CONFIG_ARM_AT91_ETHER doesn't exist anymore, both drivers have been merged
in the macb driver.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Allwinner defconfig changes for 4.3
Two patches that enable various Allwinner related drivers drivers both in
sunxi_defconfig and in multi_v7_defconfig
* tag 'sunxi-defconfig-for-4.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: multi_v7_defconfig: Enable Allwinner P2WI, PWM, DMA_SUN6I, cryptodev
ARM: sunxi_defconfig: Enable DMA_SUN6I, P2WI, PWM, cryptodev, EXTCON, FHANDLE
Signed-off-by: Olof Johansson <olof@lixom.net>
mvebu config changes for v4.3 (part #2)
Improve dt support for orion5x
* tag 'mvebu-config-4.3-2' of git://git.infradead.org/linux-mvebu:
ARM: defconfig: orion5x: add DT support
Signed-off-by: Olof Johansson <olof@lixom.net>
Qualcomm ARM Based defconfig Updates for v4.3
* Enable KS8851 for QCOM SoCs in qcom defconfig
* tag 'qcom-defconfig-for-4.3' of git://codeaurora.org/quic/kernel/agross-msm:
ARM: qcom_defconfig: Enable options for KS8851 ethernet
Signed-off-by: Olof Johansson <olof@lixom.net>
Add Atmel-isi and ov2640 driver in defconfig
Signed-off-by: Josh Wu <josh.wu@atmel.com>
[nicolas.ferre@atmel.com: make SOC_CAMERA_OV2640 selected as a module]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Second Round of Renesas ARM Based SoC Defconfig Updates for v4.3
* Enable fixed voltage regulator in shmobile_defconfig
* tag 'renesas-defconfig2-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Enable fixed voltage regulator in shmobile_defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable drivers for Allwinner P2WI, PWM, cryptodev (Security System) and
sun6i DMA engine. Also enable EXTCON as PHY_SUN4I_USB depends on it.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Enable sun6i DMA engine, sun6i P2WI, PWM, and crypto engine (Security
System) drivers by default. EXTCON is needed by the updated sun4i USB
PHY driver.
While at it, enable FHANDLE, which is needed by systemd and newer
versions of udev. Also enable CGROUPS for systemd.
And get rid of POWER_RESET, as the sun6i power reset driver has been
removed in favor of proper sun6i watchdog support.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This is selected by MACH_MARZEN which is enabled in shmobile_defconfig,
however, MACH_MARZEN is going away along with the board code it enables.
Acked-by: Magnus Damm <damm@opensource.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Merge "CSR prima2_defconfig fixes for 4.2" from Barry Song:
enable SiRFSoC device drivers in CSR prima2_defconfig
make savedefconfig at first, then enable
1. sdhci driver
2. onkey
3. rtc
4. hwspinlock
for prima2_defconfig
* tag 'prima2-defconfig-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux:
ARM: prima2_defconfig: enable build for hwspinlock
ARM: prima2_defconfig: enable build for RTC
ARM: prima2_defconfig: enable build for misc input
ARM: prima2_defconfig: enable build for SiRFSoC SDHC host
ARM: prima2_defconfig: fix the outdated defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
this patch is againest v4.2-rc1, by doing:
$ make ARCH=arm prima2_defconfig
$ make ARCH=arm savedefconfig
$ cp defconfig arch/arm/configs/prima2_defconfig
Signed-off-by: Barry Song <Baohua.Song@csr.com>
STi defconfig for v4.3, round 1
Highlights:
-----------
- Enable support ST's PWM driver in multi_v7
- Enable support PWM regulator in multi_v7
* tag 'sti-defconfig-for-v4.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti:
ARM: multi_v7_defconfig: Enable support for PWM Regulators
ARM: multi_v7_defconfig: Enable ST's PWM driver
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable the RPM and RPM regulator drivers as well as the KS8851
ethernet driver so that ethernet works on MSM8960 CDP.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Merge "defconfig changes for v4.3" from Tony Lindgren:
Few defconfig changes for omap2plus_defconfig to enable
SPI NOR, CPTS, touchscreen and ADC used on am335x, am437x
and ra7 devices.
