Add support to get/set embedded sync for both input and output pins.
The DPLL is able to lock on input reference when the embedded sync
frequency is 1 PPS and pulse width 25%. The esync on outputs are more
versatille and theoretically supports any esync frequency that divides
current output frequency but for now support the same that supported on
input pins (1 PPS & 25% pulse).
Note that for the output pins the esync divisor shares the same register
used for N-divided signal formats. Due to this the esync cannot be
enabled on outputs configured with one of the N-divided signal formats.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Prathosh Satish <prathosh.satish@microchip.com>
Co-developed-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20250715144633.149156-2-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Johannes Berg says:
====================
Another set of changes, notably:
- cfg80211: fix double-free introduced earlier
- mac80211: fix RCU iteration in CSA
- iwlwifi: many cleanups (unused FW APIs, PCIe code, WoWLAN)
- mac80211: some work around how FIPS affects wifi, which was
wrong (RC4 is used by TKIP, not only WEP)
- cfg/mac80211: improvements for unsolicated probe response
handling
* tag 'wireless-next-2025-07-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (64 commits)
wifi: cfg80211: fix double free for link_sinfo in nl80211_station_dump()
wifi: cfg80211: fix off channel operation allowed check for MLO
wifi: mac80211: use RCU-safe iteration in ieee80211_csa_finish
wifi: mac80211_hwsim: Update comments in header
wifi: mac80211: parse unsolicited broadcast probe response data
wifi: cfg80211: parse attribute to update unsolicited probe response template
wifi: mac80211: don't use TPE data from assoc response
wifi: mac80211: handle WLAN_HT_ACTION_NOTIFY_CHANWIDTH async
wifi: mac80211: simplify __ieee80211_rx_h_amsdu() loop
wifi: mac80211: don't mark keys for inactive links as uploaded
wifi: mac80211: only assign chanctx in reconfig
wifi: mac80211_hwsim: Declare support for AP scanning
wifi: mac80211: clean up cipher suite handling
wifi: mac80211: don't send keys to driver when fips_enabled
wifi: cfg80211: Fix interface type validation
wifi: mac80211: remove ieee80211_link_unreserve_chanctx() return value
wifi: mac80211: don't unreserve never reserved chanctx
mwl8k: Add missing check after DMA map
wifi: mac80211: make VHT opmode NSS ignore a debug message
wifi: iwlwifi: remove support of several iwl_ppag_table_cmd versions
...
====================
Link: https://patch.msgid.link/20250717094610.20106-47-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tony Nguyen says:
====================
Add RDMA support for Intel IPU E2000 in idpf
Tatyana Nikolova says:
This idpf patch series is the second part of the staged submission for
introducing RDMA RoCEv2 support for the IPU E2000 line of products,
referred to as GEN3.
To support RDMA GEN3 devices, the idpf driver uses common definitions
of the IIDC interface and implements specific device functionality in
iidc_rdma_idpf.h.
The IPU model can host one or more logical network endpoints called
vPorts per PCI function that are flexibly associated with a physical
port or an internal communication port.
Other features as it pertains to GEN3 devices include:
* MMIO learning
* RDMA capability negotiation
* RDMA vectors discovery between idpf and control plane
These patches are split from the submission "Add RDMA support for Intel
IPU E2000 (GEN3)" [1]. The patches have been tested on a range of hosts
and platforms with a variety of general RDMA applications which include
standalone verbs (rping, perftest, etc.), storage and HPC applications.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
[1] https://lore.kernel.org/all/20240724233917.704-1-tatyana.e.nikolova@intel.com/
This idpf patch series is the second part of the staged submission for
introducing RDMA RoCEv2 support for the IPU E2000 line of products,
referred to as GEN3.
To support RDMA GEN3 devices, the idpf driver uses common definitions
of the IIDC interface and implements specific device functionality in
iidc_rdma_idpf.h.
The IPU model can host one or more logical network endpoints called
vPorts per PCI function that are flexibly associated with a physical
port or an internal communication port.
