The TCP session does not terminate with TCP_USER_TIMEOUT when data
remain untransmitted due to zero window.
The number of unanswered zero-window probes (tcp_probes_out) is
reset to zero with incoming acks irrespective of the window size,
as described in tcp_probe_timer():
RFC 1122 4.2.2.17 requires the sender to stay open indefinitely
as long as the receiver continues to respond probes. We support
this by default and reset icsk_probes_out with incoming ACKs.
This counter, however, is the wrong one to be used in calculating the
duration that the window remains closed and data remain untransmitted.
Thanks to Jonathan Maxwell <jmaxwell37@gmail.com> for diagnosing the
actual issue.
In this patch a new timestamp is introduced for the socket in order to
track the elapsed time for the zero-window probes that have not been
answered with any non-zero window ack.
Fixes: 9721e709fa ("tcp: simplify window probe aborting on USER_TIMEOUT")
Reported-by: William McCall <william.mccall@gmail.com>
Co-developed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Enke Chen <enchen@paloaltonetworks.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210115223058.GA39267@localhost.localdomain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The multicast route ff00::/8 is created with type RTN_UNICAST:
$ ip -6 -d route
unicast ::1 dev lo proto kernel scope global metric 256 pref medium
unicast fe80::/64 dev eth0 proto kernel scope global metric 256 pref medium
unicast ff00::/8 dev eth0 proto kernel scope global metric 256 pref medium
Set the type to RTN_MULTICAST which is more appropriate.
Fixes: e8478e80e5 ("net/ipv6: Save route type in rt6_info")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ff00::/8 multicast route is created without specifying the fc_protocol
field, so the default RTPROT_BOOT value is used:
$ ip -6 -d route
unicast ::1 dev lo proto kernel scope global metric 256 pref medium
unicast fe80::/64 dev eth0 proto kernel scope global metric 256 pref medium
unicast ff00::/8 dev eth0 proto boot scope global metric 256 pref medium
As the documentation says, this value identifies routes installed during
boot, but the route is created when interface is set up.
Change the value to RTPROT_KERNEL which is a better value.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johannes Berg says:
====================
Various fixes:
* kernel-doc parsing fixes
* incorrect debugfs string checks
* locking fix in regulatory
* some encryption-related fixes
* tag 'mac80211-for-net-2021-01-18.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211:
mac80211: check if atf has been disabled in __ieee80211_schedule_txq
mac80211: do not drop tx nulldata packets on encrypted links
mac80211: fix encryption key selection for 802.3 xmit
mac80211: fix fast-rx encryption check
mac80211: fix incorrect strlen of .write in debugfs
cfg80211: fix a kerneldoc markup
cfg80211: Save the regulatory domain with a lock
cfg80211/mac80211: fix kernel-doc for SAR APIs
====================
Link: https://lore.kernel.org/r/20210118204750.7243-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mv88e6xxx_port_vlan_join checks whether the VTU already contains an
entry for the given vid (via mv88e6xxx_vtu_getnext), and if so, merely
changes the relevant .member[] element and loads the updated entry
into the VTU.
However, at least for the mv88e6250, the on-stack struct
mv88e6xxx_vtu_entry vlan never has its .state[] array explicitly
initialized, neither in mv88e6xxx_port_vlan_join() nor inside the
getnext implementation. So the new entry has random garbage for the
STU bits, breaking VLAN filtering.
When the VTU entry is initially created, those bits are all zero, and
we should make sure to keep them that way when the entry is updated.
Fixes: 92307069a9 (net: dsa: mv88e6xxx: Avoid VTU corruption on 6097)
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Tested-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The blamed commit was too aggressive, and it made ocelot_netdevice_event
react only to network interface events emitted for the ocelot switch
ports.
In fact, only the PRECHANGEUPPER should have had that check.
When we ignore all events that are not for us, we miss the fact that the
upper of the LAG changes, and the bonding interface gets enslaved to a
bridge. This is an operation we could offload under certain conditions.
Fixes: 7afb3e575e ("net: mscc: ocelot: don't handle netdev events for other netdevs")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210118135210.2666246-1-olteanv@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 3226b158e6 ("net: avoid 32 x truesize under-estimation for
tiny skbs") ensured that skbs with data size lower than 1025 bytes
will be kmalloc'ed to avoid excessive page cache fragmentation and
memory consumption.
However, the fix adressed only __napi_alloc_skb() (primarily for
virtio_net and napi_get_frags()), but the issue can still be achieved
through __netdev_alloc_skb(), which is still used by several drivers.
