Pull networking updates from Jakub Kicinski:
"One of the 'small improvements all over the place' releases for us.
It's hard to draw any direct comparisons because summer vacations
disrupted our patch processing (and presumably - generation) quite a
bit.
Quick and dirty count suggests we (Paolo and I) merged a very similar
number of net (632) and net-next (648) patches. This is not telling
the full story either because 1/3 to 1/2 of the net-next patches also
*seem* like AI-driven low priority fixes, cleanups and clarifications.
We are completely overwhelmed, of course. The glimmer of hope is that
we secured sufficient LLM budget and access (thank you Meta!) to run
reviews with multiple frontier models on each patch. This eliminates
some hallucinations. That said, in terms of review, the LLMs can only
do so much.
The sad truth is that our APIs (especially for rare events like PCIe
errors, timeouts etc) have always been racy, and now LLMs don't let us
ignore that. I expect our direction for the next release will be to
tweak the reviews a little bit more, but start shifting focus to
letting the LLMs take care of the busy work - managing patchwork,
automating common process complaints, editing commit messages, and
maybe applying patches which already got "reviewed-by" tags from
people we trust...
Core & protocols:
- A few steps lowering rtnl_lock dependence:
- per-netns netdev unregistration for select SW drivers (e.g.
veth, ipvlan, tunnels)
- rtnl_lock-less FIB rule changes (RTM_NEWRULE and RTM_DELRULE)
- prepare software drivers and TC qdiscs for rtnl_lock-less GET
- Support BIG TCP (>64kB TSO) in UDP tunnels (vxlan, geneve)
- Support buffers larger than PAGE_SIZE in devmem zero-copy API
- Improve MPTCP handling of extreme memory pressure handling, when
out-of-order queue had to be pruned
- Report the per-group user count via RTM_GETMULTICAST
- Expose the route deletion reason in RTM_DELROUTE
- Add a SO_RIGHTS_NOTRUNC option to UNIX sockets to enable more
useful handling of LSM denials when receiving SCM_RIGHTS messages:
instead of truncating the message at the first blocked fd, keep
every fd slot and store the LSM errno in the blocked slot
- IPv6 Segment Routing - support looking up the post-encap SID
(address) in a different/specified routing table
- Support PRP RedBox (interlink) creation
- Support per-nexthop UDP dst port in VXLAN
- Continue converting getsockopt callbacks in a number of protocols
to iov_iter
Ethernet:
- Merge initial CXL support for AMD/Solarflare NICs (shared branch
with the CXL tree)
- New drivers:
- ADIN1140 10BASE-T1S MACPHY
- Initial skeleton of Intel iXD and ZTE Dinghai drivers
- High-speed NICs:
- AMD/Pensando:
- support firmware flashing
- Cisco (enic):
- SR-IOV V2 admin channel and MBOX protocol
- Huawei (hns3):
- support for ethtool pfc_prevention_tout
- nVidia/Mellanox:
- support sharing bandwidth control across interfaces
of the same device
- Marvell (octeontx2-pf):
- link RQ page pools to netdev for Netlink stats
- Google vNIC:
- XDP metadata support for DQ RDA
- Microsoft vNIC:
- support forcing full-page RX buffers
- Other NICs:
- Synopsys IP:
- eic7700: support for eth1
- Microchip (lan743x):
- support for RMII interface
- Wangxun:
- support for ethtool -G and -C for VFs
- add Tx timeout and PCIe error handling
- Intel (igb/igc):
- RSS key get/set support
- support for forcing link speed without auto-negotiation
- Switches:
- NXP (dpaa2):
- support bonding/LAG offload
- Mediatek:
- mt7530: EN7528 support
- initial support for MT7628
- Micrel (ksz8/9):
- refactoring work to move towards library model
- PTP support for KSZ8463
- nVidia/Mellanox:
- support rtnl-lock-less ethtool callbacks
- Realtek:
- rtl8366rb: use generic RTL83xx code
- support SGMII and HSGMII for RTL8367S
- PHYs:
- Airoha:
- EcoNet EN7528 PHY support
- DAPU Telecom
- DAPU Telecom DAP8211R(I) Gigabit PHY support
- Realtek:
- support RTL8261C_CG
- support RTL8261D
Wireless:
- nl80211: per-link statistics support for multi-link operation
- mac80211: AQL/airtime-fairness support for multicast
- Merge Peripheral Authentication Service (PAS) / TEE support for
ath12k (shared branch with the firmware/qcom tree)
- New drivers:
- mm81x for Morse Micro Long-Range S1G devices
- nxpwifi for NXP devices (mostly forked off from mwifiex)
- Driver changes:
- Broadcom (brcmfmac):
- DPP support, some Cypress part update
- MediaTek (mt76):
- mt7928 support
- mt7925 NAN support
- mt7996 AP powersave improvements
- Qualcomm (ath12k):
- much kernel infrastructure integration work
- AHB platform MultiPD support
- Realtek (rt89):
- LED support
- RTL8922DE support
- dual-BT coex for RTL8922D
- Intel:
- new FW version support
Bluetooth:
- HCI: add support for Shorter Connection Interval (SCI) feature
- af_bluetooth: add minimal context analysis annotations
- Driver changes:
- Intel:
- add Bluetooth SAR revision 2 support
- add vendor_reset PCI sysfs for PLDR
- Mediatek:
- add USB IDs for MT7902 and MT7922 devices
- Realtek:
- add USB IDs for 8761CU and 8852BE devices
- NXP:
- add M.2 Bluetooth device support using pwrseq
Misc:
- DPLL support for manual/numerical oscillator control (NCO)
(implement in zl3073x)
- MCTP support for MCTP over USB v1.1 (DMTF DSP0283)
- Power-over-Ethernet: support Realtek PSE controllers
- Remove the IBM EHEA driver
- Remove tulip/xircom_cb driver"
* tag 'net-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1433 commits)
net/mlx5e: do not HW-GRO coalesce small frames
net: openvswitch: fix nf_connlabels leak in ovs_ct_init
net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs()
net: openvswitch: fix flow mask use-after-free on flow deletion
sctp: stop processing a packet once its association is deleted
dpll: zl3073x: add PTP clock support
dpll: zl3073x: add channel ToD, phase step and TIE operations
dpll: zl3073x: scale poll interval proportionally to timeout
ptp: vmclock: prevent read-only mappings from becoming writable
ipv4: reject undersized MTUs in ip_do_fragment()
bonding: initialize err for empty target lists
net: dsa: initial support for MT7628 embedded switch
net: dsa: initial MT7628 tagging driver
net: phy: mediatek: add phy driver for MT7628 built-in Fast Ethernet PHYs
dt-bindings: net: dsa: add MT7628 ESW
net: pse-pd: realtek-pse-mcu: add UART transport
net: pse-pd: realtek-pse-mcu: add I2C transport
net: pse-pd: add Realtek PSE MCU core
dt-bindings: net: pse-pd: add bindings for Realtek PSE MCU
vsock: use sock_error() to consume sk_err after a failed connect
...
