mirrors/linux
2
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2026-05-10 06:49:29 -04:00
Code Issues Packages Projects Releases Wiki Activity
1,264,615 Commits 1 Branch 929 Tags
7c4b3191b3cdb01f69bb5c1323fe67e018e7b9f9
Commit Graph

1264615 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Raymond Hackley
7c4b3191b3 arm64: dts: qcom: msm8916/39-samsung-a2015: Add connector for MUIC 
Add subnode usb_con: extcon for SM5502 / SM5504 MUIC, which will be used
for RT5033 charger.

Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Link: https://lore.kernel.org/r/20240215122605.3817-1-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-21 12:12:09 -05:00
Jianhua Lu
0a8ab4a834 arm64: dts: qcom: sm8250-xiaomi-elish: set pm8150b_vbus regulator-min-microamp and regulator-max-microamp 
Fix the dtb check warnings:
  sm8250-xiaomi-elish-boe.dtb: usb-vbus-regulator@1100: 'regulator-min-microamp' is a required property
  sm8250-xiaomi-elish-boe.dtb: usb-vbus-regulator@1100: 'regulator-max-microamp' is a required property

Fixes: 6965278727 ("arm64: dts: qcom: sm8250-xiaomi-elish: Add pm8150b type-c node and enable usb otg")
Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240323100443.2478-1-lujianhua000@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-21 12:04:37 -05:00
Neil Armstrong
6aeeb94569 arm64: dts: qcom: sm8650: remove useless enablement of mdss_mdp 
The MDP/DPU device is not disabled by default, so there is not point in
enabling it in the board DTS file.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240325-topic-sm8x50-upstream-leave-mdss-enabled-by-default-v1-1-f1b380132075@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-21 12:04:29 -05:00
Krzysztof Kozlowski
6754fecd3b arm64: dts: qcom: sdx75: add unit address to soc node 
Soc node has ranges, thus it must have an unit address. This fixes W=1
dtc warning:

  sdx75.dtsi:399.11-736.4: Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240325102924.26820-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-21 12:03:58 -05:00
Luca Weiss
62f87a3cac arm64: dts: qcom: sm6350: Add DisplayPort controller 
Add the node for the DisplayPort controller found on the SM6350 SoC.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240329-sm6350-dp-v2-3-e46dceb32ef5@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-21 12:01:22 -05:00
Komal Bajaj
ac6d35b9b7 arm64: dts: qcom: qcs6490-rb3gen2: Enable various remoteprocs 
Enable the ADSP, CDSP and WPSS that are found on qcs6490-rb3gen2.

Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240417120928.32344-3-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-21 11:21:51 -05:00
Komal Bajaj
99a1c9eedf arm64: dts: qcom: qcm6490-idp: Enable various remoteprocs 
Enable the ADSP, CDSP, MPSS and WPSS that are found on the SoC.

Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Link: https://lore.kernel.org/r/20240417120928.32344-2-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-21 11:21:51 -05:00
Dmitry Baryshkov
d2dbb1047e arm64: dts: qcom: sc8180x-lenovo-flex-5g: add USB-C orientation GPIOs 
Define the USB-C orientation GPIOs so that the USB-C ports orientation
is known without having to resort to the altmode notifications.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240409-hdk-orientation-gpios-v2-5-658efd993987@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-20 13:00:20 -05:00
Dmitry Baryshkov
e34d83d968 arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13s: add USB-C orientation GPIOs 
Define the USB-C orientation GPIOs so that the USB-C ports orientation
is known without having to resort to the altmode notifications.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240409-hdk-orientation-gpios-v2-4-658efd993987@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-20 13:00:20 -05:00
Dmitry Baryshkov
70b47e7b76 arm64: dts: qcom: sm8450-hdk: add USB-C orientation GPIO 
Define the USB-C orientation GPIO so that the USB-C port orientation is
known without having to resort to the altmode notifications.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240409-hdk-orientation-gpios-v2-3-658efd993987@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-20 13:00:20 -05:00
Dmitry Baryshkov
defac2c098 arm64: dts: qcom: sm8350-hdk: add USB-C orientation GPIO 
Define the USB-C orientation GPIO so that the USB-C port orientation is
known without having to resort to the altmode notifications.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240409-hdk-orientation-gpios-v2-2-658efd993987@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-20 13:00:20 -05:00
Dmitry Baryshkov
254c101efd dt-bindings: soc: qcom: pmic-glink: allow orientation-gpios 
The orientation GPIOs are not limited to sm8450/sm8550/x1e8000
platforms. Allow corresponding property to be used on all Qualcom
platforms.

