This patch defines the original in-kernel netlink path manager as a
new struct mptcp_pm_ops named "mptcp_pm_kernel", and register it in
mptcp_pm_kernel_register(). And define the userspace path manager as
a new struct mptcp_pm_ops named "mptcp_pm_userspace", and register it
in mptcp_pm_init().
To ensure that there's always a valid path manager available, the default
path manager "mptcp_pm_kernel" will be skipped in mptcp_pm_unregister().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250313-net-next-mptcp-pm-ops-intro-v1-7-f4e4a88efc50@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In order to allow users to develop their own BPF-based path manager,
this patch defines a struct ops "mptcp_pm_ops" for an MPTCP path
manager, which contains a set of interfaces. Currently only init()
and release() interfaces are included, subsequent patches will add
others step by step.
Add a set of functions to register, unregister, find and validate a
given path manager struct ops.
"list" is used to add this path manager to mptcp_pm_list list when
it is registered. "name" is used to identify this path manager.
mptcp_pm_find() uses "name" to find a path manager on the list.
mptcp_pm_unregister is not used in this set, but will be invoked in
.unreg of struct bpf_struct_ops. mptcp_pm_validate() will be invoked
in .validate of struct bpf_struct_ops. That's why they are exported.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250313-net-next-mptcp-pm-ops-intro-v1-6-f4e4a88efc50@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With the device instance lock, there is now a possibility of a deadlock:
[ 1.211455] ============================================
[ 1.211571] WARNING: possible recursive locking detected
[ 1.211687] 6.14.0-rc5-01215-g032756b4ca7a-dirty #5 Not tainted
[ 1.211823] --------------------------------------------
[ 1.211936] ip/184 is trying to acquire lock:
[ 1.212032] ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_set_allmulti+0x4e/0xb0
[ 1.212207]
[ 1.212207] but task is already holding lock:
[ 1.212332] ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_open+0x50/0xb0
[ 1.212487]
[ 1.212487] other info that might help us debug this:
[ 1.212626] Possible unsafe locking scenario:
[ 1.212626]
[ 1.212751] CPU0
[ 1.212815] ----
[ 1.212871] lock(&dev->lock);
[ 1.212944] lock(&dev->lock);
[ 1.213016]
[ 1.213016] *** DEADLOCK ***
[ 1.213016]
[ 1.213143] May be due to missing lock nesting notation
[ 1.213143]
[ 1.213294] 3 locks held by ip/184:
[ 1.213371] #0: ffffffff838b53e0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock+0x1b/0xa0
[ 1.213543] #1: ffffffff84e5fc70 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock+0x37/0xa0
[ 1.213727] #2: ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_open+0x50/0xb0
[ 1.213895]
[ 1.213895] stack backtrace:
[ 1.213991] CPU: 0 UID: 0 PID: 184 Comm: ip Not tainted 6.14.0-rc5-01215-g032756b4ca7a-dirty #5
[ 1.213993] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 1.213994] Call Trace:
[ 1.213995] <TASK>
[ 1.213996] dump_stack_lvl+0x8e/0xd0
[ 1.214000] print_deadlock_bug+0x28b/0x2a0
[ 1.214020] lock_acquire+0xea/0x2a0
[ 1.214027] __mutex_lock+0xbf/0xd40
[ 1.214038] dev_set_allmulti+0x4e/0xb0 # real_dev->flags & IFF_ALLMULTI
[ 1.214040] vlan_dev_open+0xa5/0x170 # ndo_open on vlandev
[ 1.214042] __dev_open+0x145/0x270
[ 1.214046] __dev_change_flags+0xb0/0x1e0
[ 1.214051] netif_change_flags+0x22/0x60 # IFF_UP vlandev
[ 1.214053] dev_change_flags+0x61/0xb0 # for each device in group from dev->vlan_info
[ 1.214055] vlan_device_event+0x766/0x7c0 # on netdevsim0
[ 1.214058] notifier_call_chain+0x78/0x120
