When running on a Cherryview, or on a Broxton with VTD enabled, pinning of
a VMA to GGTT is now committed asynchronously to avoid lock inversion
among reservation_ww and cpu_hotplug locks, the latter acquired from
stop_machine(). That may defer further processing of resources that
depend on that VMA. As a consequence, a 10ms delay in a multithreaded
migrate test case may occur too short and still incomplete threads may be
interrupted, and the test case may fail with -ERESTARTSYS or -EINTR error
code returned by any of those threads.
Extend the delay to empirically determined 100ms on affected platforms.
v3: Add an in-line comment that explains why 100ms (Andi).
v2: Fix spelling (Sebastian, Krzysztof),
- explain why VMA pinning is commited asynchronously on CHV/BXT+VTD
(Krzysztof).
Cc: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Acked-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20251023082925.351307-7-janusz.krzysztofik@linux.intel.com
When tick values are large, the multiplication by NSEC_PER_SEC is larger
than 64 bits and results in bad conversions.
The issue is seen in PMU busyness counters that look like they have
wrapped around due to bad conversion. i915 PMU implementation returns
monotonically increasing counters. If a count is lesser than previous
one, it will only return the larger value until the smaller value
catches up. The user will see this as zero delta between two
measurements even though the engines are busy.
Fix it by using mul_u64_u32_div()
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14955
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://lore.kernel.org/r/20251016000350.1152382-2-umesh.nerlige.ramappa@intel.com
Backmerge in order to get the commit:
048832a3f4 ("drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter")
To drm-intel-gt-next as there are followup fixes to be applied.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
New feature
- Add glue layer support for Exynos7870 DSIM in Exynos DSI driver
. Introduces Exynos7870 DSIM bridge integration at Exynos DRM DSI layer.
Bug fixups for exynos7_drm_decon.c module
- Remove redundant ctx->suspended state handling
. Cleans up unused state check logic as call flow is now correctly managed.
. Fixes an issue where decon_commit() was blocked from decon_atomic_enable() due to incorrect state setting.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://lore.kernel.org/r/20250915113543.51294-1-inki.dae@samsung.com
New feature
- Add DSIM bridge driver support for Exynos7870
. Introduces Exynos7870 DSIM IP block support in the samsung-dsim bridge driver.
- Document Exynos7870 DSIM compatible in dt-bindings
. Adds exynos7870 compatible string and required clocks in device tree schema.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://lore.kernel.org/r/20250915111802.28177-1-inki.dae@samsung.com
Changes for v6.18
GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a663 speedbins
- a623 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- various fixes
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
- DSI PHY fixes, correcting programming glitches
- misc small fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <rob.clark@oss.qualcomm.com>
Link: https://lore.kernel.org/r/CACSVV01FgXN+fD6U1Hi6Tj4WCf=V-+NO8BXi+80iS4qOZwpaGg@mail.gmail.com
Condition guards are found to be redundant, as the call flow is properly
managed now, as also observed in the Exynos5433 DECON driver. Since
state checking is no longer necessary, remove it.
This also fixes an issue which prevented decon_commit() from
decon_atomic_enable() due to an incorrect state change setting.
Fixes: 96976c3d9a ("drm/exynos: Add DECON driver")
Cc: stable@vger.kernel.org
Suggested-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Add support for Exynos7870's DSIM IP block in the bridge driver.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Presently, all devices refer to clock names from a single array. The
only controlling parameter is the number of clocks (num_clks field of
samsung_dsim_driver_data) which uses the first n clocks of that array.
As new devices are added, this approach turns out to be cumbersome.
Separate the clock names in individual arrays required by each variant,
in a struct clk_bulk_data. Add a pointer field to the driver data struct
which points to their respective clock names, and rework the clock usage
code to use the clk_bulk_* API instead.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos7870's DSIM requires more time to stabilize its PLL. The current
timeout value, 1000, doesn't suffice. Increase the value to 3000, which
is just about enough as observed experimentally.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The PLL_STABLE bit of DSIM_DPHY_STATUS is hardcoded to BIT(31), but
Exynos7870's DSIM has it in BIT(24) as per downstream kernel sources.
In order to support both, move this bit value to the driver data struct
and define it for every driver compatible. Reference the value from
there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Currently, PLL_P offset of DSIM_PLLCTRL is configurable in the driver
data, while PLL_M and PLL_S offsets are hardcoded as 4-bit and 1-bit
offsets respectively, but Exynos7870's DSIM have them at 3-bit and 0-bit
offsets as per downstream kernel sources.
In order to support both, move both offset values to the driver data
struct and define it for every driver compatible. Reference the values
from there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The VIDEO_MODE bit of DSIM_CONFIG is hardcoded to BIT(25), but
Exynos7870's DSIM has it in BIT(18) as per downstream kernel sources.
In order to support both, move this bit value to the driver data struct
and define it for every driver compatible. Reference the value from
there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The MAIN_VSA offset of DSIM_MSYNC is hardcoded to a 22-bit offset, but
Exynos7870's DSIM has it in a 16-bit offset as per the downstream kernel
sources.
