There is a bug in the bpf_iter_udp_batch() function that stops
the userspace from making forward progress.
The case that triggers the bug is the userspace passed in
a very small read buffer. When the bpf prog does bpf_seq_printf,
the userspace read buffer is not enough to capture the whole bucket.
When the read buffer is not large enough, the kernel will remember
the offset of the bucket in iter->offset such that the next userspace
read() can continue from where it left off.
The kernel will skip the number (== "iter->offset") of sockets in
the next read(). However, the code directly decrements the
"--iter->offset". This is incorrect because the next read() may
not consume the whole bucket either and then the next-next read()
will start from offset 0. The net effect is the userspace will
keep reading from the beginning of a bucket and the process will
never finish. "iter->offset" must always go forward until the
whole bucket is consumed.
This patch fixes it by using a local variable "resume_offset"
and "resume_bucket". "iter->offset" is always reset to 0 before
it may be used. "iter->offset" will be advanced to the
"resume_offset" when it continues from the "resume_bucket" (i.e.
"state->bucket == resume_bucket"). This brings it closer to
the bpf_iter_tcp's offset handling which does not suffer
the same bug.
Cc: Aditi Ghag <aditi.ghag@isovalent.com>
Fixes: c96dac8d36 ("bpf: udp: Implement batching for sockets iterator")
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Aditi Ghag <aditi.ghag@isovalent.com>
Link: https://lore.kernel.org/r/20240112190530.3751661-3-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The current logic is to use a default size 16 to batch the whole bucket.
If it is too small, it will retry with a larger batch size.
The current code accidentally does a state->bucket-- before retrying.
This goes back to retry with the previous bucket which has already
been done. This patch fixed it.
It is hard to create a selftest. I added a WARN_ON(state->bucket < 0),
forced a particular port to be hashed to the first bucket,
created >16 sockets, and observed the for-loop went back
to the "-1" bucket.
Cc: Aditi Ghag <aditi.ghag@isovalent.com>
Fixes: c96dac8d36 ("bpf: udp: Implement batching for sockets iterator")
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Aditi Ghag <aditi.ghag@isovalent.com>
Link: https://lore.kernel.org/r/20240112190530.3751661-2-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
netif_txq_try_stop() uses "get_desc >= start_thrs" as the check for
the call to netif_tx_start_queue().
Use ">=" i netdev_txq_completed_mb(), too.
Fixes: c91c46de6b ("net: provide macros for commonly copied lockless queue stop/wake code")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot/KMSAN reports access to uninitialized data from gso_features_check() [1]
The repro use af_packet, injecting a gso packet and hdrlen == 0.
We could fix the issue making gso_features_check() more careful
while dealing with NETIF_F_TSO_MANGLEID in fast path.
Or we can make sure virtio_net_hdr_to_skb() pulls minimal network and
transport headers as intended.
Note that for GSO packets coming from untrusted sources, SKB_GSO_DODGY
bit forces a proper header validation (and pull) before the packet can
hit any device ndo_start_xmit(), thus we do not need a precise disection
at virtio_net_hdr_to_skb() stage.
[1]
BUG: KMSAN: uninit-value in skb_gso_segment include/net/gso.h:83 [inline]
BUG: KMSAN: uninit-value in validate_xmit_skb+0x10f2/0x1930 net/core/dev.c:3629
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x10f2/0x1930 net/core/dev.c:3629
__dev_queue_xmit+0x1eac/0x5130 net/core/dev.c:4341
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3087 [inline]
packet_sendmsg+0x8b1d/0x9f30 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
__sys_sendmsg net/socket.c:2667 [inline]
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2674
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Uninit was created at:
slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560
__alloc_skb+0x318/0x740 net/core/skbuff.c:651
alloc_skb include/linux/skbuff.h:1286 [inline]
alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334
sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2780
packet_alloc_skb net/packet/af_packet.c:2936 [inline]
packet_snd net/packet/af_packet.c:3030 [inline]
packet_sendmsg+0x70e8/0x9f30 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
__sys_sendmsg net/socket.c:2667 [inline]
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2674
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
CPU: 0 PID: 5025 Comm: syz-executor279 Not tainted 6.7.0-rc7-syzkaller-00003-gfbafc3e621c3 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
Reported-by: syzbot+7f4d0ea3df4d4fa9a65f@syzkaller.appspotmail.com
Link: https://lore.kernel.org/netdev/0000000000005abd7b060eb160cd@google.com/
Fixes: 9274124f02 ("net: stricter validation of untrusted gso packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
EROFS can select compression algorithms on a per-file basis, and each
per-file compression algorithm needs to be marked in the on-disk
superblock for initialization.
