Don't report an error code to L1 when synthesizing a nested VM-Exit and
L2 is in Real Mode. Per Intel's SDM, regarding the error code valid bit:
This bit is always 0 if the VM exit occurred while the logical processor
was in real-address mode (CR0.PE=0).
The bug was introduced by a recent fix for AMD's Paged Real Mode, which
moved the error code suppression from the common "queue exception" path
to the "inject exception" path, but missed VMX's "synthesize VM-Exit"
path.
Fixes: b97f074583 ("KVM: x86: determine if an exception has an error code only when injecting it.")
Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230322143300.2209476-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When injecting an exception into a vCPU in Real Mode, suppress the error
code by clearing the flag that tracks whether the error code is valid, not
by clearing the error code itself. The "typo" was introduced by recent
fix for SVM's funky Paged Real Mode.
Opportunistically hoist the logic above the tracepoint so that the trace
is coherent with respect to what is actually injected (this was also the
behavior prior to the buggy commit).
Fixes: b97f074583 ("KVM: x86: determine if an exception has an error code only when injecting it.")
Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230322143300.2209476-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clear vcpu->mmio_needed when injecting an exception from the emulator to
squash a (legitimate) warning about vcpu->mmio_needed being true at the
start of KVM_RUN without a callback being registered to complete the
userspace MMIO exit. Suppressing the MMIO write exit is inarguably wrong
from an architectural perspective, but it is the least awful hack-a-fix
due to shortcomings in KVM's uAPI, not to mention that KVM already
suppresses MMIO writes in this scenario.
Outside of REP string instructions, KVM doesn't provide a way to resume
an instruction at the exact point where it was "interrupted" if said
instruction partially completed before encountering an MMIO access. For
MMIO reads, KVM immediately exits to userspace upon detecting MMIO as
userspace provides the to-be-read value in a buffer, and so KVM can safely
(more or less) restart the instruction from the beginning. When the
emulator re-encounters the MMIO read, KVM will service the MMIO by getting
the value from the buffer instead of exiting to userspace, i.e. KVM won't
put the vCPU into an infinite loop.
On an emulated MMIO write, KVM finishes the instruction before exiting to
userspace, as exiting immediately would ultimately hang the vCPU due to
the aforementioned shortcoming of KVM not being able to resume emulation
in the middle of an instruction.
For the vast majority of _emulated_ instructions, deferring the userspace
exit doesn't cause problems as very few x86 instructions (again ignoring
string operations) generate multiple writes. But for instructions that
generate multiple writes, e.g. PUSHA (multiple pushes onto the stack),
deferring the exit effectively results in only the final write triggering
an exit to userspace. KVM does support multiple MMIO "fragments", but
only for page splits; if an instruction performs multiple distinct MMIO
writes, the number of fragments gets reset when the next MMIO write comes
along and any previous MMIO writes are dropped.
Circling back to the warning, if a deferred MMIO write coincides with an
exception, e.g. in this case a #SS due to PUSHA underflowing the stack
after queueing a write to an MMIO page on a previous push, KVM injects
the exceptions and leaves the deferred MMIO pending without registering a
callback, thus triggering the splat.
Sweep the problem under the proverbial rug as dropping MMIO writes is not
unique to the exception scenario (see above), i.e. instructions like PUSHA
are fundamentally broken with respect to MMIO, and have been since KVM's
inception.
Reported-by: zhangjianguo <zhangjianguo18@huawei.com>
Reported-by: syzbot+760a73552f47a8cd0fd9@syzkaller.appspotmail.com
Reported-by: syzbot+8accb43ddc6bd1f5713a@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230322141220.2206241-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM irqfd based emulation of level-triggered interrupts doesn't work
quite correctly in some cases, particularly in the case of interrupts
that are handled in a Linux guest as oneshot interrupts (IRQF_ONESHOT).
Such an interrupt is acked to the device in its threaded irq handler,
i.e. later than it is acked to the interrupt controller (EOI at the end
of hardirq), not earlier.
Linux keeps such interrupt masked until its threaded handler finishes,
to prevent the EOI from re-asserting an unacknowledged interrupt.
