iio_trigger_set_drvdata() sets the trigger device parent to first
argument of viio_trigger_alloc(), no need to do it again in the driver
code.
In xadc_alloc_trigger, given dev is indio_dev->dev.parent, and we call
devm_iio_trigger_alloc wit dev as argument, we do not have to set
data->trig->dev.parent to indio_dev->dev.parent anymore.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210309193620.2176163-9-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When allocated with [devm_]iio_trigger_alloc(), set trig device parent to
the device the trigger is allocated for by default.
It can always be reassigned in the probe routine.
Change iio_trigger_alloc() API to add the device pointer to be coherent
with devm_iio_trigger_alloc, using similar interface to
iio_device_alloc().
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210309193620.2176163-2-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Currently AD7124-8 driver cannot use more than 8 IIO channels
because it was assigning the channel configurations bijectively
to channels specified in the device-tree. This is not possible
to do when using more than 8 channels as AD7124-8 has only 8
configuration registers.
To allow the user to use all channels at once the driver
will keep in memory configurations for all channels but
will program only 8 of them at a time on the device.
If multiple channels have the same configuration, only
one configuration register will be used. If there
are more configurations than available registers only
the last 8 used configurations will be allowed to exist
on the device in a LRU fashion.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210311091154.47785-2-alexandru.tachici@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
As pointed by Lars, this doesn't require a zero-check. Also, while looking
at this a little closer at it (again), the masking can be done later, as
there is a zero-check for 'mode_flags' anyway, which returns -EINVAL. And
we only need the 'mode_flags' later in the logic.
This change is more of a tweak.
Fixes: e36db6a069 ("iio: kfifo: add devm_iio_kfifo_buffer_setup() helper")
Cc: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20210306162834.7339-1-ardeleanalex@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Allow setting frequency below 1Hz or sub 1Hz precision.
Useful for slow sensors like ALS.
Test frequency is set properly:
modprobe iio-trig-hrtimer && \
mkdir /sys/kernel/config/iio/triggers/hrtimer/t1 && \
cd /sys/bus/iio/devices/triggerX ;
for i in 1 .1 .01 .001 ; do
echo $i > sampling_frequency
cat sampling_frequency
done
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210226014733.2108544-1-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This control on the gain of a measurement used for time of flight sensing
is standard but the expected values for different enviroments may not be.
As we cannot have the same ABI element documented in two files, add a
generic version to sysfs-bus-iio-proximity and a note on the expected
value vs measuring environment for the as3935.
Fixes
$ scripts/get_abi.pl validate
Warning: /sys/bus/iio/devices/iio:deviceX/sensor_sensitivity is defined 2 times: ./Documentation/ABI/testing/sysfs-bus-iio-distance-srf08:0 ./Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935:8
Cc: Matt Ranostay <matt.ranostay@konsulko.com>
Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20210117153816.696693-7-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
These contain only one entry for out_current_heater_raw (_available).
Document this in a new sysfs-bus-iio-humidity file, and make it a little
more generic by allowing for non 0/1 values.
Fixes
$ scripts/get_abi.pl validate
Warning: /sys/bus/iio/devices/iio:deviceX/out_current_heater_raw is defined 2 times: ./Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010:0 ./Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc100x:0
Warning: /sys/bus/iio/devices/iio:deviceX/out_current_heater_raw_available is defined 2 times: ./Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010:1 ./Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc100x:1
Cc: Eugene Zaikonnikov <ez@norphonic.com>
Cc: Matt Ranostay <matt.ranostay@konsulko.com>
Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20210117153816.696693-6-jic23@kernel.org
With this patch, we don't force users to define the IMU scaled internal
sampling rate once in the devicetree. Now it's dynamically calculated
at runtime depending on the desired output rate given by users.
Calculating the sync_scale dynamically gives us better chances of
achieving a perfect/integer value for DEC_RATE (thus giving more
flexibility). The math is:
1. lcm of the input clock and the desired output rate.
2. get the highest multiple of the previous result lower than the adis
max rate.
3. The last result becomes the IMU sample rate. Use that to calculate
SYNC_SCALE and DEC_RATE (to get the user output rate).