Drivers often allocate a tiny skb for headers and place the rest of
the frame to frags (so-called copybreak).
Mirror the condition to __netdev_alloc_skb() to handle this case too.
Since v1 [0]:
- fix "Fixes:" tag;
- refine commit message (mention copybreak usecase).
[0] https://lore.kernel.org/netdev/20210114235423.232737-1-alobakin@pm.me
Fixes: a1c7fff7e1 ("net: netdev_alloc_skb() use build_skb()")
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Link: https://lore.kernel.org/r/20210115150354.85967-1-alobakin@pm.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2021-01-16
1) Fix a double bpf_prog_put() for BPF_PROG_{TYPE_EXT,TYPE_TRACING} types in
link creation's error path causing a refcount underflow, from Jiri Olsa.
2) Fix BTF validation errors for the case where kernel modules don't declare
any new types and end up with an empty BTF, from Andrii Nakryiko.
3) Fix BPF local storage helpers to first check their {task,inode} owners for
being NULL before access, from KP Singh.
4) Fix a memory leak in BPF setsockopt handling for the case where optlen is
zero and thus temporary optval buffer should be freed, from Stanislav Fomichev.
5) Fix a syzbot memory allocation splat in BPF_PROG_TEST_RUN infra for
raw_tracepoint caused by too big ctx_size_in, from Song Liu.
6) Fix LLVM code generation issues with verifier where PTR_TO_MEM{,_OR_NULL}
registers were spilled to stack but not recognized, from Gilad Reti.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
MAINTAINERS: Update my email address
selftests/bpf: Add verifier test for PTR_TO_MEM spill
bpf: Support PTR_TO_MEM{,_OR_NULL} register spilling
bpf: Reject too big ctx_size_in for raw_tp test run
libbpf: Allow loading empty BTFs
bpf: Allow empty module BTFs
bpf: Don't leak memory in bpf getsockopt when optlen == 0
bpf: Update local storage test to check handling of null ptrs
bpf: Fix typo in bpf_inode_storage.c
bpf: Local storage helpers should check nullness of owner ptr passed
bpf: Prevent double bpf_prog_put call from bpf_tracing_prog_attach
====================
Link: https://lore.kernel.org/r/20210116002025.15706-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull kselftest fixes from Shuah Khan:
"One single fix to skip BPF selftests by default.
BPF selftests have a hard dependency on cutting edge versions of tools
in the BPF ecosystem including LLVM.
Skipping BPF allows by default will make it easier for users
interested in running kselftest as a whole. Users can include BPF in
Kselftest build by via SKIP_TARGETS variable"
* tag 'linux-kselftest-fixes-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: Skip BPF seftests by default
Pull networking fixes from Jakub Kicinski:
"We have a few fixes for long standing issues, in particular Eric's fix
to not underestimate the skb sizes, and my fix for brokenness of
register_netdevice() error path. They may uncover other bugs so we
will keep an eye on them. Also included are Willem's fixes for
kmap(_atomic).
Looking at the "current release" fixes, it seems we are about one rc
behind a normal cycle. We've previously seen an uptick of "people had
run their test suites" / "humans actually tried to use new features"
fixes between rc2 and rc3.