* tag 'omap-for-v4.3/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: enable support for M25P80 SPI NOR
ARM: omap2plus_defconfig: enable support for TI CPTS
ARM: omap2plus_defconfig: enable support for TI touchscreen
ARM: omap2plus_defconfig: enable support for TI ADC
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "EP93xx defconfig changes" from Linus Walleij:
This updates the EP93xx defconfig to use NO_HZ and high
resolution timers, and to by default enable and compile
all board variants now that we can have a single kernel,
and enable all EP93xx-specific drivers that sit in various
sites across the kernel.
* tag 'ep93xx-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: ep93xx: add framebuffer to the defconfig
ARM: ep93xx: add DMA engine to the defconfig
ARM: ep93xx: add GPIO I2C to defconfig
ARM: ep93xx: add LEDs and triggers to defconfig
ARM: ep93xx: enable SIM.ONE MMC/SD hardware
ARM: ep93xx: enable all boards in the EP93xx defconfig
ARM: ep93xx: activate NO_HZ and high-res timers
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge "ARM: mvebu: config changes for v4.3" from Gregory Clement:
mvebu config changes for v4.3 (part #1)
update mvebu_v7_defconfig with features needed for Armada 388 GP
* tag 'mvebu-config-4.3-1' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: update mvebu_v7_defconfig with features needed for Armada 388 GP
Signed-off-by: Olof Johansson <olof@lixom.net>
The EP93xx SoC has a framebuffer driver, let's add this to the
defconfig so we can have graphics working out of the box.
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Several boards can make use of the DMA engine on the EP93xx
so let's enable this by default in the defconfig.
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some of the EP93xx boards have I2C devices on bit-banged GPIO
I2C, so add this to the defconfig.
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The EP93xx has two designated LEDs (not always connected): a
green and a red one. These are registered in the core, so let's
enable the driver and some triggers.
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The SIM.ONE has a MMC card connected to the SPI host. This card
usually hosts an EXT4 root file system. Enable these options in
the defconfig so the default ompiled kernel will work
out-of-the-box.
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
With PATCH_PHYS_TO_VIRT we can support all EP93xx variants
in a single image, so enable all board variants in the defconfig
for simplicity and build coverage.
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Now when the Marzen legacy board code is removed also
get rid of the marzen_defconfig file. Existing users
shall move over to shmobile_defconfig.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
M25P80 driver provides support for most common SPI NOR devices.
These devices are commonly found on TI EVMs for AM437x and DRA7x
SoCs.
Enable support for this driver in defconfig for omap2plus devices.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
CPTS module of CPSW IP enables timestamp synchronization
using PTP. Enable CPTS feature of CPSW driver.
Available on AM335x, AM437x and DRA7x SoCs.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable support for on-chip resistive touchscreen m found on AM335x and
AM437x devices.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable support for on-chip ADC found on AM335x and
AM437x devices.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch enables Renesas DPCM related sound card.
It is used for...
- Sampline rate convert
- CTU/MIXer
Note: you need to enable these settings on DTS file
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch enables DPCM related sound card.
It is used for...
- Sampline rate convert
- CTU/MIXer
Note: you need to enable these settings on DTS file
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The UniPhier on-chip UART driver was merged into the mainline by
commit 1a8d2903cb ("serial: 8250_uniphier: add UniPhier serial
driver").
Enable it from multi_v7_defconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
This reverts commit dec4f799d0.
Jörg Otte reports a NULL pointder dereference due to this commit, as
'crtc_state' very much can be NULL:
crtc_state = state->base.state ?
intel_atomic_get_crtc_state(state->base.state, intel_crtc) : NULL;
So the change to test 'crtc_state->base.active' cannot possibly be
correct as-is.
There may be some other minimal fix (like just checking crtc_state for
NULL), but I'm just reverting it now for the rc2 release, and people
like Daniel Vetter who actually know this code will figure out what the
right solution is in the longer term.
