Fix a long-standing flaw in x86's TDP MMU where unloading roots on a vCPU can
result in the root being freed even though the root is completely valid and
can be reused as-is (with a TLB flush).
Fix a potential race in gmap_make_secure() and remove the last user of
follow_page() without FOLL_GET.
The old code is locking something it doesn't have a reference to, and
as explained by Jason and David in this discussion:
https://lore.kernel.org/linux-mm/Y9J4P%2FRNvY1Ztn0Q@nvidia.com/
it can lead to all kind of bad things, including the page getting
unmapped (MADV_DONTNEED), freed, reallocated as a larger folio and the
unlock_page() would target the wrong bit.
There is also another race with the FOLL_WRITE, which could race
between the follow_page() and the get_locked_pte().
The main point is to remove the last use of follow_page() without
FOLL_GET or FOLL_PIN, removing the races can be considered a nice
bonus.
Link: https://lore.kernel.org/linux-mm/Y9J4P%2FRNvY1Ztn0Q@nvidia.com/
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes: 214d9bbcd3 ("s390/mm: provide memory management functions for protected KVM guests")
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20230428092753.27913-2-imbrenda@linux.ibm.com>
On machines without the Destroy Secure Configuration Fast UVC, the
topmost level of page tables is set aside and freed asynchronously
as last step of the asynchronous teardown.
Each gmap has a host_to_guest radix tree mapping host (userspace)
addresses (with 1M granularity) to gmap segment table entries (pmds).
If a guest is smaller than 2GB, the topmost level of page tables is the
segment table (i.e. there are only 2 levels). Replacing it means that
the pointers in the host_to_guest mapping would become stale and cause
all kinds of nasty issues.
This patch fixes the issue by disallowing asynchronous teardown for
guests with only 2 levels of page tables. Userspace should (and already
does) try using the normal destroy if the asynchronous one fails.
Update s390_replace_asce so it refuses to replace segment type ASCEs.
This is still needed in case the normal destroy VM fails.
Fixes: fb491d5500 ("KVM: s390: pv: asynchronous destroy for reboot")
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20230421085036.52511-2-imbrenda@linux.ibm.com>
Pull parisc updates from Helge Deller:
"Two important fixes in here:
- The argument pointer register was wrong when calling 64-bit
firmware functions, which may cause random memory corruption or
crashes.
- Ensure page alignment in cache flush functions, otherwise not all
memory might get flushed.
The rest are cleanups (mmap implementation, panic path) and usual
smaller updates.
Summary:
- Calculate correct argument pointer in real64_call_asm()
- Cleanup mmap implementation regarding color alignment (John David
Anglin)
- Spinlock fixes in panic path (Guilherme G. Piccoli)
- build doc update for parisc64 (Randy Dunlap)
- Ensure page alignment in flush functions"
* tag 'parisc-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix argument pointer in real64_call_asm()
parisc: Cleanup mmap implementation regarding color alignment
parisc: Drop HP-UX constants and structs from grfioctl.h
parisc: Ensure page alignment in flush functions
parisc: Replace regular spinlock with spin_trylock on panic path
parisc: update kbuild doc. aliases for parisc64
parisc: Limit amount of kgdb breakpoints on parisc
Pull modules fix from Luis Chamberlain:
"One fix by Arnd far for modules which came in after the first pull
request.
The issue was found as part of some late compile tests with 0-day. I
take it 0-day does some secondary late builds with after some initial
ones"
* tag 'modules-6.4-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: include internal.h in module/dups.c
Pull more sysctl updates from Luis Chamberlain:
"As mentioned on my first pull request for sysctl-next, for v6.4-rc1
we're very close to being able to deprecating register_sysctl_paths().
I was going to assess the situation after the first week of the merge
window.
That time is now and things are looking good. We only have one which
had already an ACK for so I'm picking this up here now and the last
patch is the one that uses an axe.
I have boot tested the last patch and 0-day build completed
successfully"
* tag 'sysctl-6.4-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
sysctl: remove register_sysctl_paths()
kernel: pid_namespace: simplify sysctls with register_sysctl()
Pull uml updates from Richard Weinberger:
- Make stub data pages configurable
- Make it harder to mix user and kernel code by accident
* tag 'uml-for-linus-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: make stub data pages size tweakable
um: prevent user code in modules
um: further clean up user_syms
um: don't export printf()
um: hostfs: define our own API boundary
um: add __weak for exported functions
Pull UBI and UBIFS updates from Richard Weinberger:
"UBI:
- Fix error value for try_write_vid_and_data()
- Minor cleanups
UBIFS:
- Fixes for various memory leaks
- Minor cleanups"
* tag 'ubifs-for-linus-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubifs: Fix memleak when insert_old_idx() failed
Revert "ubifs: dirty_cow_znode: Fix memleak in error handling path"
ubifs: Fix memory leak in do_rename
ubifs: Free memory for tmpfile name
ubi: Fix return value overwrite issue in try_write_vid_and_data()
ubifs: Remove return in compr_exit()
ubi: Simplify bool conversion
Pull more power management updates from Rafael Wysocki:
"These fix a hibernation test mode regression and clean up the
intel_idle driver.
