Skipping power ungate exposed some scenarios that will fail
like below:
```
amdgpu: Register(0) [regVPEC_QUEUE_RESET_REQ] failed to reach value 0x00000000 != 0x00000001n
amdgpu 0000:c1:00.0: amdgpu: VPE queue reset failed
...
amdgpu: [drm] *ERROR* wait_for_completion_timeout timeout!
```
The underlying s2idle issue that prompted this commit is going to
be fixed in BIOS.
This reverts commit 2a6c826cfe.
This was lost in the 6.19 merge so reapply it.
Fixes: 2a6c826cfe ("drm/amd: Skip power ungate during suspend for VPE")
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Konstantin <answer2019@yandex.ru>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220812
Reported-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3925683515)
During Mode 1 reset, the ASIC undergoes a reset cycle and becomes
temporarily inaccessible via PCIe. Any attempt to access MMIO registers
during this window (e.g., from interrupt handlers or other driver threads)
can result in uncompleted PCIe transactions, leading to NMI panics or
system hangs.
To prevent this, set the `no_hw_access` flag to true immediately after
triggering the reset. This signals other driver components to skip
register accesses while the device is offline.
A memory barrier `smp_mb()` is added to ensure the flag update is
globally visible to all cores before the driver enters the sleep/wait
state.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7edb503fe4)
ISP mfd child devices are using genpd and the system suspend-resume
operations between genpd and amdgpu parent device which uses only
runtime suspend-resume are not in sync.
Linux power manager during suspend-resume resuming the genpd devices
earlier than the amdgpu parent device. This is resulting in the below
warning as SMU is in suspended state when genpd attempts to resume ISP.
WARNING: CPU: 13 PID: 5435 at drivers/gpu/drm/amd/amdgpu/../pm/swsmu/amdgpu_smu.c:398 smu_dpm_set_power_gate+0x36f/0x380 [amdgpu]
To fix this warning isp suspend-resume is handled as part of amdgpu
parent device suspend-resume instead of genpd sequence. Each ISP MFD
child device is marked as dev_pm_syscore_device to skip genpd
suspend-resume and use pm_runtime_force api's to suspend-resume
the devices when callbacks from amdgpu are received.
Co-developed-by: Gjorgji Rosikopulos <grosikop@amd.com>
Signed-off-by: Gjorgji Rosikopulos <grosikop@amd.com>
Signed-off-by: Bin Du <bin.du@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0288a345f1)
If when we backup the ring contents for reemit before a
ring reset, we skip jobs associated with the bad
context, however, we need to make sure the fences
are reemited as unprocessed submissions may depend on
them.
v2: clean up fence handling, make helpers static
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 155a748f14)
If we cancel a bad job and reemit the ring contents, and
we get another timeout, cancel everything rather than reemitting.
The wptr markers are only relevant for the original emit. If
we reemit, the wptr markers are no longer correct.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fb62a2067c)
Pull drm fixes from Dave Airlie:
"This is the weekly fixes for what is in next tree, mostly amdgpu and
some i915, panthor and a core revert.
core:
- revert dumb bo 8 byte alignment
amdgpu:
- SI fix
- DC reduce stack usage
- HDMI fixes
- VCN 4.0.5 fix
- DP MST fix
- DC memory allocation fix
amdkfd:
- SVM fix
- Trap handler fix
- VGPR fixes for GC 11.5
i915:
- Fix format string truncation warning
- FIx runtime PM reference during fbdev BO creation
panthor:
- fix UAF
renesas:
- fix sync flag handling"
* tag 'drm-next-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel:
Revert "drm/amd/display: Fix pbn to kbps Conversion"
drm/amd: Fix unbind/rebind for VCN 4.0.5
drm/i915: Fix format string truncation warning
drm/i915/fbdev: Hold runtime PM ref during fbdev BO creation
drm/amd/display: Improve HDMI info retrieval
drm/amdkfd: bump minimum vgpr size for gfx1151
drm/amd/display: shrink struct members
drm/amdkfd: Export the cwsr_size and ctl_stack_size to userspace
drm/amd/display: Refactor dml_core_mode_support to reduce stack frame
drm/amdgpu: don't attach the tlb fence for SI
drm/amd/display: Use GFP_ATOMIC in dc_create_plane_state()
drm/amdkfd: Trap handler support for expert scheduling mode
drm/amdkfd: Use huge page size to check split svm range alignment
drm/rcar-du: dsi: Handle both DRM_MODE_FLAG_N.SYNC and !DRM_MODE_FLAG_P.SYNC
drm/gem-shmem: revert the 8-byte alignment constraint
drm/gem-dma: revert the 8-byte alignment constraint
drm/panthor: Prevent potential UAF in group creation
Unbinding amdgpu has no problems, but binding it again leads to an
error of sysfs file already existing. This is because it wasn't
actually cleaned up on unbind. Add the missing cleanup step.
