Once a ring has been created, the size of the CQ and SQ rings are fixed.
Usually this isn't a problem on the SQ ring side, as it merely controls
the available number of requests that can be submitted in a single
system call, and there's rarely a need to change that.
For the CQ ring, it's a different story. For most efficient use of
io_uring, it's important that the CQ ring never overflows. This means
that applications must size it for the worst case scenario, which can
be wasteful.
Add IORING_REGISTER_RESIZE_RINGS, which allows an application to resize
the existing rings. It takes a struct io_uring_params argument, the same
one which is used to setup the ring initially, and resizes rings
according to the sizes given.
Certain properties are always inherited from the original ring setup,
like SQE128/CQE32 and other setup options. The implementation only
allows flag associated with how the CQ ring is sized and clamped.
Existing unconsumed SQE and CQE entries are copied as part of the
process. If either the SQ or CQ resized destination ring cannot hold the
entries already present in the source rings, then the operation is failed
with -EOVERFLOW. Any register op holds ->uring_lock, which prevents new
submissions, and the internal mapping holds the completion lock as well
across moving CQ ring state.
To prevent races between mmap and ring resizing, add a mutex that's
solely used to serialize ring resize and mmap. mmap_sem can't be used
here, as as fork'ed process may be doing mmaps on the ring as well.
The ctx->resize_lock is held across mmap operations, and the resize
will grab it before swapping out the already mapped new data.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The later mapping will actually check this too, but in terms of code
clarify, explicitly check for whether or not the rings and sqes are
valid during validation. That makes it explicit that if they are
non-NULL, they are valid and can get mapped.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Abstract out a io_uring_fill_params() helper, which fills out the
necessary bits of struct io_uring_params. Add it to io_uring.h as well,
in preparation for having another internal user of it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for needing this somewhere else, move the definitions
for the maximum CQ and SQ ring size into io_uring.h. Make the
rings_size() helper available as well, and have it take just the setup
flags argument rather than the fill ring pointer. That's all that is
needed.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We keep user pointers in an union, which could be a user buffer or a
user pointer to msghdr. What is confusing is that it potenitally reads
and assigns sqe->addr as one type but then uses it as another via the
union. Even more, it's not even consistent across copy and zerocopy
versions.
Make send and sendmsg setup helpers read sqe->addr and treat it as the
right type from the beginning. The end goal would be to get rid of
the use of struct io_sr_msg::umsg for send requests as we only need it
at the prep side.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/685d788605f5d78af18802fcabf61ba65cfd8002.1729607201.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Let's keep it close with the actual import, there's no reason to do this
on the prep side. With that, we can drop one of the branches checking
for whether or not IORING_RECVSEND_FIXED_BUF is set.
As a side-effect, get rid of req->imu usage.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All callers already hold the ring lock and hence are passing '0',
remove the argument and the conditional locking that it controlled.
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's assigned in the same function that it's being used, get rid of
it. A local variable will do just fine.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's pretty pointless to use io_kiocb as intermediate storage for this,
so split the validity check and the actual usage. The resource node is
assigned upfront at prep time, to prevent it from going away. The actual
import is never called with the ctx->uring_lock held, so grab it for
the import.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
iter->bvec is already set to imu->bvec - remove the one dead assignment
and turn the other one into an addition instead.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Convert to using kvmalloc/kfree() for the hash tables, and while at it,
make it handle low memory situations better.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Any access to the table is protected by ctx->uring_lock now anyway, the
per-bucket locking doesn't buy us anything.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It serves no purposes anymore, all it does is delete the hash list
entry. task_work always has the ring locked.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring maintains two hash lists of inflight requests:
1) ctx->cancel_table_locked. This is used when the caller has the
ctx->uring_lock held already. This is only an issue side parameter,
as removal or task_work will always have it held.
2) ctx->cancel_table. This is used when the issuer does NOT have the
ctx->uring_lock held, and relies on the table spinlocks for access.
However, it's pretty trivial to simply grab the lock in the one spot
where we care about it, for insertion. With that, we can kill the
unlocked table (and get rid of the _locked postfix for the other one).
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's always req->ctx being used anyway, having this as a separate
argument (that is then not even used) just makes it more confusing.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Normally MSG_RING requires both a source and a destination ring. But
some users don't always have a ring avilable to send a message from, yet
they still need to notify a target ring.
