Factor out the calculation into phy_mipi_dphy_calc_config(). This is
needed for the follow up patch which adds the support to calculate the
timings based on a given hs clock. No functional changes are done.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Complain in the newly added s_stream video op wrapper if disabling
streaming failed. Also return zero in this case as there's nothing the
caller can do to return the error.
This way drivers also won't need to bother with printing error messages.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Add support for low-power probe to the driver. Also fix runtime PM API
usage in the driver.
Much of the hassle comes from different factors affecting device power
states during probe for ACPI and DT.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Fixes: 859891228e ("media: i2c: dw9768: Add DW9768 VCM driver")
Implement read-only access to crop selection rectangles to expose the
analogue crop rectangle. The public (leaked) IMX290 documentation is not
very clear on how cropping is implemented and configured exactly, so
the margins may not be entirely accurate.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The driver duplicates the same pattern to access the try or active
format in multiple locations. Factor it out to a separate function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add support for the V4L2_CID_HBLANK and V4L2_CID_VBLANK controls to the
imx290 driver. Make the controls read-only to start with, to report the
values to userspace for timing calculation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The gain is expressed in multiple of 0.3dB, as a value between 0.0dB
and 72.0dB. Gains between 0.0dB and 30.0dB (included) apply analog gain
only, higher gains from 30.3dB to 72dB apply additional digital gain.
The maximum gain value is erroneously set to 72. Increase it to 100 to
cover the whole analog gain range. Support for digital gain can be added
separately if needed.
The IMX327 and IMX462 are largely compatible with the IMX290, but have
an analog gain range of 0.0dB to 29.4dB and 42dB of digital gain. When
support for those sensors gets added to the driver, the gain control
should be adjusted accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Define macros for all registers programmed by the driver for which
documentation is available to increase readability. This starts making
use of 16-bit registers in the register arrays, so the value field has
to be increased to 32 bits.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Error handling for register writes requires checking the error status of
every single write. This makes the code complex, or incorrect when the
checks are omitted. Simplify this by passing a pointer to an error code
to the imx290_write_reg() function, which allows writing multiple
registers in a row and only checking for errors at the end.
While at it, rename imx290_write_reg() to imx290_write() as there's
nothing else than registers to write, and rename imx290_read_reg()
accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Define registers with the appropriate size, using the variable-size
register access mechanism that has just been introduced. This simplifies
the code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The IMX290 has registers of different sizes. To simplify the code,
handle this in the read/write functions instead of in the callers by
encoding the register size in the symbolic name macros. All registers
are defined as 8-bit for now, a subsequent change will move to larger
registers where applicable.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The HMAX value specifies the total line length in pixels. It's thus more
readable in decimal than hexadecimal. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The imx290_write_buffered_reg() function wraps a register write with
register hold, to enable changing multiple registers synchronously. It
is used for the gain only, which is an 8-bit register, defeating its
purpose.
The feature is useful, but should be implemented differently. Drop the
function for now, to prepare for a rework of register access.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Use ARRAY_SIZE(imx290->supplies) for code that needs the size of the
array, instead of relying on the IMX290_NUM_SUPPLIES. The result is less
error-prone as it ties the size to the array.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The link frequency and pixel rate controls are set without holding the
control handler lock, resulting in kernel warnings. As the value of
those controls depend on the format, the simplest fix is to use the
device lock for the control handler.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Convert the Sony IMX290 DT binding from text to YAML. Add Manivannan as
a maintainer given that he is listed in MAINTAINERS for the file, as
volunteering myself.
The name of the input clock, "xclk", is wrong as the hardware manual
names it INCK. As the device has a single clock, the name could be
omitted, but that would require a corresponding change to the driver and
is thus a candidate for further patches.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The VGXY61 has a quad lanes CSI-2 output port running at 800mbps per
lane, and supports RAW8, RAW10, RAW12, RAW14 and RAW16 formats.
The driver handles both sensor types:
- VG5661 and VG6661: 1.6 Mpx (1464 x 1104) 75fps.
- VG5761 and VG6761: 2.3 Mpx (1944 x 1204) 60 fps.
The driver supports:
- HDR linearize mode, HDR substraction mode, and no HDR
- GPIOs LEDs strobing
- Digital binning and analog subsampling
- Horizontal and vertical flip
- Manual exposure
- Analog and digital gains
- Test patterns
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
[Sakari Ailus: remove() now returns void]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add V4L2_CID_HDR_MODE as a menu item control to set the HDR mode of the
sensor, and its documentation.
Menu items are not standardized as they differ for each sensors.