Fixes: 547aad32ed ("drm/amdgpu: add VCN4 ip block support")
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d717e62e9b)
Cc: stable@vger.kernel.org
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Enable host bridge emulation for PCI_DOMAINS_GENERIC platforms (Dan
Williams)
- Switch vmd from custom domain number allocator to the common
allocator to prevent a potential race with new non-VMD buses (Dan
Williams)
- Enable Precision Time Measurement (PTM) only if device advertises
support for a relevant role, to prevent invalid PTM Requests that
cause ACS violations that are reported as AER Uncorrectable
Non-Fatal errors (Mika Westerberg)
Resource management:
- Prevent resource tree corruption when BAR resize fails (Ilpo
Järvinen)
- Restore BARs to the original size if a BAR resize fails (Ilpo
Järvinen)
- Remove BAR release from BAR resize attempts by the xe, i915, and
amdgpu drivers so the PCI core can restore BARs if the resize fails
(Ilpo Järvinen)
- Move Resizable BAR code to rebar.c (Ilpo Järvinen)
- Add pci_rebar_size_supported() and use it in i915 and xe (Ilpo
Järvinen)
- Add pci_rebar_get_max_size() and use it in xe and amdgpu (Ilpo
Järvinen)
Power management and error handling:
- For drivers using PCI legacy suspend, save config state at suspend
so that state (not any earlier state from enumeration, probe, or
error recovery) will be restored when resuming (Lukas Wunner)
- For devices with no driver or a driver that lacks power management,
save config state at hibernate so that state (not any earlier state
from enumeration, probe, or error recovery) will be restored when
resuming (Lukas Wunner)
- Save device config space on device addition, before driver binding,
so error recovery works more reliably (Lukas Wunner)
- Drop pci_save_state() from several drivers that no longer need it
since the PCI core always does it and pci_restore_state() no longer
invalidates the saved state (Lukas Wunner)
- Document use of pci_save_state() by drivers to capture the state
they want restored during error recovery (Lukas Wunner)
Power control:
- Add a struct pci_ops.assert_perst() function pointer to
assert/deassert PCIe PERST# and implement it for the qcom driver
(Krishna Chaitanya Chundru)
- Add DT binding and pwrctrl driver for the Toshiba TC9563 PCIe
switch, which must be held in reset after poweron so the pwrctrl
driver can configure the switch via I2C before bringing up the
links (Krishna Chaitanya Chundru)
Endpoint framework:
- Convert the endpoint doorbell test to use a threaded IRQ to fix a
'sleeping while atomic' issue (Bhanu Seshu Kumar Valluri)
- Add endpoint VNTB MSI doorbell support to reduce latency between
host and endpoint (Frank Li)
New native PCIe controller drivers:
- Add CIX Sky1 host controller DT binding and driver (Hans Zhang)
- Add NXP S32G host controller DT binding and driver (Vincent
Guittot)
- Add Renesas RZ/G3S host controller DT binding and driver (Claudiu
Beznea)
- Add SpacemiT K1 host controller DT binding and driver (Alex Elder)
Amlogic Meson PCIe controller driver:
- Update DT binding to name DBI region 'dbi', not 'elbi', and update
driver to support both (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Move struct pci_host_bridge allocation from pci_host_common_init()
to callers, which significantly simplifies pcie-apple (Marc
Zyngier)
Broadcom STB PCIe controller driver:
- Disable advertising ASPM L0s support correctly (Jim Quinlan)
- Add a panic/die handler to print diagnostic info in case PCIe