Other features as it pertains to GEN3 devices include:
* MMIO learning
* RDMA capability negotiation
* RDMA vectors discovery between idpf and control plane
These patches are split from the submission "Add RDMA support for Intel
IPU E2000 (GEN3)" [1]. The patches have been tested on a range of hosts
and platforms with a variety of general RDMA applications which include
standalone verbs (rping, perftest, etc.), storage and HPC applications.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
[1] https://lore.kernel.org/all/20240724233917.704-1-tatyana.e.nikolova@intel.com/
IWL reviews:
v3: https://lore.kernel.org/all/20250708210554.1662-1-tatyana.e.nikolova@intel.com/
v2: https://lore.kernel.org/all/20250612220002.1120-1-tatyana.e.nikolova@intel.com/
v1 (split from previous series):
https://lore.kernel.org/all/20250523170435.668-1-tatyana.e.nikolova@intel.com/
v3: https://lore.kernel.org/all/20250207194931.1569-1-tatyana.e.nikolova@intel.com/
RFC v2: https://lore.kernel.org/all/20240824031924.421-1-tatyana.e.nikolova@intel.com/
RFC: https://lore.kernel.org/all/20240724233917.704-1-tatyana.e.nikolova@intel.com/
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/linux:
idpf: implement get LAN MMIO memory regions
idpf: implement IDC vport aux driver MTU change handler
idpf: implement remaining IDC RDMA core callbacks and handlers
idpf: implement RDMA vport auxiliary dev create, init, and destroy
idpf: implement core RDMA auxiliary dev create, init, and destroy
idpf: use reserved RDMA vectors from control plane
====================
Link: https://patch.msgid.link/20250714181002.2865694-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tariq Toukan says:
====================
net/mlx5e: Add support for PCIe congestion events
Dragos says:
PCIe congestion events are events generated by the firmware when the
device side has sustained PCIe inbound or outbound traffic above
certain thresholds. The high and low threshold are hysteresis thresholds
to prevent flapping: once the high threshold has been reached, a low
threshold event will be triggered only after the bandwidth usage went
below the low threshold.
This series adds support for receiving and exposing such events as
ethtool counters.
2 new pairs of counters are exposed: pci_bw_in/outbound_high/low. These
should help the user understand if the device PCI is under pressure.
Planned followup patches:
- Allow configuration of thresholds through devlink.
- Add ethtool counter for wakeups which did not result in any state
change.
====================
Link: https://patch.msgid.link/1752589821-145787-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the PCIe Congestion Event notifier which triggers a work item
to query the PCIe Congestion Event object. The result of the congestion
state is reflected in the new ethtool stats:
* pci_bw_inbound_high: the device has crossed the high threshold for
inbound PCIe traffic.
* pci_bw_inbound_low: the device has crossed the low threshold for
inbound PCIe traffic
* pci_bw_outbound_high: the device has crossed the high threshold for
outbound PCIe traffic.
* pci_bw_outbound_low: the device has crossed the low threshold for
outbound PCIe traffic
The high and low thresholds are currently configured at 90% and 75%.
These are hysteresis thresholds which help to check if the
PCI bus on the device side is in a congested state.
If low + 1 = high then the device is in a congested state. If low == high
then the device is not in a congested state.
The counters are also documented.
A follow-up patch will make the thresholds configurable.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1752589821-145787-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add initial infrastructure to create and destroy the PCIe Congestion
Event object if the object is supported.
The verb for the object creation function is "set" instead of
"create" because the function will accommodate the modify operation
as well in a subsequent patch.
The next patches will hook it up to the event handler and will add
actual functionality.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1752589821-145787-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The netiucv driver creates TCP/IP interfaces over IUCV between Linux
guests on z/VM and other z/VM entities.
Rationale for removal:
- NETIUCV connections are only supported for compatibility with
earlier versions and not to be used for new network setups,
since at least Linux kernel 4.0.
- No known active users, use cases, or product dependencies
- The driver is no longer relevant for z/VM networking;
preferred methods include:
* Device pass-through (e.g., OSA, RoCE)
* z/VM Virtual Switch (VSWITCH)
The IUCV mechanism itself remains supported and is actively used
via AF_IUCV, hvc_iucv, and smsg_iucv.
Signed-off-by: Nagamani PV <nagamani@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250715074210.3999296-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ryan Wanner says:
====================
Expose REFCLK for RMII and enable RMII
This set allows the REFCLK property to be exposed as a dt-property to
properly reflect the correct RMII layout. RMII can take an external or
internal provided REFCLK, since this is not SoC dependent but board
dependent this must be exposed as a DT property for the macb driver.