[ 1.214062] netif_open+0x6d/0x90
[ 1.214064] dev_open+0x5b/0xb0 # locks netdevsim0
[ 1.214066] bond_enslave+0x64c/0x1230
[ 1.214075] do_set_master+0x175/0x1e0 # on netdevsim0
[ 1.214077] do_setlink+0x516/0x13b0
[ 1.214094] rtnl_newlink+0xaba/0xb80
[ 1.214132] rtnetlink_rcv_msg+0x440/0x490
[ 1.214144] netlink_rcv_skb+0xeb/0x120
[ 1.214150] netlink_unicast+0x1f9/0x320
[ 1.214153] netlink_sendmsg+0x346/0x3f0
[ 1.214157] __sock_sendmsg+0x86/0xb0
[ 1.214160] ____sys_sendmsg+0x1c8/0x220
[ 1.214164] ___sys_sendmsg+0x28f/0x2d0
[ 1.214179] __x64_sys_sendmsg+0xef/0x140
[ 1.214184] do_syscall_64+0xec/0x1d0
[ 1.214190] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 1.214191] RIP: 0033:0x7f2d1b4a7e56
Device setup:
netdevsim0 (down)
^ ^
bond netdevsim1.100@netdevsim1 allmulticast=on (down)
When we enslave the lower device (netdevsim0) which has a vlan, we
propagate vlan's allmuti/promisc flags during ndo_open. This causes
(re)locking on of the real_dev.
Propagate allmulti/promisc on flags change, not on the open. There
is a slight semantics change that vlans that are down now propagate
the flags, but this seems unlikely to result in the real issues.
Reproducer:
echo 0 1 > /sys/bus/netdevsim/new_device
dev_path=$(ls -d /sys/bus/netdevsim/devices/netdevsim0/net/*)
dev=$(echo $dev_path | rev | cut -d/ -f1 | rev)
ip link set dev $dev name netdevsim0
ip link set dev netdevsim0 up
ip link add link netdevsim0 name netdevsim0.100 type vlan id 100
ip link set dev netdevsim0.100 allmulticast on down
ip link add name bond1 type bond mode 802.3ad
ip link set dev netdevsim0 down
ip link set dev netdevsim0 master bond1
ip link set dev bond1 up
ip link show
Reported-by: syzbot+b0c03d76056ef6cd12a6@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/Z9CfXjLMKn6VLG5d@mini-arch/T/#m15ba130f53227c883e79fb969687d69d670337a0
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250313100657.2287455-1-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jacob Keller says:
====================
net: ptp: fix egregious supported flag checks
In preparation for adding .supported_extts_flags and
.supported_perout_flags to the ptp_clock_info structure, fix a couple of
places where drivers get existing flag gets grossly incorrect.
The igb driver claims 82580 supports strictly validating PTP_RISING_EDGE
and PTP_FALLING_EDGE, but doesn't actually check the flags. Fix the driver
to require that the request match both edges, as this is implied by the
datasheet description.
The renesas driver also claims to support strict flag checking, but does
not actually check the flags either. I do not have the data sheet for this
device, so I do not know what edge it timestamps. For simplicity, just
reject all requests with PTP_STRICT_FLAGS. This essentially prevents the
PTP_EXTTS_REQUEST2 ioctl from working. Updating to correctly validate the
flags will require someone who has the hardware to confirm the behavior.
The lan743x driver supports (and strictly validates) that the request is
either PTP_RISING_EDGE or PTP_FALLING_EDGE but not both. However, it does
not check the flags are one of the known valid flags. Thus, requests for
PTP_EXT_OFF (and any future flag) will be accepted and misinterpreted. Add
the appropriate check to reject unsupported PTP_EXT_OFF requests and future
proof against new flags.
The broadcom PHY driver checks that PTP_PEROUT_PHASE is not set. This
appears to be an attempt at rejecting unsupported flags. It is not robust
against flag additions such as the PTP_PEROUT_ONE_SHOT, or anything added
in the future. Fix this by instead checking against the negation of the
supported PTP_PEROUT_DUTY_CYCLE instead.
