As of commit cb18cd2603 ("ASoC: soc-core: do rtd->id trick at
snd_soc_add_pcm_runtime()") the ID stored in the PCM runtime data can
no longer be safely used to index the priv->dai_props array. This is
because the ID may be modified during snd_soc_add_pcm_runtime(), thus
resulting in an ID that's no longer a valid array index.
To fix this, use the position of the dai_link stored inside the PCM
runtime data relative to the start of the dai_link array as index into
the priv->dai_props array.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20250114184314.3583-2-laurentiumihalcea111@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no audio output if Speaker volume is set above 25.
According to datasheet Rev 2.5 maximum allowed value for the
Speaker output is 0b11001 (25)
0x6D CLASSD_GAIN_1/ 0x6E CLASSD_GAIN_2:
Left/Right Channel Class-D Driver Gain For DAC Left/Right
Input
(Step size is 1dB.)
00000 = Mute (DEFAULT)
00001 = 0dB
00002 = 1dB
...
11000 = 23dB
11001 = 24dB
So adjust this value in accordance with the datasheet.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Link: https://patch.msgid.link/20241219042227.7075-1-fido_max@inbox.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
On Chromebooks based on Mediatek MT8195 or MT8188, the audio frontend
(AFE) is limited to accessing a very small window (1 MiB) of memory,
which is described as a reserved memory region in the device tree.
On these two platforms, the maximum buffer size is given as 512 KiB.
The MediaTek common code uses the same value for preallocations. This
means that only the first two PCM substreams get preallocations, and
then the whole space is exhausted, barring any other substreams from
working. Since the substreams used are not always the first two, this
means audio won't work correctly.
This is observed on the MT8188 Geralt Chromebooks, on which the
"mediatek,dai-link" property was dropped when it was upstreamed. That
property causes the driver to only register the PCM substreams listed
in the property, and in the order given.
Instead of trying to compute an optimal value and figuring out which
streams are used, simply disable preallocation. The PCM buffers are
managed by the core and are allocated and released on the fly. There
should be no impact to any of the other MediaTek platforms.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20241219105303.548437-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
The DMI match information for these models has changed so the match
entries need updates.
Pull EFI fixes from Ard Biesheuvel:
- Limit EFI zboot to GZIP and ZSTD before it comes in wider use
- Fix inconsistent error when looking up a non-existent file in
efivarfs with a name that does not adhere to the NAME-GUID format
- Drop some unused code
* tag 'efi-fixes-for-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/esrt: remove esre_attribute::store()
efivarfs: Fix error on non-existent file
efi/zboot: Limit compression options to GZIP and ZSTD
Pull i2c fixes from Wolfram Sang:
"i2c host fixes: PNX used the wrong unit for timeouts, Nomadik was
missing a sentinel, and RIIC was missing rounding up"
* tag 'i2c-for-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: riic: Always round-up when calculating bus period
i2c: nomadik: Add missing sentinel to match table
i2c: pnx: Fix timeout in wait functions
Pull EDAC fix from Borislav Petkov:
- Make sure amd64_edac loads successfully on certain Zen4 memory
configurations
* tag 'edac_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Simplify ECC check on unified memory controllers
Pull irq fixes from Borislav Petkov:
- Disable the secure programming interface of the GIC500 chip in the
RK3399 SoC to fix interrupt priority assignment and even make a dead
machine boot again when the gic-v3 driver enables pseudo NMIs
- Correct the declaration of a percpu variable to fix several sparse
warnings
* tag 'irq_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3: Work around insecure GIC integrations
irqchip/gic: Correct declaration of *percpu_base pointer in union gic_base
Pull scheduler fixes from Borislav Petkov:
- Prevent incorrect dequeueing of the deadline dlserver helper task and
fix its time accounting
- Properly track the CFS runqueue runnable stats
- Check the total number of all queued tasks in a sched fair's runqueue
hierarchy before deciding to stop the tick
- Fix the scheduling of the task that got woken last (NEXT_BUDDY) by
preventing those from being delayed
* tag 'sched_urgent_for_v6.13_rc3-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/dlserver: Fix dlserver time accounting
sched/dlserver: Fix dlserver double enqueue
sched/eevdf: More PELT vs DELAYED_DEQUEUE
sched/fair: Fix sched_can_stop_tick() for fair tasks
sched/fair: Fix NEXT_BUDDY
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix confusion with implicitly-shifted MDCR_EL2 masks breaking
SPE/TRBE initialization