This set also enables RMII mode for the SAMA7 SoCs gigabit mac.
v1: https://lore.kernel.org/cover.1750346271.git.Ryan.Wanner@microchip.com
====================
Link: https://patch.msgid.link/cover.1752510727.git.Ryan.Wanner@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Breno Leitao says:
====================
selftest: net: Add selftest for netpoll
I am submitting a new selftest for the netpoll subsystem specifically
targeting the case where the RX is polling in the TX path, which is
a case that we don't have any test in the tree today. This is done when
netpoll_poll_dev() called, and this test creates a scenario when that is
probably.
The test does the following:
1) Configuring a single RX/TX queue to increase contention on the
interface.
2) Generating background traffic to saturate the network, mimicking
real-world congestion.
3) Sending netconsole messages to trigger netpoll polling and monitor
its behavior.
4) Using dynamic netconsole targets via configfs, with the ability to
delete and recreate targets during the test.
5) Running bpftrace in parallel to verify that netpoll_poll_dev() is
called when expected. If it is called, then the test passes,
otherwise the test is marked as skipped.
In order to achieve it, I stole Jakub's bpftrace helper from [1], and
did some small changes that I found useful to use the helper.
So, this patchset basically contains:
1) The code stolen from Jakub
2) Improvements on bpftrace() helper
3) The selftest itself
Link: https://lore.kernel.org/all/20250421222827.283737-22-kuba@kernel.org/ [1]
====================
Link: https://patch.msgid.link/20250714-netpoll_test-v7-0-c0220cfaa63e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a basic selftest for the netpoll polling mechanism, specifically
targeting the netpoll poll() side.
The test creates a scenario where network transmission is running at
maximum speed, and netpoll needs to poll the NIC. This is achieved by:
1. Configuring a single RX/TX queue to create contention
2. Generating background traffic to saturate the interface
3. Sending netconsole messages to trigger netpoll polling
4. Using dynamic netconsole targets via configfs
5. Delete and create new netconsole targets after some messages
6. Start a bpftrace in parallel to make sure netpoll_poll_dev() is
called
7. If bpftrace exists and netpoll_poll_dev() was called, stop.
The test validates a critical netpoll code path by monitoring traffic
flow and ensuring netpoll_poll_dev() is called when the normal TX path
is blocked.
This addresses a gap in netpoll test coverage for a path that is
tricky for the network stack.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250714-netpoll_test-v7-3-c0220cfaa63e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The '@' prefix in bpftrace map keys is specific to bpftrace and can be
safely removed when processing results. This patch modifies the bpftrace
utility to strip the '@' from map keys before storing them in the result
dictionary, making the keys more consistent with Python conventions.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250714-netpoll_test-v7-2-c0220cfaa63e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bpftrace is very useful for low level driver testing. perf or trace-cmd
would also do for collecting data from tracepoints, but they require
much more post-processing.
Add a wrapper for running bpftrace and sanitizing its output.
bpftrace has JSON output, which is great, but it prints loose objects
and in a slightly inconvenient format. We have to read the objects
line by line, and while at it return them indexed by the map name.
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250714-netpoll_test-v7-1-c0220cfaa63e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
`vsock_do_ioctl` returns -ENOIOCTLCMD if an ioctl support is not
implemented, like for SIOCINQ before commit f7c7226592 ("vsock: Add
support for SIOCINQ ioctl"). In net/socket.c, -ENOIOCTLCMD is re-mapped
to -ENOTTY for the user space. So, our test suite, without that commit
applied, is failing in this way:
34 - SOCK_STREAM ioctl(SIOCINQ) functionality...ioctl(21531): Inappropriate ioctl for device
Return false in vsock_ioctl_int() to skip the test in this case as well,
instead of failing.