The ptp_ocp driver supports PTP_PEROUT_PHASE and PTP_PEROUT_DUTY_CYCLE, but
does not check unsupported flags. Add the appropriate check to ensure
PTP_PEROUT_ONE_SHOT and any future flags are rejected as unsupported.
These are changes compile-tested, but I do not have hardware to validate the
behavior.
There are a number of other drivers which enable periodic output or
external timestamp requests, but which do not check flags at all. We could
go through each of these drivers one-by-one and meticulously add a flag
check. Instead, these drivers will be covered only by the upcoming
.supported_extts_flags and .supported_perout_flags checks in a net-next
series.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
====================
Link: https://patch.msgid.link/20250312-jk-net-fixes-supported-extts-flags-v2-0-ea930ba82459@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In bcm_ptp_perout_locked, the driver rejects requests which have
PTP_PEROUT_PHASE set. This appears to be an attempt to reject any
unsupported flags. Unfortunately, this only checks one flag, but does not
protect against PTP_PEROUT_ONE_SHOT, or any future flags which may be
added.
Fix the check to ensure that no flag other than the supported
PTP_PEROUT_DUTY_CYCLE is set.
Fixes: 7bfe91efd5 ("net: phy: Add support for 1PPS out and external timestamps")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312-jk-net-fixes-supported-extts-flags-v2-4-ea930ba82459@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The lan743x_ptp_io_event_cap_en() function checks that the given request
sets only one of PTP_RISING_EDGE or PTP_FALLING_EDGE, but not both.
However, this driver does not check whether other flags (such as
PTP_EXT_OFF) are set, nor whether any future unrecognized flags are set.
Fix this by adding the appropriate check to the lan743x_ptp_io_extts()
function.
Fixes: 60942c397a ("net: lan743x: Add support for PTP-IO Event Input External Timestamp (extts)")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312-jk-net-fixes-supported-extts-flags-v2-3-ea930ba82459@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ravb_ptp_extts() function checks the flags coming from the
PTP_EXTTS_REQUEST ioctl, to ensure that future flags are not accepted on
accident.
This was updated to 'honor' the PTP_STRICT_FLAGS in commit 6138e687c7
("ptp: Introduce strict checking of external time stamp options.").
However, the driver does not *actually* validate the flags.
I originally fixed this driver to reject future flags in commit
592025a03b ("renesas: reject unsupported external timestamp flags"). It
is still unclear whether this hardware timestamps the rising, falling, or
both edges of the input signal.
Accepting requests with PTP_STRICT_FLAGS is a bug, as this could lead to
users mistakenly assuming a request with PTP_RISING_EDGE actually
timestamps the rising edge only.
Reject requests with PTP_STRICT_FLAGS (and hence all PTP_EXTTS_REQUEST2
requests) until someone with access to the datasheet or hardware knowledge
can confirm the timestamping behavior and update this driver.
Fixes: 6138e687c7 ("ptp: Introduce strict checking of external time stamp options.")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312-jk-net-fixes-supported-extts-flags-v2-2-ea930ba82459@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The igb_ptp_feature_enable_82580 function correctly checks that unknown
flags are not passed to the function. However, it does not actually check
PTP_RISING_EDGE or PTP_FALLING_EDGE when configuring the external timestamp
function.
The data sheet for the 82580 product says:
Upon a change in the input level of one of the SDP pins that was
configured to detect Time stamp events using the TSSDP register, a time
stamp of the system time is captured into one of the two auxiliary time
stamp registers (AUXSTMPL/H0 or AUXSTMPL/H1).
For example to define timestamping of events in the AUXSTMPL0 and
AUXSTMPH0 registers, Software should:
1. Set the TSSDP.AUX0_SDP_SEL field to select the SDP pin that detects
the level change and set the TSSDP.AUX0_TS_SDP_EN bit to 1.
2. Set the TSAUXC.EN_TS0 bit to 1 to enable timestamping
The same paragraph is in the i350 and i354 data sheets.
The wording implies that the time stamps are captured at any level change.
There does not appear to be any way to only timestamp one edge of the
signal.
