There's no need to add planes to the atomic state. Remove the call
to drm_atomic_add_affected_planes() from ssd130x.
On full modesets, the DRM helpers already add a CRTC's planes to the
atomic state; see drm_atomic_helper_check_modeset(). There's no reason
to call drm_atomic_add_affected_planes() unconditionally in the CRTC's
atomic_check() in ssd130x. It's also too late, as the atomic_check()
of the added planes will not be called before the commit.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011165136.469750-4-javierm@redhat.com
There's no need to add planes to the atomic state. Remove the call
to drm_atomic_add_affected_planes() from simpledrm.
On full modesets, the DRM helpers already add a CRTC's planes to the
atomic state; see drm_atomic_helper_check_modeset(). There's no reason
to call drm_atomic_add_affected_planes() unconditionally in the CRTC's
atomic_check() in simpledrm. It's also too late, as the atomic_check()
of the added planes will not be called before the commit.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011165136.469750-3-javierm@redhat.com
There's no need to add planes to the atomic state. Remove the call
to drm_atomic_add_affected_planes() from mgag200.
On full modesets, the DRM helpers already add a CRTC's planes to the
atomic state; see drm_atomic_helper_check_modeset(). There's no reason
to call drm_atomic_add_affected_planes() unconditionally in the CRTC's
atomic_check() in mgag200. It's also too late, as the atomic_check()
of the added planes will not be called before the commit.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011165136.469750-2-javierm@redhat.com
When build Linux kernel with 'make C=2', encounter the following warnings:
./drivers/gpu/drm/nouveau/dispnv50/disp.c:134:34: warning: cast removes address space '__iomem' of expression
./drivers/gpu/drm/nouveau/dispnv50/disp.c:197:34: warning: cast removes address space '__iomem' of expression
The data type of dmac->_push.mem.object.map.ptr is 'void __iomem *', but
converted to 'u32 *' directly and cause above warnings, now
recover their data types to fix these warnings.
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220924092516.10007-1-ruanjinjie@huawei.com
It is fairly common for named video modes to contain dashes (e.g.
"tt-mid" on Atari, "dblntsc-ff" on Amiga). Currently such mode names
are not recognized, as the dash is considered to be a separator between
mode name and bpp.
Fix this by skipping any dashes that are not followed immediately by a
digit when looking for the separator.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-13-60d38873f782@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Some video= options might have a value that contains a dash. However, the
command line parsing mode considers all dashes as the separator between the
mode and the bpp count.
Let's rework the parsing code a bit to only consider a dash as the bpp
separator if it before a comma, the options separator.
A follow-up patch will add a unit-test for this once such an option is
introduced.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-12-60d38873f782@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
There is two TV subconnector related properties registered by
drm_mode_create_tv_properties(): subconnector and select subconnector.
While the select subconnector property is stored in the kernel by the
drm_tv_connector_state structure, the subconnector property isn't stored
anywhere.
Worse, the select subconnector property is stored in a field called
subconnector, creating some ambiguity about which property content we're
accessing.
Let's rename that field to one called select_subconnector to make it move
obvious what it's about.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-5-60d38873f782@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
We currently have two sets of TV properties.
The first one is there to deal with analog TV properties, creating
properties such as the TV mode, subconnectors, saturation, hue and so on.
It's created by calling the drm_mode_create_tv_properties() function.
The second one is there to deal with properties that might be useful on a
TV, creating the overscan margins for example. It's created by calling the
drm_mode_create_tv_margin_properties().
However, we also have a drm_atomic_helper_connector_tv_reset() function
that will reset the TV margin properties to their default values, and thus
is supposed to be called for the latter set. This creates an ambiguity due
to the inconsistent naming.