Specifics:
- Make test_resume work again after the changes that made hibernation
open the snapshot device in exclusive mode (Chen Yu)
- Clean up code in several places in intel_idle (Artem Bityutskiy)"
* tag 'pm-6.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_idle: mark few variables as __read_mostly
intel_idle: do not sprinkle module parameter definitions around
intel_idle: fix confusing message
intel_idle: improve C-state flags handling robustness
intel_idle: further intel_idle_init_cstates_icpu() cleanup
intel_idle: clean up intel_idle_init_cstates_icpu()
intel_idle: use pr_info() instead of printk()
PM: hibernate: Do not get block device exclusively in test_resume mode
PM: hibernate: Turn snapshot_test into global variable
Pull more ACPI updates from Rafael Wysocki:
"These add two ACPI-related quirks and extend support for Apple device
properties supplied via ACPI _DSM.
Specifics:
- Do not turn off unused power resources during initialization on the
Toshiba Click Mini (Hans de Goede)
- Support strings in device properties supplied by ACPI _DSM on Apple
platforms (Hector Martin)
- Add an ACPI device ID quirk for Lenovo Yoga Tablet 2 (Marius Hoch)"
* tag 'acpi-6.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: property: Support strings in Apple _DSM props
ACPI: x86: utils: Remove Lenovo Yoga Tablet 2's MAGN0001
ACPI: PM: Do not turn of unused power resources on the Toshiba Click Mini
Pull more thermal control updates from Rafael Wysocki:
"These are mostly cleanups on top of the previously merged thermal
control changes plus some driver fixes and the removal of the Intel
Menlow thermal driver.
Specifics:
- Add compatible DT bindings for imx6sll and imx6ul to fix a dtbs
check warning (Stefan Wahren)
- Update the example in the DT bindings to reflect changes with the
ADC node name for QCom TM and TM5 (Marijn Suijten)
- Fix comments for the cpuidle_cooling_register() function to match
the function prototype (Chenggang Wang)
- Fix inconsistent temperature read and some Mediatek variant board
reboot by reverting a change and handling the temperature
differently (AngeloGioacchino Del Regno)
- Fix a memory leak in the initialization error path for the Mediatek
driver (Kang Chen)
- Use of_address_to_resource() in the Mediatek driver (Rob Herring)
- Fix unit address in the QCom tsens driver DT bindings (Krzysztof
Kozlowski)
- Clean up the step-wise thermal governor (Zhang Rui)
- Introduce thermal_zone_device() for accessing the device field of
struct thermal_zone_device and two drivers use it (Daniel Lezcano)
- Clean up the ACPI thermal driver a bit (Daniel Lezcano)
- Delete the thermal driver for Intel Menlow platforms that is not
expected to have any users (Rafael Wysocki)"
* tag 'thermal-6.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: menlow: Get rid of this driver
ACPI: thermal: Move to dedicated function sysfs extra attr creation
ACPI: thermal: Use thermal_zone_device()
thermal: intel: pch_thermal: Use thermal driver device to write a trace
thermal: core: Encapsulate tz->device field
thermal: gov_step_wise: Adjust code logic to match comment
thermal: gov_step_wise: Delete obsolete comment
dt-bindings: thermal: qcom-tsens: Correct unit address
thermal/drivers/mediatek: Use of_address_to_resource()
thermal/drivers/mediatek: Change clk_prepare_enable to devm_clk_get_enabled in mtk_thermal_probe
thermal/drivers/mediatek: Use devm_of_iomap to avoid resource leak in mtk_thermal_probe
thermal/drivers/mediatek: Add temperature constraints to validate read
Revert "thermal/drivers/mediatek: Add delay after thermal banks initialization"
thermal/drivers/cpuidle_cooling: Delete unmatched comments
dt-bindings: thermal: Use generic ADC node name in examples
dt-bindings: imx-thermal: Add imx6sll and imx6ul compatible
Pull pwm updates from Thierry Reding:
"The bulk of this is trivial conversions to the new .remove_new()
callback for drivers as part of Uwe's effort to clean that up.
Other than that a driver is added for Apple devices and various small
fixes are included for existing drivers.