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210218114039.216091-3-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When using PPS mode, the input clock needs to be scaled so that we have
an IMU sample rate between (optimally) 4000 and 4250. After this, we can
use the decimation filter to lower the sampling rate in order to get what
the user wants. Optimally, the user sample rate is a multiple of both the
IMU sample rate and the input clock. Hence, calculating the sync_scale
dynamically gives us better chances of achieving a perfect/integer value
for DEC_RATE. The math here is:
1. lcm of the input clock and the desired output rate.
2. get the highest multiple of the previous result lower than the adis
max rate.
3. The last result becomes the IMU sample rate. Use that to calculate
SYNC_SCALE and DEC_RATE (to get the user output rate).
Fixes: 326e235755 ("iio: imu: adis16480: Add support for external clock")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210218114039.216091-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Since the new change to the IIO buffer infrastructure, the buffer/ and
scan_elements/ directories have been merged into bufferY/ to have some
attributes available per-buffer.
This change updates the ABI docs to reflect this change.
The hwfifo attributes are not updated, as for now these should be used
via the legacy buffer/ directory until they are moved into core.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210217083438.37865-2-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Some 2-in-1 laptops / convertibles with 360° (yoga-style) hinges,
have 2 accelerometers, 1 in their base and 1 in their display.
In many cases the kernel can detect the location of each accelerometer
based on e.g. information from the ACPI tables.
It is important for userspace to know the location of the 2 accelerometers.
Rather then adding a new sysfs-attribute for this we can relay this
information to userspace by using standardized label strings for this.
This mirrors how this is done for proximity sensors.
This commit documents 2 new standardized label strings for this purpose:
"accel-base"
"accel-display"
Note the "base" and "display" suffixes were chosen to match the values
used for the systemd/udev hwdb.d/60-sensor.hwdb file's ACCEL_LOCATION
property.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Mark Pearson <mpearson@lenovo.com>
Cc: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210215191003.698888-2-hdegoede@redhat.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add an entry to Documentation/ABI/testing/sysfs-bus-iio for
the new device label sysfs-attribute support.
And document the standardized labels which may be used with proximity
sensors to hint userspace about the intended use of the sensor.
Using labels to differentiate between the multiple proximity sensors
which a modern laptop/tablet may have was discussed in this thread:
https://lore.kernel.org/linux-iio/9f9b0ff6-3bf1-63c4-eb36-901cecd7c4d9@redhat.com/
As mentioned there the "proximity-wifi*" labels are already being used
in this manner on some chromebooks, see e.g.:
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi
And the "proximity-palmrest" and "proximity-lap" labels are intended
to be used with the lap and palmrest sensors found in recent Lenovo
ThinkPad models.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Mark Pearson <mpearson@lenovo.com>
Cc: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210215191003.698888-1-hdegoede@redhat.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Before, when reading/writing the hysteresis of als, incli-3d, press, and
rotation sensor, we will get invalid argument error.
This patch add more sensitivity data fields for these sensors, so that
these sensors can get sensitivity index and return correct hysteresis
value.
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Link: https://lore.kernel.org/r/20210201054921.18214-3-xiang.ye@intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
No functional change has been made with this patch. The main intent here
is to reduce code repetition of getting sensitivity attribute.
In the current implementation, sensor_hub_input_get_attribute_info() is
called from multiple drivers to get attribute info for sensitivity
field. Moving this to common place will avoid code repetition.
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210201054921.18214-2-xiang.ye@intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This change makes use of the new IIO buffer API to read data from an IIO
buffer.
It doesn't read the /sys/bus/iio/devices/iio:deviceX/scan_elements dir
anymore, it reads /sys/bus/iio/devices/iio:deviceX/bufferY, where all the
scan_elements have been merged together with the old/classical buffer
attributes.
And it makes use of the new IIO_BUFFER_GET_FD_IOCTL ioctl to get an FD for
the IIO buffer for which to read data from.
It also does a quick sanity check to see that -EBUSY is returned if reading
the chardev after the ioctl() has succeeded.
This was tested with the following cases:
1. Tested buffer0 works with ioctl()
2. Tested that buffer0 can't be opened via /dev/iio:deviceX after ioctl()
This check should be omitted under normal operation; it's being done
here to check that the driver change is sane
3. Moved valid buffer0 to be buffer1, and tested that data comes from it
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210215104043.91251-25-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