Summary:
Current release - regressions:
- fix feature enforcement to allow NETIF_F_HW_TLS_TX if IP_CSUM &&
IPV6_CSUM
- dcb: accept RTM_GETDCB messages carrying set-like DCB commands if
user is admin for backward-compatibility
- selftests/tls: fix selftests build after adding ChaCha20-Poly1305
Current release - always broken:
- ppp: fix refcount underflow on channel unbridge
- bnxt_en: clear DEFRAG flag in firmware message when retry flashing
- smc: fix out of bound access in the new netlink interface
Previous releases - regressions:
- fix use-after-free with UDP GRO by frags
- mptcp: better msk-level shutdown
- rndis_host: set proper input size for OID_GEN_PHYSICAL_MEDIUM
request
- i40e: xsk: fix potential NULL pointer dereferencing
Previous releases - always broken:
- skb frag: kmap_atomic fixes
- avoid 32 x truesize under-estimation for tiny skbs
- fix issues around register_netdevice() failures
- udp: prevent reuseport_select_sock from reading uninitialized socks
- dsa: unbind all switches from tree when DSA master unbinds
- dsa: clear devlink port type before unregistering slave netdevs
- can: isotp: isotp_getname(): fix kernel information leak
- mlxsw: core: Thermal control fixes
- ipv6: validate GSO SKB against MTU before finish IPv6 processing
- stmmac: use __napi_schedule() for PREEMPT_RT
- net: mvpp2: remove Pause and Asym_Pause support
Misc:
- remove from MAINTAINERS folks who had been inactive for >5yrs"
* tag 'net-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
mptcp: fix locking in mptcp_disconnect()
net: Allow NETIF_F_HW_TLS_TX if IP_CSUM && IPV6_CSUM
MAINTAINERS: dccp: move Gerrit Renker to CREDITS
MAINTAINERS: ipvs: move Wensong Zhang to CREDITS
MAINTAINERS: tls: move Aviad to CREDITS
MAINTAINERS: ena: remove Zorik Machulsky from reviewers
MAINTAINERS: vrf: move Shrijeet to CREDITS
MAINTAINERS: net: move Alexey Kuznetsov to CREDITS
MAINTAINERS: altx: move Jay Cliburn to CREDITS
net: avoid 32 x truesize under-estimation for tiny skbs
nt: usb: USB_RTL8153_ECM should not default to y
net: stmmac: fix taprio configuration when base_time is in the past
net: stmmac: fix taprio schedule configuration
net: tip: fix a couple kernel-doc markups
net: sit: unregister_netdevice on newlink's error path
net: stmmac: Fixed mtu channged by cache aligned
cxgb4/chtls: Fix tid stuck due to wrong update of qid
i40e: fix potential NULL pointer dereferencing
net: stmmac: use __napi_schedule() for PREEMPT_RT
can: mcp251xfd: mcp251xfd_handle_rxif_one(): fix wrong NULL pointer check
...
ieee80211_tx_h_select_key drops any non-mgmt packets without a key when
encryption is used. This is wrong for nulldata packets that can't be
encrypted and are sent out for probing clients and indicating 4-address
mode.
Reported-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Fixes: a0761a3017 ("mac80211: drop data frames without key on encrypted links")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20201218191525.1168-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This fixes strlen mismatch problems happening in some .write callbacks
of debugfs.
When trying to configure airtime_flags in debugfs, an error appeared:
ash: write error: Invalid argument
The error is returned from kstrtou16() since a wrong length makes it
miss the real end of input string. To fix this, use count as the string
length, and set proper end of string for a char buffer.
The debug print is shown - airtime_flags_write: count = 2, len = 8,
where the actual length is 2, but "len = strlen(buf)" gets 8.
Also cleanup the other similar cases for the sake of consistency.
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210112032028.7482-1-shayne.chen@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pull HID fixes from Jiri Kosina:
- memory leak fix for Wacom driver (Ping Cheng)
- various trivial small fixes, cleanups and device ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: logitech-hidpp: Add product ID for MX Ergo in Bluetooth mode
HID: Ignore battery for Elan touchscreen on ASUS UX550
HID: logitech-dj: add the G602 receiver
HID: wiimote: remove h from printk format specifier
HID: uclogic: remove h from printk format specifier
HID: sony: select CONFIG_CRC32
HID: sfh: fix address space confusion
HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad device
HID: wacom: Fix memory leakage caused by kfifo_alloc
Cited patch below blocked the TLS TX device offload unless HW_CSUM
is set. This broke devices that use IP_CSUM && IP6_CSUM.
Here we fix it.
Note that the single HW_TLS_TX feature flag indicates support for
both IPv4/6, hence it should still be disabled in case only one of
(IP_CSUM | IPV6_CSUM) is set.
Fixes: ae0b04b238 ("net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reported-by: Rohit Maheshwari <rohitm@chelsio.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Link: https://lore.kernel.org/r/20210114151215.7061-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To make maintainers' lives easier we're trying to nudge people
towards CCing all the relevant folks on patches, in an attempt
to improve review rate. We have a check in patchwork which validates
the CC list against get_maintainers.pl. It's a little awkward, however,
to force people to CC maintainers who we haven't seen on the mailing
list for years. This series removes from maintainers folks who didn't
provide any tag (incl. authoring a patch) in the last 5 years.
To ensure reasonable signal to noise ratio we only considered
MAINTAINERS entries which had more than 100 patches fall under
them in that time period.
All this is purely a process-greasing exercise, I hope nobody
sees this series as an affront. Most folks are moved to CREDITS,
a couple entries are simply removed.