Last but not least, this finally gets rid of the old pwm_request() and
pwm_free() APIs are removed since the last user was dropped in v6.3"
* tag 'pwm/for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits)
pwm: Remove unused radix tree
pwm: Delete deprecated functions pwm_request() and pwm_free()
pwm: meson: Fix g12a ao clk81 name
pwm: meson: Fix axg ao mux parents
pwm: stm32: Enforce settings for PWM capture
MAINTAINERS: Add entries for Apple PWM driver
pwm: Add Apple PWM controller
dt-bindings: pwm: Add Apple PWM controller
pwm: mtk-disp: Configure double buffering before reading in .get_state()
pwm: mtk-disp: Disable shadow registers before setting backlight values
pwm: stm32-lp: Drop of_match_ptr for ID table
pwm: rcar: Drop of_match_ptr for ID table
dt-bindings: pwm: Convert Amlogic Meson PWM binding
dt-bindings: pwm: mediatek: Add mediatek,mt7986 compatible
pwm: xilinx: Convert to platform remove callback returning void
pwm: vt8500: Convert to platform remove callback returning void
pwm: tiehrpwm: Convert to platform remove callback returning void
pwm: tiecap: Convert to platform remove callback returning void
pwm: tegra: Convert to platform remove callback returning void
pwm: sun4i: Convert to platform remove callback returning void
...
Pull phy updates from Vinod Koul:
"New support:
- UFS PHY for Qualcomm SA8775p, SM7150
- PCIe 2 lane phy support for sc8180x and PCIe PHY for SDX65
- Mediatke hdmi phy support for mt8195
- rockchip naneng combo phy support for RK358
Updates:
- Drop Thunder Bay eMMC PHY driver
- RC support for PCIe phy for Qualcomm SDX55
- SGMII support in WIZ driver for J721E
- PCIe and multilink SGMII PHY support in cadence driver
- Big pile of platform remove callback returning void conversions"
* tag 'phy-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (77 commits)
phy: cadence: cdns-dphy-rx: Add common module reset support
phy: ti: j721e-wiz: Add SGMII support in WIZ driver for J721E
dt-bindings: phy: ti: phy-gmii-sel: Add support for J784S4 CPSW9G
phy: ti: j721e-wiz: Fix unreachable code in wiz_mode_select()
phy: cadence: Sierra: Add PCIe + SGMII PHY multilink configuration
phy: mediatek: add support for phy-mtk-hdmi-mt8195
phy: phy-mtk-hdmi: Add generic phy configure callback
dt-bindings: phy: mediatek: hdmi-phy: Add mt8195 compatible
phy: tegra: xusb: Add missing tegra_xusb_port_unregister for usb2_port and ulpi_port
dt-bindings: phy: ti,phy-j721e-wiz: document clock-output-names
dt-bindings: phy: ti,phy-j721e-wiz: drop assigned-clocks
dt-bindings: phy: ti,phy-am654-serdes: drop assigned-clocks type
dt-bindings: phy: cadence-torrent: drop assigned-clocks
dt-bindings: phy: cadence-sierra: drop assigned-clocks
phy: rockchip: remove unused hw_to_inno function
phy: qualcomm: phy-qcom-qmp-ufs: add definitions for sa8775p
dt-bindings: phy: qmp-ufs: describe the UFS PHY for sa8775p
phy: qcom-qmp-pcie: drop sdm845_qhp_pcie_rx_tbl
phy: qcom-qmp-pcie: sc8180x PCIe PHY has 2 lanes
phy: qcom-qmp-ufs: Add SM7150 support
...
Pull dmaengine updates from Vinod Koul:
"New support:
- Apple admac t8112 device support
- StarFive JH7110 DMA controller
Updates:
- Big pile of idxd updates to support IAA 2.0 device capabilities,
DSA 2.0 Event Log and completion record faulting features and
new DSA operations
- at_xdmac supend & resume updates and driver code cleanup
- k3-udma supend & resume support
- k3-psil thread support for J784s4"
* tag 'dmaengine-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (57 commits)
dmaengine: idxd: add per wq PRS disable
dmaengine: idxd: add pid to exported sysfs attribute for opened file
dmaengine: idxd: expose fault counters to sysfs
dmaengine: idxd: add a device to represent the file opened
dmaengine: idxd: add per file user counters for completion record faults
dmaengine: idxd: process batch descriptor completion record faults
dmaengine: idxd: add descs_completed field for completion record
dmaengine: idxd: process user page faults for completion record
dmaengine: idxd: add idxd_copy_cr() to copy user completion record during page fault handling
dmaengine: idxd: create kmem cache for event log fault items
dmaengine: idxd: add per DSA wq workqueue for processing cr faults
dmanegine: idxd: add debugfs for event log dump
dmaengine: idxd: add interrupt handling for event log
dmaengine: idxd: setup event log configuration
dmaengine: idxd: add event log size sysfs attribute
dmaengine: idxd: make misc interrupt one shot
dt-bindings: dma: snps,dw-axi-dmac: constrain the items of resets for JH7110 dma
dt-bindings: dma: Drop unneeded quotes
dmaengine: at_xdmac: align declaration of ret with the rest of variables
dmaengine: at_xdmac: add a warning message regarding for unpaused channels
...
Fix the argument pointer (ap) to point to real-mode memory
instead of virtual memory.
It's interesting that this issue hasn't shown up earlier, as this could
have happened with any 64-bit PDC ROM code.
I just noticed it because I suddenly faced a HPMC while trying to execute
the 64-bit STI ROM code of an Visualize-FXe graphics card for the STI
text console.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
This change simplifies the randomization of file mapping regions. It
reworks the code to remove duplication. The flow is now similar to
that for mips. Finally, we consistently use the do_color_align variable
to determine when color alignment is needed.