Pull crypto update from Herbert Xu:
"API:
- Add af_alg_restrict sysctl and white list
- Fix potential suspend/resume races in hwrng
Algorithms:
- Optimize vli additive operations using compiler builtins in ecc
Drivers:
- Remove unsafe/deprecated algorithms from qce
- Mark qce as BROKEN
- Add runtime PM and interconnect bandwidth scaling support to qce
- Remove crypto_rng from qcom, sun8i and caam
- Fix SG list issues in iaa
- Fix SEV init path bugs in ccp"
* tag 'v7.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (122 commits)
crypto: lskcipher - propagate errors from unaligned crypt
crypto: keembay - use crypto_memneq() to compare CCM AEAD tags
crypto: keembay - use crypto_memneq() to compare GCM AEAD tags
crypto: sa2ul - use crypto_memneq() to compare AEAD tag
hwrng: drivers - use named initializers for acpi_device_id
crypto: qce - fix CCM AAD buffer underallocation
crypto: iaa - unmap dst before software fallback on decompress
crypto: iaa - use bounce buffer for multi-sg decompress input
crypto: iaa - avoid counting fallback decompression bytes
crypto: iaa - fall back to software for multi-entry scatterlists
hwrng: core - Stop/start hwrng_fillfn() kthread before/after suspend-resume
crypto: hisilicon/sec2 - fix CCM algorithm long packet failure
crypto: eip93 - use struct_size() and flexible array for ring allocation
crypto: krb5 - use kfree_sensitive() for derived key buffers
crypto: af_alg - Stop after finding name in allowlist
crypto: af_alg - Replace 'bool privileged' with flags
crypto: af_alg - Make cbc(paes) privileged-only
hwrng: imx-rngc - Disable clock on registration failure
crypto: qat - remove dead ADF_HEX code
crypto: qce - simplify qce_handle_request
...
Pull driver core updates from Danilo Krummrich:
"container_of:
- Apply typeof_member(), remove the local __mptr variable to
eliminate variable shadowing warnings on nested container_of()
calls, and remove unnecessary parentheses
core:
- Add driver name to probe debug print for initcall_debug
- Avoid repeatedly printing the same 'Fixed dependency cycle' log
- Unwind device_add() on attribute creation failure in
attribute_container_add_class_device()
- Remove statistics group if encryption group creation fails in
transport_add_class_device()
debugfs:
- Fix lockdown check for mmap_prepare()
- Warn if file creation failed due to uninitialized debugfs
device property:
- Implement fw_devlink support for software nodes by adding
software_node_add_links(), which creates fwnode links from
DEV_PROP_REF properties to enable automatic probe ordering. Add
kunit-managed fwnode helpers and test coverage
- Fix infinite loop in fwnode_for_each_child_node() when the
secondary fwnode has more than one child. Add test cases
- Fix out-of-bounds access in software_node_get_reference_args() when
called with index -1 (UINT_MAX)
- Refactor to use RAII approach with __free()
- Add Bartosz Golaszewski as software node reviewer
firmware loader:
- Fix race where a sysfs fallback request can complete before being
queued as pending, leading to a use-after-free on the next fallback
request
- Reject 0-size built-in firmware and fail the build on empty
firmware files in CONFIG_EXTRA_FIRMWARE
kobject:
- Provide __KOBJ_ATTR() and __KOBJ_ATTR_RO/WO() initialization macros
and allow the constification of kobject attributes, enabling them
to reside in read-only memory
platform:
- Provide platform_device_set_of_node(), platform_device_set_fwnode(),
and platform_device_set_of_node_from_dev() helpers that encapsulate
firmware node reference counting for dynamically allocated platform
devices
Convert all in-tree users that manually assigned dev.of_node or
dev.fwnode, fixing a pre-existing refcount bug in powermac. Switch
to counting references of all firmware node types, not only OF
nodes
- Unify the release path for dynamically allocated platform devices
by removing platform_device_release_full(). Amend the fwnode setter
API contract to warn if a primary software node is overwritten. Add
KUnit tests for correct software node removal on device
unregistration
Rust:
- Auxiliary:
- Add registration_data_with() closure-based API for invariant
ForLt types
- Debugfs:
- Migrate BinaryWriter and BinaryReaderMut trait requirements
from kernel::transmute traits to zerocopy traits
- Device:
- Add BoundInternal device context and InternalBoundContext trait
for bus abstractions that need internal access to a bound
device.
- Make the lifetime on Core and CoreInternal invariant to prevent
coercion to shorter lifetimes
- Devres:
- Fix race between concurrent revokers where the losing revoker
could return before the winning revoker finished dropping the
inner data, causing use-after-free.
- Ensure revocation is complete before the device finishes
unbinding by making the synchronization bidirectional.
- Add DevresLt<F: ForLt>, a wrapper around Devres that shortens
'static back to the caller's borrow scope. Implement ForLt and
CovariantForLt for Bar, IoMem, and ExclusiveIoMem
- Driver:
- Switch from index-based to pointer-based device ID info lookup,
storing static references in driver_data. Centralize device ID
handling in device_id.rs, removing the open-coded ACPI/OF
matching logic and duplicate ID table from driver.rs
- I/O:
- Make I/O regions typed (with a dynamically-sized Region type
for the existing untyped case), create view types representing
subregions of a mapped I/O region, and add io_project!() for
safely creating subviews.
- Split Io into a base trait (IoBase) and an extension trait (Io)
with a blanket implementation, preventing implementers from
overriding provided methods that unsafe code relies on.
- Add a SysMem backend for shared system memory with volatile
access, and make Coherent implement Io via an I/O view type.
Add IoSysMap as sum type of Mmio and SysMem. Add copying
methods (memcpy_{from,to}io()) and read_val()/write_val() for
typed access.
- Replace dma_read!()/dma_write!() with io_read!()/io_write!()
for primitives and copying methods for aggregates; drop the old
macros. Convert nova-core to use I/O projection.
- Fix internal shortcut rule dispatch in the register!() macro,
remove unused rule arguments, and use path fragments for alias
destinations
- IRQ:
- Make irq::Registration compatible with lifetime-bound drivers
by removing the 'static bound on Handler/ThreadedHandler and
replacing Devres<RegistrationInner> with direct
request_irq()/free_irq() calls. Handlers can now directly own
lifetime-bound device resources
- PCI:
- Convert IrqVectorRegistration to a lifetime-annotated owning
type, giving drivers explicit control over the allocation
lifetime. IrqVector embeds a resolved IrqRequest, making the
conversion infallible. Remove the redundant
request_irq()/request_threaded_irq() wrappers from pci::Device.