However, syzkaller can generate inconsistent crafted images that use
an unsupported algorithmtype for specific inodes, e.g. use MicroLZMA
algorithmtype even it's not set in `sbi->available_compr_algs`. This
can lead to an unexpected "BUG: kernel NULL pointer dereference" if
the corresponding decompressor isn't built-in.
Fix this by checking against `sbi->available_compr_algs` for each
m_algorithmformat request. Incorrect !erofs_sb_has_compr_cfgs preset
bitmap is now fixed together since it was harmless previously.
Reported-by: <bugreport@ubisectech.com>
Fixes: 8f89926290 ("erofs: get compression algorithms directly on mapping")
Fixes: 622ceaddb7 ("erofs: lzma compression support")
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Link: https://lore.kernel.org/r/20240113150602.1471050-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Clsact/ingress qdisc is not the only one using shared block,
red is also using it. The device tracking was originally introduced
by commit 913b47d342 ("net/sched: Introduce tc block netdev
tracking infra") for clsact/ingress only. Commit 94e2557d08 ("net:
sched: move block device tracking into tcf_block_get/put_ext()")
mistakenly enabled that for red as well.
Fix that by adding a check for the binder type being clsact when adding
device to the block->ports xarray.
Reported-by: Ido Schimmel <idosch@idosch.org>
Closes: https://lore.kernel.org/all/ZZ6JE0odnu1lLPtu@shredder/
Fixes: 94e2557d08 ("net: sched: move block device tracking into tcf_block_get/put_ext()")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently get/set_link_ksettings ethtool ops are dependent on PCS.
When PCS is integrated, it will not have separate link config.
Bypass configuring and checking PCS for integrated PCS.
Fixes: aa571b6275 ("net: stmmac: add new switch to struct plat_stmmacenet_data")
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Sneh Shah <quic_snehshah@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus pointed out that there's error handling and naming issues in the
that we should rewrite:
* Perform the access checks for the buffer before actually doing any
work instead of doing it during the iteration.
* Rename the arguments to listmount() and do_listmount() to clarify what
the arguments are used for.
* Get rid of the pointless ctr variable and overflow checking.
* Get rid of the pointless speculation check.
Link: https://lore.kernel.org/r/CAHk-=wjh6Cypo8WC-McXgSzCaou3UXccxB+7PVeSuGR8AjCphg@mail.gmail.com
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
q_usage_counter is the only thing preventing us from the limits changing
under us in __bio_split_to_limits, but blk_mq_submit_bio doesn't hold
it while calling into it.
Move the splitting inside the region where we know we've got a queue
reference. Ideally this could still remain a shared section of code, but
let's keep the fix simple and defer any refactoring here to later.
Reported-by: Christoph Hellwig <hch@lst.de>
Fixes: 900e080752 ("block: move queue enter logic into blk_mq_submit_bio()")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Eric Dumazet says:
====================
mptcp: better validation of MPTCPOPT_MP_JOIN option
Based on a syzbot report (see 4th patch in the series).
We need to be more explicit about which one of the
following flag is set by mptcp_parse_option():
- OPTION_MPTCP_MPJ_SYN
- OPTION_MPTCP_MPJ_SYNACK
- OPTION_MPTCP_MPJ_ACK
Then select the appropriate values instead of OPTIONS_MPTCP_MPJ
Paolo suggested to do the same for OPTIONS_MPTCP_MPC (5th patch)
====================
Link: https://lore.kernel.org/r/20240111194917.4044654-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
OPTIONS_MPTCP_MPC is a combination of three flags.
It would be better to be strict about testing what
flag is expected, at least for code readability.
mptcp_parse_option() already makes the distinction.
- subflow_check_req() should use OPTION_MPTCP_MPC_SYN.
- mptcp_subflow_init_cookie_req() should use OPTION_MPTCP_MPC_ACK.
- subflow_finish_connect() should use OPTION_MPTCP_MPC_SYNACK
- subflow_syn_recv_sock should use OPTION_MPTCP_MPC_ACK
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Fixes: 74c7dfbee3 ("mptcp: consolidate in_opt sub-options fields in a bitmask")
Link: https://lore.kernel.org/r/20240111194917.4044654-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull exfat updates from Namjae Jeon:
- Replace the internal table lookup algorithm with the hweight library
and ffs of the bitops library.