Add support for using io_uring_register(2) without having a source ring,
using a file descriptor of -1 for that. Internally those are called
blind registration opcodes. Implement IORING_REGISTER_SEND_MSG_RING as a
blind opcode, which simply takes an sqe that the application can put on
the stack and use the normal liburing helpers to initialize it. Then the
app can call:
io_uring_register(-1, IORING_REGISTER_SEND_MSG_RING, &sqe, 1);
and get the same behavior in terms of the target, where a CQE is posted
with the details given in the sqe.
For now this takes a single sqe pointer argument, and hence arg must
be set to that, and nr_args must be 1. Could easily be extended to take
an array of sqes, but for now let's keep it simple.
Link: https://lore.kernel.org/r/20240924115932.116167-3-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mostly just to skip them taking an io_kiocb, rather just pass in the
ctx and io_msg directly.
In preparation for being able to issue a MSG_RING request without
having an io_kiocb. No functional changes in this patch.
Link: https://lore.kernel.org/r/20240924115932.116167-2-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Everything else about the io_uring eventfd support is nicely kept
private to that code, except the cached_cq_tail tracking. With
everything else in place, move io_eventfd_flush_signal() to using
the ev_fd grab+release helpers, which then enables the direct use of
io_ev_fd for this tracking too.
Link: https://lore.kernel.org/r/20240921080307.185186-7-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull bluetooth fixes from Luiz Augusto Von Dentz:
- ISO: Fix multiple init when debugfs is disabled
- Call iso_exit() on module unload
- Remove debugfs directory on module init failure
- btusb: Fix not being able to reconnect after suspend
- btusb: Fix regression with fake CSR controllers 0a12:0001
- bnep: fix wild-memory-access in proto_unregister
Note: normally the bluetooth fixes go through the networking tree, but
this missed the weekly merge, and two of the commits fix regressions
that have caused a fair amount of noise and have now hit stable too:
https://lore.kernel.org/all/4e1977ca-6166-4891-965e-34a6f319035f@leemhuis.info/
So I'm pulling it directly just to expedite things and not miss yet
another -rc release. This is not meant to become a new pattern.
* tag 'for-net-2024-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: btusb: Fix regression with fake CSR controllers 0a12:0001
Bluetooth: bnep: fix wild-memory-access in proto_unregister
Bluetooth: btusb: Fix not being able to reconnect after suspend
Bluetooth: Remove debugfs directory on module init failure
Bluetooth: Call iso_exit() on module unload
Bluetooth: ISO: Fix multiple init when debugfs is disabled
Pull pin control fixes from Linus Walleij:
"Mostly error path fixes, but one pretty serious interrupt problem in
the Ocelot driver as well:
- Fix two error paths and a missing semicolon in the Intel driver
- Add a missing ACPI ID for the Intel Panther Lake
- Check return value of devm_kasprintf() in the Apple and STM32
drivers
- Add a missing mutex_destroy() in the aw9523 driver
- Fix a double free in cv1800_pctrl_dt_node_to_map() in the Sophgo
driver
- Fix a double free in ma35_pinctrl_dt_node_to_map_func() in the
Nuvoton driver
- Fix a bug in the Ocelot interrupt handler making the system hang"
* tag 'pinctrl-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: ocelot: fix system hang on level based interrupts
pinctrl: nuvoton: fix a double free in ma35_pinctrl_dt_node_to_map_func()
pinctrl: sophgo: fix double free in cv1800_pctrl_dt_node_to_map()
pinctrl: intel: platform: Add Panther Lake to the list of supported
pinctrl: aw9523: add missing mutex_destroy
pinctrl: stm32: check devm_kasprintf() returned value
pinctrl: apple: check devm_kasprintf() returned value
pinctrl: intel: platform: use semicolon instead of comma in ncommunities assignment
pinctrl: intel: platform: fix error path in device_for_each_child_node()
Pull misc driver fixes from Greg KH:
"Here are a number of small char/misc/iio driver fixes for 6.12-rc4:
- loads of small iio driver fixes for reported problems
- parport driver out-of-bounds fix
- Kconfig description and MAINTAINERS file updates
All of these, except for the Kconfig and MAINTAINERS file updates have
been in linux-next all week. Those other two are just documentation
changes and will have no runtime issues and were merged on Friday"
* tag 'char-misc-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (39 commits)
misc: rtsx: list supported models in Kconfig help
MAINTAINERS: Remove some entries due to various compliance requirements.