Tested on rp3440.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Matthew Wilcox noticed, that if ARCH_HAS_FLUSH_ON_KUNMAP is defined
(which is the case for PA-RISC), __kunmap_local() calls
kunmap_flush_on_unmap(), which may call the parisc flush functions with
a non-page-aligned address and thus the page might not be fully flushed.
This patch ensures that flush_kernel_dcache_page_asm() and
flush_kernel_dcache_page_asm() will always operate on page-aligned
addresses.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v6.0+
The panic notifiers' callbacks execute in an atomic context, with
interrupts/preemption disabled, and all CPUs not running the panic
function are off, so it's very dangerous to wait on a regular
spinlock, there's a risk of deadlock.
Refactor the panic notifier of parisc/power driver to make use
of spin_trylock - for that, we've added a second version of the
soft-power function. Also, some comments were reorganized and
trailing white spaces, useless header inclusion and blank lines
were removed.
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jeroen Roovers <jer@xs4all.nl>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Merge hibernation test mode fix for 6.4-rc1.
* pm-sleep:
PM: hibernate: Do not get block device exclusively in test_resume mode
PM: hibernate: Turn snapshot_test into global variable
Merge an ACPI power management quirk and a change related to the
handling of ACPI device properties for 6.4-rc1:
- Do not turn off unused power resources during initialization on the
Toshiba Click Mini (Hans de Goede).
- Support strings in device properties supplied by ACPI _DSM on Apple
platforms (Hector Martin).
* acpi-pm:
ACPI: PM: Do not turn of unused power resources on the Toshiba Click Mini
* acpi-properties:
ACPI: property: Support strings in Apple _DSM props
Merge additional thermal core and ACPI thermal changes for 6.4-rc1:
- Clean up the step-wise thermal governor (Zhang Rui).
- Introduce thermal_zone_device() for accessing the device field of
struct thermal_zone_device and two drivers use it (Daniel Lezcano).
- Clean up the ACPI thermal driver a bit (Daniel Lezcano).
- Delete the thermal driver for Intel Menlow platforms that is not
expected to have any users (Rafael Wysocki).
* thermal-core:
thermal: intel: menlow: Get rid of this driver
ACPI: thermal: Move to dedicated function sysfs extra attr creation
ACPI: thermal: Use thermal_zone_device()
thermal: intel: pch_thermal: Use thermal driver device to write a trace
thermal: core: Encapsulate tz->device field
thermal: gov_step_wise: Adjust code logic to match comment
thermal: gov_step_wise: Delete obsolete comment
Two newly introduced functions are declared in a header that is not
included before the definition, causing a warning with sparse or
'make W=1':
kernel/module/dups.c:118:6: error: no previous prototype for 'kmod_dup_request_exists_wait' [-Werror=missing-prototypes]
118 | bool kmod_dup_request_exists_wait(char *module_name, bool wait, int *dup_ret)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/module/dups.c:220:6: error: no previous prototype for 'kmod_dup_request_announce' [-Werror=missing-prototypes]
220 | void kmod_dup_request_announce(char *module_name, int ret)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Add an explicit include to ensure the prototypes match.
Fixes: 8660484ed1 ("module: add debugging auto-load duplicate module support")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304141440.DYO4NAzp-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
The deprecation for register_sysctl_paths() is over. We can rejoice as
we nuke register_sysctl_paths(). The routine register_sysctl_table()
was the only user left of register_sysctl_paths(), so we can now just
open code and move the implementation over to what used to be
to __register_sysctl_paths().
The old dynamic struct ctl_table_set *set is now the point to
sysctl_table_root.default_set.
The old dynamic const struct ctl_path *path was being used in the
routine register_sysctl_paths() with a static:
static const struct ctl_path null_path[] = { {} };
Since this is a null path we can now just simplfy the old routine
and remove its use as its always empty.
This saves us a total of 230 bytes.
$ ./scripts/bloat-o-meter vmlinux.old vmlinux
add/remove: 2/7 grow/shrink: 1/1 up/down: 1015/-1245 (-230)
Function old new delta
register_leaf_sysctl_tables.constprop - 524 +524
register_sysctl_table 22 497 +475
__pfx_register_leaf_sysctl_tables.constprop - 16 +16
null_path 8 - -8
__pfx_register_sysctl_paths 16 - -16
__pfx_register_leaf_sysctl_tables 16 - -16
__pfx___register_sysctl_paths 16 - -16
__register_sysctl_base 29 12 -17
register_sysctl_paths 18 - -18
register_leaf_sysctl_tables 534 - -534
__register_sysctl_paths 620 - -620
Total: Before=21259666, After=21259436, chg -0.00%
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Pull pin control updates from Linus Walleij:
"Mostly drivers! Nothing special: some new Qualcomm chips as usual, and
the new NXP S32 and nVidia BlueField-3.