The following inactive maintainers are kept, because they indicated
the intention to come back in the near future:
- Veaceslav Falico (bonding)
- Christian Benvenuti (Cisco drivers)
- Felix Fietkau (mtk-eth)
- Mirko Linder (skge/sky2)
Patches in this series contain report from a script which did
the analysis. Big thanks to Jonathan Corbet for help and writing
the script (although I feel like I used it differently than Jon
may have intended ;)). The output format is thus:
Subsystem $name
Changes $reviewed / $total ($percent%) // how many changes to the subsystem had at least one ack/review
Last activity: $date_of_most_recent_patch
$maintainer/reviewer1:
Author $last_commit_authored_by_the_person $how_many_in_5yrs
Committer $last_committed $how_many
Tags $last_tag_like_review_signoff_etc $how_many
$maintainer/reviewer2:
Author $last_commit_authored_by_the_person $how_many_in_5yrs
Committer $last_committed $how_many
Tags $last_tag_like_review_signoff_etc $how_many
Top reviewers: // Top 3 reviewers (who are not listed in MAINTAINERS)
[$count_of_reviews_and_acks]: $email
INACTIVE MAINTAINER $name // maintainer / reviewer who has done nothing in last 5yrs
v2:
- keep Felix and Mirko
Link: https://lore.kernel.org/r/20210114014912.2519931-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As far as I can tell we haven't heard from Gerrit for roughly
5 years now. DCCP patch would really benefit from some review.
Gerrit was the last maintainer so mark this entry as orphaned.
Subsystem DCCP PROTOCOL
Changes 38 / 166 (22%)
(No activity)
Top reviewers:
[6]: kstewart@linuxfoundation.org
[6]: allison@lohutok.net
[5]: edumazet@google.com
INACTIVE MAINTAINER Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both virtio net and napi_get_frags() allocate skbs
with a very small skb->head
While using page fragments instead of a kmalloc backed skb->head might give
a small performance improvement in some cases, there is a huge risk of
under estimating memory usage.
For both GOOD_COPY_LEN and GRO_MAX_HEAD, we can fit at least 32 allocations
per page (order-3 page in x86), or even 64 on PowerPC
We have been tracking OOM issues on GKE hosts hitting tcp_mem limits
but consuming far more memory for TCP buffers than instructed in tcp_mem[2]
Even if we force napi_alloc_skb() to only use order-0 pages, the issue
would still be there on arches with PAGE_SIZE >= 32768
This patch makes sure that small skb head are kmalloc backed, so that
other objects in the slab page can be reused instead of being held as long
as skbs are sitting in socket queues.
Note that we might in the future use the sk_buff napi cache,
instead of going through a more expensive __alloc_skb()
Another idea would be to use separate page sizes depending
on the allocated length (to never have more than 4 frags per page)
I would like to thank Greg Thelen for his precious help on this matter,
analysing crash dumps is always a time consuming task.
Fixes: fd11a83dd3 ("net: Pull out core bits of __netdev_alloc_skb and add __napi_alloc_skb")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20210113161819.1155526-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Synopsys TSN MAC supports Qbv base times in the past, but only up to a
certain limit. As a result, a taprio qdisc configuration with a small
base time (for example when treating the base time as a simple phase
offset) is not applied by the hardware and silently ignored.
This was observed on an NXP i.MX8MPlus device, but likely affects all
TSN-variants of the MAC.
Fix the issue by making sure the base time is in the future, pushing it by
an integer amount of cycle times if needed. (a similar check is already
done in several other taprio implementations, see for example
drivers/net/ethernet/intel/igc/igc_tsn.c#L116 or
drivers/net/dsa/sja1105/sja1105_ptp.h#L39).
Fixes: b60189e039 ("net: stmmac: Integrate EST with TAPRIO scheduler API")
Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Link: https://lore.kernel.org/r/20210113131557.24651-2-yannick.vignon@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When configuring a 802.1Qbv schedule through the tc taprio qdisc on an NXP
i.MX8MPlus device, the effective cycle time differed from the requested one
by N*96ns, with N number of entries in the Qbv Gate Control List. This is
because the driver was adding a 96ns margin to each interval of the GCL,
apparently to account for the IPG. The problem was observed on NXP
i.MX8MPlus devices but likely affected all devices relying on the same
configuration callback (dwmac 4.00, 4.10, 5.10 variants).
Fix the issue by removing the margins, and simply setup the MAC with the
provided cycle time value. This is the behavior expected by the user-space
API, as altering the Qbv schedule timings would break standards conformance.
This is also the behavior of several other Ethernet MAC implementations
supporting taprio, including the dwxgmac variant of stmmac.
