While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled array, only its representation in
source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Vladimir Zapolskiy <vz@kernel.org>
Link: https://patch.msgid.link/20260519161300.1598095-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
While touching all these arrays, unify usage of whitespace in the list
terminator.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Richard Leitner <richard.leitner@linux.dev>
Link: https://patch.msgid.link/20260518135536.781168-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify usage of whitespace in the list
terminator.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260518110142.637215-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add an auxiliary-bus hwmon driver for the temperature sensor exposed by
AMD Promontory 21 (PROM21) xHCI PCI functions. The driver binds to the
"hwmon" auxiliary device published by the PROM21 xHCI PCI glue and
exposes the sensor as temp1_input under the prom21_xhci hwmon device.
The sensor is accessed through a PROM21 vendor index/data register pair
in the xHCI PCI MMIO BAR. The driver consumes parent-provided MMIO data
from the PROM21 PCI glue instead of inspecting the parent PCI driver's
drvdata. The read path restores the previous vendor index value after
sampling and does not runtime-resume the parent PCI device; reads from a
suspended parent return -ENODATA.
Document the supported device, register access, runtime PM behavior, and
sysfs lookup method. The documentation also records the observation
method used to identify the register pair and derive the conversion
formula.
Assisted-by: Codex:gpt-5.5
Signed-off-by: Jihong Min <hurryman2212@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Yaroslav Isakov <yaroslav.isakov@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20260519000732.2334711-3-hurryman2212@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
AMD Promontory 21 (PROM21) xHCI PCI functions use the common xhci-pci
core for USB operation, but also expose controller-specific sensor data.
Add a small PROM21 PCI glue driver for AMD 1022:43fc and 1022:43fd
controllers.
The glue delegates USB host operation to the common xhci-pci core and
publishes a "hwmon" auxiliary device with parent-provided MMIO data.
Auxiliary device creation failure is logged but does not fail the xHCI
probe.
Make the PROM21 glue a hidden Kconfig tristate driven by the user-visible
SENSORS_PROM21_XHCI option. If sensor support is disabled, generic
xhci-pci binds PROM21 controllers normally. If sensor support is enabled,
the glue follows USB_XHCI_PCI.
This keeps the auxiliary device available for a modular sensor driver while
avoiding a built-in xhci-pci core handing PROM21 controllers to a glue
driver that is only available as a module during initramfs.
Assisted-by: Codex:gpt-5.5
Signed-off-by: Jihong Min <hurryman2212@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Yaroslav Isakov <yaroslav.isakov@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20260519000732.2334711-2-hurryman2212@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kernel-doc comment for dwc3_alloc_event_buffers states that the
function "Allocates @num event buffers", but the function does not have
a @num parameter and only allocates a single event buffer.
Remove the misleading "@num" reference from the brief description to
accurately reflect the function's behavior.
Signed-off-by: Shuping Bu <bushuping007@163.com>
Link: https://patch.msgid.link/20260520055023.2415635-1-bushuping007@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull EDAC fix from Borislav Petkov:
- Fix a string leak in the versalnet driver
* tag 'edac_urgent_for_v7.1_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/versalnet: Fix device name memory leak
The DATA-packet handler in rxrpc_input_call_event() and the RESPONSE
handler in rxrpc_verify_response() copy the skb to a linear one before
calling into the security ops only when skb_cloned() is true. An skb
that is not cloned but still carries externally-owned paged fragments
(e.g. SKBFL_SHARED_FRAG set by splice() into a UDP socket via
__ip_append_data, or a chained skb_has_frag_list()) falls through to
the in-place decryption path, which binds the frag pages directly into
the AEAD/skcipher SGL via skb_to_sgvec().
Extend the gate to also unshare when skb_has_frag_list() or
skb_has_shared_frag() is true. This catches the splice-loopback vector
and other externally-shared frag sources while preserving the
zero-copy fast path for skbs whose frags are kernel-private (e.g. NIC
page_pool RX, GRO). The OOM/trace handling already in place is reused.