Core changes:
- Make a lot of pin controllers with GPIO and irqchips immutable,
i.e. not living structs, but const structs. This is driving a
changed initiated by the irqchip maintainers.
New drivers:
- New driver for the NXP S32 SoC pin controller
- As part of a thorough cleanup and restructuring of the
Ralink/Mediatek drivers, the Ralink MIPS pin control drivers were
folded into the Mediatek directory and the family is renamed
"mtmips". The Ralink chips live on as Mediatek MIPS family where
new variants can be added. As part of this work also the device
tree bindings were reworked.
- New subdriver for the Qualcomm SM7150 SoC.
- New subdriver for the Qualcomm IPQ9574 SoC.
- New driver for the nVidia BlueField-3 SoC.
- Support for the Qualcomm PMM8654AU mixed signal circuit GPIO.
- Support for the Qualcomm PMI632 mixed signal circuit GPIO.
Improvements:
- Add some missing pins and generic cleanups on the Renesas r8a779g0
and r8a779g0 pin controllers. Generic Renesas extension for power
source selection on several SoCs.
- Misc cleanups for the Atmel AT91 and AT91-PIO4 pin controllers
- Make the GPIO mode work on the Qualcomm SM8550-lpass-lpi driver.
- Several device tree binding cleanups as the binding YAML syntax is
solidifying"
* tag 'pinctrl-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (153 commits)
pinctrl-bcm2835.c: fix race condition when setting gpio dir
dt-bindings: pinctrl: qcom,sm8150: Drop duplicate function value "atest_usb2"
dt-bindings: pinctrl: qcom: Add few missing functions
pinctrl: qcom: spmi-gpio: Add PMI632 support
dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632
pinctrl: wpcm450: select MFD_SYSCON
pinctrl: qcom ssbi-gpio: Convert to immutable irq_chip
pinctrl: qcom ssbi-mpp: Convert to immutable irq_chip
pinctrl: qcom spmi-mpp: Convert to immutable irq_chip
pinctrl: plgpio: Convert to immutable irq_chip
pinctrl: pistachio: Convert to immutable irq_chip
pinctrl: pic32: Convert to immutable irq_chip
pinctrl: sx150x: Convert to immutable irq_chip
pinctrl: stmfx: Convert to immutable irq_chip
pinctrl: st: Convert to immutable irq_chip
pinctrl: mcp23s08: Convert to immutable irq_chip
pinctrl: equilibrium: Convert to immutable irq_chip
pinctrl: npcm7xx: Convert to immutable irq_chip
pinctrl: armada-37xx: Convert to immutable irq_chip
pinctrl: nsp: Convert to immutable irq_chip
...
Pull VFIO updates from Alex Williamson:
- Expose and allow R/W access to the PCIe DVSEC capability through
vfio-pci, as we already do with the legacy vendor capability
(K V P Satyanarayana)
- Fix kernel-doc issues with structure definitions (Simon Horman)
- Clarify ordering of operations relative to the kvm-vfio device for
driver dependencies against the kvm pointer (Yi Liu)
* tag 'vfio-v6.4-rc1' of https://github.com/awilliam/linux-vfio:
docs: kvm: vfio: Suggest KVM_DEV_VFIO_GROUP_ADD vs VFIO_GROUP_GET_DEVICE_FD ordering
vfio: correct kdoc for ops structures
vfio/pci: Add DVSEC PCI Extended Config Capability to user visible list.
Pull AFS updates from David Howells:
"Three fixes to AFS directory handling:
- Make sure that afs_read_dir() sees any increase in file size if the
file unexpectedly changed on the server (e.g. due to another client
making a change).
- Make afs_getattr() always return the server's dir file size, not
the locally edited one, so that pagecache eviction doesn't cause
the dir file size to change unexpectedly.