Reject requests which do not set both PTP_RISING_EDGE and PTP_FALLING_EDGE
when operating under PTP_STRICT_FLAGS mode via PTP_EXTTS_REQUEST2.
Fixes: 38970eac41 ("igb: support EXTTS on 82580/i354/i350")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312-jk-net-fixes-supported-extts-flags-v2-1-ea930ba82459@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Gerhard Engleder says:
====================
Support loopback mode speed selection
Previously to commit 6ff3cddc36 ("net: phylib: do not disable autoneg
for fixed speeds >= 1G") it was possible to select the speed of the
loopback mode by configuring a fixed speed before enabling the loopback
mode. Now autoneg is always enabled for >= 1G and a fixed speed of >= 1G
requires successful autoneg. Thus, the speed of the loopback mode depends
on the link partner for >= 1G. There is no technical reason to depend on
the link partner for loopback mode. With this behavior the loopback mode
is less useful for testing.
Allow PHYs to support optional speed selection for the loopback mode.
This support is implemented for the generic loopback support and for PHY
drivers, which obviously support speed selection for loopback mode.
Additionally, loopback support according to the data sheet is added to
the KSZ9031 PHY.
Extend phy_loopback() to signal link up and down if speed changes,
because a new link speed requires link up signalling.
Use this loopback speed selection in the tsnep driver to select the
loopback mode speed depending the previously active speed. User space
tests with 100 Mbps and 1 Gbps loopback are possible again.
====================
Link: https://patch.msgid.link/20250312203010.47429-1-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
phy_loopback() leaves it to the PHY driver to select the speed of the
loopback mode. Thus, the speed of the loopback mode depends on the PHY
driver in use.
Add support for speed selection to phy_loopback() to enable loopback
with defined speeds. Ensure that link up is signaled if speed changes
as speed is not allowed to change during link up. Link down and up is
necessary for a new speed.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://patch.msgid.link/20250312203010.47429-3-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
PHY drivers support loopback mode, but it is not possible to select the
speed of the loopback mode. The speed is chosen by the set_loopback()
operation of the PHY driver. Same is valid for genphy_loopback().
There are PHYs that support loopback with different speeds. Extend
set_loopback() to make loopback speed selection possible.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250312203010.47429-2-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a character array without a terminating NUL character has a static
initializer, GCC 15's -Wunterminated-string-initialization will only
warn if the array lacks the "nonstring" attribute[1]. Mark the arrays
with __nonstring to correctly identify the char array as "not a C string"
and thereby eliminate the warning:
In file included from ../drivers/net/ethernet/cadence/macb_main.c:42:
../drivers/net/ethernet/cadence/macb.h:1070:35: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
1070 | GEM_STAT_TITLE(TX1519CNT, "tx_greater_than_1518_byte_frames"),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ethernet/cadence/macb.h:1050:24: note: in definition of macro 'GEM_STAT_TITLE_BITS'
1050 | .stat_string = title, \
| ^~~~~
../drivers/net/ethernet/cadence/macb.h:1070:9: note: in expansion of macro 'GEM_STAT_TITLE'
1070 | GEM_STAT_TITLE(TX1519CNT, "tx_greater_than_1518_byte_frames"),
| ^~~~~~~~~~~~~~
../drivers/net/ethernet/cadence/macb.h:1097:35: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
1097 | GEM_STAT_TITLE(RX1519CNT, "rx_greater_than_1518_byte_frames"),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ethernet/cadence/macb.h:1050:24: note: in definition of macro 'GEM_STAT_TITLE_BITS'
1050 | .stat_string = title, \
| ^~~~~
../drivers/net/ethernet/cadence/macb.h:1097:9: note: in expansion of macro 'GEM_STAT_TITLE'
1097 | GEM_STAT_TITLE(RX1519CNT, "rx_greater_than_1518_byte_frames"),
| ^~~~~~~~~~~~~~
Since these strings are copied with memcpy() they do not need to be
NUL terminated, and can use __nonstring:
memcpy(p, gem_statistics[i].stat_string,
ETH_GSTRING_LEN);
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=117178 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250312200700.make.521-kees@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, netconsole has two methods of configuration - module
parameter and configfs. The former interface allows for netconsole
activation earlier during boot (by specifying the module parameter on
the kernel command line), so it is preferred for debugging issues which
arise before userspace is up/the configfs interface can be used. The
module parameter syntax requires specifying the egress interface name.
