If we use two events with the same filter and related event type
(see the following example), the driver check whether they are related
events and are in the same group, otherwise the function
hisi_pcie_pmu_find_related_event() return -EINVAL, then the 2nd event
cannot count but the 1st event is running, although the PCIe PMU has
other idle counters.
In this case, The perf event scheduler will make the two events to
multiplex a counter, if the user use the formula
(1st event_value / 2nd event_value) to calculate the bandwidth, he/she
won't get the correct value, because they are not counting at the
same period.
This patch tries to fix this by making the related events to use
different idle counters if they are not in the same event group.
And finally, I'm going to say. The related events are best used in the
same group [1]. There are two ways to know if they are related events.
a) By event name, such as the latency events "xxx_latency, xxx_cnt" or
bandwidth events "xxx_flux, xxx_time".
b) By event type, such as "event=0xXXXX, event=0x1XXXX".
Use group to count the related events:
[1] -e "{pmu_name/xxx_latency,port=1/,pmu_name/xxx_cnt,port=1/}"
example:
1st event: hisi_pcie0_core1/event=0x804,port=1
2nd event: hisi_pcie0_core1/event=0x10804,port=1
test cmd:
perf stat -e hisi_pcie0_core1/event=0x804,port=1/ \
-e hisi_pcie0_core1/event=0x10804,port=1/
before patch:
25,281 hisi_pcie0_core1/event=0x804,port=1/ (49.91%)
470,598 hisi_pcie0_core1/event=0x10804,port=1/ (50.09%)
after patch:
24,147 hisi_pcie0_core1/event=0x804,port=1/
474,558 hisi_pcie0_core1/event=0x10804,port=1/
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huwei.com>
Link: https://lore.kernel.org/r/20240223103359.18669-7-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
The PMU can monitor traffic of certain target Root Port or downstream
target Endpoint. User can specify the target filter by the "port" or
"bdf" option respectively. The PMU can only monitor the Root Port or
Endpoint on the same PCIe core so the value of "port" or "bdf" should
be valid and will be checked by the driver.
Currently at least and only one of "port" and "bdf" option must be set.
If "port" filter is not set or is set explicitly to zero (default),
driver will regard the user specifies a "bdf" option since "port" option
is a bitmask of the target Root Ports and zero is not a valid
value.
If user not explicitly set "port" or "bdf" filter, the driver uses "bdf"
default value (zero) to set target filter, but driver will skip the
check of bdf=0, although it's a valid value (meaning 0000:000:00.0).
Then the user just gets zero.
Therefore, we need to check if both "port" and "bdf" are invalid, then
return failure and report warning.
Testing:
before the patch:
0 hisi_pcie0_core1/rx_mrd_flux/
0 hisi_pcie0_core1/rx_mrd_flux,port=0/
24,124 hisi_pcie0_core1/rx_mrd_flux,port=1/
0 hisi_pcie0_core1/rx_mrd_flux,bdf=0/
0 hisi_pcie0_core1/rx_mrd_flux,port=0x800/
<not supported> hisi_pcie0_core1/rx_mrd_flux,bdf=1/
24,132 hisi_pcie0_core1/rx_mrd_flux,bdf=0x1700/
<not supported> hisi_pcie0_core1/rx_mrd_flux,port=0x0,bdf=0x0/
<not supported> hisi_pcie0_core1/rx_mrd_flux,port=0x0,bdf=0x1/
24,138 hisi_pcie0_core1/rx_mrd_flux,port=0x0,bdf=0x1700/
24,126 hisi_pcie0_core1/rx_mrd_flux,port=0x1,bdf=0x0/
after the patch:
<not supported> hisi_pcie0_core1/rx_mrd_flux/
<not supported> hisi_pcie0_core1/rx_mrd_flux,port=0/
24,153 hisi_pcie0_core1/rx_mrd_flux,port=1/
0 hisi_pcie0_core1/rx_mrd_flux,port=0x800/
<not supported> hisi_pcie0_core1/rx_mrd_flux,bdf=0/
<not supported> hisi_pcie0_core1/rx_mrd_flux,bdf=1/
24,117 hisi_pcie0_core1/rx_mrd_flux,bdf=0x1700/
<not supported> hisi_pcie0_core1/rx_mrd_flux,port=0x0,bdf=0x0/
<not supported> hisi_pcie0_core1/rx_mrd_flux,port=0x0,bdf=0x1/
24,120 hisi_pcie0_core1/rx_mrd_flux,port=0x0,bdf=0x1700/
24,123 hisi_pcie0_core1/rx_mrd_flux,port=0x1,bdf=0x0/
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240223103359.18669-6-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
The metric counting shows incorrect results if the events in the
metric group using the same event but different filter options.