misc: microchip: pci1xxxx: add support for NVMEM_DEVID_AUTO for OTP device
misc: microchip: pci1xxxx: add support for NVMEM_DEVID_AUTO for EEPROM device
parport: Proper fix for array out-of-bounds access
iio: frequency: admv4420: fix missing select REMAP_SPI in Kconfig
iio: frequency: {admv4420,adrf6780}: format Kconfig entries
iio: adc: ad4695: Add missing Kconfig select
iio: adc: ti-ads8688: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency()
iioc: dac: ltc2664: Fix span variable usage in ltc2664_channel_config()
iio: dac: stm32-dac-core: add missing select REGMAP_MMIO in Kconfig
iio: dac: ltc1660: add missing select REGMAP_SPI in Kconfig
iio: dac: ad5770r: add missing select REGMAP_SPI in Kconfig
iio: amplifiers: ada4250: add missing select REGMAP_SPI in Kconfig
iio: frequency: adf4377: add missing select REMAP_SPI in Kconfig
iio: resolver: ad2s1210: add missing select (TRIGGERED_)BUFFER in Kconfig
iio: resolver: ad2s1210 add missing select REGMAP in Kconfig
iio: proximity: mb1232: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: pressure: bm1390: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
...
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.12-rc4:
- qcom-geni serial driver fixes, wow what a mess of a UART chip that
thing is...
- vt infoleak fix for odd font sizes
- imx serial driver bugfix
- yet-another n_gsm ldisc bugfix, slowly chipping down the issues in
that piece of code
All of these have been in linux-next for over a week with no reported
issues"
* tag 'tty-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: qcom-geni: rename suspend functions
serial: qcom-geni: drop unused receive parameter
serial: qcom-geni: drop flip buffer WARN()
serial: qcom-geni: fix rx cancel dma status bit
serial: qcom-geni: fix receiver enable
serial: qcom-geni: fix dma rx cancellation
serial: qcom-geni: fix shutdown race
serial: qcom-geni: revert broken hibernation support
serial: qcom-geni: fix polled console initialisation
serial: imx: Update mctrl old_status on RTSD interrupt
tty: n_gsm: Fix use-after-free in gsm_cleanup_mux
vt: prevent kernel-infoleak in con_font_get()
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.12-rc4:
- xhci driver fixes for a number of reported issues
- new usb-serial driver ids
- dwc3 driver fixes for reported problems.
- usb gadget driver fixes for reported problems
- typec driver fixes
- MAINTAINER file updates
All of these have been in linux-next this week with no reported issues"
* tag 'usb-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Telit FN920C04 MBIM compositions
USB: serial: option: add support for Quectel EG916Q-GL
xhci: dbc: honor usb transfer size boundaries.
usb: xhci: Fix handling errors mid TD followed by other errors
xhci: Mitigate failed set dequeue pointer commands
xhci: Fix incorrect stream context type macro
USB: gadget: dummy-hcd: Fix "task hung" problem
usb: gadget: f_uac2: fix return value for UAC2_ATTRIBUTE_STRING store
usb: dwc3: core: Fix system suspend on TI AM62 platforms
xhci: tegra: fix checked USB2 port number
usb: dwc3: Wait for EndXfer completion before restoring GUSB2PHYCFG
usb: typec: qcom-pmic-typec: fix sink status being overwritten with RP_DEF
usb: typec: altmode should keep reference to parent
MAINTAINERS: usb: raw-gadget: add bug tracker link
MAINTAINERS: Add an entry for the LJCA drivers
Pull x86 fixes from Borislav Petkov:
- Explicitly disable the TSC deadline timer when going idle to address
some CPU errata in that area
- Do not apply the Zenbleed fix on anything else except AMD Zen2 on the
late microcode loading path
- Clear CPU buffers later in the NMI exit path on 32-bit to avoid
register clearing while they still contain sensitive data, for the
RDFS mitigation
- Do not clobber EFLAGS.ZF with VERW on the opportunistic SYSRET exit
path on 32-bit
- Fix parsing issues of memory bandwidth specification in sysfs for
resctrl's memory bandwidth allocation feature
- Other small cleanups and improvements
* tag 'x86_urgent_for_v6.12_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Always explicitly disarm TSC-deadline timer
x86/CPU/AMD: Only apply Zenbleed fix for Zen2 during late microcode load
x86/bugs: Use code segment selector for VERW operand
x86/entry_32: Clear CPU buffers after register restore in NMI return
x86/entry_32: Do not clobber user EFLAGS.ZF