Fixes: d0d5c0cd1e ("rxrpc: Use skb_unshare() rather than skb_cow_data()")
Cc: stable@vger.kernel.org
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull clk driver fixes from Stephen Boyd:
- Mark the DDR bus clk critical in the SpaceMiT driver so that
boot doesn't fail
- Fix boot on Mobile EyeQ by creating the auxiliary device for
the ethernet PHY
- Plug an OF node leak in Rockchip rk808 clk driver
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: rk808: fix OF node reference imbalance
MAINTAINERS: add myself as a reviewer for the clk subsystem
reset: eyeq: drop device_set_of_node_from_dev() done by parent
clk: eyeq: add EyeQ5 children auxiliary device for generic PHYs
clk: eyeq: use the auxiliary device creation helper
clk: spacemit: k3: mark top_dclk as CLK_IS_CRITICAL
BPF_MAP_TYPE_ARENA accepts BPF_PSEUDO_MAP_VALUE offsets at exactly
the end of the arena mapping (off == arena_size). The boundary check
in arena_map_direct_value_addr() uses `>` instead of `>=`, which
incorrectly allows a one-past-end pointer to be accepted.
Change the condition to `>=` to correctly reject offsets that fall
outside the valid arena user_vm range.
Fixes: 317460317a ("bpf: Introduce bpf_arena.")
Signed-off-by: Junyoung Jang <graypanda.inzag@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260426172505.1947915-1-graypanda.inzag@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
XSKMAP entries are used as redirect targets for incoming XDP frames.
A TX-only AF_XDP socket lacks an Rx ring and cannot handle redirected
traffic, but xsk_map_update_elem() currently allows such sockets to
be inserted into the map.
Redirecting packets to such a socket on the veth generic-XDP path
causes a kernel crash in xsk_generic_rcv().
This became possible after xsk_is_setup_for_bpf_map() was removed from
the XSKMAP update path, which allowed bound TX-only sockets to be
inserted into the map.
Reject TX-only sockets during XSKMAP updates to avoid the crash.
They remain fully operational for pure Tx purposes outside XSKMAP.
Fixes: 968be23cea ("xsk: Fix possible segfault at xskmap entry insertion")
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yifan Wu <yifanwucs@gmail.com>
Signed-off-by: Linpu Yu <linpu5433@gmail.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20260508144344.694-1-linpu5433@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Because subprog 0, the main subprog, is considered a global function,
we end up running the arg-tracking dataflow analysis twice on it. That
results in slightly longer verification but mostly in more verbose
verifier logs. This patch fixes it by keeping only the iteration over
global subprogs.
When running over all of Cilium's programs with BPF_LOG_LEVEL2, this
reduces verbosity by ~20% on average.
Fixes: bf0c571f7f ("bpf: introduce forward arg-tracking dataflow analysis")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/e4d7b53d4963ef520541a782f5fc8108a168877c.1778176504.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull fsverity fix from Eric Biggers:
"Fix a regression in overlayfs caused by an fsverity API change"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
ovl: fix verity lazy-load guard broken by fsverity_active() semantic change
Pull Rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Add 'bindgen' target to make UML 32-bit builds work with GCC
- Disable two Clippy warnings ('collapsible_{if,match}')
'pin-init' crate:
- Fix unsoundness issue that created &'static references"
* tag 'rust-fixes-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: allow `clippy::collapsible_if` globally
rust: allow `clippy::collapsible_match` globally
rust: pin-init: fix incorrect accessor reference lifetime
rust: pin-init: internal: move alignment check to `make_field_check`
rust: arch: um: Fix building 32-bit UML with GCC
Pull staging driver fixes from Greg KH:
"Here are two small staging driver fixes for 7.1-rc3. They are:
- vme_user root device leak fix
- NULL dereference bugfix in the rtl8723bs driver
Both of these have been in linux-next all this week with no reported
issues"
* tag 'staging-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: os_dep: avoid NULL pointer dereference in rtw_cbuf_alloc
staging: vme_user: fix root device leak on init failure
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes for 7.1-rc3 to resolve some
reported issues, and a new device id. These are:
- usblp driver heap leak fixes
- ulpi driver memory leak fix
- typec driver fixes
- dwc3 driver fix
- omap dma driver fix
- new option driver device id addition
All of these have been in linux-next for over a week with no reported
issues"
* tag 'usb-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Telit Cinterion LE910Cx compositions
usb: usblp: fix uninitialized heap leak via LPGETSTATUS ioctl
usb: usblp: fix heap leak in IEEE 1284 device ID via short response
usb: dwc3: Move GUID programming after PHY initialization
usb: typec: tcpm: fix debug accessory mode detection for sink ports
usb: typec: tcpm: reset internal port states on soft reset AMS
usb: ulpi: fix memory leak on ulpi_register() error paths
USB: omap_udc: DMA: Don't enable burst 4 mode
Pull i2c fixes from Wolfram Sang:
- sanitize more input parameters in the core (found by syzkaller)
- usual set of driver fixes (proper completion handling, applying
quirks, correct workqueue selection...)