caused an unrecoverable abort (Jim Quinlan)
Cadence PCIe controller driver:
- Add module support for Cadence platform host and endpoint
controller driver (Manikandan K Pillai)
- Split headers into 'legacy' (LGA) and 'high perf' (HPA) to prepare
for new CIX Sky1 driver (Manikandan K Pillai)
MediaTek PCIe controller driver:
- Convert DT binding to YAML schema (Christian Marangi)
- Add Airoha AN7583 DT compatible and driver support (Christian
Marangi)
Qualcomm PCIe controller driver:
- Add Qualcomm Kaanapali to SM8550 DT binding (Qiang Yu)
- Add required 'power-domains' and 'resets' to qcom sa8775p, sc7280,
sc8280xp, sm8150, sm8250, sm8350, sm8450, sm8550, x1e80100 DT
schemas (Krzysztof Kozlowski)
- Look up OPP using both frequency and data rate (not just frequency)
so RPMh votes can account for both (Krishna Chaitanya Chundru)
Rockchip DesignWare PCIe controller driver:
- Add Rockchip RK3528 compatible strings in DT binding (Yao Zi)
STMicroelectronics STM32MP25 PCIe controller driver:
- Fix a race between link training and endpoint register
initialization (Christian Bruel)
- Align endpoint allocations to match the ATU requirements (Christian
Bruel)
Synopsys DesignWare PCIe controller driver:
- Clear L1 PM Substate Capability 'Supported' bits unless glue driver
says it's supported, which prevents users from enabling non-working
L1SS. Currently only qcom and tegra194 support L1SS (Bjorn Helgaas)
- Remove now-superfluous L1SS disable code from tegra194 (Bjorn
Helgaas)
- Configure L1SS support in dw-rockchip when DT says
'supports-clkreq' (Shawn Lin)
TI Keystone PCIe controller driver:
- Fail the probe instead of silently succeeding if ks_pcie_of_data
didn't specify Root Complex or Endpoint mode (Siddharth Vadapalli)
- Make keystone buildable as a loadable module, except on ARM32 where
hook_fault_code() is __init (Siddharth Vadapalli)"
* tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (100 commits)
MAINTAINERS: Add Manivannan Sadhasivam as PCI/pwrctrl maintainer
MAINTAINERS: Add CIX Sky1 PCIe controller driver maintainer
PCI: sky1: Add PCIe host support for CIX Sky1
dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings
PCI: cadence: Add support for High Perf Architecture (HPA) controller
MAINTAINERS: Add NXP S32G PCIe controller driver maintainer
PCI: s32g: Add NXP S32G PCIe controller driver (RC)
PCI: dwc: Add register and bitfield definitions
dt-bindings: PCI: s32g: Add NXP S32G PCIe controller
PCI: Add Renesas RZ/G3S host controller driver
PCI: host-generic: Move bridge allocation outside of pci_host_common_init()
dt-bindings: PCI: Add Renesas RZ/G3S PCIe controller binding
PCI: Validate pci_rebar_size_supported() input
Documentation: PCI: Amend error recovery doc with pci_save_state() rules
treewide: Drop pci_save_state() after pci_restore_state()
PCI/ERR: Ensure error recoverability at all times
PCI/PM: Stop needlessly clearing state_saved on enumeration and thaw
PCI/PM: Reinstate clearing state_saved in legacy and !PM codepaths
PCI: dw-rockchip: Configure L1SS support
PCI: tegra194: Remove unnecessary L1SS disable code
...
Pull drm updates from Dave Airlie:
"There was a rather late merge of a new color pipeline feature, that
some userspace projects are blocked on, and has seen a lot of work in
amdgpu. This should have seen some time in -next. There is additional
support for this for Intel, that if it arrives in the next day or two
I'll pass it on in another pull request and you can decide if you want
to take it.
