The GT-King and GT-King-Pro boxes have an RTC chip and power cell, so enable it.
GTKING:~ # dmesg | grep rtc
[ 5.237245] meson-vrtc ff8000a8.rtc: registered as rtc1
[ 5.261869] rtc-hym8563 0-0051: registered as rtc0
[ 5.265016] rtc-hym8563 0-0051: setting system clock to 2020-11-30T09:16:54 UTC (1606727814)
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20201201062135.18241-1-christianshewitt@gmail.com
According to the datasheet (Rev. 1.9) the RTL8211F requires at least
72ms "for internal circuits settling time" before accessing the PHY
registers. This fixes an issue seen on ODROID-C2 where the Ethernet
link doesn't come up when using ip link set down/up:
[ 6630.714855] meson8b-dwmac c9410000.ethernet eth0: Link is Down
[ 6630.785775] meson8b-dwmac c9410000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=36)
[ 6630.893071] meson8b-dwmac c9410000.ethernet: Failed to reset the dma
[ 6630.893800] meson8b-dwmac c9410000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
[ 6630.902835] meson8b-dwmac c9410000.ethernet eth0: stmmac_open: Hw setup failed
Fixes: f29cabf240 ("arm64: dts: meson: use the generic Ethernet PHY reset GPIO bindings")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/4a322c198b86e4c8b3dda015560a683babea4d63.1607363522.git.stefan@agner.ch
According to the datasheet (Rev. 1.9) the RTL8211F requires at least
72ms "for internal circuits settling time" before accessing the PHY
registers. This fixes an issue where the Ethernet link doesn't come up
when using ip link set down/up:
[ 29.360965] meson8b-dwmac ff3f0000.ethernet eth0: Link is Down
[ 34.569012] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=31)
[ 34.676732] meson8b-dwmac ff3f0000.ethernet: Failed to reset the dma
[ 34.678874] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
[ 34.687850] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_open: Hw setup failed
Fixes: 658e4129bb ("arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY reset line")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/df3f5c4fc6e43c55429fd3662a636036a21eed49.1607363522.git.stefan@agner.ch
Tweak the node name to make it aliasable, then add aliases for the
on-board RTC chip and meson-vrtc timer so they probe as rtc0 and
rtc1 respectively.
before:
VIM3:~ # dmesg | grep rtc
[ 3.622530] meson-vrtc ff8000a8.rtc: registered as rtc0
[ 3.622574] meson-vrtc ff8000a8.rtc: setting system clock to 1970-01-01T00:00:03 UTC (3)
[ 3.646936] rtc-hym8563 0-0051: no valid clock/calendar values available
[ 3.647125] rtc-hym8563 0-0051: registered as rtc1
[ 3.852382] rtc-hym8563 0-0051: no valid clock/calendar values available
after:
VIM3:~ # dmesg | grep rtc
[ 3.583735] meson-vrtc ff8000a8.rtc: registered as rtc1
[ 3.633888] rtc-hym8563 0-0051: no valid clock/calendar values available
[ 3.634120] rtc-hym8563 0-0051: registered as rtc0
[ 3.635250] rtc-hym8563 0-0051: no valid clock/calendar values available
[ 3.635267] rtc-hym8563 0-0051: hctosys: unable to read the hardware clock
[ 3.852632] rtc-hym8563 0-0051: no valid clock/calendar values available
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20201124145338.17137-1-christianshewitt@gmail.com
GXM (S912) is a big-little design with CPUs 0-3 clocked at 1.5GHz
and CPUs 4-7 at 1.0GHz. Adding capacity-dmips-mhz attributes allows
the scheduler to factor the different clock speeds into capacity
calculations and prefer the higher-clocked cluster to improve
overall performance.
This was inspired by the similar change for G12B [0] boards. The
diference here is that all cores are A53's so the same dmips-mhz
value is used.
VIM2:~ # cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_cur_freq
1512000
1512000
1512000
1512000
1000000
1000000
1000000
1000000
before:
VIM2:~ # cat /sys/devices/system/cpu/cpu*/cpu_capacity
1024
1024
1024
1024
1024
1024
1024
1024
after:
VIM2:~ # cat /sys/devices/system/cpu/cpu*/cpu_capacity
1024
1024
1024
1024
677
677
677
677
The after value matches my table-napkin calculation:
(1000000 / 1512000 = 0.661) * 1024 = 677
[0] 6eeaf4d245
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20201124121740.25704-1-christianshewitt@gmail.com
Enable the rtc node on VIM1/VIM2 boards so users can simply attach a power
cell and use the on-board RTC without modifying the device-tree.