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
This extends the greyscale media bus family originally from
MEDIA_BUS_FMT_Y8_1X8 up to MEDIA_BUS_FMT_Y14_1X14 by adding
MEDIA_BUS_FMT_Y16_1X16, and behaves the same way with 16 bits.
Add its documentation in subdev-formats.rst
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add a V4L2 sub-device driver for OmniVision OV4689 image sensor. This
is a 4 Mpx image sensor using the I2C bus for control and the CSI-2
bus for data.
This driver supports following features:
- manual exposure and analog gain control support
- test pattern support
- media controller support
- runtime PM support
- support following resolutions:
+ 2688x1520 at 30 fps
The driver provides all mandatory V4L2 controls for compatibility with
libcamera. The sensor supports 1/2/4-lane CSI-2 modes, but the driver
implements 4 lane mode only at this moment.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add a V4L2 sub-device driver for Omnivision ov08X40 image sensor.
This is a camera sensor using the I2C bus for control and the
CSI-2 bus for data.
This driver supports following features:
- manual exposure and analog/digital gain control support
- vblank/hblank control support
- test pattern support
- media controller support
- runtime PM support
- support following resolutions:
+ 3856x2464 at 30FPS
+ 1928x1208 at 30FPS
Signed-off-by: Jason Chen <jason.z.chen@intel.com>
Signed-off-by: Shawn Tu <shawnx.tu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Commit 1f391df446 ("media: v4l2-async: Use endpoints in
__v4l2_async_nf_add_fwnode_remote()") changed the data that is stored in
the v4l2_async_subdev internals from the fwnode pointer to the parent
device to the fwnode pointer to the matched endpoint. This broke the
sensor matching code, which relied on the particular fwnode data in the
v4l2_async_subdev internals. Fix this by simply matching the
v4l2_async_subdev pointer, which is already available there.
Reported-by: Daniel Scally <djrscally@gmail.com>
Fixes: fa91f1056f ("[media] exynos4-is: Add support for asynchronous subdevices registration")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
There were no runtime PM callbacks registered, leaving regulators being
enabled while the device is suspended on DT systems. Adjust and register
existing power controlling functions to turn them off/on.
Signed-off-by: Hidenori Kobayashi <hidenorik@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Error path seems to be swaped. Fix the order and provide some meaningful
names.
Fixes: bee3d51156 ("[media] ad5820: Add driver for auto-focus coil")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
If any of the checks related to the supported link frequencies fail, then
the V4L2 fwnode resources don't get released before returning, which leads
to a memleak. Fix this by properly freeing the V4L2 fwnode data in a
designated label.
Fixes: e8c0882685 ("media: i2c: add driver for the SK Hynix Hi-846 8M pixel camera")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Reviewed-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Runtime PM has been around for a decade or more, there's hardly a need to
use the V4L2 specific s_power() callback in drivers anymore. Document this
in s_power() callback documentation as well.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Calling v4l2_subdev_get_try_crop() and v4l2_subdev_get_try_compose()
with a subdev state of NULL leads to a NULL pointer dereference. This
can currently happen in imgu_subdev_set_selection() when the state
passed in is NULL, as this method first gets pointers to both the "try"
and "active" states and only then decides which to use.
The same issue has been addressed for imgu_subdev_get_selection() with
commit 30d03a0de650 ("ipu3-imgu: Fix NULL pointer dereference in active
selection access"). However the issue still persists in
imgu_subdev_set_selection().
Therefore, apply a similar fix as done in the aforementioned commit to
imgu_subdev_set_selection(). To keep things a bit cleaner, introduce
helper functions for "crop" and "compose" access and use them in both
imgu_subdev_set_selection() and imgu_subdev_get_selection().
Fixes: 0d346d2a6f ("media: v4l2-subdev: add subdev-wide state struct")
Cc: stable@vger.kernel.org # for v5.14 and later
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Pull kvm fixes from Paolo Bonzini:
"RISC-V:
- Fix compilation without RISCV_ISA_ZICBOM
- Fix kvm_riscv_vcpu_timer_pending() for Sstc
ARM:
- Fix a bug preventing restoring an ITS containing mappings for very
large and very sparse device topology
- Work around a relocation handling error when compiling the nVHE
object with profile optimisation
- Fix for stage-2 invalidation holding the VM MMU lock for too long
by limiting the walk to the largest block mapping size
- Enable stack protection and branch profiling for VHE
- Two selftest fixes
x86:
- add compat implementation for KVM_X86_SET_MSR_FILTER ioctl
selftests:
- synchronize includes between include/uapi and tools/include/uapi"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
tools: include: sync include/api/linux/kvm.h
KVM: x86: Add compat handler for KVM_X86_SET_MSR_FILTER
KVM: x86: Copy filter arg outside kvm_vm_ioctl_set_msr_filter()
kvm: Add support for arch compat vm ioctls
RISC-V: KVM: Fix kvm_riscv_vcpu_timer_pending() for Sstc
RISC-V: Fix compilation without RISCV_ISA_ZICBOM
KVM: arm64: vgic: Fix exit condition in scan_its_table()
KVM: arm64: nvhe: Fix build with profile optimization
KVM: selftests: Fix number of pages for memory slot in memslot_modification_stress_test
KVM: arm64: selftests: Fix multiple versions of GIC creation
KVM: arm64: Enable stack protection and branch profiling for VHE
KVM: arm64: Limit stage2_apply_range() batch size to largest block
KVM: arm64: Work out supported block level at compile time
This reverts commit 72a9585972.