However, with KVM + vfio (or whatever is listening on the resamplefd)
we always notify resamplefd at the EOI, so vfio prematurely unmasks the
host physical IRQ, thus a new physical interrupt is fired in the host.
This extra interrupt in the host is not a problem per se. The problem is
that it is unconditionally queued for injection into the guest, so the
guest sees an extra bogus interrupt. [*]
There are observed at least 2 user-visible issues caused by those
extra erroneous interrupts for a oneshot irq in the guest:
1. System suspend aborted due to a pending wakeup interrupt from
ChromeOS EC (drivers/platform/chrome/cros_ec.c).
2. Annoying "invalid report id data" errors from ELAN0000 touchpad
(drivers/input/mouse/elan_i2c_core.c), flooding the guest dmesg
every time the touchpad is touched.
The core issue here is that by the time when the guest unmasks the IRQ,
the physical IRQ line is no longer asserted (since the guest has
acked the interrupt to the device in the meantime), yet we
unconditionally inject the interrupt queued into the guest by the
previous resampling. So to fix the issue, we need a way to detect that
the IRQ is no longer pending, and cancel the queued interrupt in this
case.
With IOAPIC we are not able to probe the physical IRQ line state
directly (at least not if the underlying physical interrupt controller
is an IOAPIC too), so in this patch we use irqfd resampler for that.
Namely, instead of injecting the queued interrupt, we just notify the
resampler that this interrupt is done. If the IRQ line is actually
already deasserted, we are done. If it is still asserted, a new
interrupt will be shortly triggered through irqfd and injected into the
guest.
In the case if there is no irqfd resampler registered for this IRQ, we
cannot fix the issue, so we keep the existing behavior: immediately
unconditionally inject the queued interrupt.
This patch fixes the issue for x86 IOAPIC only. In the long run, we can
fix it for other irqchips and other architectures too, possibly taking
advantage of reading the physical state of the IRQ line, which is
possible with some other irqchips (e.g. with arm64 GIC, maybe even with
the legacy x86 PIC).
[*] In this description we assume that the interrupt is a physical host
interrupt forwarded to the guest e.g. by vfio. Potentially the same
issue may occur also with a purely virtual interrupt from an
emulated device, e.g. if the guest handles this interrupt, again, as
a oneshot interrupt.
Signed-off-by: Dmytro Maluka <dmy@semihalf.com>
Link: https://lore.kernel.org/kvm/31420943-8c5f-125c-a5ee-d2fde2700083@semihalf.com/
Link: https://lore.kernel.org/lkml/87o7wrug0w.wl-maz@kernel.org/
Message-Id: <20230322204344.50138-3-dmy@semihalf.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is useful to be able to do read-only traversal of the list of all the
registered irqfd resamplers without locking the resampler_lock mutex.
In particular, we are going to traverse it to search for a resampler
registered for the given irq of an irqchip, and that will be done with
an irqchip spinlock (ioapic->lock) held, so it is undesirable to lock a
mutex in this context. So turn this list into an RCU list.
For protecting the read side, reuse kvm->irq_srcu which is already used
for protecting a number of irq related things (kvm->irq_routing,
irqfd->resampler->list, kvm->irq_ack_notifier_list,
kvm->arch.mask_notifier_list).
Signed-off-by: Dmytro Maluka <dmy@semihalf.com>
Message-Id: <20230322204344.50138-2-dmy@semihalf.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Hyper-V "EnlightenedNptTlb" enlightenment is always enabled when KVM
is running on top of Hyper-V and Hyper-V exposes support for it (which
is always). On AMD CPUs this enlightenment results in ASID invalidations
not flushing TLB entries derived from the NPT. To force the underlying
(L0) hypervisor to rebuild its shadow page tables, an explicit hypercall
is needed.
The original KVM implementation of Hyper-V's "EnlightenedNptTlb" on SVM
only added remote TLB flush hooks. This worked out fine for a while, as
sufficient remote TLB flushes where being issued in KVM to mask the
problem. Since v5.17, changes in the TDP code reduced the number of
flushes and the out-of-sync TLB prevents guests from booting
successfully.
