There are two macros to issue a cmdq write: MM_REG_WRITE_MASK and
MM_REG_WRITE, but confusingly, both of them take a mask parameter. The
difference is that MM_REG_WRITE additionally checks whether the mask
passed in contains the register mask, in which case, the 0xffffffff mask
is passed to cmdq_pkt_write_mask(), effectively disregarding the mask
and calling cmdq_pkt_write() as an optimization.
Move that optimization to the MM_REG_WRITE_MASK macro and make
MM_REG_WRITE the variant that doesn't take a mask, directly calling to
cmdq_pkt_write().
Change the call sites to MM_REG_WRITE whenever a mask wasn't necessary
(ie 0xffffffff or a <register>_MASK was passed as mask) and in other
cases to MM_REG_WRITE_MASK.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The stm32mp25 supports both parallel & csi inputs.
An additional clock control is necessary.
Skeleton of the subdev structures for the stm32mp25 is added,
identical for the time being to the stm32mp13 however more subdeves
will be added in further commits.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add the stm32mp25 compatible for the DCMIPP.
The stm32mp25 distinguish with the stm32mp13 by the fact that:
- supports also csi inputs in addition to parallel inputs
- requires an addition csi clock to be present
Add also access-controllers, an optional property that
allows a peripheral to refer to one or more domain access controller(s).
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add hw_revision field information of the media controller so that
application can distinguish between variants of DCMIPP implementations.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Avoid duplication of enumerated pixelformat on the bytecap
video capture device. Indeed, since the bytecap format list
contains both CSI & parallel 16bits formats, ensure that same
pixelformat are not reported twice when performing enumeration
of supported formats.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add 1X16 RGB & YUV formats support within bytecap & byteproc.
Slightly change the link_validate function to be able to validate
against either 1X16 or 2X8 variant of a format.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
On stm32mp25, the dcmipp can accept data coming from a CSI bus in
addition to the parallel interface. Add this support into
dcmipp-input subdev.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
In preparation of the introduction of dcmipp csi input support, rename
the dcmipp_parallel subdev into a generic dcmipp_input which will be in
charge of handling both parallel input & csi input.
Only structures / variables / functions and file naming are changed without
any functional modifications.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Replace s_stream ops with enable_streams and disable_streams.
At the same time, use v4l2_subdev_enable_streams and
v4l2_subdev_disable_streams functions instead of
direct s_stream calls.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Rely on v4l2_subdev_is_streaming in order to know if the subdev
is streaming or not instead of relying on a local variable.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The STM32 CSI controller is tightly coupled with the DCMIPP and act as an
input stage to receive data coming from the sensor and transferring
them into the DCMIPP.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Correct the call to dma_set_mask_and_coherent which should be set
to DMA_BIT_MASK(32).
Fixes: 28e0f37722 ("media: stm32-dcmipp: STM32 DCMIPP camera interface driver")
Cc: stable@vger.kernel.org
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The header clearly states that it does not want to be included directly,
only via 'device.h'. 'platform_device.h' works equally well. Remove the
direct inclusion.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There is no need to pass constants via stack. The width may be explicitly
specified in the format.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There is no need to pass constants via stack. The width may be explicitly
specified in the format.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
cx18_reset_ir_gpio() has been unused in tree since 2009
commit eefe1010a4 ("V4L/DVB (10759): cx18: Convert GPIO connected
functions to act as v4l2_subdevices")
It has a comment saying it's exported for use by 'lirc_pvr150' but I don't
see any sign of it in the lirc git, and I see it removed support
for lirc_i2c.c 'Flavors of the Hauppage PVR-150...' in 2014.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There apparently is no reason to require 3 queued buffers to call
streamon() for the RkISP1 as the driver operates with a scratch buffer
where frames can be directed to if there's no available buffer provided
by userspace.
Reduce the number of required buffers to 1 to allow applications to
operate with a single queued buffer.
Tested with libcamera, by operating with a single capture request. The
same request (and associated capture buffer) gets recycled once
completed. This of course causes a frame rate drop but doesn't hinder
operations.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20241007124225.63463-1-jacopo.mondi@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Qualcomm IP catalog says that all CAMSS interrupts are edge rising,
fix it in the documented example from CAMSS device tree bindings for
SM8250 SoC.
Fixes: 46f8ac8497 ("media: dt-bindings: media: camss: Add qcom,sm8250-camss binding")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Qualcomm IP catalog says that all CAMSS interrupts are edge rising,
fix it in the documented example from CAMSS device tree bindings for
sdm845 SoC.
Fixes: d1d5ce2601 ("media: dt-bindings: media: camss: Add qcom,sdm845-camss binding")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Qualcomm IP catalog says that all CAMSS interrupts are edge rising,
fix it in the documented example from CAMSS device tree bindings
for sc8280xp SoC.
Fixes: bc5191e579 ("media: dt-bindings: media: camss: Add qcom,sc8280xp-camss binding")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Refactor the camss_link_entities function by breaking it down into
three distinct functions. Each function will handle the linking of
a specific entity separately.