This is because we only judge the event code to decide whether
the event in the metric group should share the same hardware
counter, but ignore the settings of the filter.
For example, on a platform of 2 ports 0x1 and 0x2 but only port
0x1 has a downstream PCIe NVME device. The metric counting
shows both ports have the same counts because we misassign these
two events to one same hardware counter:
[root@localhost perf-iostat]# ./perf stat -e '{hisi_pcie0_core1/event=0x0104,port=0x2/,hisi_pcie0_core1/event=0x0104,port=0x1/}'
Performance counter stats for 'system wide':
7907484924 hisi_pcie0_core1/event=0x0104,port=0x2/
7907484924 hisi_pcie0_core1/event=0x0104,port=0x1/
10.153863691 seconds time elapsed
Fix this by using the whole config rather than the event only
to judge whether two events are the same and should share the
same hardware counter. With this patch, the metric counting in
the above case tends to be corrected:
[root@localhost perf-iostat]# ./perf stat -e '{hisi_pcie0_core1/event=0x0104,port=0x2/,hisi_pcie0_core1/event=0x0104,port=0x1/}'
Performance counter stats for 'system wide':
0 hisi_pcie0_core1/event=0x0104,port=0x2/
8123122077 hisi_pcie0_core1/event=0x0104,port=0x1/
10.152875631 seconds time elapsed
Fixes: 8404b0fbc7 ("drivers/perf: hisi: Add driver for HiSilicon PCIe PMU")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240223103359.18669-4-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
HiSilicon UC PMU v2 suffers the erratum 162700402 that the PMU counter
cannot be set due to the lack of clock under power saving mode. This will
lead to error or inaccurate counts. The clock can be enabled by the PMU
global enabling control.
This patch tries to fix this by set the UC PMU enable before set event
period to turn on the clock, and then restore the UC PMU configuration.
The counter register can hold its value without a clock.
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240227125231.53127-1-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
The debugfs pretty-printer was written for the CMN-600 assumptions of a
maximum 8x8 mesh, but CMN-700 now allows coordinates and ID values up to
12 and 128 respectively, which can overflow the format strings, mess up
the alignment of the table and hurt overall readability. This table does
prove useful for double-checking that the driver is picking up the
topology of new systems correctly and for verifying user expectations,
so tweak the formatting to stay nice and readable with wider values.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1d1517eadd1bac5992fab679c9dc531b381944da.1702484646.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/75dda01b2ad6e17f726830094bd38cb8faab5cbe.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/7be677dfa13d3a7eab6eef0d808ba8a9855d14ae.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/a2587688c54834482d68fe2a44f415a649ad6477.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/055656e474208b0fb583e249530fa211fa3be57c.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/79f48409f663f0184f03d34c6a86359ea3aa1291.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert these drivers from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/33a8be0641b9447469fb7f6af0a10fb65efa97a3.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/bd12035ca467d7f4cd5edcfd6febda56600caacd.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/c5b76bf352385d8ef6211ee8c43352c74eee064d.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/abfedc224eca7f4960b7ddfb6daedd47a3699ca5.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/23bfd1a73ce819ffce6137c237608684a3cdfda6.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/1eda5e216afcb0e26a50e9be112d4514ffd0844a.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20cc24ede88f5e000991dfe6f4cf1222b819e337.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/9ff5a467569dd51b2fc44e11594ad5db7ea15f57.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/8698ca612e17292f8a8bbb2d1c0f6be4b2053da7.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/1cae5f0c4693333c91d28a09388bdb8bfcc25d0b.1702648124.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/70b581d58cfffdccb9fb3ed17bf3220c00f8033f.1702648124.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/33dbadf246eb323edd9e09ac744111216c167a55.1702648124.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/e6dd47f791ddcc4cc6f7a80efcede245528220e6.1702648124.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
Pull ext4 fixes from Ted Ts'o:
"Miscellaneous bug fixes and cleanups in ext4's multi-block allocator
and extent handling code"
* tag 'for-linus-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
ext4: make ext4_set_iomap() recognize IOMAP_DELALLOC map type
ext4: make ext4_map_blocks() distinguish delalloc only extent
ext4: add a hole extent entry in cache after punch
ext4: correct the hole length returned by ext4_map_blocks()
ext4: convert to exclusive lock while inserting delalloc extents
ext4: refactor ext4_da_map_blocks()
ext4: remove 'needed' in trace_ext4_discard_preallocations
ext4: remove unnecessary parameter "needed" in ext4_discard_preallocations
ext4: remove unused return value of ext4_mb_release_group_pa
ext4: remove unused return value of ext4_mb_release_inode_pa
ext4: remove unused return value of ext4_mb_release
ext4: remove unused ext4_allocation_context::ac_groups_considered
ext4: remove unneeded return value of ext4_mb_release_context
ext4: remove unused parameter ngroup in ext4_mb_choose_next_group_*()
ext4: remove unused return value of __mb_check_buddy
ext4: mark the group block bitmap as corrupted before reporting an error
ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal()
ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found()
ext4: avoid dividing by 0 in mb_update_avg_fragment_size() when block bitmap corrupt
ext4: avoid bb_free and bb_fragments inconsistency in mb_free_blocks()
...
