This commit enlarges the hashtable size of
kfd_process to 256, because of the multiple
contexts feature allowing each application
create multiple kfd_processes
Signed-off-by: Zhu Lingshan <lingshan.zhu@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add SDMA ip block for SDMA v7_1_0.
v2: squash in queue reset changes (Alex)
v3: squash in version fix (Hawking)
v4: squash in various fixes
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Acked-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1_0 is a new generation ip block
v2: squash in doorbell changes (Alex)
v3: squash in xclk, reset placeholders, pcie r|wreg ext callbacks
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
function "devm_memremap_pages" in function "kgd2kfd_init_zone_device",
sometimes cost too much time.
[How]
move the function "kgd2kfd_init_zone_device"
after release full gpu access(amdgpu_virt_release_full_gpu).
v2:
improve the coding style.
Signed-off-by: chong li <chongli2@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following updates:
- Add additional checks for PSP footer size
- Correct DSC padding accounting
- Check ATOM_DEVICE_CRT2_SUPPORT in dc_load_detection
- Drop FPU flags from dml21_wrapper.c
- Permit DC_FP_START/END only in non-FP compilation units
- Add cursor offload abort to the new HWSS path
- Move dml2_create and init to the non-FPU dml2_wrapper
- Move dml2_validate to the non-FPU dml2_wrapper
- Rename dml2_wrapper.c to dml2_wrapper_fpu.c
- Increase EDID read retries
- Correct comment style
- Move CONNECTOR_ID_PCIE into switch/case
- Drop needless check for link->link_id.id
- Improve readability of link_detect_sink_signal_type
- Don't change brightness for disabled connectors
- Write default Vesa Aux backlight control in dmub
- Refactor panel replay dc libs
- Revise VSC SDP header for Panel Replay
- Fix sending redundant enable command to dmub
- Parse debug flag to PR FW
- Add AS-SDP v2 support for eDP feature
- Refactor panel replay set dmub cmd flow
- Improve HDMI info retrieval
- Check NULL before accessing
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Newer ASICs have different PSP footer sizes which lead to driver
failing to locate the DMCUB FW meta info, which in turn causes
improper DMCUB FW loading and causes DMCUB to crash.
Add support for custom PSP footer sizes and check 512B by default
as well.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
- After the addition of all OVT patches, DSC padding was being accounted
for multiple times, effectively doubling the padding
- This caused compliance failures or corruption
[HOW]
- Add padding to DSC pic width when required by HW, and do not re-add
when calculating reg values
- Do not add padding when computing PPS values, and instead track padding
separately to add when calculating slice width values
Reviewed-by: Chris Park <chris.park@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Relja Vojvodic <rvojvodi@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
The existing CFLAGS_ lines were pointing to a wrong location
for dml21_wrapper.c and were thereby ineffective. This means
dml21_wrapper.c is not an FPU compilation unit. Remove the
(erroneous) CFLAGS_ entries.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
This function is an FPU compilation unit. Therefore it's not
allowed to call DC_FP_START/END functions. It currently does
so and we'll need to move those functions out. Therefore
rename the existing compilation unit so we can introduce a
non-FPU dml2_wrapper.c.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
There is already a switch/case looking at link->link_id.id.
[How]
Move the case of `CONNECTOR_ID_PCIE` into switch case.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Some OLED panels require driver to write Aux BL before link training or
turning on backlight; otherwise monitor brightness will change.
[HOW]
Write the default Vesa Aux backlight control in dmub.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Derek Lai <Derek.Lai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This error message was emitted without a newline during bring-up on
FreeBSD. Presumably the error doesn't occur on Linux so was not noticed
before.
Signed-off-by: Ed Maste <emaste@FreeBSD.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During migration from VRAM to RAM, when PTE is cleared, reset
the PTE to always ensure that PTE.P=1 is set on GFX 12.1. If
PTE.P is not set, it can lead to TF faults.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On GFX 12.1, PDE.C is ignored if (PDE|PTE)_REQUEST_PHYSICAL
is not setup in the GCVM control register. Always set this
field to enable PDE.C usage.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On GFX12.1, default PTE setup needs an additional bit to be
set. Add PTE initialization flags to handle setup default PTE
on a per-ASIC basis.
While at it, fixup the coding style too.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add header files for osssys v7_1_0 register offsets
and shift masks
v2: Update osssys v7_1_0 ip headers to the latest version
v3: Clean up registers (Alex)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MMIO_REMAP (HDP flush page) exposes a hardware MMIO register window via
a PCI BAR; there are no struct pages backing it (not normal RAM). But
when one device shares memory with another through dma-buf, the receiver
still expects a delivery route—a list of DMA-able chunks—called an
sg_table. For the BAR window, we can’t (no pages!), so we instead create
a one-entry list that points directly to the BAR’s physical bus address
and tell DMA: “use this I/O span.” - A single, contiguous byte range on
the PCI bus (start DMA address + length)). That’s why we map it with
dma_map_resource() and set sg_set_page(..., NULL, ...). Perform DMA
reads/writes directly to that range so we build an sg_table from a BAR
physical span and map it with dma_map_resource().
This patch centralizes the BAR-I/O mapping in TTM and wires dma-buf to
it:
Add amdgpu_ttm_mmio_remap_alloc_sgt() /
amdgpu_ttm_mmio_remap_free_sgt(). They walk the TTM resource via
amdgpu_res_cursor, add the byte offset to adev->rmmio_remap.bus_addr,
build a one-entry sg_table with sg_set_page(NULL, …), and map/unmap it
with dma_map_resource().
In dma-buf map/unmap, if the BO is in AMDGPU_PL_MMIO_REMAP, call the new
helpers.
Single place for BAR-I/O handling: amdgpu_ttm.c in
amdgpu_ttm_mmio_remap_alloc_sgt() and ..._free_sgt().
No struct pages: sg_set_page(sg, NULL, cur.size, 0); inside
amdgpu_ttm_mmio_remap_alloc_sgt().
Minimal sg_table: sg_alloc_table(*sgt, 1, GFP_KERNEL); inside
amdgpu_ttm_mmio_remap_alloc_sgt().
Hooked into dma-buf: amdgpu_dma_buf_map()/unmap() in amdgpu_dma_buf.c
call these helpers for AMDGPU_PL_MMIO_REMAP.
v2: squash in fix for set/get tiling
Suggested-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MMIO_REMAP (HDP flush page) is a hardware I/O window exposed via a PCI
BAR. It must not migrate or be evicted.
Allocate a single 4 KB GEM BO in AMDGPU_GEM_DOMAIN_MMIO_REMAP during TTM
initialization when the hardware exposes a remap bus address and the
host page size is <= 4 KiB. Reserve the BO and pin it at the TTM level
so it remains fixed for its lifetime. No CPU mapping is established
here.
On teardown, reserve, unpin, and free the BO if present.
This prepares the object to be shared (e.g., via dma-buf) without
triggering placement changes or no CPU-access migration
v2: Added extra NULL checks
Suggested-by: Christian König <christian.koenig@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