In order to support both, move this offset value to the driver data
struct and define it for every driver compatible. Reference the value
from there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
DSIM_CLKCTRL bit and offset values hardcoded in the driver:
name | bit/offset value
--------------------------+-----------------
DSIM_LANE_ESC_CLK_EN_CLK | 19
DSIM_LANE_ESC_CLK_EN_DATA | 20
DSIM_BYTE_CLKEN | 24
DSIM_ESC_CLKEN | 28
DSIM_TX_REQUEST_HSCLK | 31
DSIM_CLKCTRL bit and offset values in Exynos7870 DSIM as per downstream
kernel sources:
name | bit/offset value
--------------------------+-----------------
DSIM_LANE_ESC_CLK_EN_CLK | 8
DSIM_LANE_ESC_CLK_EN_DATA | 9
DSIM_BYTE_CLKEN | 17
DSIM_ESC_CLKEN | 16
DSIM_TX_REQUEST_HSCLK | 20
In order to support both, move all values to the driver data struct and
define it for every driver compatible. Reference the values from there
instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos7870's DSIM device doesn't require waiting for the header FIFO
during a MIPI DSI transfer. Add a flag in the driver data in order to
control said behavior.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com
On Exynos7870 devices, enabling the display requires disabling
standby by writing to the SFRCTRL register. Add the register and related
bit values. Since this behavior isn't available on other SoCs, implement
a flag in the driver data struct indicating the availability of this
feature.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos7870's DSIM has separate registers for LINK and DPHY status. This
is in contrast to older variants in the driver which use a single
register for both.
Add a driver data flag which indicates that the device variant supports
the legacy status register. Change the register read calls
appropriately.
Suggested-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
If GuC hangs, the GuC logs might not contain enough information to
understand exactly why the hang occurred. In this case, we need to
look at the GuC HW state to try to understand where the GuC is stuck. It
is therefore useful to include the GuC HW state in the error capture.
The list of registers that are part of the GuC HW state can change based
on platform, but it is the same for all platforms from TGL to MTL so we
only need to support one version for i915.
v2: revised list
v3: remove confusing comment, use sizeof(u32) instead of 4 (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250909223621.3782625-2-daniele.ceraolospurio@intel.com
Before exporting a buffer, make sure it has been populated with
pages at least once.
While discussing cgroups we noticed a problem where you could export
a BO to a dma-buf without having it ever being backed or accounted for.
This meant in low memory situations or eventually with cgroups, a
lower privledged process might cause the compositor to try and allocate
a lot of memory on it's behalf and this could fail. At least make
sure the exporter has managed to allocate the RAM at least once
before exporting the object.
This only applies currently to TTM_PL_SYSTEM objects, because
GTT objects get populated on first validate, and VRAM doesn't
use TT.
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/r/20250904021643.2050497-4-airlied@gmail.com
Before exporting a buffer, make sure it has been populated with
pages at least once.
While discussing cgroups we noticed a problem where you could export
a BO to a dma-buf without having it ever being backed or accounted for.
This meant in low memory situations or eventually with cgroups, a
lower privledged process might cause the compositor to try and allocate
a lot of memory on it's behalf and this could fail. At least make
sure the exporter has managed to allocate the RAM at least once
before exporting the object.
This only applies currently to TTM_PL_SYSTEM objects, because
GTT objects get populated on first validate, and VRAM doesn't
use TT.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/r/20250904021643.2050497-3-airlied@gmail.com
Before exporting a buffer, make sure it has been populated with
pages at least once.
While discussing cgroups we noticed a problem where you could export
a BO to a dma-buf without having it ever being backed or accounted for.
This meant in low memory situations or eventually with cgroups, a
lower privledged process might cause the compositor to try and allocate
a lot of memory on it's behalf and this could fail. At least make
sure the exporter has managed to allocate the RAM at least once
before exporting the object.
This only applies currently to TTM_PL_SYSTEM objects, because
GTT objects get populated on first validate, and VRAM doesn't
use TT.
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/r/20250904021643.2050497-2-airlied@gmail.com
While discussing cgroups we noticed a problem where you could export
a BO to a dma-buf without having it ever being backed or accounted for.
This meant in low memory situations or eventually with cgroups, a
lower privledged process might cause the compositor to try and allocate
a lot of memory on it's behalf and this could fail. At least make
sure the exporter has managed to allocate the RAM at least once
before exporting the object.
This only applies currently to TTM_PL_SYSTEM objects, because
GTT objects get populated on first validate, and VRAM doesn't
use TT.
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/r/20250904021643.2050497-1-airlied@gmail.com
The upstream mesa copy of the GPU regs has shifted more things to reg64
instead of seperate 32b HI/LO reg32's. This works better with the "new-
style" c++ builders that mesa has been migrating to for a6xx+ (to better
handle register shuffling between gens), but it leaves the C builders
with missing _HI/LO builders.
So handle the special case of reg64, automatically generating the
missing _HI/LO builders.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/673559/
Since these generated files are no longer checked in, either in mesa or
in the linux kernel, simplify things by dropping the verbose generated
comment.
These were semi-nerf'd on the kernel side, in the name of build
reproducibility, by commit ba64c6737f ("drivers: gpu: drm: msm:
registers: improve reproducibility"), but in a way that was semi-
kernel specific. We can just reduce the divergence between kernel
and mesa by just dropping all of this.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/673551/
On systems with multiple GPUs there can be uncertainty which GPU is the
primary one used to drive the display at bootup. In some desktop
environments this can lead to increased power consumption because
secondary GPUs may be used for rendering and never go to a low power
state. In order to disambiguate this add a new sysfs attribute
'boot_display' that uses the output of video_is_primary_device() to
populate whether the PCI device was used for driving the display.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://gitlab.freedesktop.org/xorg/lib/libpciaccess/-/issues/23
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250811162606.587759-5-superm1@kernel.org
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
There is no reason to require this to happen on first submitted IB only.
We need to wait for the queue to be idle, but it can be done at any
time (including when there are multiple video sessions active).
Signed-off-by: David Rosca <david.rosca@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8908fdce06)
Cc: stable@vger.kernel.org