Highlights:
- Arm Ethos NPU accelerator driver
- new DRM color pipeline support
- amdgpu will now run discrete SI/CIK cards instead of radeon, which
enables vulkan support in userspace
- msm gets gen8 gpu support
- initial Xe3P support in xe
Full detail summary:
New driver:
- Arm Ethos-U65/U85 accel driver
Core:
- support the drm color pipeline in vkms/amdgfx
- add support for drm colorop pipeline
- add COLOR PIPELINE plane property
- add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
- throttle dirty worker with vblank
- use drm_for_each_bridge_in_chain_scoped in drm's bridge code
- Ensure drm_client_modeset tests are enabled in UML
- add simulated vblank interrupt - use in drivers
- dumb buffer sizing helper
- move freeing of drm client memory to driver
- crtc sharpness strength property
- stop using system_wq in scheduler/drivers
- support emergency restore in drm-client
Rust:
- make slice::as_flattened usable on all supported rustc
- add FromBytes::from_bytes_prefix() method
- remove redundant device ptr from Rust GEM object
- Change how AlwaysRefCounted is implemented for GEM objects
gpuvm:
- Add deferred vm_bo cleanup to GPUVM (for rust)
atomic:
- cleanup and improve state handling interfaces
buddy:
- optimize block management
dma-buf:
- heaps: Create heap per CMA reserved location
- improve userspace documentation
dp:
- add POST_LT_ADJ_REQ training sequence
- DPCD dSC quirk for synaptics panamera devices
- helpers to query branch DSC max throughput
ttm:
- Rename ttm_bo_put to ttm_bo_fini
- allow page protection flags on risc-v
- rework pipelined eviction fence handling
amdgpu:
- enable amdgpu by default for SI/CI dGPUs
- enable DC by default on SI
- refactor CIK/SI enablement
- add ABM KMS property
- Re-enable DM idle optimizations
- DC Analog encoders support
- Powerplay fixes for fiji/iceland
- Enable DC on bonaire by default
- HMM cleanup
- Add new RAS framework
- DML2.1 updates
- YCbCr420 fixes
- DC FP fixes
- DMUB fixes
- LTTPR fixes
- DTBCLK fixes
- DMU cursor offload handling
- Userq validation improvements
- Unify shutdown callback handling
- Suspend improvements
- Power limit code cleanup
- SR-IOV fixes
- AUX backlight fixes
- DCN 3.5 fixes
- HDMI compliance fixes
- DCN 4.0.1 cursor updates
- DCN interrupt fix
- DC KMS full update improvements
- Add additional HDCP traces
- DCN 3.2 fixes
- DP MST fixes
- Add support for new SR-IOV mailbox interface
- UQ reset support
- HDP flush rework
- VCE1 support
amdkfd:
- HMM cleanups
- Relax checks on save area overallocations
- Fix GPU mappings after prefetch
radeon:
- refactor CIK/SI enablement
xe:
- Initial Xe3P support
- panic support on VRAM for display
- fix stolen size check
- Loosen used tracking restriction
- New SR-IOV debugfs structure and debugfs updates
- Hide the GPU madvise flag behind a VM_BIND flag
- Always expose VRAM provisioning data on discrete GPUs
- Allow VRAM mappings for userptr when used with SVM
- Allow pinning of p2p dma-buf
- Use per-tile debugfs where appropriate
- Add documentation for Execution Queues
- PF improvements
- VF migration recovery redesign work
- User / Kernel VRAM partitioning
- Update Tile-based messages
- Allow configfs to disable specific GT types
- VF provisioning and migration improvements
- use SVM range helpers in PT layer
- Initial CRI support
- access VF registers using dedicated MMIO view
- limit number of jobs per exec queue
- add sriov_admin sysfs tree
- more crescent island specific support
- debugfs residency counter
- SRIOV migration work
- runtime registers for GFX 35
i915:
- add initial Xe3p_LPD display version 35 support
- Enable LNL+ content adaptive sharpness filter
- Use optimized VRR guardband
- Enable Xe3p LT PHY
- enable FBC support for Xe3p_LPD display
- add display 30.02 firmware support
- refactor SKL+ watermark latency setup
- refactor fbdev handling
- call i915/xe runtime PM via function pointers
- refactor i915/xe stolen memory/display interfaces
- use display version instead of gfx version in display code
- extend i915_display_info with Type-C port details
- lots of display cleanups/refactorings
- set O_LARGEFILE in __create_shmem
- skuip guc communication warning on reset
- fix time conversions
- defeature DRRS on LNL+
- refactor intel_frontbuffer split between i915/xe/display
- convert inteL_rom interfaces to struct drm_device