SC7280 and later targets mandates for 1:1 linking for csid -> vfe.
i.e. csid0 can be mapped to vfe0 only.
Signed-off-by: Suresh Vankadara <quic_svankada@quicinc.com>
Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Introducing a new function camss_link_err to avoid repition of
same error message, improving code maintainability.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Update my email address as I am no longer working at Bootlin and have
started my own consulting company: sys-base.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Do not define stuff used in a single source file in a global header.
Do not mix defines with "bare" values in the initialization.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
A mfc_debug_enter() is not balanced by a corresponding mfc_debug_leave().
Add the missing call.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
fc0013_rc_cal_add() and fc0013_rc_cal_reset() were added in 2012's
commit e889adc911 ("[media] fc001x: tuner driver for FC0013")
but haven't been used.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
fimc_is_param_strerr() was added in 2013 by
commit 9a761e4368 ("[media] exynos4-is: Add Exynos4x12 FIMC-IS driver")
but has never been called.
Remove it.
(The other possibility might be to add a call maybe in fimc-is-param ?)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
flexcop_dma_control_size_irq() last use was removed in 2005 by
commit 64221be7b9 ("[PATCH] dvb: flexcop: woraround irq stop problem")
flexcop_dump_reg() last use was removed in 2009 by
commit 382c5546d6 ("V4L/DVB (10694): [PATCH] software IRQ watchdog for
Flexcop B2C2 DVB PCI cards")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The variable value is being assigned a value that is never read
afterwards, the following if statement re-assigns it with a new
value in both paths of the if statement. The assignment is
redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Commit 78fe66360e ("misc: ti-st: st_kim: remove the driver") deletes the
ti-st driver and its corresponding config option TI_ST.
With that deletion, the Texas Instruments WL128x FM Radio driver is now
dead as well. Delete this obsolete driver.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The proble is on the first line:
if (jpeg->pd_dev[i] && !pm_runtime_suspended(jpeg->pd_dev[i]))
If jpeg->pd_dev[i] is an error pointer, then passing it to
pm_runtime_suspended() will lead to an Oops. The other conditions
check for both error pointers and NULL, but it would be more clear to
use the IS_ERR_OR_NULL() check for that.
Fixes: fd0af4cd35 ("media: imx-jpeg: Ensure power suppliers be suspended before detach them")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The platform compatibility checks for MT8183 and
MT8195 in mdp_cmdq_prepare() are redundant as they are
done in __get_config_offset() itself. Furthermore
there are two if-else branch in __get_config_offset()
which have similar conditions and are redundant.
To address this, remove the check in mdp_cmdq_prepare()
and combine the two if-else branch into one in
__get_config_offset().
Signed-off-by: Mohammed Anees <pvmohammedanees2003@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Pull i2c component probing support from Wolfram Sang:
"Add OF component probing.
Some devices are designed and manufactured with some components having
multiple drop-in replacement options. These components are often
connected to the mainboard via ribbon cables, having the same signals
and pin assignments across all options. These may include the display
panel and touchscreen on laptops and tablets, and the trackpad on
laptops. Sometimes which component option is used in a particular
device can be detected by some firmware provided identifier, other
times that information is not available, and the kernel has to try to
probe each device.
Instead of a delicate dance between drivers and device tree quirks,
this change introduces a simple I2C component probe function. For a
given class of devices on the same I2C bus, it will go through all of
them, doing a simple I2C read transfer and see which one of them
responds. It will then enable the device that responds"
* tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: fix typo in I2C OF COMPONENT PROBER
of: base: Document prefix argument for of_get_next_child_with_prefix()
i2c: Fix whitespace style issue
arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
platform/chrome: Introduce device tree hardware prober
i2c: of-prober: Add GPIO support to simple helpers
i2c: of-prober: Add simple helpers for regulator support
i2c: Introduce OF component probe function
of: base: Add for_each_child_of_node_with_prefix()
of: dynamic: Add of_changeset_update_prop_string
Pull bprintf() removal from Steven Rostedt:
- Remove unused bprintf() function, that was added with the rest of the
"bin-printf" functions.
These are functions that are used by trace_printk() that allows to
quickly save the format and arguments into the ring buffer without
the expensive processing of converting numbers to ASCII. Then on
output, at a much later time, the ring buffer is read and the string
processing occurs then. The bprintf() was added for consistency but
was never used. It can be safely removed.
* tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
printf: Remove unused 'bprintf'
Pull timer fixes from Borislav Petkov:
- Fix a case where posix timers with a thread-group-wide target would
miss signals if some of the group's threads are exiting
- Fix a hang caused by ndelay() calling the wrong delay function
__udelay()
- Fix a wrong offset calculation in adjtimex(2) when using ADJ_MICRO
(microsecond resolution) and a negative offset
* tag 'timers_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-timers: Target group sigqueue to current task only if not exiting
delay: Fix ndelay() spuriously treated as udelay()
ntp: Remove invalid cast in time offset math