This requirement makes it hard to use for a couple reasons:
- The egress interface name can be hard or impossible to predict. For
example, installing a new network card in a system can change the
interface names assigned by the kernel.
- When constructing the module parameter, one may have trouble
determining the original (kernel-assigned) name of the interface
(which is the name that should be given to netconsole) if some stable
interface naming scheme is in effect. A human can usually look at
kernel logs to determine the original name, but this is very painful
if automation is constructing the parameter.
For these reasons, allow selection of the egress interface via MAC
address when configuring netconsole using the module parameter. Update
the netconsole documentation with an example of the new syntax.
Selection of egress interface by MAC address via configfs is far less
interesting (since when this interface can be used, one should be able
to easily convert between MAC address and interface name), so it is left
unimplemented.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Tested-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312-netconsole-v6-2-3437933e79b8@purestorage.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Before tc's recent change to fix rounding errors, several tests which
specified a burst size of "1m" would translate back to being 1048574
bytes (2b less than 1Mb). sprint_size prints this as "1024Kb".
With the tc fix, the burst size is instead correctly reported as
1048576 bytes (precisely 1Mb), which sprint_size prints as "1Mb".
This updates the expected output in the tests' matchPattern values
to accept either the old or the new output.
Signed-off-by: Jonathan Lennox <jonathan.lennox@8x8.com>
Link: https://patch.msgid.link/20250312174804.313107-1-jonathan.lennox@8x8.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The DWMAC 1000 DMA capabilities register does not provide actual
FIFO sizes, nor does the driver really care. If they are not
provided via some other means, the driver will work fine, only
disallowing changing the MTU setting.
Provide the FIFO sizes through the driver's platform data to enable
MTU changes. The FIFO sizes are confirmed to be the same across RK3288,
RK3328, RK3399 and PX30, based on their respective manuals. It is
likely that Rockchip synthesized their DWMAC 1000 with the same
parameters on all their chips that have it.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250312163426.2178314-1-wens@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tariq Toukan says:
====================
net/mlx5: HW Steering cleanups
This short series by Yevgeny contains several small HW Steering cleanups:
- Patch 1: removing unused FW commands
- Patch 2: using list_move() instead of list_del/add
- Patch 3: printing the unsupported combination of match fields
====================
Link: https://patch.msgid.link/1741780194-137519-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Russell King says:
====================
net: stmmac: deprecate "snps,en-tx-lpi-clockgating" property
This series deprecates the "snps,en-tx-lpi-clockgating" property for
stmmac.
MII Transmit clock gating, where the MAC hardware supports gating this
clock, is a function of the connected PHY capabilities, which it
reports through its status register.
GMAC versions that support transmit clock gating twiddle the LPITCSE
bit accordingly in the LPI control/status register, which is handled
by the GMAC core specific code.
So, "snps,en-tx-lpi-clockgating" not something that is a GMAC property,
but is a work-around for phylib not providing an interface to determine
whether the PHY allows the transmit clock to be disabled.
This series converts the two SoCs that make use of this property (which,
I hasten to add, is set in the SoC code) to use the PHY capability bit
instead of a DT property, then removes the DT property from the .dtsi,
deprecates it in the snps,dwmac binding, and finally in the stmmac code.
I am expecting some discussion on how to merge this, as I think the
order in which these changes is made is important - we don't want to
deprecate the old way until the new code has landed.
====================
Link: https://patch.msgid.link/Z9FVHEf3uUqtKzyt@shell.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Whether the MII transmit clock can be stopped is primarily a property
of the PHY (there is a capability bit that should be checked first.)
Whether the MAC is capable of stopping the transmit clock is a separate
issue, but this is already handled by the core DesignWare MAC code.