- Handle the two types of stream entry, valid data size (has been
written) and data size separately. It improves compatibility with two
differently sized files created on Windows.
* tag 'exfat-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: do not zero the extended part
exfat: change to get file size from DataLength
exfat: using ffs instead of internal logic
exfat: using hweight instead of internal logic
Pull bcachefs locking fix from Al Viro:
"Fix broken locking in bch2_ioctl_subvolume_destroy()"
* tag 'pull-bcachefs-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
bch2_ioctl_subvolume_destroy(): fix locking
new helper: user_path_locked_at()
Pull nfsctl update from Al Viro:
"More simple_recursive_removal() conversions.
nfsctl this time..."
* tag 'pull-simple_recursive_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
nfsctl: switch to simple_recursive_removal()
When compiling with clang-18 and W=1, I've noticed the following
warnings:
drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c:1493:16: warning: cast
from 'void (*)(struct octeon_device *, struct octeon_mbox_cmd *, void *)' to
'octeon_mbox_callback_t' (aka 'void (*)(void *, void *, void *)') converts to
incompatible function type [-Wcast-function-type-strict]
1493 | mbox_cmd.fn = (octeon_mbox_callback_t)cn23xx_get_vf_stats_callback;
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
and:
drivers/net/ethernet/cavium/liquidio/cn23xx_vf_device.c:432:16: warning: cast
from 'void (*)(struct octeon_device *, struct octeon_mbox_cmd *, void *)' to
'octeon_mbox_callback_t' (aka 'void (*)(void *, void *, void *)') converts to
incompatible function type [-Wcast-function-type-strict]
432 | mbox_cmd.fn = (octeon_mbox_callback_t)octeon_pfvf_hs_callback;
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix both of the above by adjusting 'octeon_mbox_callback_t' to match actual
callback definitions (at the cost of adding an extra forward declaration).
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240111162432.124014-1-dmantipov@yandex.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull RCU updates from Neeraj Upadhyay:
- Documentation and comment updates
- RCU torture, locktorture updates that include cleanups; nolibc init
build support for mips, ppc and rv64; testing of mid stall duration
scenario and fixing fqs task creation conditions
- Misc fixes, most notably restricting usage of RCU CPU stall
notifiers, to confine their usage primarily to debug kernels
- RCU tasks minor fixes
- lockdep annotation fix for NMI-safe accesses, callback
advancing/acceleration cleanup and documentation improvements
* tag 'rcu.release.v6.8' of https://github.com/neeraju/linux:
rcu: Force quiescent states only for ongoing grace period
doc: Clarify historical disclaimers in memory-barriers.txt
doc: Mention address and data dependencies in rcu_dereference.rst
doc: Clarify RCU Tasks reader/updater checklist
rculist.h: docs: Fix wrong function summary
Documentation: RCU: Remove repeated word in comments
srcu: Use try-lock lockdep annotation for NMI-safe access.
srcu: Explain why callbacks invocations can't run concurrently
srcu: No need to advance/accelerate if no callback enqueued
srcu: Remove superfluous callbacks advancing from srcu_gp_start()
rcu: Remove unused macros from rcupdate.h
rcu: Restrict access to RCU CPU stall notifiers
rcu-tasks: Mark RCU Tasks accesses to current->rcu_tasks_idle_cpu
rcutorture: Add fqs_holdoff check before fqs_task is created
rcutorture: Add mid-sized stall to TREE07
rcutorture: add nolibc init support for mips, ppc and rv64
locktorture: Increase Hamming distance between call_rcu_chain and rcu_call_chains
The kernel sefltest mm/hugepage-vmemmap fails on architectures which has
different page size other than 4K. In hugepage-vmemmap page size used is
4k so the pfn calculation will go wrong on systems which has different
page size .The length of MAP_HUGETLB memory must be hugepage aligned but
in hugepage-vmemmap map length is 2M so this will not get aligned if the
system has differnet hugepage size.
Added psize() to get the page size and default_huge_page_size() to
get the default hugepage size at run time, hugepage-vmemmap test pass
on powerpc with 64K page size and x86 with 4K page size.