- unify display register polling interfaces
- aovid lock inversion when pinning to GGTT on CHV/BXT+VTD
panel:
- Add KD116N3730A08/A12, chromebook mt8189
- JT101TM023, LQ079L1SX01,
- GLD070WX3-SL01 MIPI DSI
- Samsung LTL106AL0, Samsung LTL106AL01
- Raystar RFF500F-AWH-DNN
- Winstar WF70A8SYJHLNGA
- Wanchanglong w552946aaa
- Samsung SOFEF00
- Lenovo X13s panel
- ilitek-ili9881c - add rpi 5" support
- visionx-rm69299 - add backlight support
- edp - support AUI B116XAN02.0
bridge:
- improve ref counting
- ti-sn65dsi86 - add support for DP mode with HPD
- synopsis: support CEC, init timer with correct freq
- ASL CS5263 DP-to-HDMI bridge support
nova-core:
- introduce bitfield! macro
- introduce safe integer converters
- GSP inits to fully booted state on Ampere
- Use more future-proof register for GPU identification
nova-drm:
- select NOVA_CORE
- 64-bit only
nouveau:
- improve reclocking on tegra 186+
- add large page and compression support
msm:
- GPU:
- Gen8 support: A840 (Kaanapali) and X2-85 (Glymur)
- A612 support
- MDSS:
- Added support for Glymur and QCS8300 platforms
- DPU:
- Enabled Quad-Pipe support, unlocking higher resolutions support
- Added support for Glymur platform
- Documented DPU on QCS8300 platform as supported
- DisplayPort:
- Added support for Glymur platform
- Added support lame remapping inside DP block
- Documented DisplayPort controller on QCS8300 and SM6150/QCS615
as supported
tegra:
- NVJPG driver
panfrost:
- display JM contexts over debugfs
- export JM contexts to userspace
- improve error and job handling
panthor:
- support custom ASN_HASH for mt8196
- support mali-G1 GPU
- flush shmem write before mapping buffers uncached
- make timeout per-queue instead of per-job
mediatek:
- MT8195/88 HDMIv2/DDCv2 support
rockchip:
- dsi: add support for RK3368
amdxdna:
- enhance runtime PM
- last hardware error reading uapi
- support firmware debug output
- add resource and telemetry data uapi
- preemption support
imx:
- add driver for HDMI TX Parallel audio interface
ivpu:
- add support for user-managed preemption buffer
- add userptr support
- update JSM firware API to 3.33.0
- add better alloc/free warnings
- fix page fault in unbind all bos
- rework bind/unbind of imported buffers
- enable MCA ECC signalling
- split fw runtime and global memory buffers
- add fdinfo memory statistics
tidss:
- convert to drm logging
- logging cleanup
ast:
- refactor generation init paths
- add per chip generation detect_tx_chip
- set quirks for each chip model
atmel-hlcdc:
- set LCDC_ATTRE register in plane disable
- set correct values for plane scaler
solomon:
- use drm helper for get_modes and move_valid
sitronix:
- fix output position when clearing screens
qaic:
- support dma-buf exports
- support new firmware's READ_DATA implementation
- sahara AIC200 image table update
- add sysfs support
- add coredump support
- add uevents support
- PM support
sun4i:
- layer refactors to decouple plane from output
- improve DE33 support
vc4:
- switch to generic CEC helpers
komeda:
- use drm_ logging functions
vkms:
- configfs support for display configuration
vgem:
- fix fence timer deadlock
etnaviv:
- add HWDB entry for GC8000 Nano Ultra VIP r6205"
* tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel: (1869 commits)
Revert "drm/amd: Skip power ungate during suspend for VPE"
drm/amdgpu: use common defines for HUB faults
drm/amdgpu/gmc12: add amdgpu_vm_handle_fault() handling
drm/amdgpu/gmc11: add amdgpu_vm_handle_fault() handling
drm/amdgpu: use static ids for ACP platform devs
drm/amdgpu/sdma6: Update SDMA 6.0.3 FW version to include UMQ protected-fence fix
drm/amdgpu: Forward VMID reservation errors
drm/amdgpu/gmc8: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc7: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Cache VM fault info
drm/amdgpu/gmc6: Don't print MC client as it's unknown
drm/amdgpu/cz_ih: Enable soft IRQ handler ring
drm/amdgpu/tonga_ih: Enable soft IRQ handler ring
drm/amdgpu/iceland_ih: Enable soft IRQ handler ring
drm/amdgpu/cik_ih: Enable soft IRQ handler ring
drm/amdgpu/si_ih: Enable soft IRQ handler ring
drm/amd/display: fix typo in display_mode_core_structs.h
drm/amd/display: fix Smart Power OLED not working after S4
drm/amd/display: Move RGB-type check for audio sync to DCE HW sequence
...