Pull smb client fixes from Steve French:
"Five smb3 client fixes, mostly multichannel related:
- four multichannel fixes including fix for channel allocation when
multiple inactive channels, fix for unneeded race in channel
deallocation, correct redundant channel scaling, and redundant
multichannel disabling scenarios
- add warning if max compound requests reached"
* tag 'v6.8-rc3-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: increase number of PDUs allowed in a compound request
cifs: failure to add channel on iface should bump up weight
cifs: do not search for channel if server is terminating
cifs: avoid redundant calls to disable multichannel
cifs: make sure that channel scaling is done only once
Pull xfs fixes from Chandan Babu:
- Clear XFS_ATTR_INCOMPLETE filter on removing xattr from a node format
attribute fork
- Remove conditional compilation of realtime geometry validator
functions to prevent confusing error messages from being printed on
the console during the mount operation
* tag 'xfs-6.8-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: remove conditional building of rt geometry validator functions
xfs: reset XFS_ATTR_INCOMPLETE filter on node removal
Pull char/misc driver fixes from Greg KH:
"Here are three tiny driver fixes for 6.8-rc3. They include:
- Android binder long-term bug with epoll finally being fixed
- fastrpc driver shutdown bugfix
- open-dice lockdep fix
All of these have been in linux-next this week with no reported
issues"
* tag 'char-misc-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
binder: signal epoll threads of self-work
misc: open-dice: Fix spurious lockdep warning
misc: fastrpc: Mark all sessions as invalid in cb_remove
Pull tty and serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.8-rc3 that
resolve a number of reported issues. Included in here are:
- rs485 flag definition fix that affected the user/kernel abi in -rc1
- max310x driver fixes
- 8250_pci1xxxx driver off-by-one fix
- uart_tiocmget locking race fix
All of these have been in linux-next for over a week with no reported
issues"
* tag 'tty-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: max310x: prevent infinite while() loop in port startup
serial: max310x: fail probe if clock crystal is unstable
serial: max310x: improve crystal stable clock detection
serial: max310x: set default value when reading clock ready bit
serial: core: Fix atomicity violation in uart_tiocmget
serial: 8250_pci1xxxx: fix off by one in pci1xxxx_process_read_data()
tty: serial: Fix bit order in RS485 flag definitions
Pull USB driver fixes from Greg KH:
"Here are a bunch of small USB driver fixes for 6.8-rc3. Included in
here are:
- new usb-serial driver ids
- new dwc3 driver id added
- typec driver change revert
- ncm gadget driver endian bugfix
- xhci bugfixes for a number of reported issues
- usb hub bugfix for alternate settings
- ulpi driver debugfs memory leak fix
- chipidea driver bugfix
- usb gadget driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
USB: serial: option: add Fibocom FM101-GL variant
USB: serial: qcserial: add new usb-id for Dell Wireless DW5826e
USB: serial: cp210x: add ID for IMST iM871A-USB
usb: typec: tcpm: fix the PD disabled case
usb: ucsi_acpi: Quirk to ack a connector change ack cmd
usb: ucsi_acpi: Fix command completion handling
usb: ucsi: Add missing ppm_lock
usb: ulpi: Fix debugfs directory leak
Revert "usb: typec: tcpm: fix cc role at port reset"
usb: gadget: pch_udc: fix an Excess kernel-doc warning
usb: f_mass_storage: forbid async queue when shutdown happen
USB: hub: check for alternate port before enabling A_ALT_HNP_SUPPORT
usb: chipidea: core: handle power lost in workqueue
usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspend
usb: dwc3: pci: add support for the Intel Arrow Lake-H
usb: core: Prevent null pointer dereference in update_port_device_state
xhci: handle isoc Babble and Buffer Overrun events properly
xhci: process isoc TD properly when there was a transaction error mid TD.
xhci: fix off by one check when adding a secondary interrupter.
xhci: fix possible null pointer dereference at secondary interrupter removal
...