- Add pci_irq_type() C helper and expose it via irq_type() on
IrqVectorRegistration and IrqVector, returning PCI_IRQ_MSIX,
PCI_IRQ_MSI, or PCI_IRQ_INTX.
- Mark pci::Device refcount methods inline
- Serdev:
- Add Rust abstractions for the serial device bus, including
serdev::Driver trait, serdev::Device wrapping struct
serdev_device, and serdev::Adapter implementing
RegistrationOps. Includes a sample driver. Markus Probst takes
over as serdev maintainer for both C and Rust code
- Misc:
- Split ForLt into a base trait (providing the Of<'a> GAT) and an
unsafe CovariantForLt subtrait guaranteeing covariance,
enabling invariant types (e.g. those containing Mutex<&'bound T>)
to participate in the ForLt abstraction.
- Fix Coherent read past EOF returning -ERANGE instead of zero.
- Fix firmware example UB by avoiding null-pointer ARef
misc:
- Avoid iattr allocation in kernfs listxattr by using
kernfs_iattrs_noalloc().
- Unregister SoC bus on early device registration failure.
- Remove unused DMA_FENCE_TRACE Kconfig symbol.
- Fix /sys/module path in comment.
- Refactor ISA bus init to remove nested blocks.
- Remove redundant nodemask clears in numa_init().
- Add kernel-doc for fwnode_operations and sys_soc.h, mark
internal property data as private for kernel-doc, and add
property.h/fwnode.h to driver-api infrastructure docs.
- Add MAINTAINERS entry for sys_soc.h"
* tag 'driver-core-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (129 commits)
rust: pci: expose the allocated interrupt type
PCI: Add pci_irq_type() to query the allocated interrupt type
rust: pci: remove request_irq() and request_threaded_irq() from Device
rust: pci: resolve IRQ in index() and embed IrqRequest in IrqVector
rust: pci: convert IrqVectorRegistration to a lifetime-managed owning type
kernfs: avoid iattr allocation in listxattr
rust: serdev: use ThisModule::as_ptr() instead of field access
ACPI/IORT: use platform_device_set_fwnode()
ACPI/APMT: use platform_device_set_fwnode()
firmware_loader: do not queue completed sysfs fallback requests
rust: pci: Mark Device refcount methods inline
rust: irq: make Registration compatible with lifetime-bound drivers
rust: net/phy: remove expansion from doc
rust: dma: return zero for Coherent reads past EOF
rust: io: register: use path fragment for alias destination
rust: io: register: remove unused rule arguments
rust: io: register: dispatch shortcut rules internally
MAINTAINERS: add sys_soc.h to DRIVER CORE
rust: debugfs: remove unsafe blocks from traits impl for Vec
rust: debugfs: migrate debugfs traits requirements to zerocopy
...
Pull gpio updates from Bartosz Golaszewski:
"GPIO core:
- extend the gpio-regmap abstraction layer with more features
allowing users to override configuration setting, translate
register values and masks and enable/disable interrupts
- extend GPIO kunit tests with suites verifying probe ordering by
software node devlink support and software node hogs
- shrink GPIO kunit initialization code
- coding style updates (remove commas from sentinels where
applicable)
- with all users now converted treewide to using real firmware node
links for software node GPIO lookup: remove the deprecated
label-matching mechanism from from GPIO core
- drop redundant return value check of nonseekable_open() in
gpiolib-cdev
- use IRQ trigger helpers where applicable
Driver updates:
- refactor error paths and logging in gpio-nomadik
- use more modern interfaces for getting resources in gpio-rockchip,
gpio-bt8xx and gpio-pca9570
- add missing MODULE_DEVICE_TABLE() to gpio-sifive and gpio-vf610
- drop unused FILONOFF macro from gpio-rcar
- extend build coverage of ioport GPIO drivers with COMPILE_TEST=y
- only enable the gpio-rtd driver by default with ARCH_REALTEK=y to
avoid bloating the build
- refactor coding style in several drivers
- use correct endianess translation in gpio-pcf85x
- add wake-up interrupt support to gpio-mvebu
- apply initial value in direction output setter in gpio-by-pinctrl
Misc:
- replace linux/gpio.h inclusions treewide with linux/gpio/legacy.h
which now exports all the deprecated APIs
- select GPIOLIB_LEGACY in Kconfig where required treewide
- use software nodes for gpio-keys in MFD drivers
Devicetree bindings:
- describe the realtek rtd1625 GPIO controller
- document new models for gpio-pca95xx and gpio-cadence
- document new property in gpio-rockchip"
* tag 'gpio-updates-for-v7.3-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (61 commits)
gpio: gpio-by-pinctrl: Apply initial value in direction output wrapper
dt-bindings: gpio: rockchip,gpio-bank: Add rockchip,grf property
gpio: Use IRQ trigger mask helpers
gpio: allow COMPILE_TEST for IOPORT drivers
gpio: realtek: Add driver for Realtek DHC RTD1625 SoC
gpio: regmap: Add IRQ enable/disable helpers
gpio: regmap: Add set_config callback
gpio: regmap: Add value_xlate callback
gpio: regmap: Add gpio_regmap_operation to extend reg_mask_xlate callback
gpio: regmap: Order kernel-doc descriptions with the actual appearance
gpio: regmap: Apply default resource callbacks for regmap IRQ chip
gpio: regmap: Provide default IRQ resource request and release callbacks
Revert "gpio: realtek: Add driver for Realtek DHC RTD1625 SoC"
gpib: gpio: replace linux/gpio.h inclusion
Input: matrix_keyboard - replace linux/gpio.h inclusion
phy: replace linux/gpio.h inclusions
pcmcia: replace linux/gpio.h inclusions
ASoC: replace linux/gpio.h inclusions
mfd: replace linux/gpio.h inclusions
sh: replace linux/gpio.h inclusions
...
Pull VDSO updates from Thomas Gleixner:
- Consolidate the VDSO datastore further and provide support for
mlock_all() and prefaulting.
- Provide 32-bit legacy time related functionality only if
CONFIG_COMPAT_32BIT_TIME is enabled. The config switch exists,
but architecture code still exposes the legacy functionality even
disabled.
Clean this up by adding the missing guards and validating at build
time that the VDSO is legacy free if disabled.
- Consolidate the VDSO related config options in core and drivers,
which removes some non-sensical dependencies and quite an amount of
#ifdeffery.
