ip_send_unicast_reply() send orphaned 'control packets'.
These are RST packets and also ACK packets sent from TIME_WAIT.
Some eBPF programs would prefer to have a meaningful skb->sk
pointer as much as possible.
This means that TCP can now attach TIME_WAIT sockets to outgoing
skbs.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Brian Vazquez <brianvv@google.com>
Link: https://patch.msgid.link/20241010174817.1543642-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_v6_send_response() send orphaned 'control packets'.
These are RST packets and also ACK packets sent from TIME_WAIT.
Some eBPF programs would prefer to have a meaningful skb->sk
pointer as much as possible.
This means that TCP can now attach TIME_WAIT sockets to outgoing
skbs.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Brian Vazquez <brianvv@google.com>
Link: https://patch.msgid.link/20241010174817.1543642-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TCP stack is not attaching skb to TIME_WAIT sockets yet,
but we would like to allow this in the future.
Add sk_listener_or_tw() helper to detect the three states
that FQ needs to take care.
Like NEW_SYN_RECV, TIME_WAIT are not full sockets and
do not contain sk->sk_pacing_status, sk->sk_pacing_rate.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Brian Vazquez <brianvv@google.com>
Link: https://patch.msgid.link/20241010174817.1543642-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Address byte-order miss-matches flagged by Sparse.
In tg3_load_firmware_cpu() and tg3_get_device_address()
this is done using appropriate types to store big endian values.
In the cases of tg3_test_nvram(), where buf is an array which
contains values of several different types, cast to __le32
before converting values to host byte order.
Reported by Sparse as:
.../tg3.c:3745:34: warning: cast to restricted __be32
.../tg3.c:13096:21: warning: cast to restricted __le32
.../tg3.c:13096:21: warning: cast from restricted __be32
.../tg3.c:13101:21: warning: cast to restricted __le32
.../tg3.c:13101:21: warning: cast from restricted __be32
.../tg3.c:17070:63: warning: incorrect type in argument 3 (different base types)
.../tg3.c:17070:63: expected restricted __be32 [usertype] *val
.../tg3.c:17070:63: got unsigned int *
dr.../tg3.c:17071:63: warning: incorrect type in argument 3 (different base types)
.../tg3.c:17071:63: expected restricted __be32 [usertype] *val
.../tg3.c:17071:63: got unsigned int *
Also, address white-space issues on lines modified for the above.
And, for consistency, lines adjacent to them.
Compile tested only.
No functional change intended.
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241009-tg3-sparse-v1-1-6af38a7bf4ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon Horman says:
====================
net: ethernet: ti: Address some warnings
This patchset addresses some warnings flagged by Sparse, and clang-18 in
TI Ethernet drivers.
Although these changes do not alter the functionality of the code, by
addressing them real problems introduced in future which are flagged by
tooling will stand out more readily.
Compile tested only.
---
Changes in v2:
- Dropped patch to directly address __percpu Sparse warnings and, instead
- Add patch to use tstats
- Added tags
- Thanks to all for the review of v1
- Link to v1: https://lore.kernel.org/r/20240910-ti-warn-v1-0-afd1e404abbe@kernel.org
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
W=1 builds flag that some accessor functions for ALE fields are unused.
Address this by splitting up the macros used to define these
accessors to allow only those that are used to be declared.
The warnings are verbose, but for example, the mcast_state case is
flagged by clang-18 as:
.../cpsw_ale.c:220:1: warning: unused function 'cpsw_ale_get_mcast_state' [-Wunused-function]
220 | DEFINE_ALE_FIELD(mcast_state, 62, 2)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.../cpsw_ale.c:145:19: note: expanded from macro 'DEFINE_ALE_FIELD'
145 | static inline int cpsw_ale_get_##name(u32 *ale_entry) \
| ^~~~~~~~~~~~~~~~~~~
<scratch space>:196:1: note: expanded from here
196 | cpsw_ale_get_mcast_state
| ^~~~~~~~~~~~~~~~~~~~~~~~
Compile tested only.
No functional change intended.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make use of struct pcpu_sw_netstats and related helpers to handle
existing per-cpu stats for this driver - the exact same counters
are maintained.