- Prevent afs_read_dir() from getting into an endless loop if the
server indicates that the directory file size is larger than
expected"
* tag 'afs-fixes-20230502' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Avoid endless loop if file is larger than expected
afs: Fix getattr to report server i_size on dirs, not local size
afs: Fix updating of i_size with dv jump from server
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for Renesas RZ/G2L MTU3
New Device Support:
- Add support for Lenovo Yoga Book X90F to Intel CHT WC
- Add support for MAX5970 and MAX5978 to Simple MFD (I2C)
- Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI
- Add support for AXP15060 PMIC to X-Powers PMIC collection
Remove Device Support:
- Remove support for Samsung 5M8751 and S5M8763 PMIC devices
New Functionality:
- Convert deprecated QCOM IRQ Chip to config registers
- Add support for 32-bit address spaces to Renesas SMUs
Fix-ups:
- Make use of APIs / MACROs designed to simplify and demystify
- Add / improve Device Tree bindings
- Memory saving struct layout optimisations
- Remove old / deprecated functionality
- Factor out unassigned register addresses from ranges
- Trivial: Spelling fixes, renames and coding style fixes
- Rid 'defined but not used' warnings
- Remove ineffective casts and pointer stubs
Bug Fixes:
- Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms
- Remove MODULE_*() helpers from non-tristate drivers
- Do not attempt to use out-of-range memory addresses associated with io_base
- Provide missing export helpers
- Fix remap bulk read optimisation fallout
- Fix memory leak issues in error paths"
* tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (88 commits)
dt-bindings: mfd: ti,j721e-system-controller: Add SoC chip ID
leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
dt-bindings: mfd: qcom,spmi-pmic: Document flash LED controller
dt-bindings: mfd: x-powers,axp152: Document the AXP15060 variant
mfd: axp20x: Add support for AXP15060 PMIC
dt-bindings: mfd: x-powers,axp152: Document the AXP313a variant
counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_ceiling_write()
dt-bindings: mfd: dlg,da9063: Document voltage monitoring
dt-bindings: mfd: stm32: Remove unnecessary blank lines
dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples
dt-bindings: mfd: syscon: Add nuvoton,ma35d1-sys compatible
MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver
counter: Add Renesas RZ/G2L MTU3a counter driver
Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
mfd: Add Renesas RZ/G2L MTU3a core driver
dt-bindings: timer: Document RZ/G2L MTU3a bindings
mfd: rsmu_i2c: Convert to i2c's .probe_new() again
mfd: intel-lpss: Add Intel Meteor Lake PCH-S LPSS PCI IDs
mfd: dln2: Fix memory leak in dln2_probe()
mfd: axp20x: Fix axp288 writable-ranges
...
Pull LED updates from Lee Jones:
"New Drivers:
- Add support for MediaTek MT6370 LED Indicator
- Add support for MediaTek MT6370 Flashlight
- Add support for QCOM PMIC Flash
- Add support for Rohm BD2606MVV Charge Pump LED
New Device Support:
- Add support for PMK8550 PWM to QCOM LPG
New Functionality:
- Add support for high resolution PWM to QCOM LPG
Fix-ups:
- Kconfig 'depends' and 'select' dependency changes
- Remove unused / irrelevant includes
- Remove unnecessary checks (already performed further into the call stack)
- Trivial: Fix commentary, simplify error messages
- Rid 'defined but not used' warnings
- Provide documentation
- Explicitly provide include files
Bug Fixes:
- Mark GPIO LED as BROKEN
- Fix Kconfig entries
- Fix various Smatch staticify reports
- Fix error handling (or a lack there of)"
* tag 'leds-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (30 commits)
leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
dt-bindings: leds: Add ROHM BD2606MVV LED
docs: leds: ledtrig-oneshot: Fix spelling mistake
leds: pwm-multicolor: Simplify an error message
dt-bindings: leds: Convert PCA9532 to dtschema
leds: rgb: leds-qcom-lpg: Add support for PMK8550 PWM
leds: rgb: leds-qcom-lpg: Add support for high resolution PWM
dt-bindings: leds-qcom-lpg: Add qcom,pmk8550-pwm compatible string
leds: tca6507: Fix error handling of using fwnode_property_read_string
leds: flash: Set variables mvflash_{3,4}ch_regs storage-class-specifier to static
leds: rgb: mt6370: Correct config name to select in LEDS_MT6370_RGB
MAINTAINERS: Add entry for LED devices documentation
Documentation: leds: MT6370: Use bullet lists for timing variables
Documentation: leds: mt6370: Properly wrap hw_pattern chart
Documentation: leds: Add MT6370 doc to the toctree
leds: rgb: mt6370: Fix implicit declaration for FIELD_GET
docs: leds: Add MT6370 RGB LED pattern document
leds: flash: mt6370: Add MediaTek MT6370 flashlight support
leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
dt-bindings: leds: spmi-flash-led: Add pm6150l compatible
...
afs_read_dir fetches an amount of data that's based on what the inode
size is thought to be. If the file on the server is larger than what
was fetched, the code rechecks i_size and retries. If the local i_size
was not properly updated, this can lead to an endless loop of fetching
i_size from the server and noticing each time that the size is larger on
the server.
If it is known that the remote size is larger than i_size, bump up the
fetch size to that size.
Fixes: f3ddee8dc4 ("afs: Fix directory handling")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Fix afs_getattr() to report the server's idea of the file size of a
directory rather than the local size. The local size may differ as we edit
the local copy to avoid having to redownload it and we may end up with a
differently structured blob of a different size.
However, if the directory is discarded from the pagecache we then download
it again and the user may see the directory file size apparently change.
Fixes: 63a4681ff3 ("afs: Locally edit directory data for mkdir/create/unlink/...")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
If the data version returned from the server is larger than expected,
the local data is invalidated, but we may still want to note the remote
file size.
Since we're setting change_size, we have to also set data_changed
for the i_size to get updated.