- Clean up the PAGE_SIZE definition maze
* tag 'timers-vdso-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
random: vDSO: Drop custom PAGE_SIZE definitions
LoongArch: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
clocksource/drivers/timer-riscv: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
clocksource/drivers/arm_arch_timer: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
clocksource/drivers/mips-gic-timer: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
MIPS: csrc-r4k: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
vDSO: Make clockmode constants available without CONFIG_GENERIC_GETTIMEOFDAY
kbuild: Support generated asm-headers in subdirectories
vdso: Rename HAVE_GENERIC_VDSO to VDSO_DATASTORE
vdso: Drop HAVE_GENERIC_VDSO from architecture kconfig files
vdso: Automatically select HAVE_GENERIC_VDSO if necessary
MIPS: vdso: Stop using CONFIG_HAVE_GENERIC_VDSO
vdso: Remove the dependency on HAVE_GENERIC_VDSO from ARCH_HAS_VDSO_ARCH_DATA
futex: Remove dependency on HAVE_GENERIC_VDSO from FUTEX_ROBUST_UNLOCK
vdso/gettimeofday: Verify COMPAT_32BIT_TIME interactions
sparc: vdso: Respect COMPAT_32BIT_TIME
MIPS: VDSO: Respect COMPAT_32BIT_TIME
powerpc/vdso: Respect COMPAT_32BIT_TIME
ARM: VDSO: Respect COMPAT_32BIT_TIME
arm64: vdso32: Respect COMPAT_32BIT_TIME
...
Pull locking updates from Ingo Molnar:
"Futexes:
- Use runtime constants for futex_hash computation (K Prateek Nayak,
Peter Zijlstra)
- Optimise the size check get_futex_key() (Sebastian Andrzej Siewior)
- Avoid private hash use-after-free on final put (Felix Hoffmann)
- Tell kmemleak we're not leaking __futex_queues (Peter Zijlstra)
Rust integration updates:
- Implement refcounted interrupt disable and SpinLockIrq for Rust
(Boqun Feng, Heiko Carstens, Joel Fernandes, Lyude Paul)
- Rust sync: add helpers for mb, dma_mb and friends; add generic
memory barriers and use LKMM atomics instead of Rust atomics in the
revocable code (Gary Guo)
- Add abstraction and integrate synchronize_rcu() (Philipp Stanner)
Lock debugging:
- Add qspinlock contended_release tracepoint (Dmitry Ilvokhin, Peter
Zijlstra)
- Enable the printing of held locks of remote running tasks and print
task CPU (Ingo Molnar)
- percpu-rwsem: Annotate intentional data race in readers_active_check()
(Sun Shaojie)
Misc fixes and updates by Boqun Feng, Peter Zijlstra, Fangrui Song,
Naveen Kumar Chaudhary and Thomas Huth"
* tag 'locking-core-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
rust: sync: Introduce SpinLockIrq::lock_with() and friends
rust: sync: Add SpinLockIrq
rust: sync: Use super::* in spinlock.rs
rust: helper: Add spin_{un,}lock_irq_{enable,disable}() helpers
rust: Introduce interrupt module
s390/preempt: Enable HAS_SEPARATE_PREEMPT_RESCHED_BITS
arm64: sched/preempt: Enable HAS_SEPARATE_PREEMPT_RESCHED_BITS
preempt: Introduce HAS_SEPARATE_PREEMPT_RESCHED_BITS
sched: Avoid signed comparison of preempt_count() in __cant_migrate()
sched: Remove the unused preempt_offset parameter of __cant_sleep()
locking: Switch to _irq_{disable,enable}() variants in cleanup guards
irq: Add KUnit test for refcounted interrupt enable/disable
irq,spin_lock: Add counted interrupt disabling/enabling
openrisc: Include <linux/cpumask.h> in smp.h
preempt: Introduce __preempt_count_{sub,add}_return()
preempt: Introduce HARDIRQ_DISABLE_BITS
preempt: Track NMI nesting to separate per-CPU counter
futex: Tell kmemleak we're not leaking __futex_queues
x86/paravirt: Trace contended_release on unlock
tracing/lock: Use TRACE_EVENT_FN() for contended_release
...
Pull kunit updates from Shuah Khan:
"Fixes and new kunit and tools, enable new configs:
- configs: enable GPIO kunit test cases in all_tests.config
- string-stream: Replace strlcat() with strscpy() and seq_buf
- configs: enable GPIO kunit test cases in all_tests.config
Documentation:
- Test config entries shouldn't select other configs
- Fix outdated FAQ entries
Add the ability to skip entire test suites and an example test suite
that can be skipped at runtime:
- Add ability to skip entire test suites
- Add example of test suite that can be skipped at runtime"
* tag 'linux_kselftest-kunit-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: fix _list_tests filtering wrong variable when list has TAP prefix
kunit: configs: enable GPIO kunit test cases in all_tests.config
kunit: string-stream: Replace strlcat() with strscpy() and seq_buf
Documentation: kunit: Fix outdated FAQ entries
Documentation: kunit: Test Kconfig entries shouldn't select other configs
kunit: Add example of test suite that can be skipped at runtime
kunit,rust: Add ability to skip entire test suites
Pull crypto library test updates from Eric Biggers:
- Add comprehensive KUnit test suites for the new AES-GCM and AES-CCM
library APIs
- Add FIPS self-tests for all the AES encryption modes. This is needed
for parity with the traditional crypto API
- Fix a couple more issues in the IRQ test helper
* tag 'libcrypto-tests-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: aes-cmac: Use __cleanup() instead of memzero_explicit()
kunit: irq: Unregister on-stack timer and work from debugobjects
kunit: irq: Continue increasing hrtimer interval for longer
lib/crypto: tests: Add KUnit test suite for AES-GCM
lib/crypto: tests: Add KUnit test suite for AES-CCM
lib/crypto: tests: Add aead-test-template.h
lib/crypto: tests: Use per-test-case buffers in hash tests
lib/crypto: tests: Create test-utils.h
lib/crypto: aes: Add FIPS self-tests for GCM and CCM
lib/crypto: aes: Add FIPS self-tests for unauthenticated modes
lib/crypto: fips: Split fips.h into fips-aes.h and fips-sha.h
Pull crypto library updates from Eric Biggers:
"Add library APIs for most AES encryption modes that are used in the
kernel (ECB, CBC, CBC-CTS, CTR, XCTR, XTS, GCM, CCM).
These AES modes have many in-kernel users that are currently using the
crypto_skcipher or crypto_aead APIs. These existing APIs are difficult
to use and inefficient. Until now, the lack of proper library support
for these has been the main gap in the crypto library.