- Align nested page table walker with the intended memory attribute
combining rules of the architecture
- Prevent userspace from constraining the advertised ASID width,
avoiding horrors of guest TLBIs not matching the intended context
in hardware
- Don't leak references on LPIs when insertion into the translation
cache fails
RISC-V:
- Replace csr_write() with csr_set() for HVIEN PMU overflow bit
x86:
- Cache CPUID.0xD XSTATE offsets+sizes during module init
On Intel's Emerald Rapids CPUID costs hundreds of cycles and there
are a lot of leaves under 0xD. Getting rid of the CPUIDs during
nested VM-Enter and VM-Exit is planned for the next release, for
now just cache them: even on Skylake that is 40% faster"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Cache CPUID.0xD XSTATE offsets+sizes during module init
RISC-V: KVM: Fix csr_write -> csr_set for HVIEN PMU overflow bit
KVM: arm64: vgic-its: Add error handling in vgic_its_cache_translation
KVM: arm64: Do not allow ID_AA64MMFR0_EL1.ASIDbits to be overridden
KVM: arm64: Fix S1/S2 combination when FWB==1 and S2 has Device memory type
arm64: Fix usage of new shifted MDCR_EL2 values
Pull SCSI fix from James Bottomley:
"Single one-line fix in the ufs driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Update compl_time_stamp_local_clock after completing a cqe
Pull bpf fixes from Daniel Borkmann:
- Fix a bug in the BPF verifier to track changes to packet data
property for global functions (Eduard Zingerman)
- Fix a theoretical BPF prog_array use-after-free in RCU handling of
__uprobe_perf_func (Jann Horn)
- Fix BPF tracing to have an explicit list of tracepoints and their
arguments which need to be annotated as PTR_MAYBE_NULL (Kumar
Kartikeya Dwivedi)
- Fix a logic bug in the bpf_remove_insns code where a potential error
would have been wrongly propagated (Anton Protopopov)
- Avoid deadlock scenarios caused by nested kprobe and fentry BPF
programs (Priya Bala Govindasamy)
- Fix a bug in BPF verifier which was missing a size check for
BTF-based context access (Kumar Kartikeya Dwivedi)
- Fix a crash found by syzbot through an invalid BPF prog_array access
in perf_event_detach_bpf_prog (Jiri Olsa)
- Fix several BPF sockmap bugs including a race causing a refcount
imbalance upon element replace (Michal Luczaj)
- Fix a use-after-free from mismatching BPF program/attachment RCU
flavors (Jann Horn)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (23 commits)
bpf: Avoid deadlock caused by nested kprobe and fentry bpf programs
selftests/bpf: Add tests for raw_tp NULL args
bpf: Augment raw_tp arguments with PTR_MAYBE_NULL
bpf: Revert "bpf: Mark raw_tp arguments with PTR_MAYBE_NULL"
selftests/bpf: Add test for narrow ctx load for pointer args
bpf: Check size for BTF-based ctx access of pointer members
selftests/bpf: extend changes_pkt_data with cases w/o subprograms
bpf: fix null dereference when computing changes_pkt_data of prog w/o subprogs
bpf: Fix theoretical prog_array UAF in __uprobe_perf_func()
bpf: fix potential error return
selftests/bpf: validate that tail call invalidates packet pointers
bpf: consider that tail calls invalidate packet pointers
selftests/bpf: freplace tests for tracking of changes_packet_data
bpf: check changes_pkt_data property for extension programs
selftests/bpf: test for changing packet data from global functions
bpf: track changes_pkt_data property for global functions
bpf: refactor bpf_helper_changes_pkt_data to use helper number
bpf: add find_containing_subprog() utility function
bpf,perf: Fix invalid prog_array access in perf_event_detach_bpf_prog
bpf: Fix UAF via mismatching bpf_prog/attachment RCU flavors
...
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes for some reported issues.
Included in here are:
- typec driver bugfixes
- u_serial gadget driver bugfix for much reported and discussed issue
- dwc2 bugfixes
- midi gadget driver bugfix
- ehci-hcd driver bugfix
- other small bugfixes
All of these have been in linux-next for over a week with no reported
issues"
* tag 'usb-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix connector status writing past buffer size
usb: typec: ucsi: Fix completion notifications
usb: dwc2: Fix HCD port connection race
usb: dwc2: hcd: Fix GetPortStatus & SetPortFeature
usb: dwc2: Fix HCD resume
usb: gadget: u_serial: Fix the issue that gs_start_io crashed due to accessing null pointer
usb: misc: onboard_usb_dev: skip suspend/resume sequence for USB5744 SMBus support
usb: dwc3: xilinx: make sure pipe clock is deselected in usb2 only mode
usb: core: hcd: only check primary hcd skip_phy_initialization
usb: gadget: midi2: Fix interpretation of is_midi1 bits
usb: dwc3: imx8mp: fix software node kernel dump
usb: typec: anx7411: fix OF node reference leaks in anx7411_typec_switch_probe()
usb: typec: anx7411: fix fwnode_handle reference leak
usb: host: max3421-hcd: Correctly abort a USB request.
