Multiple drivers may attempt to register platform profile handlers,
but only one may be registered and the behavior is non-deterministic
for which one wins. It's mostly controlled by probing order.
This can be problematic if one driver changes CPU settings and another
driver notifies the EC for changing fan curves.
Modify the ACPI platform profile handler to let multiple drivers
register platform profile handlers and abstract this detail from userspace.
To avoid undefined behaviors only offer profiles that are commonly
advertised across multiple handlers.
If any problems occur when changing profiles for any driver, then the
drivers that were already changed remain changed and the legacy sysfs
handler will report 'custom'.
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241206031918.1537-21-mario.limonciello@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
After looking at the ACPI AML code, it seems that the command 0x0000
used with ACER_WMID_GET_GAMING_SYS_INFO_METHODID returns a bitmap of
all supported sensor indices available through the 0x0001 command.
Those sensor indices seem to include both temperature and fan speed
sensors, with only the fan speed sensors being currently supported.
Use the output of this new command to implement reliable sensor
detection. This fixes detection of fans which do not spin during
probe, as fans are currently being ignored if their speed is 0.
Also add support for the new temperature sensor ids.
Tested-by: Rayan Margham <rayanmargham4@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241210001657.3362-5-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The INT3472 code never wants a copy of the ACPI resource to be added
to the list-head passed to acpi_dev_get_resources().
Make skl_int3472_handle_gpio_resources() always return -errno or 1.
Also update the inaccurate comment about the return value.
skl_int3472_handle_gpio_resources() was already returning 1 in the case
of not a GPIO resource or invalid _DSM return and not -EINVAL / -ENODEV
as the comment claimed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241209220522.25288-3-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
It seems that Windows is only using the ACPI GPIO resources and never
looks at the part of the _DSM return value which encodes the pin number.
For example on a Terra Pad 1262 v2 the following messages are printend:
int3472-discrete INT3472:01: reset \_SB.GPI0 pin number mismatch _DSM 103 resource 359
int3472-discrete INT3472:01: powerdown \_SB.GPI0 pin number mismatch _DSM 207 resource 335
int3472-discrete INT3472:02: reset \_SB.GPI0 pin number mismatch _DSM 101 resource 357
Notice for the 2 reset pins that the _DSM value is off by 256, this is
caused by there only being 8 bits reserved in the _DSM return value for
the pin-number.
As for the powerdown pin, testing has shown that the pin-number 335 from
the ACPI GPIO resource is correct and the _DSM value is bogus.
Lower the warning about these mismatches to a debug message and only
look at the lower 8 bits of the GPIO resource pin numbers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241209220522.25288-2-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Not all devices have an ACPI companion fwnode, so adev might be NULL. This
can e.g. (theoretically) happen when a user manually binds one of
the int3472 drivers to another i2c/platform device through sysfs.
Add a check for adev not being set and return -ENODEV in that case to
avoid a possible NULL pointer deref in skl_int3472_get_acpi_buffer().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241209220522.25288-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Vexia EDU ATLA 10 tablet has an embedded controller instead of
giving the os direct access to the charger + fuel-gauge ICs as is normal
on tablets designed for Android.
There is ACPI Battery device in the DSDT using the EC which should work
except that it expects the I2C controller to be enumerated as an ACPI
device and the tablet's BIOS enumerates all LPSS devices as PCI devices
(and changing the LPSS BIOS settings from PCI -> ACPI does not work).
Add a power_supply class driver for the Atla 10 EC to expert battery info
to userspace. This is made part of the x86-android-tablets directory and
Kconfig option because the i2c_client it binds to is instantiated by
the x86-android-tablets kmod.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241204193442.65374-3-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On some Android tablets with Crystal Cove PMIC the DSDT lacks an ACPI AC
device to indicate whether a charger is plugged in or not.
Add support for registering a "crystal_cove_pwrsrc" power_supply class
device to indicate charger online status. This is made conditional on
a "linux,register-pwrsrc-power_supply" boolean device-property to avoid
registering a duplicate power_supply class device on devices where this
is already handled by an ACPI AC device.
Note the "linux,register-pwrsrc-power_supply" property is only used on
x86/ACPI (non devicetree) devs and the devicetree-bindings maintainers
have requested properties like these to not be added to the devicetree
bindings, so the new property is deliberately not added to any bindings.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241204193442.65374-2-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On the Vexia EDU ATLA 10 tablet, which ships with Android + a custom Linux
(guadalinex) using the custom Android kernel the UART controllers are not
enumerated as ACPI devices as they typically are.
Instead they are enumerated through PCI and getting the serdev-controller
by ACPI HID + UID does not work.
Add support for getting the serdev-controller by the PCI devfn of its
parent instead.
This also renames the use_pci_devname flag to use_pci since the former
name now no longer is accurate.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241204204227.95757-8-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The x86-android-tablets code needs to be able to get a serdev_controller
device from a PCI parent, rather then by the ACPI HID+UID of the parent,
because on some tablets the UARTs are enumerated as PCI devices instead
of ACPI devices.
Split the code to walk the device hierarchy to find the serdev_controller
from its parents out into a get_serdev_controller_from_parent() helper
so that the x86-android-tablets code can re-use it.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241204204227.95757-5-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Commit cdd30ebb1b ("module: Convert symbol namespace to string
literal") only converted MODULE_IMPORT_NS() and EXPORT_SYMBOL_NS(),
leaving DEFAULT_SYMBOL_NAMESPACE as a macro expansion.
This commit converts DEFAULT_SYMBOL_NAMESPACE in the same way to avoid
annoyance for the default namespace as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts the misconversions introduced by commit cdd30ebb1b
("module: Convert symbol namespace to string literal").
The affected descriptions refer to MODULE_IMPORT_NS() tags in general,
rather than suggesting the use of the empty string ("") as the
namespace.
Fixes: cdd30ebb1b ("module: Convert symbol namespace to string literal")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit cdd30ebb1b ("module: Convert symbol namespace to string
literal"), when MODULE_IMPORT_NS() is missing, 'make nsdeps' inserts
pointless code:
MODULE_IMPORT_NS("ns");
Here, "ns" is not a namespace, but the variable in the semantic patch.
It must not be quoted. Instead, a string literal must be passed to
Coccinelle.
Fixes: cdd30ebb1b ("module: Convert symbol namespace to string literal")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