Cold boot with no cell attached is gracefully handled:
VIM2:~ # dmesg | grep rtc
[ 7.716150] rtc-hym8563 1-0051: no valid clock/calendar values available
[ 7.716957] rtc-hym8563 1-0051: registered as rtc0
[ 7.729850] rtc-hym8563 1-0051: no valid clock/calendar values available
[ 7.729877] rtc-hym8563 1-0051: hctosys: unable to read the hardware clock
[ 8.126768] rtc-hym8563 1-0051: no valid clock/calendar values available
Warm boot (and any boot with cell attached) recalls stored values resulting
in consistently faster (re)boot times:
VIM2:~ # dmesg | grep rtc
[ 7.441671] rtc-hym8563 1-0051: registered as rtc0
[ 7.442663] rtc-hym8563 1-0051: setting system clock to 2020-11-16T05:49:59 UTC (1605505799)
Suggested-by: Artem Lapkin <art@khadas.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20201116064147.12062-1-christianshewitt@gmail.com
tid_addr is not a "pointer to (pointer to int in userspace)"; it is in
fact a "pointer to (pointer to int in userspace) in userspace". So
sparse rightfully complains about passing a kernel pointer to
put_user().
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 453431a549 ("mm, treewide: rename kzfree() to
kfree_sensitive()") renamed kzfree() to kfree_sensitive(),
but it left a compatibility definition of kzfree() to avoid
being too disruptive.
Since then a few more instances of kzfree() have slipped in.
Just get rid of them and remove the compatibility definition
once and for all.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull timer fixes from Thomas Gleixner:
"A time namespace fix and a matching selftest. The futex absolute
timeouts which are based on CLOCK_MONOTONIC require time namespace
corrected. This was missed in the original time namesapce support"
* tag 'timers-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/timens: Add a test for futex()
futex: Adjust absolute futex timeouts with per time namespace offset
Pull scheduler fixes from Thomas Gleixner:
"Two scheduler fixes:
- A trivial build fix for sched_feat() to compile correctly with
CONFIG_JUMP_LABEL=n
- Replace a zero lenght array with a flexible array"
* tag 'sched-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/features: Fix !CONFIG_JUMP_LABEL case
sched: Replace zero-length array with flexible-array
Pull perf fix from Thomas Gleixner:
"A single fix to compute the field offset of the SNOOPX bit in the data
source bitmask of perf events correctly"
* tag 'perf-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: correct SNOOPX field offset
Pull locking fix from Thomas Gleixner:
"Just a trivial fix for kernel-doc warnings"
* tag 'locking-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/seqlocks: Fix kernel-doc warnings
Pull NTB fixes from Jon Mason.
* tag 'ntb-5.10' of git://github.com/jonmason/ntb:
NTB: Use struct_size() helper in devm_kzalloc()
ntb: intel: Fix memleak in intel_ntb_pci_probe
NTB: hw: amd: fix an issue about leak system resources
Pull i2c fix from Wolfram Sang:
"Regression fix for rc1 and stable kernels as well"
* 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs
Pull more cifs updates from Steve French:
"Add support for stat of various special file types (WSL reparse points
for char, block, fifo)"
* tag '5.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number
smb3: add some missing definitions from MS-FSCC
smb3: remove two unused variables
smb3: add support for stat of WSL reparse points for special file types
Pull more parisc updates from Helge Deller:
- During this merge window O_NONBLOCK was changed to become 000200000,
but we missed that the syscalls timerfd_create(), signalfd4(),
eventfd2(), pipe2(), inotify_init1() and userfaultfd() do a strict
bit-wise check of the flags parameter.
To provide backward compatibility with existing userspace we
introduce parisc specific wrappers for those syscalls which filter
out the old O_NONBLOCK value and replaces it with the new one.
- Prevent HIL bus driver to get stuck when keyboard or mouse isn't
attached
- Improve error return codes when setting rtc time
- Minor documentation fix in pata_ns87415.c
* 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
ata: pata_ns87415.c: Document support on parisc with superio chip
parisc: Add wrapper syscalls to fix O_NONBLOCK flag usage
hil/parisc: Disable HIL driver when it gets stuck
parisc: Improve error return codes when setting rtc time
Pull more xen updates from Juergen Gross:
- a series for the Xen pv block drivers adding module parameters for
better control of resource usge
- a cleanup series for the Xen event driver
* tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Documentation: add xen.fifo_events kernel parameter description
xen/events: unmask a fifo event channel only if it was masked
xen/events: only register debug interrupt for 2-level events
xen/events: make struct irq_info private to events_base.c
xen: remove no longer used functions
xen-blkfront: Apply changed parameter name to the document
xen-blkfront: add a parameter for disabling of persistent grants
xen-blkback: add a parameter for disabling of persistent grants
Pull SafeSetID updates from Micah Morton:
"The changes are mostly contained to within the SafeSetID LSM, with the
exception of a few 1-line changes to change some ns_capable() calls to
ns_capable_setid() -- causing a flag (CAP_OPT_INSETID) to be set that
is examined by SafeSetID code and nothing else in the kernel.
