Although most of the code in this file is display-related (watermarks),
there's some functions that are not (e.g., clock gating). Thus we need
to do the conversions to DISPLAY_VER() manually here rather than using
Coccinelle.
In the near-future we'll probably want to think about moving watermark
logic out of intel_pm.c and into watermark-specific files under the
display/ directory.
v2:
- Use new IS_DISPLAY_VER macro where appropriate.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-5-matthew.d.roper@intel.com
Use Coccinelle to convert most of the usage of INTEL_GEN() and IS_GEN()
in the display code to use DISPLAY_VER() comparisons instead. The
following semantic patch was used:
@@ expression dev_priv, E; @@
- INTEL_GEN(dev_priv) == E
+ IS_DISPLAY_VER(dev_priv, E)
@@ expression dev_priv; @@
- INTEL_GEN(dev_priv)
+ DISPLAY_VER(dev_priv)
@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ IS_DISPLAY_VER(dev_priv, E)
@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_DISPLAY_RANGE(dev_priv, from, until)
There are still some display-related uses of INTEL_GEN() in intel_pm.c
(watermark code) and i915_irq.c. Those will be updated separately.
v2:
- Use new IS_DISPLAY_RANGE and IS_DISPLAY_VER helpers. (Jani)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-4-matthew.d.roper@intel.com
Although we've long referred to platforms by a single "GEN" number, the
hardware teams have recommended that we stop doing this since the
various component IP blocks are going to start using independent number
schemes with varying cadence. To support this, hardware platforms a bit
down the road are going to start providing MMIO registers that the
driver can read to obtain the "graphics version," "media version," and
"display version" without needing to do a PCI ID -> platform -> version
translation.
Although our current platforms don't yet expose these registers (and the
next couple we release probably won't have them yet either), the
hardware teams would still like to see us move to this independent
numbering scheme now in preparation. For i915 that means we should try
to eliminate all usage of INTEL_GEN() throughout our code and instead
replace it with separate GRAPHICS_VER(), MEDIA_VER(), and DISPLAY_VER()
constructs in the code. For old platforms, these will all usually give
the same value for each IP block (aside from a few special cases like
GLK which we can no more accurately represent as graphics=9 +
display=10), but future platforms will have more flexibility to bump IP
version numbers independently.
The upcoming ADL-P platform will have a display version of 13 and a
graphics version of 12, so let's just the first step of breaking out
DISPLAY_VER(), but leaving the rest of INTEL_GEN() untouched for now.
For now we'll automatically derive the display version from the
platform's INTEL_GEN() value except in cases where an alternative
display version is explicitly provided in the device info structure.
We also add some helper macros IS_DISPLAY_VER(i915, ver) and
IS_DISPLAY_RANGE(i915, from, until) that match the behavior of the
existing gen-based macros. However unlike IS_GEN(), we will implement
those macros with direct comparisons rather than trying to maintain a
mask to help compiler optimization. In practice the optimization winds
up not being used in very many places (since the vast majority of our
platform checks are of the form "gen >= x") so there is pretty minimal
size reduction in the final driver binary[1]. We're also likely going
to need to extend these version numbers to non-integer major.minor
values at some point in the future, so the mask approach won't work at
all once we get to platforms like that.
[1] The results before/after the next patch in this series, which
switches our code over to the new display macros:
$ size i915.ko.{orig,new}
text data bss dec hex filename
2940291 102944 5384 3048619 2e84ab i915.ko.orig
2940723 102956 5384 3049063 2e8667 i915.ko.new
v2:
- Move version into device info's display sub-struct. (Jani)
- Add extra parentheses to macros. (Jani)
- Note the lack of genmask optimization in the display-based macros and
give size data. (Lucas)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-3-matthew.d.roper@intel.com
ILK is the only platform that we consider "gen5" and SNB is the only
platform we consider "gen6." Add an IS_SANDYBRIDGE() macro and then
replace numeric platform tests for these two generations with direct
platform tests with the following Coccinelle semantic patch:
@@ expression dev_priv; @@
- IS_GEN(dev_priv, 5)
+ IS_IRONLAKE(dev_priv)
@@ expression dev_priv; @@
- IS_GEN(dev_priv, 6)
+ IS_SANDYBRIDGE(dev_priv)
@@ expression dev_priv; @@
- IS_GEN_RANGE(dev_priv, 5, 6)
+ IS_IRONLAKE(dev_priv) || IS_SANDYBRIDGE(dev_priv)
This will simplify our upcoming patches which eliminate INTEL_GEN()
usage in the display code.
v2:
- Reverse ilk/snb order for IS_GEN_RANGE conversion. (Ville)
- Rebase + regenerate from semantic patch
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-2-matthew.d.roper@intel.com
The enabled_planes bitmask was supposed to track logically enabled
planes (ie. fb!=NULL and crtc!=NULL), but instead we end up putting
even disabled planes into the bitmask since
intel_plane_atomic_check_with_state() only takes the early exit
if the plane was disabled and stays disabled. I think I misread
the early said codepath to exit whenever the plane is logically
disabled, which is not true.
So let's fix this up properly and set the bit only when the plane
actually is logically enabled.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Fixes: ee42ec19ca ("drm/i915: Track logically enabled planes for hw state")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
The spec requires to use at least 3.2ms for the AUX timeout period if
there are LT-tunable PHY Repeaters on the link (2.11.2). An upcoming
spec update makes this more specific, by requiring a 3.2ms minimum
timeout period for the LTTPR detection reading the 0xF0000-0xF0007
range (3.6.5.1).
Accordingly disable LTTPR detection until GLK, where the maximum timeout
we can set is only 1.6ms.