Reported-and-bisected-by: Jörg Otte <jrg.otte@gmail.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
CC: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull VFS fixes from Al Viro:
"Fixes for this cycle regression in overlayfs and a couple of
long-standing (== all the way back to 2.6.12, at least) bugs"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
freeing unlinked file indefinitely delayed
fix a braino in ovl_d_select_inode()
9p: don't leave a half-initialized inode sitting around
Pull MIPS fixes from Ralf Baechle:
"A fair number of 4.2 fixes also because Markos opened the flood gates.
- Patch up the math used calculate the location for the page bitmap.
- The FDC (Not what you think, FDC stands for Fast Debug Channel) IRQ
around was causing issues on non-Malta platforms, so move the code
to a Malta specific location.
- A spelling fix replicated through several files.
- Fix to the emulation of an R2 instruction for R6 cores.
- Fix the JR emulation for R6.
- Further patching of mindless 64 bit issues.
- Ensure the kernel won't crash on CPUs with L2 caches with >= 8
ways.
- Use compat_sys_getsockopt for O32 ABI on 64 bit kernels.
- Fix cache flushing for multithreaded cores.
- A build fix"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: O32: Use compat_sys_getsockopt.
MIPS: c-r4k: Extend way_string array
MIPS: Pistachio: Support CDMM & Fast Debug Channel
MIPS: Malta: Make GIC FDC IRQ workaround Malta specific
MIPS: c-r4k: Fix cache flushing for MT cores
Revert "MIPS: Kconfig: Disable SMP/CPS for 64-bit"
MIPS: cps-vec: Use macros for various arithmetics and memory operations
MIPS: kernel: cps-vec: Replace KSEG0 with CKSEG0
MIPS: kernel: cps-vec: Use ta0-ta3 pseudo-registers for 64-bit
MIPS: kernel: cps-vec: Replace mips32r2 ISA level with mips64r2
MIPS: kernel: cps-vec: Replace 'la' macro with PTR_LA
MIPS: kernel: smp-cps: Fix 64-bit compatibility errors due to pointer casting
MIPS: Fix erroneous JR emulation for MIPS R6
MIPS: Fix branch emulation for BLTC and BGEC instructions
MIPS: kernel: traps: Fix broken indentation
MIPS: bootmem: Don't use memory holes for page bitmap
MIPS: O32: Do not handle require 32 bytes from the stack to be readable.
MIPS, CPUFREQ: Fix spelling of Institute.
MIPS: Lemote 2F: Fix build caused by recent mass rename.
Pull x86 fixes from Thomas Gleixner:
- the high latency PIT detection fix, which slipped through the cracks
for rc1
- a regression fix for the early printk mechanism
- the x86 part to plug irq/vector related hotplug races
- move the allocation of the espfix pages on cpu hotplug to non atomic
context. The current code triggers a might_sleep() warning.
- a series of KASAN fixes addressing boot crashes and usability
- a trivial typo fix for Kconfig help text
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kconfig: Fix typo in the CONFIG_CMDLINE_BOOL help text
x86/irq: Retrieve irq data after locking irq_desc
x86/irq: Use proper locking in check_irq_vectors_for_cpu_disable()
x86/irq: Plug irq vector hotplug race
x86/earlyprintk: Allow early_printk() to use console style parameters like '115200n8'
x86/espfix: Init espfix on the boot CPU side
x86/espfix: Add 'cpu' parameter to init_espfix_ap()
x86/kasan: Move KASAN_SHADOW_OFFSET to the arch Kconfig
x86/kasan: Add message about KASAN being initialized
x86/kasan: Fix boot crash on AMD processors
x86/kasan: Flush TLBs after switching CR3
x86/kasan: Fix KASAN shadow region page tables
x86/init: Clear 'init_level4_pgt' earlier
x86/tsc: Let high latency PIT fail fast in quick_pit_calibrate()
Pull timer fixes from Thomas Gleixner:
"This update from the timer departement contains:
- A series of patches which address a shortcoming in the tick
broadcast code.