Pull printk updates from Petr Mladek:
- Allow creaing nbcon console drivers with an unsafe write_atomic()
callback that can only be called by the final nbcon_atomic_flush_unsafe().
Otherwise, the driver would rely on the kthread.
It is going to be used as the-best-effort approach for an
experimental nbcon netconsole driver, see
https://lore.kernel.org/r/20251121-nbcon-v1-2-503d17b2b4af@debian.org
Note that a safe .write_atomic() callback is supposed to work in NMI
context. But some networking drivers are not safe even in IRQ
context:
https://lore.kernel.org/r/oc46gdpmmlly5o44obvmoatfqo5bhpgv7pabpvb6sjuqioymcg@gjsma3ghoz35
In an ideal world, all networking drivers would be fixed first and
the atomic flush would be blocked only in NMI context. But it brings
the question how reliable networking drivers are when the system is
in a bad state. They might block flushing more reliable serial
consoles which are more suitable for serious debugging anyway.
- Allow to use the last 4 bytes of the printk ring buffer.
- Prevent queuing IRQ work and block printk kthreads when consoles are
suspended. Otherwise, they create non-necessary churn or even block
the suspend.
- Release console_lock() between each record in the kthread used for
legacy consoles on RT. It might significantly speed up the boot.
- Release nbcon context between each record in the atomic flush. It
prevents stalls of the related printk kthread after it has lost the
ownership in the middle of a record
- Add support for NBCON consoles into KDB
- Add %ptsP modifier for printing struct timespec64 and use it where
possible
- Misc code clean up
* tag 'printk-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (48 commits)
printk: Use console_is_usable on console_unblank
arch: um: kmsg_dump: Use console_is_usable
drivers: serial: kgdboc: Drop checks for CON_ENABLED and CON_BOOT
lib/vsprintf: Unify FORMAT_STATE_NUM handlers
printk: Avoid irq_work for printk_deferred() on suspend
printk: Avoid scheduling irq_work on suspend
printk: Allow printk_trigger_flush() to flush all types
tracing: Switch to use %ptSp
scsi: snic: Switch to use %ptSp
scsi: fnic: Switch to use %ptSp
s390/dasd: Switch to use %ptSp
ptp: ocp: Switch to use %ptSp
pps: Switch to use %ptSp
PCI: epf-test: Switch to use %ptSp
net: dsa: sja1105: Switch to use %ptSp
mmc: mmc_test: Switch to use %ptSp
media: av7110: Switch to use %ptSp
ipmi: Switch to use %ptSp
igb: Switch to use %ptSp
e1000e: Switch to use %ptSp
...
Skipping power ungate exposed some scenarios that will fail
like below:
```
amdgpu: Register(0) [regVPEC_QUEUE_RESET_REQ] failed to reach value 0x00000000 != 0x00000001n
amdgpu 0000:c1:00.0: amdgpu: VPE queue reset failed
...
amdgpu: [drm] *ERROR* wait_for_completion_timeout timeout!