- ID additions to simplify dependency handling
- new email address for Peter Rosin
* tag 'i2c-for-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: smbus: reject oversized block transfers in the common path
MAINTAINERS: Update mail for Peter Rosin
i2c: stub: Reject I2C block transfers with invalid length
i2c: Compare the return value of gpiod_get_direction against GPIO_LINE_DIRECTION_OUT
i2c: dev: prevent integer overflow in I2C_TIMEOUT ioctl
i2c: acpi: Add ELAN0678 to i2c_acpi_force_100khz_device_ids
dt-bindings: i2c: apple,i2c: Add t8122 compatible
i2c: stm32f7: reinit_completion() per transfer not per msg
dt-bindings: i2c: amlogic: Add compatible for T7 SOC
i2c: testunit: Replace system_long_wq with system_dfl_long_wq
Pull powerpc fixes from Madhavan Srinivasan:
- Fix KASAN sanitization flag for core_$(BITS).o
- Fixes for handling offset values in pseries htmdump
- Fix interrupt mask in cpm1_gpiochip_add16()
- ps3/pasemi fixes to drop redundant result assignment
- Fixes in papr-hvpipe code path
- powerpc/perf: Update check for PERF_SAMPLE_DATA_SRC marked events
Thanks to Aboorva Devarajan, Athira Rajeev, Christophe Leroy (CS GROUP),
Geert Uytterhoeven, Haren Myneni, Krzysztof Kozlowski, Mukesh Kumar
Chaurasiya (IBM), Nathan Chancellor, Ritesh Harjani (IBM), Shivani
Nittor, Sourabh Jain, Thomas Zimmermann, and Venkat Rao Bagalkote.
* tag 'powerpc-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (21 commits)
powerpc/pasemi: Drop redundant res assignment
powerpc/ps3: Drop redundant result assignment
powerpc/vdso: Drop -DCC_USING_PATCHABLE_FUNCTION_ENTRY from 32-bit flags with clang
arch/powerpc: Drop CONFIG_FIRMWARE_EDID from defconfig files
powerpc/perf: Update check for PERF_SAMPLE_DATA_SRC marked events
powerpc/8xx: Fix interrupt mask in cpm1_gpiochip_add16()
powerpc/vmx: avoid KASAN instrumentation in enter_vmx_ops() for kexec
powerpc/kdump: fix KASAN sanitization flag for core_$(BITS).o
pseries/papr-hvpipe: Fix style and checkpatch issues in enable_hvpipe_IRQ()
pseries/papr-hvpipe: Refactor and simplify hvpipe_rtas_recv_msg()
pseries/papr-hvpipe: Kill task_struct pointer from struct hvpipe_source_info
pseries/papr-hvpipe: Simplify spin unlock usage in papr_hvpipe_handle_release()
pseries/papr-hvpipe: Fix the usage of copy_to_user()
pseries/papr-hvpipe: Fix & simplify error handling in papr_hvpipe_init()
pseries/papr-hvpipe: Fix null ptr deref in papr_hvpipe_dev_create_handle()
pseries/papr-hvpipe: Prevent kernel stack memory leak to userspace
pseries/papr-hvpipe: Fix race with interrupt handler
powerpc/pseries/htmdump: Add memory configuration dump support to htmdump module
powerpc/pseries/htmdump: Fix the offset value used in htm status dump
powerpc/pseries/htmdump: Fix the offset value used in processor configuration dump
...