If the broadcast device is not available or an hrtimer emulated
broadcast device, some of the original assumptions lead to boot
failures. I rather plugged all of the corner cases instead of only
addressing the issue reported, so the change got a little larger.
Has been extensivly tested on x86 and arm.
- Get rid of the last holdouts using do_posix_clock_monotonic_gettime()
- A regression fix for the imx clocksource driver
- An update to the new state callbacks mechanism for clockevents.
This is required to simplify the conversion, which will take place
in 4.3"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/broadcast: Prevent NULL pointer dereference
time: Get rid of do_posix_clock_monotonic_gettime
cris: Replace do_posix_clock_monotonic_gettime()
tick/broadcast: Unbreak CONFIG_GENERIC_CLOCKEVENTS=n build
tick/broadcast: Handle spurious interrupts gracefully
tick/broadcast: Check for hrtimer broadcast active early
tick/broadcast: Return busy when IPI is pending
tick/broadcast: Return busy if periodic mode and hrtimer broadcast
tick/broadcast: Move the check for periodic mode inside state handling
tick/broadcast: Prevent deep idle if no broadcast device available
tick/broadcast: Make idle check independent from mode and config
tick/broadcast: Sanity check the shutdown of the local clock_event
tick/broadcast: Prevent hrtimer recursion
clockevents: Allow set-state callbacks to be optional
clocksource/imx: Define clocksource for mx27
Pull irq fix from Thomas Gleixner:
"A single fix for a cpu hotplug race vs. interrupt descriptors:
Prevent irq setup/teardown across the cpu starting/dying parts of cpu
hotplug so that the starting/dying cpu has a stable view of the
descriptor space. This has been an issue for all architectures in the
cpu dying phase, where interrupts are migrated away from the dying
cpu. In the starting phase its mostly a x86 issue vs the vector space
update"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hotplug: Prevent alloc/free of irq descriptors during cpu up/down
Normally opening a file, unlinking it and then closing will have
the inode freed upon close() (provided that it's not otherwise busy and
has no remaining links, of course). However, there's one case where that
does *not* happen. Namely, if you open it by fhandle with cold dcache,
then unlink() and close().
In normal case you get d_delete() in unlink(2) notice that dentry
is busy and unhash it; on the final dput() it will be forcibly evicted from
dcache, triggering iput() and inode removal. In this case, though, we end
up with *two* dentries - disconnected (created by open-by-fhandle) and
regular one (used by unlink()). The latter will have its reference to inode
dropped just fine, but the former will not - it's considered hashed (it
is on the ->s_anon list), so it will stay around until the memory pressure
will finally do it in. As the result, we have the final iput() delayed
indefinitely. It's trivial to reproduce -
void flush_dcache(void)
{
system("mount -o remount,rw /");
}
static char buf[20 * 1024 * 1024];
main()
{
int fd;
union {
struct file_handle f;
char buf[MAX_HANDLE_SZ];
} x;
int m;
x.f.handle_bytes = sizeof(x);
chdir("/root");
mkdir("foo", 0700);
fd = open("foo/bar", O_CREAT | O_RDWR, 0600);
close(fd);
name_to_handle_at(AT_FDCWD, "foo/bar", &x.f, &m, 0);
flush_dcache();
fd = open_by_handle_at(AT_FDCWD, &x.f, O_RDWR);
unlink("foo/bar");
write(fd, buf, sizeof(buf));
system("df ."); /* 20Mb eaten */
close(fd);
system("df ."); /* should've freed those 20Mb */
flush_dcache();
system("df ."); /* should be the same as #2 */
}
will spit out something like
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 322023 303843 1131 100% /
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 322023 303843 1131 100% /
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 322023 283282 21692 93% /
- inode gets freed only when dentry is finally evicted (here we trigger
than by remount; normally it would've happened in response to memory
pressure hell knows when).
Cc: stable@vger.kernel.org # v2.6.38+; earlier ones need s/kill_it/unhash_it/
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