```
The underlying s2idle issue that prompted this commit is going to
be fixed in BIOS.
This reverts commit 2a6c826cfe.
Fixes: 2a6c826cfe ("drm/amd: Skip power ungate during suspend for VPE")
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Konstantin <answer2019@yandex.ru>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220812
Reported-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use common definitions for the fault bits in the IH sourc
data for the gmc9-12 memory hub faults
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to call amdgpu_vm_handle_fault() on page fault
on all gfx9 and newer parts to properly update the
page tables, not just for recoverable page faults.
Cc: stable@vger.kernel.org
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to call amdgpu_vm_handle_fault() on page fault
on all gfx9 and newer parts to properly update the
page tables, not just for recoverable page faults.
Cc: stable@vger.kernel.org
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mfd_add_hotplug_devices() assigns child platform devices with
PLATFORM_DEVID_AUTO, but the ACP machine drivers expect the platform
device names to never change. Use mfd_add_devices() instead and give
each cell a unique id.
Signed-off-by: Brady Norander <bradynorander@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise userspace may be fooled into believing it has a reserved VMID
when in reality it doesn't, ultimately leading to GPU hangs when SPM is
used.
Fixes: 80e709ee6e ("drm/amdgpu: add option params to enforce process isolation between graphics and compute")
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Natalie Vock <natalie.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On old GPUs, it may be an issue that handling the interrupts from
VM faults is too slow and the interrupt handler (IH) ring may
overflow, which can cause an eventual hang.
Delegate the processing of all VM faults to the soft
IRQ handler ring.
As a result, we spend much less time in the IRQ handler that
interacts with the HW IH ring, which significantly reduces the
chance of hangs/reboots.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On old GPUs, it may be an issue that handling the interrupts from
VM faults is too slow and the interrupt handler (IH) ring may
overflow, which can cause an eventual hang.
Delegate the processing of all VM faults to the soft
IRQ handler ring.
As a result, we spend much less time in the IRQ handler that
interacts with the HW IH ring, which significantly reduces the
chance of hangs/reboots.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On old GPUs, it may be an issue that handling the interrupts from
VM faults is too slow and the interrupt handler (IH) ring may
overflow, which can cause an eventual hang.
Delegate the processing of all VM faults to the soft
IRQ handler ring.
As a result, we spend much less time in the IRQ handler that
interacts with the HW IH ring, which significantly reduces the
chance of hangs/reboots.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The VM_CONTEXT1_PROTECTION_FAULT_MCCLIENT register
doesn't exist on GMC v6 so we can't print the MC client as a
string like we do on GMC v7-v8. However, we still print the
mc_id from VM_CONTEXT1_PROTECTION_FAULT_STATUS.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Extra drm-misc-next for v6.19-rc1:
UAPI Changes:
- Add support for drm colorop pipeline.
- Add COLOR PIPELINE plane property.
- Add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE.
Cross-subsystem Changes:
- Attempt to use higher order mappings in system heap allocator.
- Always taint kernel with sw-sync.
Core Changes:
- Small fixes to drm/gem.
- Support emergency restore to drm-client.
- Allocate and release fb_info in single place.
- Rework ttm pipelined eviction fence handling.
Driver Changes:
- Support the drm color pipeline in vkms, amdgfx.
- Add NVJPG driver for tegra.
- Assorted small fixes and updates to rockchip, bridge/dw-hdmi-qp,
panthor.
- Add ASL CS5263 DP-to-HDMI simple bridge.
- Add and improve support for G LD070WX3-SL01 MIPI DSI, Samsung LTL106AL0,
Samsung LTL106AL01, Raystar RFF500F-AWH-DNN, Winstar WF70A8SYJHLNGA,
Wanchanglong w552946aaa, Samsung SOFEF00, Lenovo X13s panel.
- Add support for it66122 to it66121.