Fixes: 504723af0d ("net: stmmac: Add basic EST support for GMAC5+")
Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Link: https://lore.kernel.org/r/20210113131557.24651-1-yannick.vignon@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A function has a different name between their prototype
and its kernel-doc markup:
../net/tipc/link.c:2551: warning: expecting prototype for link_reset_stats(). Prototype was for tipc_link_reset_stats() instead
../net/tipc/node.c:1678: warning: expecting prototype for is the general link level function for message sending(). Prototype was for tipc_node_xmit() instead
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Logitech MX Ergo trackball supports HID++ 4.5 over Bluetooth. Add its
product ID to the table so we can get battery monitoring support.
(The hid-logitech-hidpp driver already recognizes it when connected via
a Unifying Receiver.)
[jkosina@suse.cz: fix whitespace damage]
Signed-off-by: Nicholas Miell <nmiell@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add a test to check that the verifier is able to recognize spilling of
PTR_TO_MEM registers, by reserving a ringbuf buffer, forcing the spill
of a pointer holding the buffer address to the stack, filling it back
in from the stack and writing to the memory area pointed by it.
The patch was partially contributed by CyberArk Software, Inc.
Signed-off-by: Gilad Reti <gilad.reti@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20210113053810.13518-2-gilad.reti@gmail.com
Add support for pointer to mem register spilling, to allow the verifier
to track pointers to valid memory addresses. Such pointers are returned
for example by a successful call of the bpf_ringbuf_reserve helper.
The patch was partially contributed by CyberArk Software, Inc.
Fixes: 457f44363a ("bpf: Implement BPF ring buffer and verifier support for it")
Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Gilad Reti <gilad.reti@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20210113053810.13518-1-gilad.reti@gmail.com
TID stuck is seen when there is a race in
CPL_PASS_ACCEPT_RPL/CPL_ABORT_REQ and abort is arriving
before the accept reply, which sets the queue number.
In this case HW ends up sending CPL_ABORT_RPL_RSS to an
incorrect ingress queue.
V1->V2:
- Removed the unused variable len in chtls_set_quiesce_ctrl().
V2->V3:
- As kfree_skb() has a check for null skb, so removed this
check before calling kfree_skb() in func chtls_send_reset().
Fixes: cc35c88ae4 ("crypto : chtls - CPL handler definition")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Link: https://lore.kernel.org/r/20210112053600.24590-1-ayush.sawal@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the function i40e_construct_skb_zc only frees the input xdp
buffer when the output skb is successfully built. On error, the
function i40e_clean_rx_irq_zc does not commit anything for the current
packet descriptor and simply exits the packet descriptor processing
loop, with the plan to restart the processing of this descriptor on
the next invocation. Therefore, on error the ring next-to-clean
pointer should not advance, the xdp i.e. *bi buffer should not be
freed and the current buffer info should not be invalidated by setting
*bi to NULL. Therefore, the *bi should only be set to NULL when the
function i40e_construct_skb_zc is successful, otherwise a NULL *bi
will be dereferenced when the work for the current descriptor is
eventually restarted.
Fixes: 3b4f0b66c2 ("i40e, xsk: Migrate to new MEM_TYPE_XSK_BUFF_POOL")
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/r/20210111181138.49757-1-cristian.dumitrescu@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marc Kleine-Budde says:
====================
pull-request: can 2021-01-13
The first patch is by Oliver Hartkopp for the CAn ISO-TP protocol and fixes a
kernel information leak to userspace.
The last patch is by Qinglang Miao for the mcp251xfd driver and fixes a NULL
pointer check to work on the correct variable.
* tag 'linux-can-fixes-for-5.11-20210113' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: mcp251xfd: mcp251xfd_handle_rxif_one(): fix wrong NULL pointer check
can: isotp: isotp_getname(): fix kernel information leak
====================
Link: https://lore.kernel.org/r/20210113212158.925513-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use of __napi_schedule_irqoff() is not safe with PREEMPT_RT in which
hard interrupts are not disabled while running the threaded interrupt.
Using __napi_schedule() works for both PREEMPT_RT and mainline Linux,
just at the cost of an additional check if interrupts are disabled for
mainline (since they are already disabled).
Similar to the fix done for enetc commit 215602a8d2 ("enetc: use
napi_schedule to be compatible with PREEMPT_RT")
Signed-off-by: Seb Laveze <sebastien.laveze@nxp.com>
Link: https://lore.kernel.org/r/20210112140121.1487619-1-sebastien.laveze@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