Pull x86 fixes from Ingo Molnar:
- Fix memory map enumeration bug in the Xen e820 parsing code (Juergen
Gross)
- Re-enable e820 BIOS fallback if e820 table is empty (David Gow)
* tag 'x86-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/e820: Re-enable BIOS fallback if e820 table is empty
x86/xen: Fix a potential problem in xen_e820_resolve_conflicts()
Pull timer fix from Ingo Molnar:
"Fix CPU hotplug activation race in the timer migration code, by
Frederic Weisbecker"
* tag 'timers-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Fix another hotplug activation race
Pull scheduler fixes from Ingo Molnar:
- Fix spurious failures in rseq self-tests (Mark Brown)
- Fix rseq rseq::cpu_id_start ABI regression due to TCMalloc's creative
use of the supposedly read-only field
The fix is to introduce a new ABI variant based on a new (larger)
rseq area registration size, to keep the TCMalloc use of rseq
backwards compatible on new kernels (Thomas Gleixner)
- Fix wakeup_preempt_fair() for not waking up task (Vincent Guittot)
- Fix s64 mult overflow in vruntime_eligible() (Zhan Xusheng)
* tag 'sched-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix wakeup_preempt_fair() for not waking up task
sched/fair: Fix overflow in vruntime_eligible()
selftests/rseq: Expand for optimized RSEQ ABI v2
rseq: Reenable performance optimizations conditionally
rseq: Implement read only ABI enforcement for optimized RSEQ V2 mode
selftests/rseq: Validate legacy behavior
selftests/rseq: Make registration flexible for legacy and optimized mode
selftests/rseq: Skip tests if time slice extensions are not available
rseq: Revert to historical performance killing behaviour
rseq: Don't advertise time slice extensions if disabled
rseq: Protect rseq_reset() against interrupts
rseq: Set rseq::cpu_id_start to 0 on unregistration
selftests/rseq: Don't run tests with runner scripts outside of the scripts
Pull perf events fixes from Ingo Molnar:
- Fix deadlock in the perf_mmap() failure path (Peter Zijlstra)
- Intel ACR (Auto Counter Reload) fixes (Dapeng Mi):
- Fix validation and configuration of ACR masks
- Fix ACR rescheduling bug causing stale masks
- Disable the PMI on ACR-enabled hardware
- Enable ACR on Panther Cover uarch too
* tag 'perf-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Enable auto counter reload for DMR
perf/x86/intel: Disable PMI for self-reloaded ACR events
perf/x86/intel: Always reprogram ACR events to prevent stale masks
perf/x86/intel: Improve validation and configuration of ACR masks
perf/core: Fix deadlock in perf_mmap() failure path
Pull arm64 fix from Catalin Marinas:
- ptrace(PTRACE_SETREGSET) fix to zero the target's fpsimd_state rather
than the tracer's
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/fpsimd: ptrace: zero target's fpsimd_state, not the tracer's
Pull PCI fixes from Bjorn Helgaas:
- Don't fallback to bus reset after failed slot reset; a bus reset
isn't safe if the .reset_slot() callback is implemented (Keith Busch)
- Update saved_config_space upon resource assignment to fix passthrough
regressions when x86 pcibios_assign_resources() updates BARs (Lukas
Wunner)
- Initialize a temporary pci_dev->dev in sysfs 'new_id' attribute to
fix a lockdep regression after driver_override was moved from PCI to
device core (Samiullah Khawaja)
- Update MAINTAINERS email addresses (Marek Vasut, Hans Zhang)
- Add MAINTAINERS reviewer for PCIe Cadence IP (Aksh Garg)
* tag 'pci-v7.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
MAINTAINERS: Add Aksh Garg as PCIe CADENCE reviewer
MAINTAINERS: Update Hans Zhang email for PCIe CIX Sky1
MAINTAINERS: Update Marek Vasut email for PCIe R-Car
PCI: Initialize temporary device in new_id_store()
PCI: Update saved_config_space upon resource assignment
PCI: Don't fallback to bus reset after failed slot reset
When setting new_id of a PCI device driver using sysfs a lockdep splat
occurs. This is because new_id_store() builds a temporary pci_dev for
pci_match_device(), which calls device_match_driver_override(). That
depends on the driver_override.lock added by cb3d1049f4 ("driver core:
generalize driver_override in struct device").
The new driver_override.lock was not initialized in the temporary pci_dev,
resulting in this lockdep splat.
Initialize the temporary pci_dev to fix this.