This set of changes is the next stage of addressing it:
- Implement the new APIs on top of the existing support for
single-block AES in the library.
- Fully document the new APIs.
- Migrate the only user of the old AES-GCM library API to the new,
more flexible API; then remove the old API and its implementation.
- Wire up the new APIs to the traditional crypto API by adding
crypto_skcipher and crypto_aead algorithms.
This makes the new APIs be covered by the traditional crypto API's
self-tests. It also makes them be already used for real on systems
that don't have architecture-optimized code for these modes.
But most importantly, this is a prerequisite for migrating the
architecture-optimized code for these AES modes (i.e.
arch/*/crypto/aes*) into the library, which as usual will eliminate
a lot of redundant "glue" code.
Note that unlike some of the other algorithms that have been migrated
to the library, e.g. SHA-512, for these AES modes there was too much
to get done in one cycle. Nor did it make sense to handle these modes
one at a time, because they tend to be coupled together or depend on
each other, especially in the architecture-optimized AES code.
Thus, most of the benefits (reductions in lines of code, performance
improvements, etc.) will follow in later cycles when
architecture-optimized code is migrated into the library and users of
crypto_skcipher and crypto_aead are updated to use the new APIs.
The design of the new APIs was informed by writing proof-of-concept
patches for many kernel subsystems currently accessing these same
algorithms via crypto_skcipher or crypto_aead (patches 18-33 of
https://lore.kernel.org/r/20260707053503.209874-1-ebiggers@kernel.org/).
While those patches will be resent for real later, the total diffstat
for them was negative 1905 lines. So clearly the new APIs are quite a
bit easier to use and align better with what users actually need.
Besides the new AES encryption APIs, there are also a few changes for
improved AES-CMAC key and context zeroization"
* tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
mac80211: fils_aead: Use __cleanup() instead of memzero_explicit()
Bluetooth: SMP: clear the aes_cmac_key when done
smb: clear the aes_cmac_key and aes_cmac_ctx when done
lib/crypto: aes-cmac: Add zeroization functions
lib/crypto: aesgcm: Remove old AES-GCM library
x86/sev: Remove obsolete virtual address check
x86/sev: Use new AES-GCM library
crypto: aes - Add CCM support using library
crypto: aes - Add GCM support using library
crypto: aes - Add XTS support using library
crypto: aes - Add CTR and XCTR support using library
crypto: aes - Add CBC and CBC-CTS support using library
crypto: aes - Add ECB support using library
lib/crypto: aes: Add CCM support
lib/crypto: aes: Add GCM support
lib/crypto: aes: Add XTS support
lib/crypto: aes: Add CTR and XCTR support
lib/crypto: aes: Add CBC and CBC-CTS support
lib/crypto: aes: Add ECB support
crypto: xts - Split out __xts_verify_key() helper
Pull misc vfs updates from Christian Brauner:
"Bigger cleanups:
- The lockref dead-count handling is tidied up.
The open-coded check for a count below zero as the dead marker
relies on information the caller should not have.
- make put_mnt_ns() leave mounts connected. Destroying a mount
namespace disconnected its mounts from their mount points. So a
file descriptor still open on the parent of a mount point could be
used to peek under it.
Locked mounts were already kept connected to prevent exactly that.
But a mount is only locked when its tree is copied across a user
namespace boundary. So a mount namespace set up by a privileged
component had no locked mounts and its mounts were disconnected.
Passing UMOUNT_CONNECTED keeps every mount connected and prevents
that bug.
- vfs_prepare_mode() passes S_IFDIR for directories. I meant to fix
that ago but didn't get to it. So now someone finally did it.
This kills the exception where the mode could be 0 when a directory
was created whereas every other creation operation passed it
explicitly already.
- move long delayed work for ufs, jffs2, hfsplus, hfs and affs from
the per-cpu system_long_wq to the new unbound system_dfl_long_wq.
None of that work relies on per-cpu state and the work item is
enqueued with queue_delayed_work() whose timer is global anyway. So
it may as well benefit from scheduler task placement.
Smaller fixes and cleanups:
- unlock_buffer() and journal_end_buffer_io_sync() use
clear_and_wake_up_bit()
- the pipe page pools are unified into a single per-pipe pool and the
extra wake_up(rd_wait) is limited to EPOLLET consumers
- eventpoll now computes its timer slack lazily in ep_poll()
- shrink_dcache_for_umount() keeps making progress on busy roots
- excess xarray nodes are freed in clear_inode()
- romfs detects hard link cycles
- the user path of nested backing files is fixed
- pidfd holds exec_update_lock around the namespace ioctl
- non-memcg-aware nr_cached_objects is skipped during memcg slab
shrink
- iomap_write_iter() always returns status
- mangle_path() is renamed to seq_mangle_path()
- inode timestamp accessors are annotated
- new regression test for pipe->poll_usage.
- a few documentation, kernel-doc and selftest fixes"
* tag 'vfs-7.3-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (67 commits)
selftests/namespaces: Fix racy pipe handshake in timens and pidns_separate
selftests/epoll: add a regression test for pipe->poll_usage
pipe: only enable the extra wake_up(rd_wait) for EPOLLET consumers
pidfd: hold exec_update_lock around namespace ioctl
fs: fix user path of nested backing files
fs: remove stale inode_insert5() kernel-doc parameter
fs: fix switch/case indentation in sysfs() syscall
fs: document semantics of kstat::{uid,gid} fields
dcache: keep shrink_dcache_for_umount() making progress on busy roots
seq_file: rename mangle_path to seq_mangle_path
nstree: add/fix struct ns_id_req kernel-doc member fields
dcache: use lockref routines for dead count checks
lockref: tidy up dead count handling
initramfs: fix typo in reserve_initrd_mem comment
fs/pipe: unify the page pools into a single per-pipe pool
fs: annotate inode timestamp accessors
eventpoll: compute timer slack lazily in ep_poll()
selftests/filesystems: add mntns cleanup test
put_mnt_ns(): leave mounts connected
affs: Move long delayed work on system_dfl_long_wq
...
Add a KUnit test suite for the AES-GCM library API.
It consists of:
- All the shared test cases from aead-test-template.h. These include
extensive consistency tests, a "Monte-Carlo test", and a benchmark.
- Tests against hardcoded AES-GCM test vectors from external sources.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260802233005.161467-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add a KUnit test suite for the AES-CCM library API.
It consists of:
- All the shared test cases from aead-test-template.h. These include
extensive consistency tests, a "Monte-Carlo test", and a benchmark.
- Tests against hardcoded AES-CCM test vectors from external sources.
- Tests for CCM-specific message length validation.