Fixes: 65682407f8 ("dt-bindings: soc: qcom: qcom,pmic-glink: add a gpio used to determine the Type-C port plug orientation")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240409-hdk-orientation-gpios-v2-1-658efd993987@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-20 13:00:20 -05:00
Luca Weiss
e788ef2bda arm64: dts: qcom: qcm6490-fairphone-fp5: Add USB-C orientation GPIO 
Define the USB-C orientation GPIOs so that the USB-C ports orientation
is known without having to resort to the altmode notifications.

On PCB level this is the signal from PM7250B (pin CC_OUT) which is
called USB_PHY_PS.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240411-fp5-usb-c-gpio-v1-1-78f11deb940a@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-20 12:59:38 -05:00
Umang Chheda
776c5f3c9c arm64: dts: qcom: qcm6490-idp: Name the regulators 
Without explicitly specifying names for the regulators they are named
based on the DeviceTree node name. This results in multiple regulators
with the same name, making it impossible to reason debug prints and
regulator_summary.

Signed-off-by: Umang Chheda <quic_uchheda@quicinc.com>
Link: https://lore.kernel.org/r/20240412123237.2633000-1-quic_uchheda@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-20 12:59:02 -05:00
Volodymyr Babchuk
5927bc586a arm64: dts: qcom: sa8155p-adp: lower min volt for L13C regulator 
Voltage regulator L13C is used by SD card IO interface. In order to
support UHS modes, IO interface voltage needs to be set to 1.8V. This
patch extends minimum voltage range of L13C regulator to allow this.

Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Fixes: 0deb2624e2 ("arm64: dts: qcom: sa8155p-adp: Add support for uSD card")
Suggested-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20240412190310.1647893-2-volodymyr_babchuk@epam.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-20 12:58:45 -05:00
Abel Vesa
78a4407ca8 arm64: dts: qcom: x1e80100-qcp: Add data-lanes and link-frequencies to DP3 
The data-lanes are a property of the out remote endpoint, so move them
from mdss_dp3 to the mdss_dp3_out. Also add the link-frequencies to
mdss_dp3_out and make sure to include all frequencies.

Fixes: f9a9c11471 ("arm64: dts: qcom: x1e80100-qcp: Enable more support")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240419-x1e80100-dts-fix-mdss-dp3-v2-3-10f4ed7a09b4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-20 11:46:34 -05:00
Abel Vesa
2351d20508 arm64: dts: qcom: x1e80100-crd: Add data-lanes and link-frequencies to DP3 
The data-lanes are a property of the out remote endpoint, so move them
from mdss_dp3 to the mdss_dp3_out. Also add the link-frequencies to
mdss_dp3_out and make sure to include all frequencies.

Fixes: d7e03cce04 ("arm64: dts: qcom: x1e80100-crd: Enable more support")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240419-x1e80100-dts-fix-mdss-dp3-v2-2-10f4ed7a09b4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-20 11:46:34 -05:00
Abel Vesa
8a2a43a978 arm64: dts: qcom: x1e80100: Drop the link-frequencies from mdss_dp3_in 
The link-frequencies belong in mdss_dp3_out. Drop them from mdss_dp3_in.

Fixes: 1940c25eaa ("arm64: dts: qcom: x1e80100: Add display nodes")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240419-x1e80100-dts-fix-mdss-dp3-v2-1-10f4ed7a09b4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-20 11:46:34 -05:00
Konrad Dybcio
39c596304e arm64: dts: qcom: Add SM8550 Xperia 1 V 
Add support for Sony Xperia 1 V, a.k.a PDX234. This device is a part
of the SoMC SM8550 Yodo platform.