Pull i2c fixlet from Wolfram Sang:
"MAINTAINERS update to point people to the new tree for i2c host driver
changes"
* tag 'i2c-for-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Update i2c host drivers repository
Pull dmaengine fixes from Vinod Koul:
"Core:
- fix return value of is_slave_direction() for D2D dma
Driver fixes for:
- Documentaion fixes to resolve warnings for at_hdmac driver
- bunch of fsl driver fixes for memory leaks, and useless kfree
- TI edma and k3 fixes for packet error and null pointer checks"
* tag 'dmaengine-fix-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: at_hdmac: add missing kernel-doc style description
dmaengine: fix is_slave_direction() return false when DMA_DEV_TO_DEV
dmaengine: fsl-qdma: Remove a useless devm_kfree()
dmaengine: fsl-qdma: Fix a memory leak related to the queue command DMA
dmaengine: fsl-qdma: Fix a memory leak related to the status queue DMA
dmaengine: ti: k3-udma: Report short packet errors
dmaengine: ti: edma: Add some null pointer checks to the edma_probe
dmaengine: fsl-dpaa2-qdma: Fix the size of dma pools
dmaengine: at_hdmac: fix some kernel-doc warnings
Pull perf tools fixes from Arnaldo Carvalho de Melo:
"Vendor events:
- Intel Alderlake/Sapphire Rapids metric fixes, the CPU type
("cpu_atom", "cpu_core") needs to be used as a prefix to be
considered on a metric formula, detected via one of the 'perf test'
entries.
'perf test' fixes:
- Fix the creation of event selector lists on 'perf test' entries, by
initializing the sample ID flag, which is done by 'perf record', so
this fix affects only the tests, the common case isn't affected
- Make 'perf list' respect debug settings (-v) to fix its 'perf test'
entry
- Fix 'perf script' test when python support isn't enabled
- Special case 'perf script' tests on s390, where only DWARF call
graphs are supported and only on software events
- Make 'perf daemon' signal test less racy
Compiler warnings/errors:
- Remove needless malloc(0) call in 'perf top' that triggers
-Walloc-size
- Fix calloc() argument order to address error introduced in gcc-14
Build:
- Make minimal shellcheck version to v0.6.0, avoiding the build to
fail with older versions
Sync kernel header copies:
- stat.h to pick STATX_MNT_ID_UNIQUE
- msr-index.h to pick IA32_MKTME_KEYID_PARTITIONING
- drm.h to pick DRM_IOCTL_MODE_CLOSEFB
- unistd.h to pick {list,stat}mount,
lsm_{[gs]et_self_attr,list_modules} syscall numbers
- x86 cpufeatures to pick TDX, Zen, APIC MSR fence changes
- x86's mem{cpy,set}_64.S used in 'perf bench'
- Also, without tooling effects: asm-generic/unaligned.h, mount.h,
fcntl.h, kvm headers"
* tag 'perf-tools-fixes-for-v6.8-1-2024-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (21 commits)
perf tools headers: update the asm-generic/unaligned.h copy with the kernel sources
tools include UAPI: Sync linux/mount.h copy with the kernel sources
perf evlist: Fix evlist__new_default() for > 1 core PMU
tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
tools headers x86 cpufeatures: Sync with the kernel sources to pick TDX, Zen, APIC MSR fence changes
tools headers UAPI: Sync unistd.h to pick {list,stat}mount, lsm_{[gs]et_self_attr,list_modules} syscall numbers
perf vendor events intel: Alderlake/sapphirerapids metric fixes
tools headers UAPI: Sync kvm headers with the kernel sources
perf tools: Fix calloc() arguments to address error introduced in gcc-14
perf top: Remove needless malloc(0) call that triggers -Walloc-size
perf build: Make minimal shellcheck version to v0.6.0
tools headers UAPI: Update tools's copy of drm.h headers to pick DRM_IOCTL_MODE_CLOSEFB
perf test shell daemon: Make signal test less racy
perf test shell script: Fix test for python being disabled
perf test: Workaround debug output in list test
perf list: Add output file option
perf list: Switch error message to pr_err() to respect debug settings (-v)
perf test: Fix 'perf script' tests on s390
tools headers UAPI: Sync linux/fcntl.h with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources to pick IA32_MKTME_KEYID_PARTITIONING
...