To generate the expected aes_ccm_monte_carlo_checksum[] value, add a
script gen-aead-testvecs.py which computes it using python-cryptography.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260802233005.161467-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add aead-test-template.h which contains shared test logic for AEAD
algorithms. It's similar to the existing hash-test-template.h, which
contains shared test logic for hash algorithms.
The initial use cases for this will be AES-CCM and AES-GCM.
It may be used by the existing ChaCha20Poly1305 test suite in the future
as well, though the ChaCha20Poly1305 API currently lacks some of the
functionality that the "template" expects to be present.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260802233005.161467-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Upcoming changes will wire up architecture-optimized implementations of
GCM and CCM. FIPS labs can consider such designs to meet the threshold
for separate self-tests to be needed.
Therefore, add FIPS self-tests for encryption and decryption in these
modes.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260802222408.91757-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Upcoming changes will wire up architecture-optimized implementations of
ECB, CBC, CBC-CTS, CTR, and XTS. FIPS labs can consider such designs to
meet the threshold for separate self-tests to be needed.
The inverse direction of the block cipher also needs to be exercised,
which the existing CMAC self-test doesn't do.
Therefore, add FIPS self-tests for encryption and decryption in these
modes as well as the "bare" AES.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260802222408.91757-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Currently, CPU backtrace functions cannot be called from loadable
modules because the underlying helper arch_trigger_cpumask_backtrace()
is not exported.
Instead of exporting arch_trigger_cpumask_backtrace() individually
across every supported architecture, introduce and export a common
helper, cpumask_backtrace(), in lib/nmi_backtrace.c. Update the four
inline CPU backtrace macros in include/linux/nmi.h to route through this
centralized helper.
Signed-off-by: Mayank Rungta <mrungta@google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20260730-export-cpu-backtrace-apis-v1-1-bace8e1cb817@google.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Pull crypto fixes from Herbert Xu:
- Fix lockdep warning regression in rhashtable
- Fix default authsize in rfc4309
- Fix gcm cryptlen calculation in tegra
- Fix qce registration error-path bug
- Fix incorrect use of sg_dma_len before mapping in starfive
- Allow cbc(paes) to be used with af_alg
* tag 'v7.2-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: af_alg - Allow cbc(paes)
crypto: starfive - use scatterlist length before DMA mapping
crypto: qce - fix error path in devm_qce_register_algs
rhashtable: fix false-positive lockdep splat on rhltable destruction
crypto: tegra - fix rctx->cryptlen calculation in tegra_gcm_do_one_req()
crypto: ccm - Set rfc4309 maxauthsize from child
With the changes that enable preempt count to track IRQ disabling
nesting, we don't have enough bits in 32-bit preempt count
implementation, as a result we move NMI nesting bits out of the 32-bit
preempt count. However on the architectures that can support 64-bit
preempt count implementation, we can keep the NMI nesting bits in the
32-bit preempt count and avoid maintaining NMI nesting bits outside of
the same cache line.
Therefore HAS_SEPARATE_PREEMPT_RESCHED_BITS is introduced to allow
architectures to select this. Note that under this Kconfig, preempt
count is maintained in a 64-bit word however preempt_count() still
remains as an int because all the effective bits still fit in
(previously we mask out NEED_RESCHED bit in preempt_count()). This
should make no functional changes for existing preempt_count() users.
Enable this for x86_64 along with the introduction of the Kconfig.
[boqun: Undo the __preempt_count_{add,sub}() optimization in 32-bit
preempt count since it may introduce {over,under}flow]
Originally-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260804161447.84806-11-boqun@kernel.org
1. put the dead val into a macro so that it can be used in other places
2. __lockref_is_dead():
- drop the __ suffix, this is not an internal routine
- drop the spurious cast, the value is already a signed int
- use READ_ONCE to prevent any compile shenanigans
3. provide lockref_is_dead_or_zero()
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://patch.msgid.link/20260724171422.429284-2-mjguzik@gmail.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Blamed commit removed ht->mutex usage during destruction but forgot to
switch rhashtable_free_one() to rcu_dereference_raw(), this triggers a
lockdep splat when an rhltable gets zapped.
Fixes: 09ae540e1d ("rhashtable: drop ht->mutex in rhashtable_free_and_destroy()")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull misc fixes from Andrew Morton:
"13 hotfixes. All are cc:stable. 11 are for MM. All are singletons -
please see the changelogs for details"
* tag 'mm-hotfixes-stable-2026-07-27-14-18' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
fs/proc/task_mmu: fix PAGEMAP_SCAN written state for PMD holes
mm/hugetlb: fix list corruption in allocate_file_region_entries()
mm: mglru: fix stale batch updates after memcg reparenting
selftest: fix headers in fclog.c
ocfs2: fix boundary check in ocfs2_check_dir_entry() to use buffer offset
mm/percpu-km: fix bitmap overflow and accounting in pcpu_create_chunk()
mm/util: don't read __page_2 for order-1 folios in snapshot_page()
mm/hugetlb: fix swap entry corruption when clearing uffd-wp at fork()
mm: migrate_device: fix pte_pfn/pte_dirty called on non-present PTE
fs/proc/task_mmu: fix PAGEMAP_SCAN written state for unpopulated ptes
userfaultfd: wait on source PMD during UFFDIO_MOVE
lib: test_hmm: use device devt for coherent device range selection
mm/vmstat: fold stranded per-cpu node stats when a node comes online
Pull keys fixes from Jarkko Sakkinen:
- An unprivileged keyring whose keys collide through the
description-chunk path can drive assoc_array node splitting
into an out-of-bounds slot write. Fix it.
- Fix the DCP trusted keys backend
* tag 'for-next-keys-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
assoc_array: trim the final shortcut word using the current chunk end
keys: make keyring key-chunk byte order agree with keyring_diff_objects()
keys: fix out-of-bounds read in keyring_get_key_chunk()
KEYS: trusted: dcp: fix key_len validation and calc_blob_len() return type
Pull slab fixes from Vlastimil Babka:
- Prevent unbounded recursion in free path with memory allocation
profiling, which has caused a stack overflow on a Meta production
host due to a 125-deep __free_slab<->kfree recursion (Harry Yoo)
- Fix type-based partitioning confusing sparse which does not know
__builtin_infer_alloc_token() (Marco Elver)
- Fix a potential memory leak in bulk freeing path on NUMA machines
(Shengming Hu)
* tag 'slab-for-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: silence sparse warning with type-based partitioning
mm/slab: prevent unbounded recursion in free path with new kmalloc type
lib/alloc_tag: introduce mem_alloc_profiling_permanently_disabled()
mm/slab: decouple SLAB_NO_SHEAVES from SLAB_NO_OBJ_EXT
mm/slab: fix a memory leak due to bootstrapping sheaves twice
mm/slub: fix lost local objects when bulk remote free batch fills
Cross-merge networking fixes after downstream PR (net-7.2-rc5).