The changes to SafeSetID internally allow for setting up GID
transition security policies, as already existed for UIDs"
* tag 'safesetid-5.10' of git://github.com/micah-morton/linux:
LSM: SafeSetID: Fix warnings reported by test bot
LSM: SafeSetID: Add GID security policy handling
LSM: Signal to SafeSetID when setting group IDs
Pull random32 updates from Willy Tarreau:
"Make prandom_u32() less predictable.
This is the cleanup of the latest series of prandom_u32
experimentations consisting in using SipHash instead of Tausworthe to
produce the randoms used by the network stack.
The changes to the files were kept minimal, and the controversial
commit that used to take noise from the fast_pool (f227e3ec3b) was
reverted. Instead, a dedicated "net_rand_noise" per_cpu variable is
fed from various sources of activities (networking, scheduling) to
perturb the SipHash state using fast, non-trivially predictable data,
instead of keeping it fully deterministic. The goal is essentially to
make any occasional memory leakage or brute-force attempt useless.
The resulting code was verified to be very slightly faster on x86_64
than what is was with the controversial commit above, though this
remains barely above measurement noise. It was also tested on i386 and
arm, and build- tested only on arm64"
Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/
* tag '20201024-v4-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wtarreau/prandom:
random32: add a selftest for the prandom32 code
random32: add noise from network and scheduling activity
random32: make prandom_u32() output unpredictable
Commit 21653a4181 ("i2c: core: Call i2c_acpi_install_space_handler()
before i2c_acpi_register_devices()")'s intention was to only move the
acpi_install_address_space_handler() call to the point before where
the ACPI declared i2c-children of the adapter where instantiated by
i2c_acpi_register_devices().
But i2c_acpi_install_space_handler() had a call to
acpi_walk_dep_device_list() hidden (that is I missed it) at the end
of it, so as an unwanted side-effect now acpi_walk_dep_device_list()
was also being called before i2c_acpi_register_devices().
Move the acpi_walk_dep_device_list() call to the end of
i2c_acpi_register_devices(), so that it is once again called *after*
the i2c_client-s hanging of the adapter have been created.
This fixes the Microsoft Surface Go 2 hanging at boot.
Fixes: 21653a4181 ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209627
Reported-by: Rainer Finke <rainer@finke.cc>
Reported-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Suggested-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph
- rdma error handling fixes (Chao Leng)
- fc error handling and reconnect fixes (James Smart)
- fix the qid displace when tracing ioctl command (Keith Busch)
- don't use BLK_MQ_REQ_NOWAIT for passthru (Chaitanya Kulkarni)
- fix MTDT for passthru (Logan Gunthorpe)
- blacklist Write Same on more devices (Kai-Heng Feng)
- fix an uninitialized work struct (zhenwei pi)"
- lightnvm out-of-bounds fix (Colin)
- SG allocation leak fix (Doug)
- rnbd fixes (Gioh, Guoqing, Jack)
- zone error translation fixes (Keith)
- kerneldoc markup fix (Mauro)
- zram lockdep fix (Peter)
- Kill unused io_context members (Yufen)
- NUMA memory allocation cleanup (Xianting)
- NBD config wakeup fix (Xiubo)
* tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-block: (27 commits)
block: blk-mq: fix a kernel-doc markup
nvme-fc: shorten reconnect delay if possible for FC
nvme-fc: wait for queues to freeze before calling update_hr_hw_queues
nvme-fc: fix error loop in create_hw_io_queues
nvme-fc: fix io timeout to abort I/O
null_blk: use zone status for max active/open
nvmet: don't use BLK_MQ_REQ_NOWAIT for passthru
nvmet: cleanup nvmet_passthru_map_sg()
nvmet: limit passthru MTDS by BIO_MAX_PAGES
nvmet: fix uninitialized work for zero kato
nvme-pci: disable Write Zeroes on Sandisk Skyhawk
nvme: use queuedata for nvme_req_qid
nvme-rdma: fix crash due to incorrect cqe
nvme-rdma: fix crash when connect rejected
block: remove unused members for io_context
blk-mq: remove the calling of local_memory_node()
zram: Fix __zram_bvec_{read,write}() locking order
skd_main: remove unused including <linux/version.h>
sgl_alloc_order: fix memory leak
lightnvm: fix out-of-bounds write to array devices->info[]
...