We can thus rename the drm_atomic_helper_connector_tv_reset() function to
drm_atomic_helper_connector_tv_margins_reset() to remove that ambiguity
and hopefully make it more obvious.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-4-60d38873f782@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Rename the atomic helper function drm_atomic_helper_check_crtc_state()
to drm_atomic_helper_check_crtc_primary_plane() and only check for an
attached primary plane. Adapt callers.
Instead of having one big function to check for various CRTC state
conditions, we rather want smaller functions that drivers can pick
individually.
v5:
* rebase on top of udl changes
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221007124338.24152-3-tzimmermann@suse.de
In drm_atomic_helper_check_crtc_state(), do not add a new plane state
to the global state if it does not exist already. Adding a new plane
state will result in overhead for the plane during the atomic-commit
step.
For the test in drm_atomic_helper_check_crtc_state() to succeed, it
is important that the CRTC has an enabled primary plane after the
commit. Simply testing the CRTC state's plane_mask for a primary plane
is sufficient.
Note that the helper still only tests for an attached primary plane.
Drivers have to ensure that the plane contains valid pixel information.
v5:
* fix commit description (Javier)
v3:
* test for a primary plane in plane_mask (Ville)
v2:
* remove unnecessary test for plane->crtc (Ville)
* inline drm_atomic_get_next_plane_state() (Ville)
* acquire plane lock before accessing plane->state (Ville)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Fixes: d6b9af1097 ("drm/atomic-helper: Add helper drm_atomic_helper_check_crtc_state()")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20221007124338.24152-2-tzimmermann@suse.de
Use a damage iterator to process damage areas individually. Merging
damage areas can result in large updates of unchanged framebuffer
regions. As USB is rather slow, it's better to process damage areas
individually and hence minimize USB-transfered data.
As part of the change, move drm_gem_fb_{begin,end}_cpu_access() into
the plane's atomic_update helper. To avoid overhead and intermediate
writers, we want to synchronize buffers and reserve access only once
before copying damage areas of the framebuffer.
v2:
* clarify commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-11-tzimmermann@suse.de
Replace simple-KMS helpers with regular atomic-modesetting helpers.
The simple-KMS helpers introduce a mid-layer abstraction without
added functionality. Using regular atomic helpers makes the driver's
implementation more discoverable and simplifies code sharing.
The conversion effectively open-codes the simple-KMS functions and
data structure within udl. No functional changes.
v2:
* don't use the atomic_disable plane helper
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-8-tzimmermann@suse.de
The current ast driver only supports legacy gamma interface.
This also fixes a Gnome3/Wayland error which incorrectly adds
gamma to atomic commit:
"Page flip discarded: CRTC property (GAMMA_LUT) not found"
I only tested remotely, so I wasn't able to check that it had
an effect on the VGA output. But when activating "Night Light"
in Gnome, ast_crtc_load_lut() is called.
v2: use the same functions as mgag200.
handle 16bits color mode.
v3: Check gamma_lut size in atomic check.
v4: revert 16bits mode, v1 was correct.
make sure gamma table are set when primary plane format
changes.
remove rgb888 format that is not used.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930094754.745626-1-jfalempe@redhat.com
Prefer the timing formula indicated by the range
descriptor for generating the non-DMT standard timings.
Previously we just used CVT for all EDID 1.4 continuous
frequency displays without even checking if the range
descriptor indicates otherwise. Now we check the range
descriptor first, and fall back to CVT if nothing else
was indicated. EDID 1.4 more or less deprecates GTF/GTF2
but there are still a lot of 1.4 EDIDs out there that
don't advertise CVT support, so seems safer to use the
formula the EDID actually reports as supported.
For EDID 1.3 we use GTF2 if indicated (as before), and for
EDID 1.2+ we now just use GTF without even checking the
feature flag. There seem to be quite a few EDIDs out there that
don't set the GTF feature flag but still include a GTF range
descriptor and non-DMT standard timings.
This to me seems to be roughly what appendix B of EDID 1.4
suggests should be done.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927170006.27855-7-ville.syrjala@linux.intel.com