dt-bindings: phy: imx8mq-usb: correct reference to usb-switch.yaml
usb: ehci-hcd: fix call balance of clocks handling routines
Pull serial driver fixes from Greg KH:
"Here are two small serial driver fixes for 6.13-rc3. They are:
- ioport build fallout fix for the 8250 port driver that should
resolve Guenter's runtime problems
- sh-sci driver bugfix for a reported problem
Both of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial: Work around warning backtrace in serial8250_set_defaults
serial: sh-sci: Check if TX data was written to device in .tx_empty()
Pull staging driver fixes from Greg KH:
"Here are some small staging gpib driver build and bugfixes for issues
that have been much-reported (should finally fix Guenter's build
issues). There are more of these coming in later -rc releases, but for
now this should fix the majority of the reported problems.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: gpib: Fix i386 build issue
staging: gpib: Fix faulty workaround for assignment in if
staging: gpib: Workaround for ppc build failure
staging: gpib: Make GPIB_NI_PCI_ISA depend on HAS_IOPORT
Pull crypto fixes from Herbert Xu:
"Fix a regression in rsassa-pkcs1 as well as a buffer overrun in
hisilicon/debugfs"
* tag 'v6.13-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: hisilicon/debugfs - fix the struct pointer incorrectly offset problem
crypto: rsassa-pkcs1 - Copy source data for SG list
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Set bindgen's Rust target version to prevent issues when
pairing older rustc releases with newer bindgen releases,
such as bindgen >= 0.71.0 and rustc < 1.82 due to
unsafe_extern_blocks.
drm/panic:
- Remove spurious empty line detected by a new Clippy warning"
* tag 'rust-fixes-6.13' of https://github.com/Rust-for-Linux/linux:
rust: kbuild: set `bindgen`'s Rust target version
drm/panic: remove spurious empty line to clean warning
Pull iommu fixes from Joerg Roedel:
- Per-domain device-list locking fixes for the AMD IOMMU driver
- Fix incorrect use of smp_processor_id() in the NVidia-specific part
of the ARM-SMMU-v3 driver
- Intel IOMMU driver fixes:
- Remove cache tags before disabling ATS
- Avoid draining PRQ in sva mm release path
- Fix qi_batch NULL pointer with nested parent domain
* tag 'iommu-fixes-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/vt-d: Avoid draining PRQ in sva mm release path
iommu/vt-d: Fix qi_batch NULL pointer with nested parent domain
iommu/vt-d: Remove cache tags before disabling ATS
iommu/amd: Add lockdep asserts for domain->dev_list
iommu/amd: Put list_add/del(dev_data) back under the domain->lock
iommu/tegra241-cmdqv: do not use smp_processor_id in preemptible context
Pull ata fix from Damien Le Moal:
- Fix an OF node reference leak in the sata_highbank driver
* tag 'ata-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: sata_highbank: fix OF node reference leak in highbank_initialize_phys()
i2c-host-fixes for v6.13-rc3
- Replaced jiffies with msec for timeout calculations.
- Added a sentinel to the 'of_device_id' array in Nomadik.
- Rounded up bus period calculation in RIIC.
Pull smb client fixes from Steve French:
- fix rmmod leak
- two minor cleanups
- fix for unlink/rename with pending i/o
* tag '6.13-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: destroy cfid_put_wq on module exit
cifs: Use str_yes_no() helper in cifs_ses_add_channel()
cifs: Fix rmdir failure due to ongoing I/O on deleted file
smb3: fix compiler warning in reparse code
Pull spi fixes from Mark Brown:
"A few fairly small fixes for v6.13, the most substatial one being
disabling STIG mode for Cadence QSPI controllers on Altera SoCFPGA
platforms since it doesn't work"
* tag 'spi-fix-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-cadence-qspi: Disable STIG mode for Altera SoCFPGA.