Result on powerpc without patch (page size 64K)
*# ./hugepage-vmemmap
Returned address is 0x7effff000000 whose pfn is 0
Head page flags (100000000) is invalid
check_page_flags: Invalid argument
*#
Result on powerpc with patch (page size 64K)
*# ./hugepage-vmemmap
Returned address is 0x7effff000000 whose pfn is 600
*#
Result on x86 with patch (page size 4K)
*# ./hugepage-vmemmap
Returned address is 0x7fc7c2c00000 whose pfn is 1dac00
*#
Link: https://lkml.kernel.org/r/3b3a3ae37ba21218481c482a872bbf7526031600.1704865754.git.donettom@linux.vnet.ibm.com
Fixes: b147c89cd4 ("selftests: vm: add a hugetlb test case")
Signed-off-by: Donet Tom <donettom@linux.vnet.ibm.com>
Reported-by: Geetika Moolchandani <geetika@linux.ibm.com>
Tested-by: Geetika Moolchandani <geetika@linux.ibm.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
set_memmap_mode() stores the kernel parameter memmap mode as an integer.
However, the get_memmap_mode() function utilizes param_get_bool() to fetch
the value as a boolean, leading to potential endianness issue. On
Big-endian architectures, the memmap_on_memory is consistently displayed
as 'N' regardless of its actual status.
To address this endianness problem, the solution involves obtaining the
mode as an integer. This adjustment ensures the proper display of the
memmap_on_memory parameter, presenting it as one of the following options:
Force, Y, or N.
Link: https://lkml.kernel.org/r/20240110140127.241451-1-sumanthk@linux.ibm.com
Fixes: 2d1f649c7c ("mm/memory_hotplug: support memmap_on_memory when memmap is not aligned to pageblocks")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Suggested-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
syscore_shutdown() runs driver and module callbacks to get the system into
a state where it can be correctly shut down. In commit 6f389a8f1d ("PM
/ reboot: call syscore_shutdown() after disable_nonboot_cpus()")
syscore_shutdown() was removed from kernel_restart_prepare() and hence got
(incorrectly?) removed from the kexec flow. This was innocuous until
commit 6735150b69 ("KVM: Use syscore_ops instead of reboot_notifier to
hook restart/shutdown") changed the way that KVM registered its shutdown
callbacks, switching from reboot notifiers to syscore_ops.shutdown. As
syscore_shutdown() is missing from kexec, KVM's shutdown hook is not run
and virtualisation is left enabled on the boot CPU which results in triple
faults when switching to the new kernel on Intel x86 VT-x with VMXE
enabled.
Fix this by adding syscore_shutdown() to the kexec sequence. In terms of
where to add it, it is being added after migrating the kexec task to the
boot CPU, but before APs are shut down. It is not totally clear if this
is the best place: in commit 6f389a8f1d ("PM / reboot: call
syscore_shutdown() after disable_nonboot_cpus()") it is stated that
"syscore_ops operations should be carried with one CPU on-line and
interrupts disabled." APs are only offlined later in machine_shutdown(),
so this syscore_shutdown() is being run while APs are still online. This
seems to be the correct place as it matches where syscore_shutdown() is
run in the reboot and halt flows - they also run it before APs are shut
down. The assumption is that the commit message in commit 6f389a8f1d
("PM / reboot: call syscore_shutdown() after disable_nonboot_cpus()") is
no longer valid.
KVM has been discussed here as it is what broke loudly by not having
syscore_shutdown() in kexec, but this change impacts more than just KVM;
all drivers/modules which register a syscore_ops.shutdown callback will
now be invoked in the kexec flow. Looking at some of them like x86 MCE it
is probably more correct to also shut these down during kexec.
Maintainers of all drivers which use syscore_ops.shutdown are added on CC
for visibility. They are:
arch/powerpc/platforms/cell/spu_base.c .shutdown = spu_shutdown,
arch/x86/kernel/cpu/mce/core.c .shutdown = mce_syscore_shutdown,
arch/x86/kernel/i8259.c .shutdown = i8259A_shutdown,
drivers/irqchip/irq-i8259.c .shutdown = i8259A_shutdown,
drivers/irqchip/irq-sun6i-r.c .shutdown = sun6i_r_intc_shutdown,
drivers/leds/trigger/ledtrig-cpu.c .shutdown = ledtrig_cpu_syscore_shutdown,
drivers/power/reset/sc27xx-poweroff.c .shutdown = sc27xx_poweroff_shutdown,
kernel/irq/generic-chip.c .shutdown = irq_gc_shutdown,
virt/kvm/kvm_main.c .shutdown = kvm_shutdown,
This has been tested by doing a kexec on x86_64 and aarch64.