Pull tracing and eventfs fixes from Steven Rostedt:
- Fix the return code for ring_buffer_poll_wait()
It was returing a -EINVAL instead of EPOLLERR.
- Zero out the tracefs_inode so that all fields are initialized.
The ti->private could have had stale data, but instead of just
initializing it to NULL, clear out the entire structure when it is
allocated.
- Fix a crash in timerlat
The hrtimer was initialized at read and not open, but is canceled at
close. If the file was opened and never read the close will pass a
NULL pointer to hrtime_cancel().
- Rewrite of eventfs.
Linus wrote a patch series to remove the dentry references in the
eventfs_inode and to use ref counting and more of proper VFS
interfaces to make it work.
- Add warning to put_ei() if ei is not set to free. That means
something is about to free it when it shouldn't.
- Restructure the eventfs_inode to make it more compact, and remove the
unused llist field.
- Remove the fsnotify*() funtions for when the inodes were being
created in the lookup code. It doesn't make sense to notify about
creation just because something is being looked up.
- The inode hard link count was not accurate.
It was being updated when a file was looked up. The inodes of
directories were updating their parent inode hard link count every
time the inode was created. That means if memory reclaim cleaned a
stale directory inode and the inode was lookup up again, it would
increment the parent inode again as well. Al Viro said to just have
all eventfs directories have a hard link count of 1. That tells user
space not to trust it.
* tag 'trace-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Keep all directory links at 1
eventfs: Remove fsnotify*() functions from lookup()
eventfs: Restructure eventfs_inode structure to be more condensed
eventfs: Warn if an eventfs_inode is freed without is_freed being set
tracing/timerlat: Move hrtimer_init to timerlat_fd open()
eventfs: Get rid of dentry pointers without refcounts
eventfs: Clean up dentry ops and add revalidate function
eventfs: Remove unused d_parent pointer field
tracefs: dentry lookup crapectomy
tracefs: Avoid using the ei->dentry pointer unnecessarily
eventfs: Initialize the tracefs inode properly
tracefs: Zero out the tracefs_inode when allocating it
ring-buffer: Clean ring_buffer_poll_wait() error return
Pull gfs2 revert from Andreas Gruenbacher:
"It turns out that the commit to use GL_NOBLOCK flag for non-blocking
lookups has several issues, and not all of them have a simple fix"
* tag 'gfs2-v6.8-rc2-revert' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
Revert "gfs2: Use GL_NOBLOCK flag for non-blocking lookups"
Pull pci fixes from Bjorn Helgaas:
- Fix a potential deadlock that was reintroduced by an ASPM revert
merged for v6.8 (Johan Hovold)
- Add Manivannan Sadhasivam as PCI Endpoint maintainer (Lorenzo
Pieralisi)
* tag 'pci-v6.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
MAINTAINERS: Add Manivannan Sadhasivam as PCI Endpoint maintainer
PCI/ASPM: Fix deadlock when enabling ASPM
Pul drm fixes from Dave Airlie:
"Regular weekly fixes, mostly amdgpu and xe. One nouveau fix is a
better fix for the deadlock and also helps with a sync race we were
seeing.
dma-buf:
- heaps CMA page accounting fix
virtio-gpu:
- fix segment size
xe:
- A crash fix
- A fix for an assert due to missing mem_acces ref
- Only allow a single user-fence per exec / bind.
- Some sparse warning fixes
- Two fixes for compilation failures on various odd combinations of
gcc / arch pointed out on LKML.
- Fix a fragile partial allocation pointed out on LKML.