- Support mali-G1 gpu in panthor.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/aa5cbd50-7676-4a59-bbed-e8428af86804@linux.intel.com
The CPER ring debugfs read code always writes a 12-byte header when the
file is read for the first time (*offset == 0):
copy_to_user(buf, ring_header, 12);
But the code never checks whether the user buffer (@size) is at least
12 bytes long. After writing the 12-byte header, the code then gives the
full original @size to the CPER payload handler:
record_req->buf_size = size;
This means the function can write:
12 bytes (header) + payload bytes (up to @size)
into a buffer that is only @size bytes big. In other words, the kernel
may write more data than the user asked for. This can overflow the user
buffer.
The fix is:
- If the user buffer is smaller than 12 bytes on the first read,
return -EINVAL instead of copying the header.
- After writing the 12-byte header, subtract 12 from @size and pass
the reduced size to record_req->buf_size. This ensures the CPER
payload only uses the remaining free space in the buffer.
Reads after the first one (*offset != 0) do not write the header, so
their behavior stays exactly the same. The only user-visible change is
that tiny buffers now fail safely instead of risking an overflow.
Fixes:
drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c:523
amdgpu_ras_cper_debugfs_read()
warn: userbuf overflow? is 'ring_header_size' <= 'size'
Fixes: 527e3d4033 ("drm/amd/ras: Add CPER ring read for uniras")
Reported by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Xiang Liu <xiang.liu@amd.com>
Cc: Tao Zhou <tao.zhou1@amd.com>
Cc: Yang Wang <kevinyang.wang@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If memory is freed we need to nullify the pointer or the caller
might call kfree again (eg: amdgpu_cs_parser_fini calls kfree on
all non-null job pointers).
Fixes: db36632ea5 ("drm/amdgpu: clean up and unify hw fence handling")
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The original patch introduced additional latency during boot time
because it triggers a driver reload to avoid a CP hang when the driver
is reloaded multiple times. This has been addressed with a more generic
solution that triggers the GPU reset only during the unload phase,
avoiding extra latency during boot time. For this reason, this commit
reverts the original change.
This reverts commit 72a98763b4.
This patch should only be applied if commit:
4355e61835e7 ("drm/amdgpu: Fix GFX hang on SteamDeck when amdgpu is reloaded")
is present.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When trying to unload amdgpu in the SteamDeck (TTY mode), the following
set of errors happens and the system gets unstable:
[..]
[drm] Initialized amdgpu 3.64.0 for 0000:04:00.0 on minor 0
amdgpu 0000:04:00.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on gfx_0.0.0 (-110).
amdgpu 0000:04:00.0: amdgpu: ib ring test failed (-110).
[..]
amdgpu 0000:04:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
amdgpu 0000:04:00.0: amdgpu: Failed to disable gfxoff!
amdgpu 0000:04:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
amdgpu 0000:04:00.0: amdgpu: Failed to disable gfxoff!
[..]
When the driver initializes the GPU, the PSP validates all the firmware
loaded, and after that, it is not possible to load any other firmware
unless the device is reset. What is happening in the load/unload
situation is that PSP halts the GC engine because it suspects that
something is amiss. To address this issue, this commit ensures that the
GPU is reset (mode 2 reset) in the unload sequence.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The MMIO_REMAP BO is a special 4K IO page that does not have a ttm_tt
behind it. However, amdgpu_ttm_tt_pde_flags() was treating it like
normal TT/doorbell/preempt memory and unconditionally accessed
ttm->caching. For the MMIO_REMAP BO, ttm is NULL, so this leads to a
NULL pointer dereference when computing PDE flags.
Fix this by checking that ttm is non-NULL before reading ttm->caching.
This prevents the crash for MMIO_REMAP and also makes the code more
defensive if other BOs ever come through without a ttm_tt.
Fixes: fb5a52dbe9 ("drm/amdgpu: Implement TTM handling for MMIO_REMAP placement")
Suggested-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Tested-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0db94da5a0)
This fixes sparse mappings (aka. partially resident textures).
Check the correct flags.
Since a recent refactor, the code works with uAPI flags (for
mapping buffer objects), and not PTE (page table entry) flags.
Fixes: 6716a823d1 ("drm/amdgpu: rework how PTE flags are generated v3")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8feeab26c8)