Therefore, snps,en-tx-lpi-clockgating is technically incorrect, and
this commit adds a warning should a DT be encountered with the property
present.
However, we keep backwards compatibility.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/E1tsIUK-005vGk-H7@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Whether the MII transmit clock can be stopped is primarily a property
of the PHY (there is a capability bit that should be checked first.)
Whether the MAC is capable of stopping the transmit clock is a separate
issue, but this is already handled by the core DesignWare MAC code.
Therefore, snps,en-tx-lpi-clockgating is technically incorrect, so this
commit deprecates the property in the binding.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsIUF-005vGd-C5@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Whether the MII transmit clock can be stopped is primarily a property
of the PHY (there is a capability bit that should be checked first.)
Whether the MAC is capable of stopping the transmit clock is a separate
issue, but this is already handled by the core DesignWare MAC code.
As commit "net: stmmac: stm32: use PHY capability for TX clock stop"
adds the flag to use the PHY capability, remove the DT property that is
now unecessary.
Cc: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsIUA-005vGX-8A@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Whether the MII transmit clock can be stopped is primarily a property
of the PHY (there is a capability bit that should be checked first.)
Whether the MAC is capable of stopping the transmit clock is a separate
issue, but this is already handled by the core DesignWare MAC code.
As commit "net: stmmac: starfive: use PHY capability for TX clock stop"
adds the flag to use the PHY capability, remove the DT property that is
now unecessary.
Cc: Samin Guo <samin.guo@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsIU5-005vGR-4c@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Whether the MII transmit clock can be stopped is primarily a property
of the PHY (there is a capability bit that should be checked first.)
Whether the MAC is capable of stopping the transmit clock is a separate
issue, but this is already handled by the core DesignWare MAC code.
Add the flag to allow the stmmac core to use the PHY capability.
Cc: Christophe Roullier <christophe.roullier@st.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsIU0-005vGL-17@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Whether the MII transmit clock can be stopped is primarily a property
of the PHY (there is a capability bit that should be checked first.)
Whether the MAC is capable of stopping the transmit clock is a separate
issue, but this is already handled by the core DesignWare MAC code.
Add the flag to allow the stmmac core to use the PHY capability.
Cc: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsITu-005vGF-TM@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stefan Schmidt says:
====================
pull-request: ieee802154-next 2025-03-10
An update from ieee802154 for your *net-next* tree:
Andy Shevchenko reworked the ca8210 driver to use the gpiod API and fixed
a few problems of the driver along the way.
* tag 'ieee802154-for-net-next-2025-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan-next:
dt-bindings: ieee802154: ca8210: Update polarity of the reset pin
ieee802154: ca8210: Switch to using gpiod API
ieee802154: ca8210: Get platform data via dev_get_platdata()
ieee802154: ca8210: Use proper setters and getters for bitwise types
====================
Link: https://patch.msgid.link/20250310185752.2683890-1-stefan@datenfreihafen.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Russell King says:
====================
net: stmmac: remove unnecessary of_get_phy_mode() calls
This series removes unnecessary of_get_phy_mode() calls from the stmmac
glue drivers. stmmac_probe_config_dt() / devm_stmmac_probe_config_dt()
already gets the interface mode using device_get_phy_mode() and stores
it in plat_dat->phy_interface.
Therefore, glue drivers using of_get_phy_mode() are just duplicating
the work that has already been done.
This series adjusts the glue drivers to remove their usage of
of_get_phy_mode().
====================
Link: https://patch.msgid.link/Z9FQjQZb0IMaQJ9H@shell.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
devm_stmmac_probe_config_dt() already gets the PHY mode from firmware,
which is stored in plat_dat->phy_interface. Therefore, we don't need to
get it in platform code.
sun8i was using of_get_phy_mode() to set plat_dat->mac_interface, which
defaults to plat_dat->phy_interface when the mac-mode DT property is
not present. As nothing in arch/*/boot/dts sets the mac-mode property,
it is highly likely that these two will be identical, and thus there
is no need for this glue driver to set plat_dat->mac_interface.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsIGs-005v09-CD@rmk-PC.armlinux.org.uk
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