x86/resctrl: Annotate get_mem_config() functions as __init
x86/resctrl: Avoid overflow in MB settings in bw_validate()
x86/amd_nb: Add new PCI ID for AMD family 1Ah model 20h
Pull irq fixes from Borislav Petkov:
- Fix a case for sifive-plic where an interrupt gets disabled *and*
masked and remains masked when it gets reenabled later
- Plug a small race in GIC-v4 where userspace can force an affinity
change of a virtual CPU (vPE) in its unmapping path
- Do not mix the two sets of ocelot irqchip's registers in the mask
calculation of the main interrupt sticky register
- Other smaller fixlets and cleanups
* tag 'irq_urgent_for_v6.12_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/renesas-rzg2l: Fix missing put_device
irqchip/riscv-intc: Fix SMP=n boot with ACPI
irqchip/sifive-plic: Unmask interrupt in plic_irq_enable()
irqchip/gic-v4: Don't allow a VMOVP on a dying VPE
irqchip/sifive-plic: Return error code on failure
irqchip/riscv-imsic: Fix output text of base address
irqchip/ocelot: Comment sticky register clearing code
irqchip/ocelot: Fix trigger register address
irqchip: Remove obsolete config ARM_GIC_V3_ITS_PCI
Pull scheduling fixes from Borislav Petkov:
- Add PREEMPT_RT maintainers
- Fix another aspect of delayed dequeued tasks wrt determining their
state, i.e., whether they're runnable or blocked
- Handle delayed dequeued tasks and their migration wrt PSI properly
- Fix the situation where a delayed dequeue task gets enqueued into a
new class, which should not happen
- Fix a case where memory allocation would happen while the runqueue
lock is held, which is a no-no
- Do not over-schedule when tasks with shorter slices preempt the
currently running task
- Make sure delayed to deque entities are properly handled before
unthrottling
- Other smaller cleanups and improvements
* tag 'sched_urgent_for_v6.12_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Add an entry for PREEMPT_RT.
sched/fair: Fix external p->on_rq users
sched/psi: Fix mistaken CPU pressure indication after corrupted task state bug
sched/core: Dequeue PSI signals for blocked tasks that are delayed
sched: Fix delayed_dequeue vs switched_from_fair()
sched/core: Disable page allocation in task_tick_mm_cid()
sched/deadline: Use hrtick_enabled_dl() before start_hrtick_dl()
sched/eevdf: Fix wakeup-preempt by checking cfs_rq->nr_running
sched: Fix sched_delayed vs cfs_bandwidth
Pull xen fix from Juergen Gross:
"A single fix for a build failure introduced this merge window"
* tag 'for-linus-6.12a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Remove dependency between pciback and privcmd
Pull dma-mapping fix from Christoph Hellwig:
"Just another small tracing fix from Sean"
* tag 'dma-mapping-6.12-2024-10-20' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: fix tracing dma_alloc/free with vmalloc'd memory
Pull one more io_uring fix from Jens Axboe:
"Fix for a regression introduced in 6.12-rc2, where a condition check
was negated and hence -EAGAIN would bubble back up up to userspace
rather than trigger a retry condition"
* tag 'io_uring-6.12-20241019' of git://git.kernel.dk/linux:
io_uring/rw: fix wrong NOWAIT check in io_rw_init_file()
Pull SCSI fixes from James Bottomley:
"Fixes all in drivers. The largest is the mpi3mr which corrects a phy
count limit that should only apply to the controller but was being
incorrectly applied to expander phys"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: core: Fix null-ptr-deref in target_alloc_device()
scsi: mpi3mr: Validate SAS port assignments
scsi: ufs: core: Set SDEV_OFFLINE when UFS is shut down
scsi: ufs: core: Requeue aborted request
scsi: ufs: core: Fix the issue of ICU failure
Pull ftrace fixes from Steven Rostedt:
"A couple of fixes to function graph infrastructure:
- Fix allocation of idle shadow stack allocation during hotplug
If function graph tracing is started when a CPU is offline, if it
were come online during the trace then the idle task that
represents the CPU will not get a shadow stack allocated for it.
This means all function graph hooks that happen while that idle
task is running (including in interrupt mode) will have all its
events dropped.
Switch over to the CPU hotplug mechanism that will have any newly
brought on line CPU get a callback that can allocate the shadow
stack for its idle task.