A side effect of this change is to address __percpu warnings
flagged by Sparse:
.../am65-cpsw-nuss.c:2658:55: warning: incorrect type in initializer (different address spaces)
.../am65-cpsw-nuss.c:2658:55: expected struct am65_cpsw_ndev_stats [noderef] __percpu *stats
.../am65-cpsw-nuss.c:2658:55: got void *data
.../am65-cpsw-nuss.c:2781:15: warning: incorrect type in argument 3 (different address spaces)
.../am65-cpsw-nuss.c:2781:15: expected void *data
.../am65-cpsw-nuss.c:2781:15: got struct am65_cpsw_ndev_stats [noderef] __percpu *stats
Compile tested only.
No functional change intended.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/all/20240911170643.7ecb1bbb@kernel.org/
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The id_temp local variable in am65_cpsw_nuss_probe() is
used to hold a 64-bit big-endian value as it is assigned using
cpu_to_be64().
It is read using memcpy(), where it is written as an identifier into a
byte-array. So this can also be treated as big endian.
As it's type is currently host byte order (u64), sparse flags
an endian mismatch when compiling for little-endian systems:
.../am65-cpsw-nuss.c:3454:17: warning: incorrect type in assignment (different base types)
.../am65-cpsw-nuss.c:3454:17: expected unsigned long long [usertype] id_temp
.../am65-cpsw-nuss.c:3454:17: got restricted __be64 [usertype]
Address this by using __be64 as the type of id_temp.
No functional change intended.
Compile tested only.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to problem reports in the past SG and TSO/TSO6 are disabled per
default. It's not fully clear which chip versions are affected, so we
may impact also users of unaffected chip versions, unless they know
how to use ethtool for enabling SG/TSO/TSO6.
Vendor drivers r8168/r8125 enable SG/TSO/TSO6 for selected chip
versions per default, I'd interpret this as confirmation that these
chip versions are unaffected. So let's do the same here.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
del_timer() and del_timer_sync() have been renamed to timer_delete()
and timer_delete_sync().
Inconsistent API usage makes the code a bit confusing, so replace with
the new APIs.
No functional changes intended.
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Danielle Ratson says:
====================
ethtool: Add support for writing firmware
In the CMIS specification for pluggable modules, LPL (Local Payload) and
EPL (Extended Payload) are two types of data payloads used for managing
various functions and features of the module.
EPL payloads are used for more complex and extensive management functions
that require a larger amount of data, so writing firmware blocks using EPL
is much more efficient.
Currently, only LPL payload is supported for writing firmware blocks to
the module.
Add support for writing firmware block using EPL payload, both to support
modules that support only EPL write mechanism, and to optimize the flashing
process of modules that support LPL and EPL.
Running the flashing command on the same sample module using EPL vs. LPL
showed an improvement of 84%.
Patchset overview:
Patch #1: preparations
Patch #2: Add EPL support
v5: Resending- no changes.
v4: Resending the right version after wrong v3.
No changes from v2.
v2:
* Fix the commit meassges to align the cover letter about the
right meaning of LPL and EPL.
Patch #2:
* Initialize the variable 'bytes_written' before the first
iteration.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In the CMIS specification for pluggable modules, LPL (Local Payload) and
EPL (Extended Payload) are two types of data payloads used for managing
various functions and features of the module.
EPL payloads are used for more complex and extensive management
functions that require a larger amount of data, so writing firmware
blocks using EPL is much more efficient.
Currently, only LPL payload is supported for writing firmware blocks to
the module.
Add support for writing firmware block using EPL payload, both to
support modules that supports only EPL write mechanism, and to optimize
the flashing process of modules that support LPL and EPL.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the CMIS specification for pluggable modules, LPL (Local Payload) and
EPL (Extended Payload) are two types of data payloads used for managing
various functions and features of the module.
EPL payloads are used for more complex and extensive management
functions that require a larger amount of data, so writing firmware
blocks using EPL is much more efficient.
Currently, only LPL payload is supported for writing firmware blocks to
the module.