Fixes: 53548d6bff ("test/vsock: Add retry mechanism to ioctl wrapper")
Cc: niuxuewei.nxw@antgroup.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Xuewei Niu <niuxuewei.nxw@antgroup.com>
Link: https://patch.msgid.link/20250715093233.94108-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The CI reported a UaF in tcp_prune_ofo_queue():
BUG: KASAN: slab-use-after-free in tcp_prune_ofo_queue+0x55d/0x660
Read of size 4 at addr ffff8880134729d8 by task socat/20348
CPU: 0 UID: 0 PID: 20348 Comm: socat Not tainted 6.16.0-rc5-virtme #1 PREEMPT(full)
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl+0x82/0xd0
print_address_description.constprop.0+0x2c/0x400
print_report+0xb4/0x270
kasan_report+0xca/0x100
tcp_prune_ofo_queue+0x55d/0x660
tcp_try_rmem_schedule+0x855/0x12e0
tcp_data_queue+0x4dd/0x2260
tcp_rcv_established+0x5e8/0x2370
tcp_v4_do_rcv+0x4ba/0x8c0
__release_sock+0x27a/0x390
release_sock+0x53/0x1d0
tcp_sendmsg+0x37/0x50
sock_write_iter+0x3c1/0x520
vfs_write+0xc09/0x1210
ksys_write+0x183/0x1d0
do_syscall_64+0xc1/0x380
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fcf73ef2337
Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:00007ffd4f924708 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fcf73ef2337
RDX: 0000000000002000 RSI: 0000555f11d1a000 RDI: 0000000000000008
RBP: 0000555f11d1a000 R08: 0000000000002000 R09: 0000000000000000
R10: 0000000000000040 R11: 0000000000000246 R12: 0000000000000008
R13: 0000000000002000 R14: 0000555ee1a44570 R15: 0000000000002000
</TASK>
Allocated by task 20348:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_slab_alloc+0x59/0x70
kmem_cache_alloc_node_noprof+0x110/0x340
__alloc_skb+0x213/0x2e0
tcp_collapse+0x43f/0xff0
tcp_try_rmem_schedule+0x6b9/0x12e0
tcp_data_queue+0x4dd/0x2260
tcp_rcv_established+0x5e8/0x2370
tcp_v4_do_rcv+0x4ba/0x8c0
__release_sock+0x27a/0x390
release_sock+0x53/0x1d0
tcp_sendmsg+0x37/0x50
sock_write_iter+0x3c1/0x520
vfs_write+0xc09/0x1210
ksys_write+0x183/0x1d0
do_syscall_64+0xc1/0x380
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 20348:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x38/0x50
kmem_cache_free+0x149/0x330
tcp_prune_ofo_queue+0x211/0x660
tcp_try_rmem_schedule+0x855/0x12e0
tcp_data_queue+0x4dd/0x2260
tcp_rcv_established+0x5e8/0x2370
tcp_v4_do_rcv+0x4ba/0x8c0
__release_sock+0x27a/0x390
release_sock+0x53/0x1d0
tcp_sendmsg+0x37/0x50
sock_write_iter+0x3c1/0x520
vfs_write+0xc09/0x1210
ksys_write+0x183/0x1d0
do_syscall_64+0xc1/0x380
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The buggy address belongs to the object at ffff888013472900
which belongs to the cache skbuff_head_cache of size 232
The buggy address is located 216 bytes inside of
freed 232-byte region [ffff888013472900, ffff8880134729e8)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x13472
head: order:1 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x80000000000040(head|node=0|zone=1)
page_type: f5(slab)
raw: 0080000000000040 ffff88800198fb40 ffffea0000347b10 ffffea00004f5290
raw: 0000000000000000 0000000000120012 00000000f5000000 0000000000000000
head: 0080000000000040 ffff88800198fb40 ffffea0000347b10 ffffea00004f5290
head: 0000000000000000 0000000000120012 00000000f5000000 0000000000000000
head: 0080000000000001 ffffea00004d1c81 00000000ffffffff 00000000ffffffff
head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888013472880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888013472900: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888013472980: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
^
ffff888013472a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888013472a80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
Indeed tcp_prune_ofo_queue() is reusing the skb dropped a few lines
above. The caller wants to enqueue 'in_skb', lets check space vs the
latter.
Fixes: 1d2fbaad7c ("tcp: stronger sk_rcvbuf checks")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: syzbot+865aca08c0533171bf6a@syzkaller.appspotmail.com
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/b78d2d9bdccca29021eed9a0e7097dd8dc00f485.1752567053.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The requirement of ->get_rxfh_fields() in ethtool_set_rxfh() is there to
verify that we have no conflict of input_xfrm with the RSS fields
options, there is no point in doing it if input_xfrm is not
supported/requested.
This is under the assumption that a driver that supports input_xfrm will
also support ->get_rxfh_fields(), so add a WARN_ON() to
ethtool_check_ops() to verify it, and remove the op NULL check.
This fixes the following error in mlx4_en, which doesn't support
getting/setting RXFH fields.