- A sysfs ABI documentation warning fix
amdgpu:
- Fix reboot issue seen on some 7000 series dGPUs
- Fix client init order for KFD
- Misc display fixes
- USB-C fix
- DCN 3.5 fixes
- Fix issues with GPU scheduler and GPU reset
- GPU firmware loading fix
- Misc fixes
- GC 11.5 fix
- VCN 4.0.5 fix
- IH overflow fix
amdkfd:
- SVM fixes
- Trap handler fix
- Fix device permission lookup
- Properly reserve BO before validating it
nouveau:
- fence/irq lock deadlock fix (second attempt)
- gsp command size fix
* tag 'drm-fixes-2024-02-03' of git://anongit.freedesktop.org/drm/drm: (35 commits)
nouveau: offload fence uevents work to workqueue
nouveau/gsp: use correct size for registry rpc.
drm/amdgpu/pm: Use inline function for IP version check
drm/hwmon: Fix abi doc warnings
drm/xe: Make all GuC ABI shift values unsigned
drm/xe/vm: Subclass userptr vmas
drm/xe: Use LRC prefix rather than CTX prefix in lrc desc defines
drm/xe: Don't use __user error pointers
drm/xe: Annotate mcr_[un]lock()
drm/xe: Only allow 1 ufence per exec / bind IOCTL
drm/xe: Grab mem_access when disabling C6 on skip_guc_pc platforms
drm/xe: Fix crash in trace_dma_fence_init()
drm/amdgpu: Reset IH OVERFLOW_CLEAR bit
drm/amdgpu: remove asymmetrical irq disabling in vcn 4.0.5 suspend
drm/amdgpu: drm/amdgpu: remove golden setting for gfx 11.5.0
drm/amdkfd: reserve the BO before validating it
drm/amdgpu: Fix missing error code in 'gmc_v6/7/8/9_0_hw_init()'
drm/amd/display: Fix buffer overflow in 'get_host_router_total_dp_tunnel_bw()'
drm/amd/display: Add NULL check for kzalloc in 'amdgpu_dm_atomic_commit_tail()'
drm/amd: Don't init MEC2 firmware when it fails to load
...
Pull input fixes from Dmitry Torokhov:
- a fix for the fix to deal with newer laptops which get confused by
the "GET ID" command when probing for PS/2 keyboards
- a couple of tweaks to i8042 to handle Clevo NS70PU and Lifebook U728
laptops
- a change to bcm5974 to validate that the device has appropriate
endpoints
- an addition of new product ID to xpad driver to recognize Lenovo
Legion Go controllers
- a quirk to Goodix controller to deal with extra GPIO described in
ACPI tables on some devices.
* tag 'input-for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - add Fujitsu Lifebook U728 to i8042 quirk table
Input: i8042 - fix strange behavior of touchpad on Clevo NS70PU
Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID
Input: atkbd - skip ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETID
Input: bcm5974 - check endpoint type before starting traffic
Input: xpad - add Lenovo Legion Go controllers
Input: goodix - accept ACPI resources with gpio_count == 3 && gpio_int_idx == 0
Pull sound fixes from Takashi Iwai:
"A collection of fixes, mostly device-specific ones:
- Minor PCM core fix for name strings
- ASoC Qualcomm fixes, including DAI support extensions
- ASoC AMD platform updates
- ASoC Allwinner platform updates
- Various ASoC codec fixes for WSA, WCD, ES8326 drivers
- Various HD-audio and USB-audio fixes and quirks
- A series of fixes for Cirrus CS35L56 codecs"
* tag 'sound-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (63 commits)
ALSA: usb-audio: Ignore clock selector errors for single connection
ALSA: hda/realtek: Enable headset mic on Vaio VJFE-ADL
ALSA: hda: cs35l56: Remove unused test stub function
ALSA: hda: cs35l56: Firmware file must match the version of preloaded firmware
ALSA: hda: cs35l56: Fix filename string field layout
ALSA: hda: cs35l56: Fix order of searching for firmware files
ASoC: cs35l56: Allow more time for firmware to boot
ASoC: cs35l56: Load tunings for the correct speaker models
ASoC: cs35l56: Firmware file must match the version of preloaded firmware
ASoC: cs35l56: Fix misuse of wm_adsp 'part' string for silicon revision
ASoC: cs35l56: Fix for initializing ASP1 mixer registers
ALSA: hda: cs35l56: Initialize all ASP1 registers
ASoC: cs35l56: Fix default SDW TX mixer registers
ASoC: cs35l56: Fix to ensure ASP1 registers match cache
ASoC: cs35l56: Remove buggy checks from cs35l56_is_fw_reload_needed()
ASoC: cs35l56: Don't add the same register patch multiple times
ASoC: cs35l56: cs35l56_component_remove() must clean up wm_adsp
ASoC: cs35l56: cs35l56_component_remove() must clear cs35l56->component
ASoC: wm_adsp: Don't overwrite fwf_name with the default
ASoC: wm_adsp: Fix firmware file search order
...