Split svm_flush_tlb_current() into separate callbacks for the 3 cases
(guest/all/current), and issue the required Hyper-V hypercall when a
Hyper-V TLB flush is needed. The most important case where the TLB flush
was missing is when loading a new PGD, which is followed by what is now
svm_flush_tlb_current().
Cc: stable@vger.kernel.org # v5.17+
Fixes: 1e0c7d4075 ("KVM: SVM: hyper-v: Remote TLB flush for SVM")
Link: https://lore.kernel.org/lkml/43980946-7bbf-dcef-7e40-af904c456250@linux.microsoft.com/
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20230324145233.4585-1-jpiotrowski@linux.microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM/arm64 fixes for 6.3, part #2
Fixes for a rather interesting set of bugs relating to the MMU:
- Read the MMU notifier seq before dropping the mmap lock to guard
against reading a potentially stale VMA
- Disable interrupts when walking user page tables to protect against
the page table being freed
- Read the MTE permissions for the VMA within the mmap lock critical
section, avoiding the use of a potentally stale VMA pointer
Additionally, some fixes targeting the vPMU:
- Return the sum of the current perf event value and PMC snapshot for
reads from userspace
- Don't save the value of guest writes to PMCR_EL0.{C,P}, which could
otherwise lead to userspace erroneously resetting the vPMU during VM
save/restore
In case when VCPU is blocked due to WFI, we schedule the timer
from `kvm_riscv_vcpu_timer_blocking()` to keep timer interrupt
ticking.
But in case when delta_ns comes to be zero, we never schedule
the timer and VCPU keeps sleeping indefinitely until any activity
is done with VM console.
This is easily reproduce-able using kvmtool.
./lkvm-static run -c1 --console virtio -p "earlycon root=/dev/vda" \
-k ./Image -d rootfs.ext4
Also, just add a print in kvm_riscv_vcpu_vstimer_expired() to
check the interrupt delivery and run `top` or similar auto-upating
cmd from guest. Within sometime one can notice that print from
timer expiry routine stops and the `top` cmd output will stop
updating.
This change fixes this by making sure we schedule the timer even
with delta_ns being zero to bring the VCPU out of sleep immediately.
Fixes: 8f5cb44b1b ("RISC-V: KVM: Support sstc extension")
Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
On page fault, we find about the VMA that backs the page fault
early on, and quickly release the mmap_read_lock. However, using
the VMA pointer after the critical section is pretty dangerous,
as a teardown may happen in the meantime and the VMA be long gone.
Move the sampling of the MTE permission early, and NULL-ify the
VMA pointer after that, just to be on the safe side.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230316174546.3777507-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
We walk the userspace PTs to discover what mapping size was
used there. However, this can race against the userspace tables
being freed, and we end-up in the weeds.
Thankfully, the mm code is being generous and will IPI us when
doing so. So let's implement our part of the bargain and disable
interrupts around the walk. This ensures that nothing terrible
happens during that time.
We still need to handle the removal of the page tables before
the walk. For that, allow get_user_mapping_size() to return an
error, and make sure this error can be propagated all the way
to the the exit handler.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230316174546.3777507-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Read mmu_invalidate_seq before dropping the mmap_lock so that KVM can
detect if the results of vma_lookup() (e.g. vma_shift) become stale
before it acquires kvm->mmu_lock. This fixes a theoretical bug where a
VMA could be changed by userspace after vma_lookup() and before KVM
reads the mmu_invalidate_seq, causing KVM to install page table entries
based on a (possibly) no-longer-valid vma_shift.
Re-order the MMU cache top-up to earlier in user_mem_abort() so that it
is not done after KVM has read mmu_invalidate_seq (i.e. so as to avoid
inducing spurious fault retries).
This bug has existed since KVM/ARM's inception. It's unlikely that any
sane userspace currently modifies VMAs in such a way as to trigger this
race. And even with directed testing I was unable to reproduce it. But a
sufficiently motivated host userspace might be able to exploit this
race.
Fixes: 94f8e6418d ("KVM: ARM: Handle guest faults in KVM")
Cc: stable@vger.kernel.org
Reported-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230313235454.2964067-1-dmatlack@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The xen_shinfo_test started off with very few iterations, and the numbers
we used in GUEST_SYNC() were precisely mapped to the RUNSTATE_xxx values
anyway to start with.
