Pull ARM/SoC driver updates from Arnd Bergmann:
"These are updates to SoC specific drivers that did not have another
subsystem maintainer tree to go through for some reason:
- Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC
that is getting added through the MIPS tree.
- There are new soc_device identification drivers for TI K3, Qualcomm
MSM8939
- New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and
Hisilicon hi6220
- The SCMI firmware interface can now work across ARM SMC/HVC as a
transport.
- Mediatek platforms now use a new driver for their "MMSYS" hardware
block that controls clocks and some other aspects in behalf of the
media and gpu drivers.
- Some Tegra processors have improved power management support,
including getting woken up by the PMIC and cluster power down
during idle.
- A new v4l staging driver for Tegra is added.
- Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and
Tegra"
* tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits)
clk: sprd: fix compile-testing
bus: bt1-axi: Build the driver into the kernel
bus: bt1-apb: Build the driver into the kernel
bus: bt1-axi: Use sysfs_streq instead of strncmp
bus: bt1-axi: Optimize the return points in the driver
bus: bt1-apb: Use sysfs_streq instead of strncmp
bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method
bus: bt1-apb: Fix show/store callback identations
bus: bt1-apb: Include linux/io.h
dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding
memory: Add Baikal-T1 L2-cache Control Block driver
bus: Add Baikal-T1 APB-bus driver
bus: Add Baikal-T1 AXI-bus driver
dt-bindings: bus: Add Baikal-T1 APB-bus binding
dt-bindings: bus: Add Baikal-T1 AXI-bus binding
staging: tegra-video: fix V4L2 dependency
tee: fix crypto select
drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static
soc: ti: add k3 platforms chipid module driver
dt-bindings: soc: ti: add binding for k3 platforms chipid module
...
Pull ARM SoC updates from Arnd Bergmann:
"One new platform gets added, the Realtek RTD1195, which is an older
Cortex-a7 based relative of the RTD12xx chips that are already
supported in arch/arm64. The platform may also be extended to support
running 32-bit kernels on those 64-bit chips for memory-constrained
machines.
In the Renesas shmobile platform, we gain support for "RZ/G1H" or
R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores,
originally released in 2016 as one of the last high-end 32-bit
designs.
There is ongoing cleanup for the integrator, tegra, imx, and omap2
platforms, with integrator getting very close to the goal of having
zero code in arch/arm/, and omap2 moving more of the chip specifics
from old board code into device tree files.
The Versatile Express platform is made more modular, with built-in
drivers now becoming loadable modules. This is part of a greater
effort for the Android OS to have a common kernel binary for all
platforms and any platform specific code in loadable modules.
The PXA platform drops support for Compulab's pxa2xx boards that had
rather unusual flash and PCI drivers but no known users remaining. All
device drivers specific to those boards can now get removed as well.
Across platforms, there is ongoing cleanup, with Geert and Rob
revisiting some a lot of Kconfig options"
* tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
ARM: omap2: fix omap5_realtime_timer_init definition
ARM: zynq: Don't select CONFIG_ICST
ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs
clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE
ARM: davinci: fix build failure without I2C
power: reset: vexpress: fix build issue
power: vexpress: cleanup: use builtin_platform_driver
power: vexpress: add suppress_bind_attrs to true
Revert "ARM: vexpress: Don't select VEXPRESS_CONFIG"
MAINTAINERS: pxa: remove Compulab arm/pxa support
ARM: pxa: remove Compulab pxa2xx boards
bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe()
soc: imx: move cpu code to drivers/soc/imx
ARM: imx: move cpu definitions into a header
ARM: imx: use device_initcall for imx_soc_device_init
ARM: imx: pcm037: make pcm970_sja1000_platform_data static
bus: ti-sysc: Timers no longer need legacy quirk handling
ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter
ARM: dts: Configure system timers for omap2
ARM: dts: Configure system timers for ti81xx
...