- Fix allocation size of the ret_stack_list array
When function graph tracing converted over to allowing more than
one user at a time, it had to convert its shadow stack from an
array of ret_stack structures to an array of unsigned longs. The
shadow stacks are allocated in batches of 32 at a time and assigned
to every running task. The batch is held by the ret_stack_list
array.
But when the conversion happened, instead of allocating an array of
32 pointers, it was allocated as a ret_stack itself (PAGE_SIZE).
This ret_stack_list gets passed to a function that iterates over
what it believes is its size defined by the
FTRACE_RETSTACK_ALLOC_SIZE macro (which is 32).
Luckily (PAGE_SIZE) is greater than 32 * sizeof(long), otherwise
this would have been an array overflow. This still should be fixed
and the ret_stack_list should be allocated to the size it is
expected to be as someday it may end up being bigger than
SHADOW_STACK_SIZE"
* tag 'ftrace-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fgraph: Allocate ret_stack_list with proper size
fgraph: Use CPU hotplug mechanism to initialize idle shadow stacks
Pull ipe fixes from Fan Wu:
"This addresses several issues identified by Luca when attempting to
enable IPE on Debian and systemd:
- address issues with IPE policy update errors and policy update
version check, improving the clarity of error messages for better
understanding by userspace programs.
- enable IPE policies to be signed by secondary and platform
keyrings, facilitating broader use across general Linux
distributions like Debian.
- updates the IPE entry in the MAINTAINERS file to reflect the new
tree URL and my updated email from kernel.org"
* tag 'ipe-pr-20241018' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe:
MAINTAINERS: update IPE tree url and Fan Wu's email
ipe: fallback to platform keyring also if key in trusted keyring is rejected
ipe: allow secondary and platform keyrings to install/update policies
ipe: also reject policy updates with the same version
ipe: return -ESTALE instead of -EINVAL on update when new policy has a lower version
Pull input fixes from Dmitry Torokhov:
- a fix for Zinitix driver to not fail probing if the property enabling
touch keys functionality is not defined. Support for touch keys was
added in 6.12 merge window so this issue does not affect users of
released kernels
- a couple new vendor/device IDs in xpad driver to enable support for
more hardware
* tag 'input-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: zinitix - don't fail if linux,keycodes prop is absent
Input: xpad - add support for MSI Claw A1M
Input: xpad - add support for 8BitDo Ultimate 2C Wireless Controller
Pull 9p fixes from Dominique Martinet:
"Mashed-up update that I sat on too long:
- fix for multiple slabs created with the same name
- enable multipage folios
- theorical fix to also look for opened fids by inode if none was
found by dentry"
[ Enabling multi-page folios should have been done during the merge
window, but it's a one-liner, and the actual meat of the enablement
is in netfs and already in use for other filesystems... - Linus ]
* tag '9p-for-6.12-rc4' of https://github.com/martinetd/linux:
9p: Avoid creating multiple slab caches with the same name
9p: Enable multipage folios
9p: v9fs_fid_find: also lookup by inode if not found dentry
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Fix several issues with the 'rustc-option' macro. It includes a
refactor from Masahiro of three '{cc,rust}-*' macros, which is not
a fix but avoids repeating the same commands (which would be
several lines in the case of 'rustc-option').
- Fix conditions for 'CONFIG_HAVE_CFI_ICALL_NORMALIZE_INTEGERS'. It
includes the addition of 'CONFIG_RUSTC_LLVM_VERSION', which is not
a fix but is needed for the actual fix.
And a trivial grammar fix"
* tag 'rust-fixes-6.12-2' of https://github.com/Rust-for-Linux/linux:
cfi: fix conditions for HAVE_CFI_ICALL_NORMALIZE_INTEGERS
kbuild: rust: add `CONFIG_RUSTC_LLVM_VERSION`
kbuild: fix issues with rustc-option
kbuild: refactor cc-option-yn, cc-disable-warning, rust-option-yn macros
lib/Kconfig.debug: fix grammar in RUST_BUILD_ASSERT_ALLOW
A previous commit improved how !FMODE_NOWAIT is dealt with, but
inadvertently negated a check whilst doing so. This caused -EAGAIN to be
returned from reading files with O_NONBLOCK set. Fix up the check for
REQ_F_SUPPORT_NOWAIT.
Reported-by: Julian Orth <ju.orth@gmail.com>
Link: https://github.com/axboe/liburing/issues/1270
Fixes: f7c9134385 ("io_uring/rw: allow pollable non-blocking attempts for !FMODE_NOWAIT")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