It has since grown quite a few more tests, and it's kind of awful to be
handling them all as bare numbers. Especially when I want to add a new
test in the middle. Define an enum for the test stages, and use it both
in the guest code and the host switch statement.
No functional change, if I can count to 24.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230204024151.1373296-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add wrappers to do hypercalls using VMCALL/VMMCALL and Xen's register ABI
(as opposed to full Xen-style hypercalls through a hypervisor provided
page). Using the common helpers dedups a pile of code, and uses the
native hypercall instruction when running on AMD.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230204024151.1373296-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extract the guts of kvm_hypercall() to a macro so that Xen hypercalls,
which have a different register ABI, can reuse the VMCALL vs. VMMCALL
logic.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230204024151.1373296-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WARN if generating a GATag given a VM ID and vCPU ID doesn't yield the
same IDs when pulling the IDs back out of the tag. Don't bother adding
error handling to callers, this is very much a paranoid sanity check as
KVM fully controls the VM ID and is supposed to reject too-big vCPU IDs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20230207002156.521736-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Define AVIC_VCPU_ID_MASK based on AVIC_PHYSICAL_MAX_INDEX, i.e. the mask
that effectively controls the largest guest physical APIC ID supported by
x2AVIC, instead of hardcoding the number of bits to 8 (and the number of
VM bits to 24).
The AVIC GATag is programmed into the AMD IOMMU IRTE to provide a
reference back to KVM in case the IOMMU cannot inject an interrupt into a
non-running vCPU. In such a case, the IOMMU notifies software by creating
a GALog entry with the corresponded GATag, and KVM then uses the GATag to
find the correct VM+vCPU to kick. Dropping bit 8 from the GATag results
in kicking the wrong vCPU when targeting vCPUs with x2APIC ID > 255.
Fixes: 4d1d7942e3 ("KVM: SVM: Introduce logic to (de)activate x2AVIC mode")
Cc: stable@vger.kernel.org
Reported-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20230207002156.521736-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Define the "physical table max index mask" as bits 8:0, not 9:0. x2AVIC
currently supports a max of 512 entries, i.e. the max index is 511, and
the inputs to GENMASK_ULL() are inclusive. The bug is benign as bit 9 is
reserved and never set by KVM, i.e. KVM is just clearing bits that are
guaranteed to be zero.
Note, as of this writing, APM "Rev. 3.39-October 2022" incorrectly states
that bits 11:8 are reserved in Table B-1. VMCB Layout, Control Area. I.e.
that table wasn't updated when x2AVIC support was added.
Opportunistically fix the comment for the max AVIC ID to align with the
code, and clean up comment formatting too.
Fixes: 4d1d7942e3 ("KVM: SVM: Introduce logic to (de)activate x2AVIC mode")
Cc: stable@vger.kernel.org
Cc: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20230207002156.521736-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now, if KVM memory stress tests are run with hugetlb sources but hugetlb is
not available (either in the kernel or because /proc/sys/vm/nr_hugepages is 0)
the test will fail with a memory allocation error.
This makes it impossible to add tests that default to hugetlb-backed memory,
because on a machine with a default configuration they will fail. Therefore,
check HugePages_Total as well and, if zero, direct the user to enable hugepages
in procfs. Furthermore, return KSFT_SKIP whenever hugetlb is not available.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
nested_vmx_check_controls() has already run by the time KVM checks host state,
so the "host address space size" exit control can only be set on x86-64 hosts.
Simplify the condition at the cost of adding some dead code to 32-bit kernels.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The effective values of the guest CR0 and CR4 registers may differ from
those included in the VMCS12. In particular, disabling EPT forces
CR4.PAE=1 and disabling unrestricted guest mode forces CR0.PG=CR0.PE=1.
Therefore, checks on these bits cannot be delegated to the processor
and must be performed by KVM.
Reported-by: Reima ISHII <ishiir@g.ecc.u-tokyo.ac.jp>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM/arm64 fixes for 6.3, part #1
A single patch to address a rather annoying bug w.r.t. guest timer
offsetting. Effectively the synchronization of timer offsets between
vCPUs was broken, leading to inconsistent timer reads within the VM.