This allows C code to make use of compilers with support for output
variables along the fallthrough path via preprocessor define:
CONFIG_CC_HAS_ASM_GOTO_OUTPUT
[ This is not used anywhere yet, and currently released compilers don't
support this yet, but it's coming, and I have some local experimental
patches to take advantage of it when it does - Linus ]
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge yet more updates from Andrew Morton:
- More MM work. 100ish more to go. Mike Rapoport's "mm: remove
__ARCH_HAS_5LEVEL_HACK" series should fix the current ppc issue
- Various other little subsystems
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (127 commits)
lib/ubsan.c: fix gcc-10 warnings
tools/testing/selftests/vm: remove duplicate headers
selftests: vm: pkeys: fix multilib builds for x86
selftests: vm: pkeys: use the correct page size on powerpc
selftests/vm/pkeys: override access right definitions on powerpc
selftests/vm/pkeys: test correct behaviour of pkey-0
selftests/vm/pkeys: introduce a sub-page allocator
selftests/vm/pkeys: detect write violation on a mapped access-denied-key page
selftests/vm/pkeys: associate key on a mapped page and detect write violation
selftests/vm/pkeys: associate key on a mapped page and detect access violation
selftests/vm/pkeys: improve checks to determine pkey support
selftests/vm/pkeys: fix assertion in test_pkey_alloc_exhaust()
selftests/vm/pkeys: fix number of reserved powerpc pkeys
selftests/vm/pkeys: introduce powerpc support
selftests/vm/pkeys: introduce generic pkey abstractions
selftests: vm: pkeys: use the correct huge page size
selftests/vm/pkeys: fix alloc_random_pkey() to make it really random
selftests/vm/pkeys: fix assertion in pkey_disable_set/clear()
selftests/vm/pkeys: fix pkey_disable_clear()
selftests: vm: pkeys: add helpers for pkey bits
...
Currently copy_string_kernel is just a wrapper around copy_strings that
simplifies the calling conventions and uses set_fs to allow passing a
kernel pointer. But due to the fact the we only need to handle a single
kernel argument pointer, the logic can be sigificantly simplified while
getting rid of the set_fs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Link: http://lkml.kernel.org/r/20200501104105.2621149-3-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "seq_file: Introduce DEFINE_SEQ_ATTRIBUTE() helper macro".
As discussed in
https://lore.kernel.org/lkml/20191129222310.GA3712618@kroah.com/, we could
introduce a new helper macro to reduce losts of boilerplate code, vmstat
and kprobes is the example which covert to use it, if this is accepted, I
will send out more cleanups.
This patch (of 3):
Introduce DEFINE_SEQ_ATTRIBUTE() helper macro to decrease code duplication.
[akpm@linux-foundation.org: coding style fixes]
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: http://lkml.kernel.org/r/20200509064031.181091-1-wangkefeng.wang@huawei.com
Link: http://lkml.kernel.org/r/20200509064031.181091-2-wangkefeng.wang@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Current readahead for FAT entries is very simple but is having some flaws,
so it is not working well for some environments. This patch improves the
readahead more or less.
The key points of modification are,
- make the readahead size tunable by using bdi->ra_pages
- care the bdi->io_pages to avoid the small size I/O request
- update readahead window before fully exhausting
With this patch, on slow USB connected 2TB hdd:
[before]
383.18sec
[after]
51.03sec
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: hyeongseok.kim <hyeongseok.kim@lge.com>
Reviewed-by: hyeongseok.kim <hyeongseok.kim@lge.com>
Link: http://lkml.kernel.org/r/87d08e1dlh.fsf@mail.parknet.co.jp
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some init systems (eg. systemd) have init at their own paths, for
example, /usr/lib/systemd/systemd. A compatibility symlink to one of the
hardcoded init paths is provided by another package, usually named
something like systemd-sysvcompat or similar.
Currently distro maintainers who are hands-off on the bootloader are more
or less required to include those compatibility links as part of their
base distribution, because it's hard to migrate away from them since
there's a risk some users will not get the message to set init= on the
kernel command line appropriately.
Moreover, for distributions where the init system is something the
distribution itself is opinionated about (eg. Arch, which has systemd in
the required `base` package), we could usually reasonably configure this
ahead of time when building the distribution kernel. However, we
currently simply don't have any way to configure the kernel to do this.
Here's an example discussion where removing sysvcompat was discussed by
distro maintainers[0].