It broke reboots on big-endian MIPS and MIPS64 malta QEMU instances,
which use the syscon driver. Little-endian is not effected, which means
likely it's important to handle regmap_get_val_endian() in this function
after all.
Fixes: 72a9585972 ("mfd: syscon: Remove repetition of the regmap_get_val_endian()")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull perf fixes from Borislav Petkov:
- Fix raw data handling when perf events are used in bpf
- Rework how SIGTRAPs get delivered to events to address a bunch of
problems with it. Add a selftest for that too
* tag 'perf_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
bpf: Fix sample_flags for bpf_perf_event_output
selftests/perf_events: Add a SIGTRAP stress test with disables
perf: Fix missing SIGTRAPs
Pull scheduler fixes from Borislav Petkov:
- Adjust code to not trip up CFI
- Fix sched group cookie matching
* tag 'sched_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Introduce struct balance_callback to avoid CFI mismatches
sched/core: Fix comparison in sched_group_cookie_match()
Pull objtool fix from Borislav Petkov:
- Fix ORC stack unwinding when GCOV is enabled
* tag 'objtool_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/orc: Fix unreliable stack dump with gcov
Pull x86 fixes from Borislav Petkov:
"As usually the case, right after a major release, the tip urgent
branches accumulate a couple more fixes than normal. And here is the
x86, a bit bigger, urgent pile.
- Use the correct CPU capability clearing function on the error path
in Intel perf LBR
- A CFI fix to ftrace along with a simplification
- Adjust handling of zero capacity bit mask for resctrl cache
allocation on AMD
- A fix to the AMD microcode loader to attempt patch application on
every logical thread
- A couple of topology fixes to handle CPUID leaf 0x1f enumeration
info properly
- Drop a -mabi=ms compiler option check as both compilers support it
now anyway
- A couple of fixes to how the initial, statically allocated FPU
buffer state is setup and its interaction with dynamic states at
runtime"
* tag 'x86_urgent_for_v6.0_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Fix copy_xstate_to_uabi() to copy init states correctly
perf/x86/intel/lbr: Use setup_clear_cpu_cap() instead of clear_cpu_cap()
ftrace,kcfi: Separate ftrace_stub() and ftrace_stub_graph()
x86/ftrace: Remove ftrace_epilogue()
x86/resctrl: Fix min_cbm_bits for AMD
x86/microcode/AMD: Apply the patch early on every logical thread
x86/topology: Fix duplicated core ID within a package
x86/topology: Fix multiple packages shown on a single-package system
hwmon/coretemp: Handle large core ID value
x86/Kconfig: Drop check for -mabi=ms for CONFIG_EFI_STUB
x86/fpu: Exclude dynamic states from init_fpstate
x86/fpu: Fix the init_fpstate size check with the actual size
x86/fpu: Configure init_fpstate attributes orderly
Pull io_uring follow-up from Jens Axboe:
"Currently the zero-copy has automatic fallback to normal transmit, and
it was decided that it'd be cleaner to return an error instead if the
socket type doesn't support it.
Zero-copy does work with UDP and TCP, it's more of a future proofing
kind of thing (eg for samba)"
* tag 'io_uring-6.1-2022-10-22' of git://git.kernel.dk/linux:
io_uring/net: fail zc sendmsg when unsupported by socket
io_uring/net: fail zc send when unsupported by socket
net: flag sockets supporting msghdr originated zerocopy
Pull hwmon fixes from Guenter Roeck:
- corsair-psu: Fix typo in USB id description, and add USB ID for new
PSU
- pwm-fan: Fix fan power handling when disabling fan control
* tag 'hwmon-for-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (corsair-psu) Add USB id of the new HX1500i psu
hwmon: (pwm-fan) Explicitly switch off fan power when setting pwm1_enable to 0
hwmon: (corsair-psu) fix typo in USB id description