Presently, when a guest writes 1 to PMCR_EL0.{C,P}, which is WO/RAZ,
KVM saves the register value, including these bits.
When userspace reads the register using KVM_GET_ONE_REG, KVM returns
the saved register value as it is (the saved value might have these
bits set). This could result in userspace setting these bits on the
destination during migration. Consequently, KVM may end up resetting
the vPMU counter registers (PMCCNTR_EL0 and/or PMEVCNTR<n>_EL0) to
zero on the first KVM_RUN after migration.
Fix this by not saving those bits when a guest writes 1 to those bits.
Fixes: ab9468340d ("arm64: KVM: Add access handler for PMCR register")
Cc: stable@vger.kernel.org
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Link: https://lore.kernel.org/r/20230313033234.1475987-1-reijiw@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Have KVM_GET_ONE_REG for vPMU counter (vPMC) registers (PMCCNTR_EL0
and PMEVCNTR<n>_EL0) return the sum of the register value in the sysreg
file and the current perf event counter value.
Values of vPMC registers are saved in sysreg files on certain occasions.
These saved values don't represent the current values of the vPMC
registers if the perf events for the vPMCs count events after the save.
The current values of those registers are the sum of the sysreg file
value and the current perf event counter value. But, when userspace
reads those registers (using KVM_GET_ONE_REG), KVM returns the sysreg
file value to userspace (not the sum value).
Fix this to return the sum value for KVM_GET_ONE_REG.
Fixes: 051ff581ce ("arm64: KVM: Add access handler for event counter register")
Cc: stable@vger.kernel.org
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Link: https://lore.kernel.org/r/20230313033208.1475499-1-reijiw@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Pull tpm fixes from Jarkko Sakkinen:
"Two additional bug fixes for v6.3"
* tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: disable hwrng for fTPM on some AMD designs
tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
AMD has issued an advisory indicating that having fTPM enabled in
BIOS can cause "stuttering" in the OS. This issue has been fixed
in newer versions of the fTPM firmware, but it's up to system
designers to decide whether to distribute it.
This issue has existed for a while, but is more prevalent starting
with kernel 6.1 because commit b006c439d5 ("hwrng: core - start
hwrng kthread also for untrusted sources") started to use the fTPM
for hwrng by default. However, all uses of /dev/hwrng result in
unacceptable stuttering.
So, simply disable registration of the defective hwrng when detecting
these faulty fTPM versions. As this is caused by faulty firmware, it
is plausible that such a problem could also be reproduced by other TPM
interactions, but this hasn't been shown by any user's testing or reports.
It is hypothesized to be triggered more frequently by the use of the RNG
because userspace software will fetch random numbers regularly.
Intentionally continue to register other TPM functionality so that users
that rely upon PCR measurements or any storage of data will still have
access to it. If it's found later that another TPM functionality is
exacerbating this problem a module parameter it can be turned off entirely
and a module parameter can be introduced to allow users who rely upon
fTPM functionality to turn it on even though this problem is present.
Link: https://www.amd.com/en/support/kb/faq/pa-410
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989
Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/
Fixes: b006c439d5 ("hwrng: core - start hwrng kthread also for untrusted sources")
Cc: stable@vger.kernel.org
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Tested-by: reach622@mailcuk.com
Tested-by: Bell <1138267643@qq.com>
Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Pull xfs fixes from Darrick Wong:
- Fix a crash if mount time quotacheck fails when there are inodes
queued for garbage collection.
- Fix an off by one error when discarding folios after writeback
failure.
* tag 'xfs-6.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix off-by-one-block in xfs_discard_folio()
xfs: quotacheck failure can race with background inode inactivation
Pull staging driver fixes and removal from Greg KH:
"Here are four small staging driver fixes, and one big staging driver
deletion for 6.3-rc2.
The fixes are:
- rtl8192e driver fixes for where the driver was attempting to
execute various programs directly from the disk for unknown reasons
- rtl8723bs driver fixes for issues found by Hans in testing
The deleted driver is the removal of the r8188eu wireless driver as
now in 6.3-rc1 we have a "real" wifi driver for one that includes
support for many many more devices than this old driver did. So it's
time to remove it as it is no longer needed. The maintainers of this
driver all have acked its removal. Many thanks to them over the years
for working to clean it up and keep it working while the real driver
was being developed.