Fixes: 3f4aa98181 ("afs: Fix EOF corruption")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Pull input updates from Dmitry Torokhov:
- a new driver for Novatek touch controllers
- a new driver for power button for NXP BBNSM
- a skeleton KUnit tests for the input core
- improvements to Xpad game controller driver to support more devices
- improvements to edt-ft5x06, hideep and other drivers
* tag 'input-for-v6.4-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (42 commits)
Revert "Input: xpad - fix support for some third-party controllers"
dt-bindings: input: pwm-beeper: convert to dt schema
Input: xpad - fix PowerA EnWired Controller guide button
Input: xpad - add constants for GIP interface numbers
Input: synaptics-rmi4 - fix function name in kerneldoc
Input: raspberrypi-ts - fix refcount leak in rpi_ts_probe
Input: edt-ft5x06 - select REGMAP_I2C
Input: melfas_mip4 - report palm touches
Input: cma3000_d0x - remove unneeded code
Input: edt-ft5x06 - calculate points data length only once
Input: edt-ft5x06 - unify the crc check
Input: edt-ft5x06 - convert to use regmap API
Input: edt-ft5x06 - don't print error messages with dev_dbg()
Input: edt-ft5x06 - remove code duplication
Input: edt-ft5x06 - don't recalculate the CRC
Input: edt-ft5x06 - add spaces to ensure format specification
Input: edt-ft5x06 - remove unnecessary blank lines
Input: edt-ft5x06 - fix indentation
Input: tsc2007 - enable cansleep pendown GPIO
Input: Add KUnit tests for some of the input core helper functions
...
Pull kvm updates from Paolo Bonzini:
"s390:
- More phys_to_virt conversions
- Improvement of AP management for VSIE (nested virtualization)
ARM64:
- Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
- New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features being
moved to VMMs rather than be implemented in the kernel.
- Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one. This
last part allows the NV timer code to be implemented on top.
- A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
- The usual selftest fixes and improvements.
x86:
- Optimize CR0.WP toggling by avoiding an MMU reload when TDP is
enabled, and by giving the guest control of CR0.WP when EPT is
enabled on VMX (VMX-only because SVM doesn't support per-bit
controls)
- Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long"
return as a bool
- Move AMD_PSFD to cpufeatures.h and purge KVM's definition
- Avoid unnecessary writes+flushes when the guest is only adding new
PTEs
- Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s
optimizations when emulating invalidations
- Clean up the range-based flushing APIs
- Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a
single A/D bit using a LOCK AND instead of XCHG, and skip all of
the "handle changed SPTE" overhead associated with writing the
entire entry
- Track the number of "tail" entries in a pte_list_desc to avoid
having to walk (potentially) all descriptors during insertion and
deletion, which gets quite expensive if the guest is spamming
fork()
- Disallow virtualizing legacy LBRs if architectural LBRs are
available, the two are mutually exclusive in hardware
- Disallow writes to immutable feature MSRs (notably
PERF_CAPABILITIES) after KVM_RUN, similar to CPUID features
- Overhaul the vmx_pmu_caps selftest to better validate
PERF_CAPABILITIES
- Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
- AMD SVM:
- Add support for virtual NMIs
- Fixes for edge cases related to virtual interrupts
- Intel AMX:
- Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if
XTILE_DATA is not being reported due to userspace not opting in
via prctl()
- Fix a bug in emulation of ENCLS in compatibility mode
- Allow emulation of NOP and PAUSE for L2
- AMX selftests improvements
- Misc cleanups
MIPS:
- Constify MIPS's internal callbacks (a leftover from the hardware
enabling rework that landed in 6.3)
Generic:
- Drop unnecessary casts from "void *" throughout kvm_main.c
- Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the
struct size by 8 bytes on 64-bit kernels by utilizing a padding
hole
Documentation:
- Fix goof introduced by the conversion to rST"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (211 commits)
KVM: s390: pci: fix virtual-physical confusion on module unload/load
KVM: s390: vsie: clarifications on setting the APCB
KVM: s390: interrupt: fix virtual-physical confusion for next alert GISA
KVM: arm64: Have kvm_psci_vcpu_on() use WRITE_ONCE() to update mp_state
KVM: arm64: Acquire mp_state_lock in kvm_arch_vcpu_ioctl_vcpu_init()
KVM: selftests: Test the PMU event "Instructions retired"
KVM: selftests: Copy full counter values from guest in PMU event filter test
KVM: selftests: Use error codes to signal errors in PMU event filter test
KVM: selftests: Print detailed info in PMU event filter asserts
KVM: selftests: Add helpers for PMC asserts in PMU event filter test
KVM: selftests: Add a common helper for the PMU event filter guest code
KVM: selftests: Fix spelling mistake "perrmited" -> "permitted"
KVM: arm64: vhe: Drop extra isb() on guest exit
KVM: arm64: vhe: Synchronise with page table walker on MMU update
KVM: arm64: pkvm: Document the side effects of kvm_flush_dcache_to_poc()
KVM: arm64: nvhe: Synchronise with page table walker on TLBI
KVM: arm64: Handle 32bit CNTPCTSS traps
KVM: arm64: nvhe: Synchronise with page table walker on vcpu run
KVM: arm64: vgic: Don't acquire its_lock before config_lock
KVM: selftests: Add test to verify KVM's supported XCR0
...