This commit brings support for:
* Remoteprocs (sans modem for now)
* Flash LED (the notification LED is gone :((((()
* SD Card
* USB (*including SuperSpeed*) + PMIC_GLINK (it's funky, requires a replug
  with an cable flip sometimes..)
* Most regulators
* Part of I2C-connected peripherals (notably no touch due to a
driver bug)
* PCIe0 (PCIe1 is unused)

Do note display via simplefb is not supported, as the display is blanked
upon exiting XBL.

To create a working boot image, you need to run:
cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/sm8550-sony-xperia-\
yodo-pdx234.dtb > .Image.gz-dtb

mkbootimg \
--kernel .Image.gz-dtb \
--ramdisk some_initrd.img \
--pagesize 4096 \
--base 0x0 \
--kernel_offset 0x8000 \
--ramdisk_offset 0x1000000 \
--tags_offset 0x100 \
--cmdline "SOME_CMDLINE" \
--dtb_offset 0x1f00000 \
--header_version 2 \
-o boot.img-sony-xperia-pdx234

Then, you need to flash it on the device and get rid of all the
vendor_boot/dtbo mess:

// You have to either pull vbmeta{"","_system"} from
// /dev/block/bootdevice/by-name/ or build one as a part of AOSP build process
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta_system \
vbmeta_system.img

fastboot flash boot boot.img-sony-xperia-pdx234
fastboot erase vendor_boot
fastboot erase recovery
fastboot flash dtbo emptydtbo.img
fastboot erase init_boot // ? I don't remember if it's necessary, sorry
fastboot continue

Where emptydtbo.img is a tiny file that consists of 2 bytes (all zeroes), doing
a "fastboot erase" won't cut it, the bootloader will go crazy and things will
fall apart when it tries to overlay random bytes from an empty partition onto a
perfectly good appended DTB.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240210-topic-1v-v1-7-fda0db38e29b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-15 20:54:03 -05:00
Konrad Dybcio
6e4f7e5399 arm64: dts: qcom: sm8550: Mark DWC3 as dma-coherent 
In a fairly new development, Qualcomm somehow made the DWC3 block
cache-coherent. Annotate that.

Fixes: 7f7e5c1b03 ("arm64: dts: qcom: sm8550: Add USB PHYs and controller nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240210-topic-1v-v1-6-fda0db38e29b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-15 20:54:03 -05:00
Konrad Dybcio
d18b5477dc arm64: dts: qcom: sm8550: Add missing DWC3 quirks 
As expected, Qualcomm DWC3 implementation come with a sizable number
of quirks. Make sure to account for all of them.

Fixes: 7f7e5c1b03 ("arm64: dts: qcom: sm8550: Add USB PHYs and controller nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240210-topic-1v-v1-5-fda0db38e29b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-15 20:54:03 -05:00
Konrad Dybcio
93395f9a8d arm64: dts: qcom: sm8550: Mark APPS SMMU as dma-coherent 
Like on earlier flagship Qualcomm SoCs, the SMMU is dma-coherent.
Mark it as such.

Fixes: ffc50b2d38 ("arm64: dts: qcom: Add base SM8550 dtsi")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240210-topic-1v-v1-4-fda0db38e29b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-15 20:54:03 -05:00
Konrad Dybcio
91fc74458d arm64: dts: qcom: sm8550: Mark QUPs and GPI dma-coherent 
These peripherals are DMA-coherent on 8550. Mark them as such.

Interestingly enough, the I2C master hubs are not.

Fixes: ffc50b2d38 ("arm64: dts: qcom: Add base SM8550 dtsi")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240210-topic-1v-v1-3-fda0db38e29b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-15 20:54:03 -05:00
Konrad Dybcio
212729551c dt-bindings: arm: qcom: Add Xperia 1 V 
Document the SM8550 SONY Xperia 1 V (PDX234) board.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240210-topic-1v-v1-2-fda0db38e29b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-15 20:54:03 -05:00
Danila Tikhonov
6c747d0fe7 arm64: dts: qcom: sc7180: Fix UFS PHY clocks 
QMP PHY used in SC7180 requires 3 clocks:

* ref - 19.2MHz reference clock from RPMh
* ref_aux - Auxiliary reference clock from GCC
* qref - QREF clock from GCC

While at it, let's move 'clocks' property before 'clock-names' to match
the style used commonly.

Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240401182240.55282-3-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-11 22:06:03 -05:00
Bjorn Andersson
58dc9622d5 arm64: dts: qcom: qcs6490-rb3gen2: Enable UFS 
The rb3gen2 has UFS memory, adjust the necessary supply voltage and add
the controller and phy nodes to enable this.

Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240327-rb3gen2-ufs-v2-1-3de6b5dd78dd@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-04 16:07:57 -05:00
Dmitry Baryshkov
e5fd6512f6 arm64: dts: qcom: sm8150-hdk: enable WiFI support 
Enable modem DSP and WiFI devices on the SM8150 HDK device. The HDK is
manufactured by Lantronix, but it attributed to Qualcomm, so the
calibration string uses Qualcomm as manufacturer.

For reference:

ath10k_snoc 18800000.wifi: qmi chip_id 0x30224 chip_family 0x4001 board_id 0x55 soc_id 0x40060000
ath10k_snoc 18800000.wifi: qmi fw_version 0x32040163 fw_build_timestamp 2019-10-08 05:42 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.2.0-00355-QCAHLSWMTPLZ-1
ath10k_snoc 18800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000
ath10k_snoc 18800000.wifi: kconfig debug 1 debugfs 0 tracing 0 dfs 0 testmode 0
ath10k_snoc 18800000.wifi: firmware ver  api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790
ath10k_snoc 18800000.wifi: htt-ver 3.73 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1
ath10k_snoc 18800000.wifi: invalid MAC address; choosing random

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240403-sm8150-hdk-wifi-v1-1-8da3063829c2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-04 16:06:51 -05:00
Siddharth Manthan
05c65922bd arm64: dts: qcom: msm8916-samsung-fortuna: Add PWM backlight 
Most of the Galaxy Grand Prime use backlight drivers controlled with PWM
signal.
To simplify the description, add the backlight with the necessary clk-pwm
to the common dtsi.

Signed-off-by: Siddharth Manthan <siddharth.manthan@gmail.com>
[Stephan: Move to fortuna-common and disable on rossa-common]
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
[Raymond: Add the commit message]
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Link: https://lore.kernel.org/r/20240404121703.17086-3-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-04 16:06:33 -05:00
Joe Mason
f8dddefcb9 arm64: dts: qcom: msm8916-samsung-fortuna: Add touchscreen 
Like msm8916-samsung-a3u-eur, the Grand Prime uses a Zinitix BT541
touchscreen. Add it together with the necessary fixed-regulator to the
device tree.

Signed-off-by: Joe Mason <buddyjojo06@outlook.com>
[Raymond: Move to fortuna-common. Use interrupts-extended]
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240404121703.17086-2-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-04 16:06:33 -05:00
Bjorn Andersson
c3d9acc529 arm64: dts: qcom: qcs6490-rb3gen2: Enable USB Type-C display 
With the ADSP remoteproc loaded pmic_glink can be introduced and
together with the redriver wired up to provide role and orientation
switching signals as well as USB Type-C display on the RB3gen2.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-By: Krishna Kurapati PSSNV <quic_kriskura@quicinc.com>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240326-rb3gen2-dp-connector-v2-5-a9f1bc32ecaf@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-03 13:49:50 -05:00
Bjorn Andersson
a1615efb7c arm64: dts: qcom: qcs6490-rb3gen2: Introduce USB redriver 
The RB3gen2 has a USB redriver on APPS_I2C, enable the bus and introduce
the redriver. The plumbing with other components is kept separate for
clarity.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240326-rb3gen2-dp-connector-v2-4-a9f1bc32ecaf@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-03 13:49:50 -05:00
Bjorn Andersson
3eb0b024de arm64: dts: qcom: qcs6490-rb3gen2: Enable adsp and cdsp 
Define firmware paths and enable the ADSP and CDSP remoteprocs.

Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240326-rb3gen2-dp-connector-v2-3-a9f1bc32ecaf@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-03 13:49:50 -05:00
Bjorn Andersson
756efb7cb7 arm64: dts: qcom: qcs6490-rb3gen2: Add DP output 
The RB3Gen2 board comes with a mini DP connector, describe this, enable
MDSS, DP controller and the PHY that drives this.

Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240326-rb3gen2-dp-connector-v2-2-a9f1bc32ecaf@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-03 13:49:50 -05:00
Bjorn Andersson
d0d6230aa9 arm64: dts: qcom: sc7280: Enable MDP turbo mode 
The max frequency listed in the DPU opp-table is 506MHz, this is not
sufficient to drive a 4k@60 display, resulting in constant underrun.

Add the missing MDP_CLK turbo frequency of 608MHz to the opp-table to
fix this.

Acked-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240326-rb3gen2-dp-connector-v2-1-a9f1bc32ecaf@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-03 13:49:49 -05:00
Konrad Dybcio
7c2a774f02 arm64: dts: qcom: msm8998-yoshino: Enable RGB led 
Add the multicolor description and enable the PMI8998 LPG to expose the
RGB notification LED.

Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240316-topic-maple_led-v1-1-ca3430fd9dc5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-03 13:49:49 -05:00
Sebastian Raase
83ef6a5afc arm64: dts: qcom: msm8998-yoshino: fix volume-up key 
The volume-up key is connected to gpio6 on yoshino.
Fix button node ordering while at it.
Disable pm8998_resin, since it is now unused.

Tested on maple and lilac.

Fixes: 390883af89 ("arm64: dts: qcom: msm8998: Introduce support for Sony Yoshino platform")
Signed-off-by: Sebastian Raase <linux@sraa.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240315225237.1616550-1-linux@sraa.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-03 13:49:49 -05:00
Sebastian Raase
0fba148c3a arm64: dts: qcom: sdm630-nile: add pinctrl for camera key 
Add pinctrl configuration for gpio-keys. Without this,
camera button half-presses are not detected.

Tested on discovery and pioneer.

Fixes: e781633b60 ("arm64: dts: qcom: Add support for Sony Xperia XA2/Plus/Ultra (Nile platform)")
Signed-off-by: Sebastian Raase <linux@sraa.de>
Link: https://lore.kernel.org/r/20240315085934.1511722-1-linux@sraa.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-03 13:49:49 -05:00
Luca Weiss
d2209f6730 dt-bindings: arm: qcom: Add Sony Xperia Z3 
Add the compatible for this Sony smartphone.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20240314-shinano-common-v2-2-a0fce1c72c74@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-03 13:49:49 -05:00
Krzysztof Kozlowski
216e62744b arm64: dts: qcom: apq8016-sbc: correct GPIO LEDs node names 
Individual LEDs in a GPIO LEDs device node are not addressable, thus
unit address is not correct.

dtc is also not happy:

  Warning (unit_address_vs_reg): /leds/led@5: node has a unit name, but no reg or ranges property

Reported-by: Sumit Garg <sumit.garg@linaro.org>
Closes: https://lore.kernel.org/all/CAFA6WYNRwF7GqhBk2B7i-deT3aLxNQckhnOasjip2TYm4HZgAw@mail.gmail.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240314112657.167006-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-03 13:49:49 -05:00
Neil Armstrong
9f42f7380f arm64: dts: qcom: sm8650: fix usb interrupts properties 
Update the usb interrupts properties to fix the following
bindings check errors:
usb@a6f8800: interrupt-names:0: 'pwr_event' was expected
        from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
usb@a6f8800: interrupt-names:1: 'hs_phy_irq' was expected
	from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
usb@a6f8800: interrupt-names:2: 'dp_hs_phy_irq' was expected
        from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
usb@a6f8800: interrupt-names:3: 'dm_hs_phy_irq' was expected
        from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
usb@a6f8800: interrupt-names: ['hs_phy_irq', 'ss_phy_irq', 'dm_hs_phy_irq', 'dp_hs_phy_irq'] is too short
        from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#

Cc: Krishna Kurapati <quic_kriskura@quicinc.com>
Fixes: 10e0246712 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240314-topic-sm8650-upstream-usb-dt-irq-fix-v1-1-ea8ab2051869@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-03 13:49:49 -05:00
Dmitry Baryshkov
3867ad6d39 arm64: dts: qcom: msm8916: drop dtbTool-specific compatibles 
Drop two board compatibles that were used by the skales dtbTool to index
device tree blobs. It was required to boot those devices with the
original bootloader, however all users should have switched to the
lk2nd bootloader by now.