All of these have been in linux-next this week with no reported
problems"
* tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: delete driver
staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss()
staging: rtl8723bs: Fix key-store index handling
staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh
staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a script
Pull x86 fix from Borislav Petkov:
"A single erratum fix for AMD machines:
- Disable XSAVES on AMD Zen1 and Zen2 machines due to an erratum. No
impact to anything as those machines will fallback to XSAVEC which
is equivalent there"
* tag 'x86_urgent_for_v6.3_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Disable XSAVES on AMD family 0x17
Pull clone3 fix from Christian Brauner:
"A simple fix for the clone3() system call.
The CLONE_NEWTIME allows the creation of time namespaces. The flag
reuses a bit from the CSIGNAL bits that are used in the legacy clone()
system call to set the signal that gets sent to the parent after the
child exits.
The clone3() system call doesn't rely on CSIGNAL anymore as it uses a
dedicated .exit_signal field in struct clone_args. So we blocked all
CSIGNAL bits in clone3_args_valid(). When CLONE_NEWTIME was introduced
and reused a CSIGNAL bit we forgot to adapt clone3_args_valid()
causing CLONE_NEWTIME with clone3() to be rejected. Fix this"
* tag 'kernel.fork.v6.3-rc2' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
selftests/clone3: test clone3 with CLONE_NEWTIME
fork: allow CLONE_NEWTIME in clone3 flags
Pull vfs fixes from Christian Brauner:
- When allocating pages for a watch queue failed, we didn't return an
error causing userspace to proceed even though all subsequent
notifcations would be lost. Make sure to return an error.
- Fix a misformed tree entry for the idmapping maintainers entry.
- When setting file leases from an idmapped mount via
generic_setlease() we need to take the idmapping into account
otherwise taking a lease would fail from an idmapped mount.
- Remove two redundant assignments, one in splice code and the other in
locks code, that static checkers complained about.
* tag 'vfs.misc.v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
filelocks: use mount idmapping for setlease permission check
fs/locks: Remove redundant assignment to cmd
splice: Remove redundant assignment to ret
MAINTAINERS: repair a malformed T: entry in IDMAPPED MOUNTS
watch_queue: fix IOC_WATCH_QUEUE_SET_SIZE alloc error paths
Pull ext4 fixes from Ted Ts'o:
"Bug fixes and regressions for ext4, the most serious of which is a
potential deadlock during directory renames that was introduced during
the merge window discovered by a combination of syzbot and lockdep"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: zero i_disksize when initializing the bootloader inode
ext4: make sure fs error flag setted before clear journal error
ext4: commit super block if fs record error when journal record without error
ext4, jbd2: add an optimized bmap for the journal inode
ext4: fix WARNING in ext4_update_inline_data
ext4: move where set the MAY_INLINE_DATA flag is set
ext4: Fix deadlock during directory rename
ext4: Fix comment about the 64BIT feature
docs: ext4: modify the group desc size to 64
ext4: fix another off-by-one fsmap error on 1k block filesystems
ext4: fix RENAME_WHITEOUT handling for inline directories
ext4: make kobj_type structures constant
ext4: fix cgroup writeback accounting with fs-layer encryption
The cpumask_check() was unnecessarily tight, and causes problems for the
users of cpumask_next().
We have a number of users that take the previous return value of one of
the bit scanning functions and subtract one to keep it in "range". But
since the scanning functions end up returning up to 'small_cpumask_bits'
instead of the tighter 'nr_cpumask_bits', the range really needs to be
using that widened form.
[ This "previous-1" behavior is also the reason we have all those
comments about /* -1 is a legal arg here. */ and separate checks for
that being ok. So we could have just made "small_cpumask_bits-1"
be a similar special "don't check this" value.
