fix compression handling when the BO pages are very fragmented
- Restore display pm on error path
- Fix runtime pm handling in xe devcoredump
- Fix xe_pm_set_vram_threshold() doc
- Recommend new minor versions of GuC firmware
- Drop some workarounds on VF
- Do not use verbose GuC logging by default: it should be only for
debugging
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/s6jyd24mimbzb4vxtgc5vupvbyqplfep2c6eupue7znnlbhuxy@lmvzexfzhrnn
Currently xe sets the guc log level to a verbose level since it's useful
to debug hangs and general development. However the verbose level may
already be too much and affect performance.
Michal Mrozek did some tests with the L0 compute stack for submission
latency with ULLS disabled. Below are the normalized numbers with log
level 3 (the current default) as baseline for each test:
Test \ Log Level 3 0 1 2
----------------------------------------------------------- ------ ------ ------ ------
BestWalkerNthCommandListSubmission(CmdListCount=2) 1.00 0.63 0.63 0.96
BestWalkerNthSubmission(KernelCount=2) 1.00 0.62 0.63 0.96
BestWalkerNthSubmissionImmediate(KernelCount=2) 1.00 0.58 0.58 0.85
BestWalkerSubmission 1.00 0.62 0.62 0.96
BestWalkerSubmissionImmediate 1.00 0.63 0.62 0.96
BestWalkerSubmissionImmediateMultiCmdlists(cmdlistCount=2) 1.00 0.58 0.58 0.86
BestWalkerSubmissionImmediateMultiCmdlists(cmdlistCount=4) 1.00 0.70 0.70 0.83
BestWalkerSubmissionImmediateMultiCmdlists(cmdlistCount=8) 1.00 0.53 0.52 0.78
Log level 2 is the first "verbose level" for GuC, where the biggest
difference happens. Keep log level 3 for CONFIG_DRM_XE_DEBUG, but switch
to 1, i.e. GUC_LOG_LEVEL_NON_VERBOSE, for "normal" builds.
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250613-guc-log-level-v2-1-cb84a63e49fe@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit a37128ba61)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
I got the following warning when writing other tests:
+ handle_test_result_pass 'bond 802.3ad' '(lacp_active off)'
+ local 'test_name=bond 802.3ad'
+ shift
+ local 'opt_str=(lacp_active off)'
+ shift
+ log_test_result 'bond 802.3ad' '(lacp_active off)' ' OK '
+ local 'test_name=bond 802.3ad'
+ shift
+ local 'opt_str=(lacp_active off)'
+ shift
+ local 'result= OK '
+ shift
+ local retmsg=
+ shift
/net/tools/testing/selftests/net/forwarding/../lib.sh: line 315: shift: shift count out of range
This happens because an extra shift is executed even after all arguments
have been consumed. Remove the last shift in log_test_result() to avoid
this warning.
Fixes: a923af1cee ("selftests: forwarding: Convert log_test() to recognize RET values")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250709091244.88395-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guillaume Nault says:
====================
gre: Fix default IPv6 multicast route creation.
When fixing IPv6 link-local address generation on GRE devices with
commit 3e6a0243ff ("gre: Fix again IPv6 link-local address
generation."), I accidentally broke the default IPv6 multicast route
creation on these GRE devices.
Fix that in patch 1, making the GRE specific code yet a bit closer to
the generic code used by most other network interface types.
Then extend the selftest in patch 2 to cover this case.
====================
Link: https://patch.msgid.link/cover.1752070620.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous patch fixes a bug that prevented the creation of the
default IPv6 multicast route (ff00::/8) for some GRE devices. Now let's
extend the GRE IPv6 selftests to cover this case.
Also, rename check_ipv6_ll_addr() to check_ipv6_device_config() and
adapt comments and script output to take into account the fact that
we're not limited to link-local address generation.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/65a89583bde3bf866a1922c2e5158e4d72c520e2.1752070620.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