$ ethtool --set-rxfh-indir eth2 hfunc xor
Cannot set RX flow hash configuration: Operation not supported
Fixes: 72792461c8 ("net: ethtool: don't mux RXFH via rxnfc callbacks")
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250715140754.489677-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub reported that the rtnetlink test for the preferred lifetime of an
address has become quite flaky. The issue started appearing around the 6.16
merge window in May, and the test fails with:
FAIL: preferred_lft addresses remaining
The flakiness might be related to power-saving behavior, as address
expiration is handled by a "power-efficient" workqueue.
To address this, use slowwait to check more frequently whether the address
still exists. This reduces the likelihood of the system entering a low-power
state during the test, improving reliability.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250715043459.110523-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rds_tcp_accept_one() starts with a pretty much verbatim
copy of kernel_accept(). Might as well use the real thing...
That code went into mainline in 2009, kernel_accept()
had been added in Aug 2006, the copyright on rds/tcp_listen.c
is "Copyright (c) 2006 Oracle", so it's entirely possible
that it predates the introduction of kernel_accept().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://patch.msgid.link/20250713180134.GC1880847@ZenIV
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Miri Korenblit says:
====================
iwlwifi features, notably
- cleanup of unsupported APIs
- add a API range per RF
- transport layer cleanups
- a few small fixes
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Matt Johnston says:
====================
net: mctp: Improved bind handling
This series improves a couple of aspects of MCTP bind() handling.
MCTP wasn't checking whether the same MCTP type was bound by multiple
sockets. That would result in messages being received by an arbitrary
socket, which isn't useful behaviour. Instead it makes more sense to
have the duplicate binds fail, the same as other network protocols.
An exception is made for more-specific binds to particular MCTP
addresses.
It is also useful to be able to limit a bind to only receive incoming
request messages (MCTP TO bit set) from a specific peer+type, so that
individual processes can communicate with separate MCTP peers. One
example is a PLDM firmware update requester, which will initiate
communication with a device, and then the device will connect back to the
requester process.
These limited binds are implemented by a connect() call on the socket
prior to bind. connect() isn't used in the general case for MCTP, since
a plain send() wouldn't provide the required MCTP tag argument for
addressing.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
====================
Link: https://patch.msgid.link/20250710-mctp-bind-v4-0-8ec2f6460c56@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Prior to calling bind() a program may call connect() on a socket to
restrict to a remote peer address.
Using connect() is the normal mechanism to specify a remote network
peer, so we use that here. In MCTP connect() is only used for bound
sockets - send() is not available for MCTP since a tag must be provided
for each message.
The smctp_type must match between connect() and bind() calls.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Link: https://patch.msgid.link/20250710-mctp-bind-v4-6-8ec2f6460c56@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a specific EID is passed as a bind address, it only makes sense to
interpret with an actual network ID, so resolve that to the default
network at bind time.
For bind address of MCTP_ADDR_ANY, we want to be able to capture traffic
to any network and address, so keep the current behaviour of matching
traffic from any network interface (don't interpret MCTP_NET_ANY as
the default network ID).
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Link: https://patch.msgid.link/20250710-mctp-bind-v4-3-8ec2f6460c56@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Disallow bind() calls that have the same arguments as existing bound
sockets. Previously multiple sockets could bind() to the same
type/local address, with an arbitrary socket receiving matched messages.
This is only a partial fix, a future commit will define precedence order
for MCTP_ADDR_ANY versus specific EID bind(), which are allowed to exist
together.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Link: https://patch.msgid.link/20250710-mctp-bind-v4-2-8ec2f6460c56@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In cfg80211_off_channel_oper_allowed(), the current logic disallows
off-channel operations if any link operates on a radar channel,
assuming such channels cannot be vacated. This assumption holds for
non-MLO interfaces but not for MLO.
With MLO and multi-radio devices, different links may operate on
separate radios. This allows one link to scan off-channel while
another remains on a radar channel. For example, in a 5 GHz
split-phy setup, the lower band can scan while the upper band
stays on a radar channel.
Off-channel operations can be allowed if the radio/link onto which the
input channel falls is different from the radio/link which has an active
radar channel. Therefore, fix cfg80211_off_channel_oper_allowed() by
returning false only if the requested channel maps to the same radio as
an active radar channel. Allow off-channel operations when the requested
channel is on a different radio, as in MLO with multi-radio setups.
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Signed-off-by: Amith A <quic_amitajit@quicinc.com>
Link: https://patch.msgid.link/20250714040742.538550-1-quic_amitajit@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