This patch adds a new Kconfig tunable, CONFIG_DEFAULT_INIT, which if set
is tried before the hardcoded fallback list. So the order of precedence
is now thus:
1. init= on command line (on failure: panic)
2. CONFIG_DEFAULT_INIT (on failure: try #3)
3. Hardcoded fallback list (on failure: panic)
This new config parameter will allow distribution maintainers to move away
from these compatibility links safely, without having to worry that their
users might not have the right init=.
There are also two other benefits of this over having the distribution
maintain a symlink:
1. One of the value propositions over simply having distributions
maintain a /sbin/init symlink via a package is that it also frees
distributions which have a preferred default, but not mandatory, init
system from having their package manager fight with their users for
control of /{s,}bin/init. Instead, the distribution simply makes
their preference known in CONFIG_DEFAULT_INIT, and if the user
installs another init system and uninstalls the default one they can
still make use of /{s,}bin/init and friends for their own uses. This
makes more cases Just Work(tm) without the user having to perform
extra configuration via init=.
2. Since before this we don't know which path the distribution actually
_intends_ to serve init from, we don't pr_err if it is simply
missing, and usually will just silently put the user in a /bin/sh
shell. Now that the distribution can make a declaration of intent, we
can be more vocal when this init system fails to launch for any
reason, even if it's simply because no file exists at that location,
speeding up the palaver of init/mount dependency/etc debugging a bit.
[0]: https://lists.archlinux.org/pipermail/arch-dev-public/2019-January/029435.html
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: http://lkml.kernel.org/r/20200522160234.GA1487022@chrisdown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ELFNOTE_START allows callers to specify flags for .pushsection assembler
directives. All callsites but ELF_NOTE use "a" for SHF_ALLOC. For vdso's
that explicitly use ELF_NOTE_START and BUILD_SALT, the same section is
specified twice after preprocessing, once with "a" flag, once without.
Example:
.pushsection .note.Linux, "a", @note ;
.pushsection .note.Linux, "", @note ;
While GNU as allows this ordering, it warns for the opposite ordering,
making these directives position dependent. We'd prefer not to precisely
match this behavior in Clang's integrated assembler. Instead, the non
__ASSEMBLY__ definition of ELF_NOTE uses
__attribute__((section(".note.Linux"))) which is created with SHF_ALLOC,
so let's make the __ASSEMBLY__ definition of ELF_NOTE consistent with C
and just always use "a" flag.
This allows Clang to assemble a working mainline (5.6) kernel via:
$ make CC=clang AS=clang
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/913
Link: http://lkml.kernel.org/r/20200325231250.99205-1-ndesaulniers@google.com
Debugged-by: Ilie Halip <ilie.halip@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While "git am" can apply an mbox file containing multiple patches (e.g.
as created by b4[1], or a patch bundle downloaded from patchwork),
checkpatch does not have proper support for that. When operating on an
mbox, checkpatch will merge all detected tags, and complain falsely about
duplicates:
WARNING: Duplicate signature
As modifying checkpatch to reset state in between each patch is a lot of
work, a simple solution is splitting the mbox into individual patches, and
invoking checkpatch for each of them. Fortunately checkpatch can read a
patch from stdin, so the classic "formail" tool can be used to split the
mbox, and pipe all individual patches to checkpatch:
formail -s scripts/checkpatch.pl < my-mbox
However, when reading a patch file from standard input, checkpatch calls
it "Your patch", and reports its state as:
Your patch has style problems, please review.
or:
Your patch has no obvious style problems and is ready for submission.
Hence it can be difficult to identify which patches need to be reviewed
and improved.
Fix this by replacing "Your patch" by (the first line of) the email
subject, if present.
Note that "git mailsplit" can also be used to split an mbox, but it will
create individual files for each patch, thus requiring cleanup afterwards.
Formail does not have this disadvantage.
[1] https://git.kernel.org/pub/scm/utils/b4/b4.git
[joe@perches.com: reduce cpu usage]
Link: http://lkml.kernel.org/r/c9d89bb24c7414142414c60371e210fdcf4617d2.camel@perches.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joe Perches <joe@perches.com>
Cc: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Link: http://lkml.kernel.org/r/20200505132613.17452-1-geert+renesas@glider.be
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