Link: https://lkml.kernel.org/r/20231213064004.2419447-1-jgowans@amazon.com
Fixes: 6735150b69 ("KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown")
Signed-off-by: James Gowans <jgowans@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Alexander Graf <graf@amazon.de>
Cc: Jan H. Schoenherr <jschoenh@amazon.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
GNU's addr2line can have problems parsing a vmlinux built with LLVM,
particularly when LTO was used. In order to decode the traces correctly
this patch adds the ability to switch to LLVM's utilities readelf and
addr2line. The same approach is followed by Will in [1].
Before:
$ scripts/decode_stacktrace.sh vmlinux < kernel.log
[17716.240635] Call trace:
[17716.240646] skb_cow_data (??:?)
[17716.240654] esp6_input (ld-temp.o:?)
[17716.240666] xfrm_input (ld-temp.o:?)
[17716.240674] xfrm6_rcv (??:?)
[...]
After:
$ LLVM=1 scripts/decode_stacktrace.sh vmlinux < kernel.log
[17716.240635] Call trace:
[17716.240646] skb_cow_data (include/linux/skbuff.h:2172 net/core/skbuff.c:4503)
[17716.240654] esp6_input (net/ipv6/esp6.c:977)
[17716.240666] xfrm_input (net/xfrm/xfrm_input.c:659)
[17716.240674] xfrm6_rcv (net/ipv6/xfrm6_input.c:172)
[...]
Note that one could set CROSS_COMPILE=llvm- instead to hack around this
issue. However, doing so can break the decodecode routine as it will
force the selection of other LLVM utilities down the line e.g. llvm-as.
[1] https://lore.kernel.org/all/20230914131225.13415-3-will@kernel.org/
Link: https://lkml.kernel.org/r/20230929034836.403735-1-cmllamas@google.com
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Tested-by: Justin Stitt <justinstitt@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: John Stultz <jstultz@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull pwm updates from Thierry Reding:
"This contains a bunch of cleanups and simplifications across the
board, as well as a number of small fixes.
Perhaps the most notable change here is the addition of an API that
allows PWMs to be used in atomic contexts, which is useful when time-
critical operations are involved, such as using a PWM to generate IR
signals.
Finally, I have decided to step down as PWM subsystem maintainer. Due
to other responsibilities I have lately not been able to find the time
that the subsystem deserves and Uwe, who has been helping out a lot
for the past few years and has many things planned for the future, has
kindly volunteered to take over. I have no doubt that he will be a
suitable replacement"
* tag 'pwm/for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits)
MAINTAINERS: pwm: Thierry steps down, Uwe takes over
pwm: linux/pwm.h: fix Excess kernel-doc description warning
pwm: Add pwm_apply_state() compatibility stub
pwm: cros-ec: Drop documentation for dropped struct member
pwm: Drop two unused API functions
pwm: lpc18xx-sct: Don't modify the cached period of other PWM outputs
pwm: meson: Simplify using dev_err_probe()
pwm: stmpe: Silence duplicate error messages
pwm: Reduce number of pointer dereferences in pwm_device_request()
pwm: crc: Use consistent variable naming for driver data
pwm: omap-dmtimer: Drop locking
dt-bindings: pwm: ti,pwm-omap-dmtimer: Update binding for yaml
media: pwm-ir-tx: Trigger edges from hrtimer interrupt context
pwm: bcm2835: Allow PWM driver to be used in atomic context
pwm: Make it possible to apply PWM changes in atomic context
pwm: renesas: Remove unused include
pwm: Replace ENOTSUPP with EOPNOTSUPP
pwm: Rename pwm_apply_state() to pwm_apply_might_sleep()
pwm: Stop referencing pwm->chip
pwm: Update kernel doc for struct pwm_chip
...