Pull OpenRISC updates from Stafford Horne:
"Two things for OpenRISC this cycle:
- Small cleanup for device tree cpu iteration from Rob Herring
- Add support for storing, restoring and accessing user space FPU
state, to allow for libc to support the FPU on OpenRISC"
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc: Add floating point regset
openrisc: Support floating point user api
openrisc: Support storing and restoring fpu state
openrisc: Properly store r31 to pt_regs on unhandled exceptions
openrisc: Use common of_get_cpu_node() instead of open-coding
Pull RTC updates from Alexandre Belloni:
"Not much this cycle, there is the conversion to remove_new and many
small fixes in drivers:
Subsystem:
- Convert to platform remove callback returning void
Drivers:
- meson-vrtc: fix a firmware display issue"
* tag 'rtc-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (53 commits)
rtc: armada38x: use devm_platform_ioremap_resource_byname()
rtc: sunplus: use devm_platform_ioremap_resource_byname()
rtc: jz4740: Make sure clock provider gets removed
rtc: k3: handle errors while enabling wake irq
rtc: meson-vrtc: Use ktime_get_real_ts64() to get the current time
dt-bindings: rtc: Drop unneeded quotes
rtc: pcf8523: remove unnecessary OR operation
rtc: pcf8523: fix coding-style issues
rtc: ds1390: mark OF related data as maybe unused
rtc: omap: include header for omap_rtc_power_off_program prototype
rtc: sun6i: Use of_property_present() for testing DT property presence
rtc: mpfs: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE
rtc: zynqmp: Convert to platform remove callback returning void
rtc: xgene: Convert to platform remove callback returning void
rtc: wm8350: Convert to platform remove callback returning void
rtc: vt8500: Convert to platform remove callback returning void
rtc: twl: Convert to platform remove callback returning void
rtc: tps6586x: Convert to platform remove callback returning void
rtc: tegra: Convert to platform remove callback returning void
rtc: sunplus: Convert to platform remove callback returning void
...
Pull i3c updates from Alexandre Belloni:
"Subsystem:
- OF alias bus numbering
- convert to platform remove callback returning void
New driver:
- AST2600 controller, based on Synopsys DesignWare IP
Driver update:
- dw: add infrastructure to support different platform integrations"
* tag 'i3c/for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: ast2600: set variable ast2600_i3c_ops storage-class-specifier to static
i3c: ast2600: fix register setting for 545 ohm pullups
i3c: ast2600: enable IBI support
i3c: dw: Add a platform facility for IBI PEC workarounds
i3c: dw: Add support for in-band interrupts
i3c: dw: Turn DAT array entry into a struct
i3c: dw: Create a generic fifo read function
i3c: Allow OF-alias-based persistent bus numbering
i3c: ast2600: Add AST2600 platform-specific driver
dt-bindings: i3c: Add AST2600 i3c controller
i3c: dw: Add infrastructure for platform-specific implementations
i3c: dw: use bus mode rather than device reg for conditional tCAS setting
i3c: dw: Return the length from a read priv_xfer
i3c: svc: Convert to platform remove callback returning void
i3c: mipi-i3c-hci: Convert to platform remove callback returning void
i3c: cdns: Convert to platform remove callback returning void
i3c: dw: Convert to platform remove callback returning void
i3c: Make i3c_master_unregister() return void
i3c: dw: drop of_match_ptr for ID table
i3c: Correct reference to the I²C device data type
Pull ext4 fixes from Ted Ts'o:
"Some ext4 regression and bug fixes"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: clean up error handling in __ext4_fill_super()
ext4: reflect error codes from ext4_multi_mount_protect() to its callers
ext4: fix lost error code reporting in __ext4_fill_super()
ext4: fix unused iterator variable warnings
ext4: fix use-after-free read in ext4_find_extent for bigalloc + inline
ext4: fix i_disksize exceeding i_size problem in paritally written case
Pull cifs fixes from Steve French:
- deferred close fix for an important case when cached file should be
closed immediately
- two fixes for missing locks
- eight minor cleanup
* tag '6.4-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number for cifs.ko
smb3: move some common open context structs to smbfs_common
smb3: make query_on_disk_id open context consistent and move to common code
SMB3.1.1: add new tree connect ShareFlags
cifs: missing lock when updating session status
SMB3: Close deferred file handles in case of handle lease break
SMB3: Add missing locks to protect deferred close file list
cifs: Avoid a cast in add_lease_context()
cifs: Simplify SMB2_open_init()
cifs: Simplify SMB2_open_init()
cifs: Simplify SMB2_open_init()
Pull tpm fix from Jarkko Sakkinen:
"This fixes a critical bug in my first pull request.
I fixed the cherry pick issue and tested with real hardare and
libvirt/qemu plus swtpm"
* tag 'tpmdd-v6.4-rc1-fix-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: Re-enable TPM chip boostrapping non-tpm_tis TPM drivers