Add EPL related parameters to the function ethtool_cmis_cdb_compose_args()
and add a specific function for calculating the maximum allowable length
extension for EPL. Both will be used in the next patch to add support for
writing firmware blocks using EPL.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Menglong Dong says:
====================
net: vxlan: add skb drop reasons support
In this series, we add skb drop reasons support to VXLAN, and following
new skb drop reasons are introduced:
SKB_DROP_REASON_VXLAN_INVALID_HDR
SKB_DROP_REASON_VXLAN_VNI_NOT_FOUND
SKB_DROP_REASON_VXLAN_ENTRY_EXISTS
SKB_DROP_REASON_VXLAN_NO_REMOTE
SKB_DROP_REASON_MAC_INVALID_SOURCE
SKB_DROP_REASON_IP_TUNNEL_ECN
SKB_DROP_REASON_TUNNEL_TXINFO
SKB_DROP_REASON_LOCAL_MAC
We add some helper functions in this series, who will capture the drop
reasons from pskb_may_pull_reason and return them:
pskb_network_may_pull_reason()
pskb_inet_may_pull_reason()
And we also make the following functions return skb drop reasons:
skb_vlan_inet_prepare()
vxlan_remcsum()
vxlan_snoop()
vxlan_set_mac()
Changes since v6:
- fix some typos in the document for SKB_DROP_REASON_TUNNEL_TXINFO
Changes since v5:
- fix some typos in the document for SKB_DROP_REASON_TUNNEL_TXINFO
Changes since v4:
- make skb_vlan_inet_prepare() return drop reasons, instead of introduce
a wrapper for it in the 3rd patch.
- modify the document for SKB_DROP_REASON_LOCAL_MAC and
SKB_DROP_REASON_TUNNEL_TXINFO.
Changes since v3:
- rename SKB_DROP_REASON_VXLAN_INVALID_SMAC to
SKB_DROP_REASON_MAC_INVALID_SOURCE in the 6th patch
Changes since v2:
- move all the drop reasons of VXLAN to the "core", instead of introducing
the VXLAN drop reason subsystem
- add the 6th patch, which capture the drop reasons from vxlan_snoop()
- move the commits for vxlan_remcsum() and vxlan_set_mac() after
vxlan_rcv() to update the call of them accordingly
- fix some format problems
Changes since v1:
- document all the drop reasons that we introduce
- rename the drop reasons to make them more descriptive, as Ido advised
- remove the 2nd patch, which introduce the SKB_DR_RESET
- add the 4th patch, which adds skb_vlan_inet_prepare_reason() helper
- introduce the 6th patch, which make vxlan_set_mac return drop reasons
- introduce the 10th patch, which uses VXLAN_DROP_NO_REMOTE as the drop
reasons, as Ido advised
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb with kfree_skb_reason in vxlan_encap_bypass, and no new
skb drop reason is added in this commit.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() with kfree_skb_reason() in vxlan_mdb_xmit. No drop
reasons are introduced in this commit.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb/dev_kfree_skb with kfree_skb_reason in vxlan_xmit_one.
No drop reasons are introduced in this commit.
The only concern of mine is replacing dev_kfree_skb with
kfree_skb_reason. The dev_kfree_skb is equal to consume_skb, and I'm not
sure if we can change it to kfree_skb here. In my option, the skb is
"dropped" here, isn't it?
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() with kfree_skb_reason() in vxlan_xmit(). Following
new skb drop reasons are introduced for vxlan:
/* no remote found for xmit */
SKB_DROP_REASON_VXLAN_NO_REMOTE
/* packet without necessary metadata reached a device which is
* in "external" mode
*/
SKB_DROP_REASON_TUNNEL_TXINFO
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the return type of vxlan_set_mac() from bool to enum
skb_drop_reason. In this commit, the drop reason
"SKB_DROP_REASON_LOCAL_MAC" is introduced for the case that the source
mac of the packet is a local mac.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the return type of vxlan_snoop() from bool to enum
skb_drop_reason. In this commit, two drop reasons are introduced:
SKB_DROP_REASON_MAC_INVALID_SOURCE
SKB_DROP_REASON_VXLAN_ENTRY_EXISTS
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make vxlan_remcsum() support skb drop reasons by changing the return
value type of it from bool to enum skb_drop_reason.