Tetsuo Handa even suggested a patch that only does that for
cpumask_next(), since that seems to be the only actual case that
triggers, but that all makes it even _more_ magical and special. So
just relax the check ]
One example of this kind of pattern being the 'c_start()' function in
arch/x86/kernel/cpu/proc.c, but also duplicated in various forms on
other architectures.
Reported-by: syzbot+96cae094d90877641f32@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=96cae094d90877641f32
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Link: https://lore.kernel.org/lkml/c1f4cc16-feea-b83c-82cf-1a1f007b7eb9@I-love.SAKURA.ne.jp/
Fixes: 596ff4a09b ("cpumask: re-introduce constant-sized cpumask optimizations")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull i2c updates from Wolfram Sang:
"This marks the end of a transition to let I2C have the same probe
semantics as other subsystems. Uwe took care that no drivers in the
current tree nor in -next use the deprecated .probe call. So, it is a
good time to switch to the new, standard semantics now.
There is also a regression fix:
- regression fix for the notifier handling of the I2C core
- final coversions of drivers away from deprecated .probe
- make .probe_new the standard probe and convert I2C core to use it
* tag 'i2c-for-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: dev: Fix bus callback return values
i2c: Convert drivers to new .probe() callback
i2c: mux: Convert all drivers to new .probe() callback
i2c: Switch .probe() to not take an id parameter
media: i2c: ov2685: convert to i2c's .probe_new()
media: i2c: ov5695: convert to i2c's .probe_new()
w1: ds2482: Convert to i2c's .probe_new()
serial: sc16is7xx: Convert to i2c's .probe_new()
mtd: maps: pismo: Convert to i2c's .probe_new()
misc: ad525x_dpot-i2c: Convert to i2c's .probe_new()
Having a per-vcpu virtual offset is a pain. It needs to be synchronized
on each update, and expands badly to a setup where different timers can
have different offsets, or have composite offsets (as with NV).
So let's start by replacing the use of the CNTVOFF_EL2 shadow register
(which we want to reclaim for NV anyway), and make the virtual timer
carry a pointer to a VM-wide offset.
This simplifies the code significantly. It also addresses two terrible bugs:
- The use of CNTVOFF_EL2 leads to some nice offset corruption
when the sysreg gets reset, as reported by Joey.
- The kvm mutex is taken from a vcpu ioctl, which goes against
the locking rules...
Reported-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230224173915.GA17407@e124191.cambridge.arm.com
Tested-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20230224191640.3396734-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
If the boot loader inode has never been used before, the
EXT4_IOC_SWAP_BOOT inode will initialize it, including setting the
i_size to 0. However, if the "never before used" boot loader has a
non-zero i_size, then i_disksize will be non-zero, and the
inconsistency between i_size and i_disksize can trigger a kernel
warning:
WARNING: CPU: 0 PID: 2580 at fs/ext4/file.c:319
CPU: 0 PID: 2580 Comm: bb Not tainted 6.3.0-rc1-00004-g703695902cfa
RIP: 0010:ext4_file_write_iter+0xbc7/0xd10
Call Trace:
vfs_write+0x3b1/0x5c0
ksys_write+0x77/0x160
__x64_sys_write+0x22/0x30
do_syscall_64+0x39/0x80
Reproducer:
1. create corrupted image and mount it:
mke2fs -t ext4 /tmp/foo.img 200
debugfs -wR "sif <5> size 25700" /tmp/foo.img
mount -t ext4 /tmp/foo.img /mnt
cd /mnt
echo 123 > file
2. Run the reproducer program:
posix_memalign(&buf, 1024, 1024)
fd = open("file", O_RDWR | O_DIRECT);
ioctl(fd, EXT4_IOC_SWAP_BOOT);
write(fd, buf, 1024);
Fix this by setting i_disksize as well as i_size to zero when
initiaizing the boot loader inode.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217159
Cc: stable@kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/r/20230308032643.641113-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now, 'es->s_state' maybe covered by recover journal. And journal errno
maybe not recorded in journal sb as IO error. ext4_update_super() only
update error information when 'sbi->s_add_error_count' large than zero.
Then 'EXT4_ERROR_FS' flag maybe lost.
To solve above issue just recover 'es->s_state' error flag after journal
replay like error info.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307061703.245965-2-yebin@huaweicloud.com