Conflicts:
drivers/net/amt.c
3656a79f94 ("amt: re-read skb header pointers after every pull")
586c4dcf28 ("amt: no longer rely on RTNL in amt_fill_info()")
https://lore.kernel.org/amIaJr3aOQNS_Fvl@sirena.org.uk
Adjacent changes:
drivers/net/geneve.c
8efb8f8bbb ("geneve: require CAP_NET_ADMIN in the device netns for changelink")
0ba269933f ("geneve: convert config to RCU-protected pointer")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
assoc_array_walk() masks off the bits past shortcut->skip_to_level in the
word that contains skip_to_level, gated on
round_up(sc_level, ASSOC_ARRAY_KEY_CHUNK_SIZE) > skip_to_level.
That guard is wrong in two opposite ways:
- When sc_level is word-aligned (every word after the first) round_up()
is a no-op, so the guard is sc_level > skip_to_level and never fires for
the word that holds skip_to_level. A shortcut that spans more than one
word and ends in the middle of its last word leaves that word untrimmed,
and its stale high bits leak into the dissimilarity word and can steer
the walk down the wrong descendant.
- When sc_level is unaligned (the first word) and skip_to_level sits on
the next chunk boundary, sc_level + CHUNK would exceed skip_to_level and
fire the trim with shift = skip_to_level & CHUNK_MASK == 0, which clears
the whole dissimilarity word and makes a differing shortcut compare
equal.
Use the end of the chunk that contains sc_level instead:
skip_to_level < round_down(sc_level, CHUNK) + CHUNK
For an aligned sc_level whose word holds skip_to_level this now fires (the
first bug); for an unaligned sc_level with skip_to_level on the following
boundary it does not, so shift is never 0 when the branch runs and the trim
never clears the whole word.
Fixes: 3cb989501c ("Add a generic associative array implementation.")
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20260719161505.2423935-4-michael.bommarito@gmail.com
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Add support for AES-CCM to the crypto library.
This will be used to provide a streamlined implementation of the
"ccm(aes)" crypto_aead algorithm. Most users of "ccm(aes)" will also be
able to switch to the library, which as usual will be faster and
simpler, e.g.:
- fs/smb/client/
- fs/smb/server/
- net/mac80211/
- net/mac802154/
(I've already written proof-of-concept patches for all the above, and
they helped inform the API design.)
As in the AES-GCM API, incremental operation is supported. It has to be
used carefully, especially when decrypting, but it makes the API general
enough to work well for all users.
The AES-CCM library code calls aes_cbcmac_blocks() directly, bypassing
the higher-level aes_cbcmac_init(), aes_cbcmac_update(), and
aes_cbcmac_final(). The latter set of functions is useful only for
AES-CCM, so they don't make sense to keep around and will be removed
once the "ccm(aes)" crypto_aead starts using the AES-CCM library.
Initial test coverage is provided by the crypto_aead support added in a
later commit. I'm planning a KUnit test suite as well.
Link: https://patch.msgid.link/20260715221153.246410-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add support for AES-GCM to the crypto library.
This will be used to provide streamlined implementations of the
"gcm(aes)" and "rfc4106(gcm(aes))" crypto_aead algorithms. Most users
of these will also be able to switch to the library, which as usual will
be faster and simpler, e.g.:
- drivers/net/macsec.c
- fs/smb/client/
- fs/smb/server/
- net/ceph/messenger_v2.c
- net/mac80211/ (for both GMAC and GCMP)
- net/tipc/crypto.c
- security/keys/trusted-keys/trusted_dcp.c
(I've already written proof-of-concept patches for all the above, and
they helped inform the API design.)
As usual, the architecture-optimized AES-GCM code will be migrated into
the library as well (using the hooks provided in this commit as well as
the GHASH ones), eliminating lots of repetitive boilerplate code.
Incremental en/decryption is supported. Incremental operation is a bit
controversial in AEAD APIs because users have to be careful not to
consume any decrypted data that hasn't been authenticated yet. But I do
think it's the right choice here. It's not fundamentally different from
the existing incremental MAC APIs, and it's the only approach that's
general enough to work well for all users in the kernel:
- An array of virtually-addressed buffers (like that used by
BoringSSL's EVP_AEAD_CTX_sealv() and EVP_AEAD_CTX_openv()) doesn't
work in the kernel in general, since in some cases the data for a
single AES-GCM message is contained in a large number of highmem
pages that each need to be mapped into memory individually. That
can be done efficiently only by using CPU-local mappings, but there
is a limited number of those.
Ceph messenger v2 is a great example, as it can send or receive up
to 32 MiB in a single AES-GCM message. And it needs the
en/decrypted data to go into a (potentially large) number of bvecs
provided by a custom iterator, as well as into four
virtually-addressed buffers, two of which can be large buffers in
the vmalloc region.
Even just allocating an array big enough to store all the pointers
can be problematic in the kernel. There are cases in which
decryption runs in GFP_NOIO context or even in softirq context,
where memory allocations are not as reliable as they normally are.
- Meanwhile, 'struct scatterlist' (the choice of crypto_aead) has
turned out to be really inconvenient for anyone who *does* just have
virtually-addressed buffers. This is especially true if they can be
in the vmalloc region, including the stack, as in that case the
conversion to a scatterlist has to be done page-by-page.
And even for users who have all of their data in bare 'struct page',
none of them actually use 'struct scatterlist' as their native data
structure anyway. They actually use skbs, bvecs, or other formats.
- iov_iter is attractive, but ultimately not general enough either
(considering the Ceph case for example), but also too general in
some ways (like having support for userspace addresses). Additional
iter types like ITER_SKB would help a bit, but bloating iov_iter
with more types would reduce performance elsewhere in the kernel.
Initial test coverage is provided by the crypto_aead support added in a
later commit. I'm planning a KUnit test suite as well.
Link: https://patch.msgid.link/20260715221153.246410-7-ebiggers@kernel.org
Link: https://patch.msgid.link/20260722021730.16897-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Alice Mikityanska says:
====================
BIG TCP for UDP tunnels
This series is a follow-up to "BIG TCP without HBH in IPv6", and it adds
support for BIG TCP IPv4/IPv6 workloads in vxlan and geneve. Now that
IPv6 BIG TCP doesn't require stripping the HBH in all various
combinations in tunneled traffic, adding BIG TCP becomes feasible.
Patch 01 adds accessors for the length field in the UDP header, as
suggested by Paolo in review. The usage of udp_set_len is then added in
the following patches that start using length=0 in BIG TCP UDP packets.