Pull HID updates from Jiri Kosina:
- assorted functional fixes for hid-steam ported from SteamOS betas
(Vicki Pfau)
- fix for custom sensor-hub sensors (hinge angle sensor and LISS
sensors) not working (Yauhen Kharuzhy)
- functional fix for handling Confidence in Wacom driver (Jason
Gerecke)
- support for Ilitek ili2901 touchscreen (Zhengqiao Xia)
- power management fix for Wacom userspace battery exporting
(Tatsunosuke Tobita)
- rework of wait-for-reset in order to reduce the need for
I2C_HID_QUIRK_NO_IRQ_AFTER_RESET qurk; the success rate is now 50%
better, but there are still further improvements to be made (Hans de
Goede)
- greatly improved coverage of Tablets in hid-selftests (Benjamin
Tissoires)
- support for Nintendo NSO controllers -- SNES, Genesis and N64 (Ryan
McClelland)
- support for controlling mcp2200 GPIOs (Johannes Roith)
- power management improvement for EHL OOB wakeup in intel-ish
(Kai-Heng Feng)
- other assorted device-specific fixes and code cleanups
* tag 'hid-for-linus-2024010801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (53 commits)
HID: amd_sfh: Add a new interface for exporting ALS data
HID: amd_sfh: Add a new interface for exporting HPD data
HID: amd_sfh: rename float_to_int() to amd_sfh_float_to_int()
HID: i2c-hid: elan: Add ili2901 timing
dt-bindings: HID: i2c-hid: elan: Introduce Ilitek ili2901
HID: bpf: make bus_type const in struct hid_bpf_ops
HID: make ishtp_cl_bus_type const
HID: make hid_bus_type const
HID: hid-steam: Add gamepad-only mode switched to by holding options
HID: hid-steam: Better handling of serial number length
HID: hid-steam: Update list of identifiers from SDL
HID: hid-steam: Make client_opened a counter
HID: hid-steam: Clean up locking
HID: hid-steam: Disable watchdog instead of using a heartbeat
HID: hid-steam: Avoid overwriting smoothing parameter
HID: magicmouse: fix kerneldoc for struct magicmouse_sc
HID: sensor-hub: Enable hid core report processing for all devices
HID: wacom: Add additional tests of confidence behavior
HID: wacom: Correct behavior when processing some confidence == false touches
HID: nintendo: add support for nso controllers
...
Pull fbdev updates from Helge Deller:
"Three fbdev drivers (~8500 lines of code) removed. The Carillo Ranch
fbdev driver is for an Intel product which was never shipped, and for
the intelfb and the amba-clcd drivers the drm drivers can be used
instead.
The other code changes are minor: some fb_deferred_io flushing fixes,
imxfb margin fixes and stifb cleanups.
Summary:
- Remove intelfb fbdev driver (Thomas Zimmermann)
- Remove amba-clcd fbdev driver (Linus Walleij)
- Remove vmlfb Carillo Ranch fbdev driver (Matthew Wilcox)
- fb_deferred_io flushing fixes (Nam Cao)
- imxfb code fixes and cleanups (Dario Binacchi)
- stifb primary screen detection cleanups (Thomas Zimmermann)"
* tag 'fbdev-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (28 commits)
fbdev/intelfb: Remove driver
fbdev/hyperv_fb: Do not clear global screen_info
firmware/sysfb: Clear screen_info state after consuming it
fbdev/hyperv_fb: Remove firmware framebuffers with aperture helpers
drm/hyperv: Remove firmware framebuffers with aperture helper
fbdev/sis: Remove dependency on screen_info
video/logo: use %u format specifier for unsigned int values
video/sticore: Remove info field from STI struct
arch/parisc: Detect primary video device from device instance
fbdev/stifb: Allocate fb_info instance with framebuffer_alloc()
video/sticore: Store ROM device in STI struct
fbdev: flush deferred IO before closing
fbdev: flush deferred work in fb_deferred_io_fsync()
fbdev: amba-clcd: Delete the old CLCD driver
fbdev: Remove support for Carillo Ranch driver
fbdev: hgafb: fix kernel-doc comments
fbdev: mmp: Fix typo and wording in code comment
fbdev: fsl-diu-fb: Fix sparse warning due to virt_to_phys() prototype change
fbdev: imxfb: add '*/' on a separate line in block comment
fbdev: imxfb: use __func__ for function name
...
Pull media updates from Mauro Carvalho Chehab:
- v4l core: subdev frame interval now supports which field
- v4l kapi: moves and renames the init_cfg pad op to init_state as an
internal op.
- new sensor drivers: gc0308, gc2145, Avnet Alvium, ov64a40, tw9900
- new camera driver: STM32 DCMIPP
- s5p-mfc has gained MFC v12 support
- new ISP driver added to staging: Starfive
- new stateful encoder/decoded: Wave5 codec It is found on the J721S2
SoC, JH7100 SoC, ssd202d SoC. Etc.
- fwnode gained support for MIPI "DisCo for Imaging"
(https://www.mipi.org/specifications/mipi-disco-imaging)
- as usual, lots of cleanups, fixups and driver improvements.
* tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (309 commits)
media: i2c: thp7312: select CONFIG_FW_LOADER
media: i2c: mt9m114: use fsleep() in place of udelay()
media: videobuf2: core: Rename min_buffers_needed field in vb2_queue
media: i2c: thp7312: Store frame interval in subdev state
media: docs: uAPI: Fix documentation of 'which' field for routing ioctls
media: docs: uAPI: Expand error documentation for invalid 'which' value
media: docs: uAPI: Clarify error documentation for invalid 'which' value
media: v4l2-subdev: Store frame interval in subdev state
media: v4l2-subdev: Add which field to struct v4l2_subdev_frame_interval
media: v4l2-subdev: Turn .[gs]_frame_interval into pad operations
media: v4l: subdev: Move out subdev state lock macros outside CONFIG_MEDIA_CONTROLLER
media: s5p-mfc: DPB Count Independent of VIDIOC_REQBUF
media: s5p-mfc: Load firmware for each run in MFCv12.
media: s5p-mfc: Set context for valid case before calling try_run
media: s5p-mfc: Add support for DMABUF for encoder
media: s5p-mfc: Add support for UHD encoding.
media: s5p-mfc: Add support for rate controls in MFCv12
media: s5p-mfc: Add YV12 and I420 multiplanar format support
media: s5p-mfc: Add initial support for MFCv12
media: s5p-mfc: Rename IS_MFCV10 macro
...
Pull libnvdimm updates from Ira Weiny:
"A mix of bug fixes and updates to interfaces used by nvdimm:
- Updates to interfaces include:
Use the new scope based management
Remove deprecated ida interfaces
Update to sysfs_emit()
- Fixup kdoc comments"
* tag 'libnvdimm-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
acpi/nfit: Use sysfs_emit() for all attributes
nvdimm/namespace: fix kernel-doc for function params
nvdimm/dimm_devs: fix kernel-doc for function params
nvdimm/btt: fix btt_blk_cleanup() kernel-doc
nvdimm-btt: simplify code with the scope based resource management
nvdimm: Remove usage of the deprecated ida_simple_xx() API
ACPI: NFIT: Use cleanup.h helpers instead of devm_*()
Pull MMC updates from Ulf Hansson:
"MMC core:
- Don't force a retune before eMMC RPMB switch
- Add optional HS400 tuning in HS400es initialization
- Add a sysfs node to for write-protect-group-size
- Add re-tuning test to the mmc-test module
- Use mrq.sbc to support close-ended ioctl requests
MMC host:
- mmci: Add support for SDIO in-band irqs for the stm32 variant
- mmc_spi: Remove broken support custom DMA mapped buffers
- mtk-sd: Improve and extend the support for tunings
- renesas_sdhi: Document support for the RZ/Five variant
- sdhci_am654: Drop support for the ti,otap-del-sel DT property
- sdhci-brcmstb: Add support for the brcm 74165b0 variant
- sdhci-msm: Add compatibles for IPQ4019 and IPQ8074
- sdhci-of-dwcmshc: Add support for the T-Head TH1520 variant
- sdhci-xenon: Add support for the Marvell ac5 variant"
* tag 'mmc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (27 commits)
mmc: xenon: Add ac5 support via bounce buffer
dt-bindings: mmc: add Marvell ac5
mmc: sdhci-brcmstb: add new sdhci reset sequence for brcm 74165b0
dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 74165b0
mmc: core: Do not force a retune before RPMB switch
mmc: core: Add HS400 tuning in HS400es initialization
mmc: sdhci_omap: Fix TI SoC dependencies
mmc: sdhci_am654: Fix TI SoC dependencies
mmc: core: Add wp_grp_size sysfs node
mmc: mmc_test: Add re-tuning test
mmc: mmc_spi: remove custom DMA mapped buffers
dt-bindings: mmc: sdhci-msm: document dedicated IPQ4019 and IPQ8074
dt-bindings: mmc: synopsys-dw-mshc: add iommus for Intel SocFPGA
mmc: mtk-sd: Extend number of tuning steps
dt-bindings: mmc: mtk-sd: add tuning steps related property
mmc: sdhci-omap: don't misuse kernel-doc marker
mmc: mtk-sd: Increase the verbosity of msdc_track_cmd_data
mmc: core: Use mrq.sbc in close-ended ffu
mmc: sdhci_am654: Drop lookup for deprecated ti,otap-del-sel
mmc: sdhci-of-dwcmshc: Use logical OR instead of bitwise OR in dwcmshc_probe()
...