Link training in the non-transparent mode is known to fail at least on
some SKL systems with a WD19 dock on the link, which exposes an LTTPR
(see the References below). While this could have different reasons
besides the too short AUX timeout used, not detecting LTTPRs (and so not
using the non-transparent LT mode) fixes link training on these systems.
While at it add a code comment about the platform specific maximum
timeout values.
v2: Add a comment about the g4x maximum timeout as well. (Ville)
Reported-by: Takashi Iwai <tiwai@suse.de>
Reported-and-tested-by: Santiago Zarate <santiago.zarate@suse.com>
Reported-and-tested-by: Bodo Graumann <mail@bodograumann.de>
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3166
Fixes: b30edfd8d0 ("drm/i915: Switch to LTTPR non-transparent mode link training")
Cc: <stable@vger.kernel.org> # v5.11
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210317184901.4029798-2-imre.deak@intel.com
Start using struct intel_bios_encoder_data directly. We'll start
sanitizing the child device data directly as well, instead of the cached
data in ddi_port_info[]. The one downside here is having to store a
non-const pointer back to intel_bios_encoder_data.
Eventually we'll be able to have a direct pointer from encoder to
intel_bios_encoder_data, removing the need to go through the
ddi_port_info[] array altogether. And we'll be able to remove all the
cached data in ddi_port_info[].
v2:
- Remove supports_dp and supports_edp from ddi_port_info too
- Add devdata != NULL check in intel_bios_is_port_edp()
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> # v1
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/061df32a012ff640060920fcd730fb23f8717ee8.1615998927.git.jani.nikula@intel.com
There are two main cases where the default outputs are useful when the
VBT is missing:
- There are some DDI-platform Chromebooks out there that do not have a
VBT, which worked by coincidence because of the default outputs. The
machines need to continue to work.
- Early platform enabling when the VBT might not be available. (This
could be circumvented by using the i915.vbt_firmware parameter.)
Prepare for generating fake child devices for the default outputs by
limiting the number of outputs. We don't want to generate excessive
amounts of fake child devices. This could be perhaps be limited even
more in the future, but match what's possible on all DDI platforms.
Note that limiting the defaults to non-TypeC ports in commit
828ccb31cf ("drm/i915/icl: Add TypeC ports only if VBT is present") is
a more strict limit, and makes this a no-op on recent platforms.
v2: Rewrote commit message
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5c9c9743af1c7265a2c976d582b7a6685ec0c414.1615998927.git.jani.nikula@intel.com
SAMPLE_OA parameter enables sampling of OA buffer and results in a call
to init the OA buffer which initializes the OA unit head/tail pointers.
The OA_EXPONENT parameter controls the periodicity of the OA reports in
the OA buffer and results in starting a hrtimer.
Before gen12, all use cases required the use of the OA buffer and i915
enforced this setting when vetting out the parameters passed. In these
platforms the hrtimer was enabled if OA_EXPONENT was passed. This worked
fine since it was implied that SAMPLE_OA is always passed.
With gen12, this changed. Users can use perf without enabling the OA
buffer as in OAR use cases. While an OAR use case should ideally not
start the hrtimer, we see that passing an OA_EXPONENT parameter will
start the hrtimer even though SAMPLE_OA is not specified. This results
in an uninitialized OA buffer, so the head/tail pointers used to track
the buffer are zero.
This itself does not fail, but if we ran a use-case that SAMPLED the OA
buffer previously, then the OA_TAIL register is still pointing to an old
value. When the timer callback runs, it ends up calculating a
wrong/large number of available reports. Since we do a spinlock_irq_save
and start processing a large number of reports, NMI watchdog fires and
causes a crash.
Start the timer only if SAMPLE_OA is specified.
v2:
- Drop SAMPLE OA check when appending samples (Ashutosh)
- Prevent read if OA buffer is not being sampled
Fixes: 00a7f0d715 ("drm/i915/tgl: Add perf support on TGL")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210305210947.58751-1-umesh.nerlige.ramappa@intel.com
Say we have two planes enabled with watermarks configured
as follows:
plane A: wm0=enabled/can_sagv=false, wm1=enabled/can_sagv=true
plane B: wm0=enabled/can_sagv=true, wm1=disabled
This is possible since the latency we use to calculate
can_sagv may not be the same for both planes due to
skl_needs_memory_bw_wa().
In this case skl_crtc_can_enable_sagv() will see that
both planes have enabled at least one watermark level
with can_sagv==true, and thus proceeds to allow SAGV.
However, since plane B does not have wm1 enabled
plane A can't actually use it either. Thus we are
now running with SAGV enabled, but plane A can't
actually tolerate the extra latency it imposes.
To remedy this only allow SAGV on if the highest common
enabled watermark level for all active planes can tolerate
the extra SAGV latency.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
On HSW/BDW with VT-d active the first tile row scanned out
after the first async flip of the frame often ends up corrupted.
Whether the corruption happens or not depends on the scanline
on which the async flip happens, but the behaviour seems very
consistent. Ie. the same set of scanlines (which are most scanlines)
always show the corruption. And another set of scanlines (far less
of them) never shows the corruption.
I discovered that disabling the fetch-stride stretching
feature cures the corruption. This is some kind of TLB related
prefetch thing AFAIK. We already disable it on SNB primary
planes due to a documented workaround. The hardware folks
indicated that disabling this should be fine, so let's go
with that.
And while we're here, let's document the relevant bits on all
pre-skl platforms.
Fixes: 2a636e240c ("drm/i915: Implement async flip for ivb/hsw")
Fixes: cda195f13a ("drm/i915: Implement async flips for bdw")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210220103303.3448-1-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>