Patches 02-04 close the gaps that prevent BIG TCP packets from going
through UDP tunnel code.
Patch 05 validates packets in udp_gro_receive to exclude packets with
length=0 from GRO aggregation.
Patch 06 is for proper formatting in tcpdump (set UDP len to 0 rather
than a trimmed value on overflow).
Patches 07-08 bump up tso_max_size for VXLAN and GENEVE.
Patch 09 adds selftests.
====================$
Link: https://patch.msgid.link/20260710134242.216538-1-alice.kernel@fastmail.im
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since BIG TCP for UDP tunnels will start using len=0 in the UDP header
as an indicator of a GSO packet bigger than 65535 bytes, this commit
introduces the following getter and setters to use tree-wide, in order
to explicitly mark places where len=0 may be expected, and handle them
properly:
1. udp_set_len() sets uh->len to its real value if it's not bigger than
65535, and to 0 otherwise: to be used in GSO context with aggregated
packets.
2. udp_set_len_short() is to be used when the length is known to fit 16
bits. It WARNs when the caller tries to assign a bigger value if
CONFIG_DEBUG_NET=y.
3. udp_get_len_short() returns len in host byte order: to be used on the
RX side to deal with non-aggregated packets, or to access the raw value
of the len field.
4. udp_get_len() decodes uh->len set by udp_set_len(). It checks whether
the packet is GSO to guard from malformed packets.
At the moment udp_set_len() is not used, a following commit will start
using it after enabling len>65535 for GSO.
Raw uh->len (in network byte order) is still accessed in a few places
for checksum calculation purposes, and to decode len=0 in udpv6_rcv for
jumbograms. udp_rcv and udpv6_rcv will be addressed by the commit that
starts using udp_set_len() to set UDP len=0 for BIG TCP packets in UDP
tunnels.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20260710134242.216538-2-alice.kernel@fastmail.im
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit af69016dab ("lib: test_hmm: implement a device release method")
moved the initial dmirror_allocate_chunk() call before cdev_device_add().
That means the struct cdev has not been added yet, so cdev_add() has not
initialized mdevice->cdevice.dev.
The coherent-device range selection uses the device minor to choose
between spm_addr_dev0 and spm_addr_dev1. Reading
MINOR(mdevice->cdevice.dev) before cdev_add() therefore always sees an
uninitialized dev_t. As a result, both coherent devices select the same
physical range, and adding the second device fails due to the overlapping
dev_pagemap range.
Use mdevice->device.devt instead. It is initialized in
dmirror_device_init() before dmirror_allocate_chunk() is called and is the
same dev_t later passed to cdev_device_add().
Link: https://lore.kernel.org/178277581197.172200.16265155329935822153.stgit@skinsburskii
Fixes: af69016dab ("lib: test_hmm: implement a device release method")
Signed-off-by: Stanislav Kinsburskii <skinsburskii@gmail.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: Zenghui Yu (Huawei) <zenghui.yu@linux.dev>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull crypto fix from Herbert Xu:
- Fix potential crash in rhashtable walk
* tag 'v7.2-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
rhashtable: clear stale iter->p on table restart
software node: provide support for fw_devlink
This series extends software node support to use fw_devlink and adds test
coverage for the new behaviour.
This is a stable tag for other trees to merge.
Add support for AES-XTS to the crypto library.
This will be used to provide a streamlined implementation of the
"xts(aes)" crypto_skcipher algorithm. I'm also planning to use this
directly in fscrypt and blk-crypto-fallback.
As usual, the architecture-optimized AES-XTS code will be migrated into
the library as well (using the hooks provided in this commit),
eliminating lots of repetitive boilerplate code. Compared to direct
implementation of "xts(aes)", I've also eliminated the requirement for
architectures to implement ciphertext stealing, as the library just
handles it portably instead. That will simplify things considerably.
Initial test coverage is provided by the crypto_skcipher support added
in a later commit. I'm planning a KUnit test suite as well.
Link: https://patch.msgid.link/20260715221153.246410-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add support for AES-CTR and AES-XCTR to the crypto library.
These will be used to provide streamlined implementations of the
"ctr(aes)" and "xctr(aes)" crypto_skcipher algorithms. Most users of
"ctr(aes)" will also be able to switch to the library, which as usual
will be simpler and faster, e.g.:
- net/mac80211/fils_aead.c
- net/mac802154/llsec.c
As usual, the architecture-optimized AES-CTR and AES-XCTR code will be
migrated into the library as well (using the hooks provided in this
commit), eliminating lots of repetitive boilerplate code.
This is also a prerequisite for supporting AES-GCM, AES-CCM, and
AES-HCTR2 in the crypto library.
Initial test coverage is provided by the crypto_skcipher support added
in a later commit. I'm planning a KUnit test suite as well.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://patch.msgid.link/20260715221153.246410-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add support for AES-CBC and AES-CBC-CTS to the crypto library.
These will be used to provide streamlined implementations of the
"cbc(aes)" and "cts(cbc(aes))" crypto_skcipher algorithms. Most users
of these crypto_skcipher algorithms will also be able to switch to the
library, which as usual will be simpler and faster, e.g.:
- block/blk-crypto-fallback.c (for AES-128-CBC-ESSIV)
- fs/crypto/crypto.c (for AES-128-CBC-ESSIV)
- fs/crypto/fname.c (for AES-256-CTS and AES-128-CBC)
- kernel/bpf/crypto.c
- net/ceph/crypto.c
- security/keys/encrypted-keys/encrypted.c
As usual, the architecture-optimized AES-CBC and AES-CBC-CTS code will
be migrated into the library as well (using the hooks provided in this
commit), eliminating lots of repetitive boilerplate code.
Initial test coverage is provided by the crypto_skcipher support added
in a later commit. I'm planning a KUnit test suite as well.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://patch.msgid.link/20260715221153.246410-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add support for AES-ECB to the crypto library.
This will be used to provide a streamlined implementation of the
"ecb(aes)" crypto_skcipher algorithm. fs/crypto/keysetup_v1.c will also
use aes_ecb_encrypt() directly.
As usual, the architecture-optimized AES-ECB code will be migrated into
the library as well (using the hooks provided in this commit),
eliminating lots of repetitive boilerplate code.
ECB is obsolete of course, but we need this for parity with the
traditional API and to support some odd users of ECB in the kernel.
Initial test coverage is provided by the crypto_skcipher support added
in a later commit. I'm planning a KUnit test suite as well.
Create a documentation file libcrypto-unauth-encryption.rst to hold the
documentation for this and other unauthenticated encryption modes.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://patch.msgid.link/20260715221153.246410-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
