Avoiding unused variable warnings when using this macro adds
complexity that in simple cases like this one is not justified
for the small saving in data.
Include linux/mod_devicetable.h which includes the definition of
struct acpi_device_id (hence somewhat related to the main change)
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-15-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In general the complexity of avoiding maybe unused variable warnings is
not worth dealing with for the small amount of data saved. In thie
case, the i2c driver does include some other code under a CONFIG_ACPI
guard but remove the ACPI_PTR() usage anyway to bring keep it inline
with the spi driver.
Drop include of linux/acpi.h in the spi driver that doesn't need
it as struct acpi_device_id is defined in mod_devicetable.h which
is already included.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-9-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This driver supports 32*3 combinations of fixed ranges and transfer
functions, plus custom ranges.
So statistically a user has more than 99% chance that the provided
default configuration will generate invalid pressure readings if the
bindings are not initialized and the driver is instantiated via sysfs.
The current patch removes this loophole making sure the driver loads
only if the firmware properties are present.
Co-developed-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Link: https://lore.kernel.org/r/20231229092445.30180-7-petre.rodan@subdimension.ro
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Improve driver error resilience by ignoring the measurement if any of
the 3 error flags gets set while interacting with the sensor.
Based on the datasheet, in table 14 on page 14, the status byte
contains:
bit 5 busy flag - 1 if device is busy
bit 2 memory integrity/error flag - 1 if integrity test failed
bit 0 math saturation - 1 if internal math saturation has occurred
Co-developed-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Link: https://lore.kernel.org/r/20231229092445.30180-6-petre.rodan@subdimension.ro
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AMS AS7331 is a UV light sensor with three channels: UVA, UVB and
UVC (also known as deep UV and referenced as DUV in the iio core).
Its internal structure and forming blocks are practically identical to
the ones the AS73211 contains: API, internal DAC, I2C interface and
registers, measurement modes, number of channels and pinout.
The only difference between them is the photodiodes used to acquire
light, which means that only some modifications are required to add
support for the AS7331 in the existing driver.
The temperature channel is identical for both devices and only the
channel modifiers of the IIO_INTENSITY channels need to account for the
device type.
The scale values have been obtained from the chapter "7.5 Transfer
Function" of the official datasheet[1] for the configuration chosen as
basis (Nclk = 1024 and GAIN = 1). Those values keep the units from the
datasheet (nW/cm^2), as opposed to the units used for the AS73211
(nW/m^2).
Add a new device-specific data structure to account for the device
differences: channel types and scale of LSB per channel.
[1] https://ams.com/documents/20143/9106314/AS7331_DS001047_4-00.pdf
Tested-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This device has the same properties and I2C addresses as the as73211.
The only difference between them is the photodiodes they use internally,
which in this case is irrelevant for the bindings.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The scale values associated to the light channels are calculated as a
division that can be better expressed as an IIO_VAL_FRACTIONAL type
instead of the current IIO_VAL_INT.
Note that the constant values used for the calculation were scaled up to
work with integers, turning the nW/cm^2 units from the datasheet into
nW/m^2, which would not be necessary with the IIO_VAL_FRACTIONAL type.
But to avoid issues from current users of the driver, the units must be
kept.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Pull more bcachefs updates from Kent Overstreet:
"Some fixes, Some refactoring, some minor features:
- Assorted prep work for disk space accounting rewrite
- BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
makes our trigger context more explicit
- A few fixes to avoid excessive transaction restarts on
multithreaded workloads: fstests (in addition to ktest tests) are
now checking slowpath counters, and that's shaking out a few bugs
- Assorted tracepoint improvements
- Starting to break up bcachefs_format.h and move on disk types so
they're with the code they belong to; this will make room to start
documenting the on disk format better.
- A few minor fixes"
* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
bcachefs: Improve inode_to_text()
bcachefs: logged_ops_format.h
bcachefs: reflink_format.h
bcachefs; extents_format.h
bcachefs: ec_format.h
bcachefs: subvolume_format.h
bcachefs: snapshot_format.h
bcachefs: alloc_background_format.h
bcachefs: xattr_format.h
bcachefs: dirent_format.h
bcachefs: inode_format.h
bcachefs; quota_format.h
bcachefs: sb-counters_format.h
bcachefs: counters.c -> sb-counters.c
bcachefs: comment bch_subvolume
bcachefs: bch_snapshot::btime
bcachefs: add missing __GFP_NOWARN
bcachefs: opts->compression can now also be applied in the background
bcachefs: Prep work for variable size btree node buffers
bcachefs: grab s_umount only if snapshotting
...
Pull timer updates from Thomas Gleixner:
"Updates for time and clocksources:
- A fix for the idle and iowait time accounting vs CPU hotplug.
The time is reset on CPU hotplug which makes the accumulated
systemwide time jump backwards.
- Assorted fixes and improvements for clocksource/event drivers"
* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
clocksource/drivers/ep93xx: Fix error handling during probe
clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
clocksource/timer-riscv: Add riscv_clock_shutdown callback
dt-bindings: timer: Add StarFive JH8100 clint
dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs
Pull powerpc fixes from Aneesh Kumar:
- Increase default stack size to 32KB for Book3S
Thanks to Michael Ellerman.
* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Increase default stack size to 32KB
Add a field to bch_snapshot for creation time; this will be important
when we start exposing the snapshot tree to userspace.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