The only drop reason in vxlan_remcsum() comes from pskb_may_pull_reason(),
so we just return it.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce skb drop reasons to the function vxlan_rcv(). Following new
drop reasons are added:
SKB_DROP_REASON_VXLAN_INVALID_HDR
SKB_DROP_REASON_VXLAN_VNI_NOT_FOUND
SKB_DROP_REASON_IP_TUNNEL_ECN
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make skb_vlan_inet_prepare return the skb drop reasons, which is just
what pskb_may_pull_reason() returns. Meanwhile, adjust all the call of
it.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce the function pskb_inet_may_pull_reason() and make
pskb_inet_may_pull a simple inline call to it. The drop reasons of it just
come from pskb_may_pull_reason().
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce the function pskb_network_may_pull_reason() and make
pskb_network_may_pull() a simple inline call to it. The drop reasons of
it just come from pskb_may_pull_reason.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parthiban Veerasooran says:
====================
microchip_t1s: Update on Microchip 10BASE-T1S PHY driver
This patch series contain the below updates:
- Restructured lan865x_write_cfg_params() and lan865x_read_cfg_params()
functions arguments to more generic.
- Updated new/improved initial settings of LAN865X Rev.B0 from latest
AN1760.
- Added support for LAN865X Rev.B1 from latest AN1760.
- Moved LAN867X reset handling to a new function for flexibility.
- Added support for LAN867X Rev.C1/C2 from latest AN1699.
- Disabled/enabled collision detection based on PLCA setting.
====================
Link: https://patch.msgid.link/20241010082205.221493-1-parthiban.veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As per LAN8650/1 Rev.B0/B1 AN1760 (Revision F (DS60001760G - June 2024))
and LAN8670/1/2 Rev.C1/C2 AN1699 (Revision E (DS60001699F - June 2024)),
under normal operation, the device should be operated in PLCA mode.
Disabling collision detection is recommended to allow the device to
operate in noisy environments or when reflections and other inherent
transmission line distortion cause poor signal quality. Collision
detection must be re-enabled if the device is configured to operate in
CSMA/CD mode.
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Link: https://patch.msgid.link/20241010082205.221493-8-parthiban.veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hangbin Liu says:
====================
netdevsim: better ipsec output format
The first 2 patches improve the netdevsim ipsec debug output with better
format. The 3rd patch update the selftests.
v2: update rtnetlink selftest with new output format (Stanislav Fomichev, Jakub Kicinski)
====================
Link: https://patch.msgid.link/20241010040027.21440-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current code only copies the address for the in path, leaving the out
path address set to 0. This patch corrects the issue by copying the addresses
for both the in and out paths. Before this patch:
# cat /sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec
SA count=2 tx=20
sa[0] tx ipaddr=0.0.0.0
sa[0] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1
sa[0] key=0x3167608a ca4f1397 43565909 941fa627
sa[1] rx ipaddr=192.168.0.1
sa[1] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1
sa[1] key=0x3167608a ca4f1397 43565909 941fa627
After this patch:
= cat /sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec
SA count=2 tx=20
sa[0] tx ipaddr=192.168.0.2
sa[0] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1
sa[0] key=0x3167608a ca4f1397 43565909 941fa627
sa[1] rx ipaddr=192.168.0.1
sa[1] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1
sa[1] key=0x3167608a ca4f1397 43565909 941fa627
Fixes: 7699353da8 ("netdevsim: add ipsec offload testing")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20241010040027.21440-3-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Radhey Shyam Pandey says:
====================
net: xilinx: emaclite: Adopt clock support
This patchset adds emaclite clock support. AXI Ethernet Lite IP can also
be used on SoC platforms like Zynq UltraScale+ MPSoC which combines
powerful processing system (PS) and user-programmable logic (PL) into
the same device. On these platforms it is mandatory to explicitly enable
IP clocks for proper functionality.
====================
Link: https://patch.msgid.link/1728491303-1456171-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add s_axi_aclk AXI4 clock support. Traditionally this IP was used on
microblaze platforms which had fixed clocks enabled all the time. But
since its a PL IP, it can also be used on SoC platforms like Zynq
UltraScale+ MPSoC which combines processing system (PS) and user
programmable logic (PL) into the same device. On these platforms instead
of fixed enabled clocks it is mandatory to explicitly enable IP clocks
for proper functionality.
So make clock a required property and also define max supported clock
constraints.
Signed-off-by: Abin Joseph <abin.joseph@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/1728491303-1456171-2-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