Repro:
Build with CONFIG_LOCKDEP=y, boot with QEMU, and add a new ID:
# echo "8086 10f5" > /sys/bus/pci/drivers/e1000e/new_id
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 2 UID: 0 PID: 177 Comm: liveupdate-iomm Not tainted 7.0.0+ #9 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
register_lock_class+0x77e/0x790
lock_acquire+0xbf/0x2e0
pci_match_device+0x24/0x180
new_id_store+0x189/0x1d0
kernfs_fop_write_iter+0x14f/0x210
vfs_write+0x263/0x5e0
ksys_write+0x79/0xf0
do_syscall_64+0x117/0xf80
Fixes: 10a4206a24 ("PCI: use generic driver_override infrastructure")
Fixes: 8895d3bcb8 ("PCI: Fail new_id for vendor/device values already built into driver")
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
[bhelgaas: add commit log details and repro, trim backtrace]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260505234327.716630-1-skhawaja@google.com
Bernd reports passthrough failure of a Digital Devices Cine S2 V6 DVB
adapter plugged into an ASRock X570S PG Riptide board with BIOS version
P5.41 (09/07/2023):
ddbridge 0000:05:00.0: detected Digital Devices Cine S2 V6 DVB adapter
ddbridge 0000:05:00.0: cannot read registers
ddbridge 0000:05:00.0: fail
BIOS assigns an incorrect BAR to the DVB adapter which doesn't fit into the
upstream bridge window. The kernel corrects the BAR assignment:
pci 0000:07:00.0: BAR 0 [mem 0xfffffffffc500000-0xfffffffffc50ffff 64bit]: can't claim; no compatible bridge window
pci 0000:07:00.0: BAR 0 [mem 0xfc500000-0xfc50ffff 64bit]: assigned
Correction of the BAR assignment happens in an x86-specific fs_initcall,
pcibios_assign_resources(), after device enumeration in a subsys_initcall.
This order was introduced at the behest of Linus in 2004:
https://git.kernel.org/tglx/history/c/a06a30144bbc
No other architecture performs such a late BAR correction.
Bernd bisected the issue to commit a2f1e22390 ("PCI/ERR: Ensure error
recoverability at all times"), but it only occurs in the absence of commit
4d4c10f763 ("PCI: Explicitly put devices into D0 when initializing").
This combination exists in stable kernel v6.12.70, but not in mainline,
hence Bernd cannot reproduce the issue with mainline.
Since a2f1e22390, config space is saved on enumeration, prior to BAR
correction. Upon passthrough, the corrected BAR is overwritten with the
incorrect saved value by:
vfio_pci_core_register_device()
vfio_pci_set_power_state()
pci_restore_state()
But only if the device's current_state is PCI_UNKNOWN, as it was prior to
commit 4d4c10f763. Since the commit, it is PCI_D0, which changes the
behavior of vfio_pci_set_power_state() to no longer restore the state
without saving it first.
Alexandre is reporting the same issue as Bernd, but in his case, mainline
is affected as well. The difference is that on Alexandre's system, the
host kernel binds a driver to the device which is unbound prior to
passthrough, whereas on Bernd's system no driver gets bound by the host
kernel.
Unbinding sets current_state to PCI_UNKNOWN in pci_device_remove(), so when
vfio-pci is subsequently bound to the device, pci_restore_state() is once
again called without invoking pci_save_state() first.
To robustly fix the issue, always update saved_config_space upon resource
assignment.
Reported-by: Bernd Schumacher <bernd@bschu.de>
Closes: https://lore.kernel.org/r/acfZrlP0Ua_5D3U4@eldamar.lan/
Reported-by: Alexandre N. <an.tech@mailo.com>
Closes: https://lore.kernel.org/r/dd3c3358-de0f-4a56-9c81-04aceaab4058@mailo.com/
Fixes: a2f1e22390 ("PCI/ERR: Ensure error recoverability at all times")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Bernd Schumacher <bernd@bschu.de>
Tested-by: Alexandre N. <an.tech@mailo.com>
Cc: stable@vger.kernel.org # v6.12+
Link: https://patch.msgid.link/febc3f354e0c1f5a9f5b3ee9ffddaa44caccf651.1776268054.git.lukas@wunner.de