Pull pmdomain updates from Ulf Hansson:
"Core:
- Move the generic PM domain and its governor to the pmdomain
subsystem
- Drop the unused pm_genpd_opp_to_performance_state()
Providers:
- Convert some providers to let the ->remove() callback return void
- amlogic: Add support for G12A ISP power domain
- arm: Move the SCPI power-domain driver to the pmdomain subsystem
- arm: Move Kconfig options to the pmdomain subsystem
- qcom: Update part number to X1E80100 for the rpmhpd"
* tag 'pmdomain-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
PM: domains: Move genpd and its governor to the pmdomain subsystem
PM: domains: Drop redundant header for genpd
PM: domains: Drop the unused pm_genpd_opp_to_performance_state()
PM: domains: fix domain_governor kernel-doc warnings
pmdomain: xilinx/zynqmp: Convert to platform remove callback returning void
pmdomain: qcom-cpr: Convert to platform remove callback returning void
pmdomain: imx93-pd: Convert to platform remove callback returning void
pmdomain: imx93-blk-ctrl: Convert to platform remove callback returning void
pmdomain: imx8mp-blk-ctrl: Convert to platform remove callback returning void
pmdomain: imx8m-blk-ctrl: Convert to platform remove callback returning void
pmdomain: imx-gpcv2: Convert to platform remove callback returning void
pmdomain: imx-gpc: Convert to platform remove callback returning void
pmdomain: imx-pgc: Convert to platform remove callback returning void
pmdomain: amlogic: meson-ee-pwrc: add support for G12A ISP power domain
dt-bindings: power: meson-g12a-power: document ISP power domain
firmware: arm_scpi: Move power-domain driver to the pmdomain dir
pmdomain: arm_scmi: Move Kconfig options to the pmdomain subsystem
pmdomain: qcom: rpmhpd: Update part number to X1E80100
dt-bindings: power: rpmpd: Update part number to X1E80100
Pull rdma updates from Jason Gunthorpe:
"Small cycle, with some typical driver updates:
- General code tidying in siw, hfi1, idrdma, usnic, hns rtrs and
bnxt_re
- Many small siw cleanups without an overeaching theme
- Debugfs stats for hns
- Fix a TX queue timeout in IPoIB and missed locking of the mcast
list
- Support more features of P7 devices in bnxt_re including a new work
submission protocol
- CQ interrupts for MANA
- netlink stats for erdma
- EFA multipath PCI support
- Fix Incorrect MR invalidation in iser"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (66 commits)
RDMA/bnxt_re: Fix error code in bnxt_re_create_cq()
RDMA/efa: Add EFA query MR support
IB/iser: Prevent invalidating wrong MR
RDMA/erdma: Add hardware statistics support
RDMA/erdma: Introduce dma pool for hardware responses of CMDQ requests
IB/iser: iscsi_iser.h: fix kernel-doc warning and spellos
RDMA/mana_ib: Add CQ interrupt support for RAW QP
RDMA/mana_ib: query device capabilities
RDMA/mana_ib: register RDMA device with GDMA
RDMA/bnxt_re: Fix the sparse warnings
RDMA/bnxt_re: Fix the offset for GenP7 adapters for user applications
RDMA/bnxt_re: Share a page to expose per CQ info with userspace
RDMA/bnxt_re: Add UAPI to share a page with user space
IB/ipoib: Fix mcast list locking
RDMA/mlx5: Expose register c0 for RDMA device
net/mlx5: E-Switch, expose eswitch manager vport
net/mlx5: Manage ICM type of SW encap
RDMA/mlx5: Support handling of SW encap ICM area
net/mlx5: Introduce indirect-sw-encap ICM properties
RDMA/bnxt_re: Adds MSN table capability for Gen P7 adapters
...
Pull firewire updates from Takashi Sakamoto:
"This includes the series of changes related to device attributes, as
well as slight code refactoring.
Some old devices are recognized to have legacy layout of configuration
ROM. They have an inconvenience that FireWire subsystem adds no
attributes for vendor information to corresponding devices. The main
purpose of this update is to rectify the inconvenience.
We have a slight concern about regression. The update changes the
value of modalias for the unit devices by populating its model field,
which was previously left as zero in the case. I've assessed the
potential impact of this change and anticipate it to have minimal
concern for both the kernel and user lands. The change is enough
acceptable"
* tag 'firewire-updates-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: fill model field in modalias of unit device for legacy layout of configuration ROM
firewire: core: detect model name for legacy layout of configuration ROM
firewire: core: detect numeric model identifier for legacy layout of configuration ROM
firewire: test: add test of device attributes for legacy AV/C device
firewire: test: add test of device attributes for simple AV/C device
firewire: test: add KUnit test for device attributes
firewire: core: replace magic number with macro
firewire: core: adds constant qualifier for local helper functions
firewire: make fw_bus_type const