spi: rockchip: Fix PM runtime count on no-op cs
spi: aspeed: Fix an error handling path in aspeed_spi_[read|write]_user()
Pull regulator fixes from Mark Brown:
"A couple of additional changes, one ensuring we give AXP717 enough
time to stabilise after changing voltages which fixes serious
stability issues on some platforms and another documenting the DT
support required for the Qualcomm WCN6750"
* tag 'regulator-fix-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: axp20x: AXP717: set ramp_delay
regulator: dt-bindings: qcom,qca6390-pmu: document wcn6750-pmu
Pull drm fixes from Dave Airlie:
"This is the weekly fixes pull for drm. Just has i915, xe and amdgpu
changes in it. Nothing too major in here:
i915:
- Don't use indexed register writes needlessly [dsb]
- Stop using non-posted DSB writes for legacy LUT [color]
- Fix NULL pointer dereference in capture_engine
- Fix memory leak by correcting cache object name in error handler
xe:
- Fix a KUNIT test error message (Mirsad Todorovac)
- Fix an invalidation fence PM ref leak (Daniele)
- Fix a register pool UAF (Lucas)
amdgpu:
- ISP hw init fix
- SR-IOV fixes
- Fix contiguous VRAM mapping for UVD on older GPUs
- Fix some regressions due to drm scheduler changes
- Workload profile fixes
- Cleaner shader fix
amdkfd:
- Fix DMA map direction for migration
- Fix a potential null pointer dereference
- Cacheline size fixes
- Runtime PM fix"
* tag 'drm-fixes-2024-12-14' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/reg_sr: Remove register pool
drm/xe: Call invalidation_fence_fini for PT inval fences in error state
drm/xe: fix the ERR_PTR() returned on failure to allocate tiny pt
drm/amdkfd: pause autosuspend when creating pdd
drm/amdgpu: fix when the cleaner shader is emitted
drm/amdgpu: Fix ISP HW init issue
drm/amdkfd: hard-code MALL cacheline size for gfx11, gfx12
drm/amdkfd: hard-code cacheline size for gfx11
drm/amdkfd: Dereference null return value
drm/i915: Fix memory leak by correcting cache object name in error handler
drm/i915: Fix NULL pointer dereference in capture_engine
drm/i915/color: Stop using non-posted DSB writes for legacy LUT
drm/i915/dsb: Don't use indexed register writes needlessly
drm/amdkfd: Correct the migration DMA map direction
drm/amd/pm: Set SMU v13.0.7 default workload type
drm/amd/pm: Initialize power profile mode
amdgpu/uvd: get ring reference from rq scheduler
drm/amdgpu: fix UVD contiguous CS mapping problem
drm/amdgpu: use sjt mec fw on gfx943 for sriov
Revert "drm/amdgpu: Fix ISP hw init issue"
Pull power management documentation fix from Rafael Wysocki:
"Fix a runtime PM documentation mistake that may mislead someone into
making a coding mistake (Paul Barker)"
* tag 'pm-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Documentation: PM: Clarify pm_runtime_resume_and_get() return value
Pull ACPI fixes from Rafael Wysocki:
"These fix two coding mistakes, one in the ACPI resources handling code
and one in ACPICA:
- Relocate the addr->info.mem.caching check in acpi_decode_space() to
only execute it if the resource is of the correct type (Ilpo
Järvinen)
- Don't release a context_mutex that was never acquired in
acpi_remove_address_space_handler() (Daniil Tatianin)"
* tag 'acpi-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: events/evxfregn: don't release the ContextMutex that was never acquired
ACPI: resource: Fix memory resource type union access
Kumar Kartikeya Dwivedi says:
====================
Explicit raw_tp NULL arguments
This set reverts the raw_tp masking changes introduced in commit
cb4158ce8e ("bpf: Mark raw_tp arguments with PTR_MAYBE_NULL") and
replaces it wwith an explicit list of tracepoints and their arguments
which need to be annotated as PTR_MAYBE_NULL. More context on the
fallout caused by the masking fix and subsequent discussions can be
found in [0].
To remedy this, we implement a solution of explicitly defined tracepoint
and define which args need to be marked NULL or scalar (for IS_ERR
case). The commit logs describes the details of this approach in detail.
We will follow up this solution an approach Eduard is working on to
perform automated analysis of NULL-ness of tracepoint arguments. The
current PoC is available here:
- LLVM branch with the analysis:
https://github.com/eddyz87/llvm-project/tree/nullness-for-tracepoint-params
- Python script for merging of analysis results:
https://gist.github.com/eddyz87/e47c164466a60e8d49e6911cff146f47
The idea is to infer a tri-state verdict for each tracepoint parameter:
definitely not null, can be null, unknown (in which case no assumptions
should be made).
Using this information, the verifier in most cases will be able to
precisely determine the state of the tracepoint parameter without any
human effort. At that point, the table maintained manually in this set
can be dropped and replace with this automated analysis tool's result.
This will be kept up to date with each kernel release.
[0]: https://lore.kernel.org/bpf/20241206161053.809580-1-memxor@gmail.com
Changelog:
----------
v2 -> v3:
v2: https://lore.kernel.org/bpf/20241213175127.2084759-1-memxor@gmail.com
* Address Eduard's nits, add Reviewed-by
v1 -> v2:
v1: https://lore.kernel.org/bpf/20241211020156.18966-1-memxor@gmail.com
* Address comments from Jiri
* Mark module tracepoints args NULL by default
* Add more sunrpc tracepoints
* Unify scalar or null handling
* Address comments from Alexei
* Use bitmask approach suggested in review
* Unify scalar or null handling
* Drop most tests that rely on CONFIG options
* Drop scripts to generate tests
====================
Link: https://patch.msgid.link/20241213221929.3495062-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