Suggested-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240314-msm8916-drop-compats-v2-2-5a4b40f832d3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-03 13:49:49 -05:00
Dmitry Baryshkov
88d0e4e10d dt-bindings: arm: qcom: drop dtbTool-specific compatibles 
Drop two board compatibles that were used by the skales dtbTool to index
device tree blobs. It was required to boot those devices with the
original bootloader, however all users should have switched to the
lk2nd bootloader by now.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240314-msm8916-drop-compats-v2-1-5a4b40f832d3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-03 13:49:49 -05:00
Luca Weiss
dfd5ee7b34 arm64: dts: qcom: sc7280: Add inline crypto engine 
Add the ICE found on sc7280 and link it to the UFS node.

For reference:

  [    0.261424] qcom-ice 1d88000.crypto: Found QC Inline Crypto Engine (ICE) v3.2.0

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240313-sc7280-ice-v1-2-3fa089fb7a27@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-03 13:49:49 -05:00
Paweł Owoc
5f78d9213a arm64: dts: qcom: ipq8074: Remove unused gpio from QPIC pins 
gpio16 will only be used for LCD support, as its NAND/LCDC data[8]
so its bit 9 of the parallel QPIC interface, and ONFI NAND is only 8
or 16-bit with only 8-bit one being supported in our case so that pin
is unused.

It should be dropped from the default NAND pinctrl configuration
as its unused and only needed for LCD.

Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20240313102713.1727458-1-frut3k7@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-03 13:49:49 -05:00
Dmitry Baryshkov
cb06e2b406 arm64: dts: qcom: sm8350: Add interconnects to UFS 
To ensure that UFS doesn't get disconnected from NoC, add interconnect properties
to the UFS controller.

Fixes: 59c7cf8147 ("arm64: dts: qcom: sm8350: Add UFS nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240313-sm8350-ufs-icc-v1-1-73fa2da99779@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-03 13:49:49 -05:00
Stephen Boyd
9f618cdce2 arm64: dts: qcom: sc7180: Disable DCC node by default 
We don't use this device on Trogdor boards. If we did, it would be
enabled in the sc7180-trogdor.dtsi file. Let's disable this here so that
boards with t he sc7180 SoC can decide to enable or disable this device.

Cc: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Fixes: add74cad7c ("arm64: dts: qcom: sc7180: Add Data Capture and Compare(DCC) support node")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240229013503.483651-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-02 22:34:06 -05:00
Stephen Boyd
cb69e758d5 arm64: dts: qcom: sc7180: Disable pmic pinctrl node on Trogdor 
We don't use this pmic pinctrl node on any Trogdor devices. The
AP_SUSPEND pin is here, but this pinctrl device isn't a supplier to
anything in the devicetrees that include this file. Disable this device
node in the DTS so that we don't waste time or memory on this device.

Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240229012828.438020-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-02 22:33:59 -05:00
Dmitry Baryshkov
1106ea2266 arm64: dts: qcom: sc8180x: add dp_p1 register blocks to DP nodes 
DisplayPort nodes must declare the dp_p1 register space in addition to
dp_p0. Add corresponding resource to DisplayPort DT nodes.

Fixes: 494dec9b6f ("arm64: dts: qcom: sc8180x: Add display and gpu nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240402-fd-fix-schema-v3-4-817ea6ddf775@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-02 12:27:37 -05:00
Dmitry Baryshkov
580701ec27 arm64: dts: qcom: sc8180x: Drop flags for mdss irqs 
The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.

Fixes: 494dec9b6f ("arm64: dts: qcom: sc8180x: Add display and gpu nodes")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240402-fd-fix-schema-v3-3-817ea6ddf775@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-02 12:27:37 -05:00
Dmitry Baryshkov
7fb5680b58 arm64: dts: qcom: sc8180x: drop legacy property #stream-id-cells 
The property #stream-id-cells is legacy, it is not documented as valid
for the GPU. Drop it now.

Fixes: 494dec9b6f ("arm64: dts: qcom: sc8180x: Add display and gpu nodes")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240402-fd-fix-schema-v3-2-817ea6ddf775@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
 2024-04-02 12:27:37 -05:00